Examples/RegistrationITKv3/ImageRegistration12.cxx

/*=========================================================================
 *
 *  Copyright Insight Software Consortium
 *
 *  Licensed under the Apache License, Version 2.0 (the "License");
 *  you may not use this file except in compliance with the License.
 *  You may obtain a copy of the License at
 *
 *         http://www.apache.org/licenses/LICENSE-2.0.txt
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS,
 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 *=========================================================================*/

// Software Guide : BeginLatex
//
// This example illustrates the use SpatialObjects as masks for selecting the
// pixels that should contribute to the computation of Image Metrics. This
// example is almost identical to ImageRegistration6 with the exception that
// the SpatialObject masks are created and passed to the image metric.
//
//
// Software Guide : EndLatex

#include "itkImageRegistrationMethod.h"
#include "itkMeanSquaresImageToImageMetric.h"
#include "itkRegularStepGradientDescentOptimizer.h"

#include "itkCenteredRigid2DTransform.h"
#include "itkCenteredTransformInitializer.h"

#include "itkImageFileReader.h"
#include "itkImageFileWriter.h"

#include "itkResampleImageFilter.h"
#include "itkCastImageFilter.h"
#include "itkSquaredDifferenceImageFilter.h"

//  Software Guide : BeginLatex
//
//  The most important header in this example is the one corresponding to the
//  \doxygen{ImageMaskSpatialObject} class.
//
//  \index{itk::ImageMaskSpatialObject!header}
//
//  Software Guide : EndLatex

// Software Guide : BeginCodeSnippet
#include "itkImageMaskSpatialObject.h"
// Software Guide : EndCodeSnippet

//
//  The following section of code implements a command observer
//  that will monitor the evolution of the registration process.
//
#include "itkCommand.h"
class CommandIterationUpdate : public itk::Command
{
public:
  typedef  CommandIterationUpdate   Self;
  typedef  itk::Command             Superclass;
  typedef itk::SmartPointer<Self>   Pointer;
  itkNewMacro( Self );

protected:
  CommandIterationUpdate() {};

public:
  typedef itk::RegularStepGradientDescentOptimizer OptimizerType;
  typedef const OptimizerType *                    OptimizerPointer;

  void Execute(itk::Object *caller, const itk::EventObject & event) ITK_OVERRIDE
    {
    Execute( (const itk::Object *)caller, event);
    }

  void Execute(const itk::Object * object, const itk::EventObject & event) ITK_OVERRIDE
    {
    OptimizerPointer optimizer = static_cast< OptimizerPointer >( object );
    if( ! itk::IterationEvent().CheckEvent( &event ) )
      {
      return;
      }
    std::cout << optimizer->GetCurrentIteration() << "   ";
    std::cout << optimizer->GetValue() << "   ";
    std::cout << optimizer->GetCurrentPosition() << std::endl;
    }
};

int main( int argc, char *argv[] )
{
  if( argc < 5 )
    {
    std::cerr << "Missing Parameters " << std::endl;
    std::cerr << "Usage: " << argv[0];
    std::cerr << " fixedImageFile  movingImageFile fixedImageMaskFile";
    std::cerr << " outputImagefile  [differenceOutputfile] ";
    std::cerr << " [differenceBeforeRegistration] "<< std::endl;
    return EXIT_FAILURE;
    }

  const    unsigned int    Dimension = 2;
  typedef  float           PixelType;

  typedef itk::Image< PixelType, Dimension >  FixedImageType;
  typedef itk::Image< PixelType, Dimension >  MovingImageType;

  typedef itk::CenteredRigid2DTransform< double > TransformType;

  typedef itk::RegularStepGradientDescentOptimizer       OptimizerType;
  typedef itk::MeanSquaresImageToImageMetric<
                                    FixedImageType,
                                    MovingImageType >    MetricType;
  typedef itk:: LinearInterpolateImageFunction<
                                    MovingImageType,
                                    double          >    InterpolatorType;
  typedef itk::ImageRegistrationMethod<
                                    FixedImageType,
                                    MovingImageType >    RegistrationType;

  MetricType::Pointer         metric        = MetricType::New();
  OptimizerType::Pointer      optimizer     = OptimizerType::New();
  InterpolatorType::Pointer   interpolator  = InterpolatorType::New();
  RegistrationType::Pointer   registration  = RegistrationType::New();

  registration->SetMetric(        metric        );
  registration->SetOptimizer(     optimizer     );
  registration->SetInterpolator(  interpolator  );

  TransformType::Pointer  transform = TransformType::New();
  registration->SetTransform( transform );

  typedef itk::ImageFileReader< FixedImageType  > FixedImageReaderType;
  typedef itk::ImageFileReader< MovingImageType > MovingImageReaderType;
  FixedImageReaderType::Pointer  fixedImageReader  = FixedImageReaderType::New();
  MovingImageReaderType::Pointer movingImageReader = MovingImageReaderType::New();

  fixedImageReader->SetFileName(  argv[1] );
  movingImageReader->SetFileName( argv[2] );

  registration->SetFixedImage(    fixedImageReader->GetOutput()    );
  registration->SetMovingImage(   movingImageReader->GetOutput()   );
  fixedImageReader->Update();

  registration->SetFixedImageRegion(
     fixedImageReader->GetOutput()->GetBufferedRegion() );

  typedef itk::CenteredTransformInitializer<
                                    TransformType,
                                    FixedImageType,
                                    MovingImageType >  TransformInitializerType;
  TransformInitializerType::Pointer initializer = TransformInitializerType::New();

  initializer->SetTransform(   transform );
  initializer->SetFixedImage(  fixedImageReader->GetOutput() );
  initializer->SetMovingImage( movingImageReader->GetOutput() );

  initializer->MomentsOn();

  initializer->InitializeTransform();

  transform->SetAngle( 0.0 );

  registration->SetInitialTransformParameters( transform->GetParameters() );

  typedef OptimizerType::ScalesType       OptimizerScalesType;
  OptimizerScalesType optimizerScales( transform->GetNumberOfParameters() );
  const double translationScale = 1.0 / 1000.0;

  optimizerScales[0] = 1.0;
  optimizerScales[1] = translationScale;
  optimizerScales[2] = translationScale;
  optimizerScales[3] = translationScale;
  optimizerScales[4] = translationScale;

  optimizer->SetScales( optimizerScales );

  optimizer->SetMaximumStepLength( 0.1    );
  optimizer->SetMinimumStepLength( 0.001 );
  optimizer->SetNumberOfIterations( 200 );

  // Create the Command observer and register it with the optimizer.
  //
  CommandIterationUpdate::Pointer observer = CommandIterationUpdate::New();
  optimizer->AddObserver( itk::IterationEvent(), observer );

  //  Software Guide : BeginLatex
  //
  //  Here we instantiate the type of the \doxygen{ImageMaskSpatialObject}
  //  using the same dimension of the images to be registered.
  //
  //  \index{itk::ImageMaskSpatialObject!Instantiation}
  //
  //  Software Guide : EndLatex

  // Software Guide : BeginCodeSnippet
  typedef itk::ImageMaskSpatialObject< Dimension >   MaskType;
  // Software Guide : EndCodeSnippet

  //  Software Guide : BeginLatex
  //
  //  Then we use the type for creating the spatial object mask that will
  //  restrict the registration to a reduced region of the image.
  //
  //  \index{itk::ImageMaskSpatialObject!New}
  //  \index{itk::ImageMaskSpatialObject!Pointer}
  //
  //  Software Guide : EndLatex

  // Software Guide : BeginCodeSnippet
  MaskType::Pointer  spatialObjectMask = MaskType::New();
  // Software Guide : EndCodeSnippet

  //  Software Guide : BeginLatex
  //
  //  The mask in this case is read from a binary file using the
  //  \code{ImageFileReader} instantiated for an \code{unsigned char} pixel
  //  type.
  //
  //  Software Guide : EndLatex

  // Software Guide : BeginCodeSnippet
  typedef itk::Image< unsigned char, Dimension >   ImageMaskType;

  typedef itk::ImageFileReader< ImageMaskType >    MaskReaderType;
  // Software Guide : EndCodeSnippet

  //  Software Guide : BeginLatex
  //
  //  The reader is constructed and a filename is passed to it.
  //
  //  Software Guide : EndLatex

  // Software Guide : BeginCodeSnippet
  MaskReaderType::Pointer  maskReader = MaskReaderType::New();

  maskReader->SetFileName( argv[3] );
  // Software Guide : EndCodeSnippet

  //  Software Guide : BeginLatex
  //
  //  As usual, the reader is triggered by invoking its \code{Update()} method.
  //  Since this may eventually throw an exception, the call must be placed in
  //  a \code{try/catch} block. Note that a full fledged application will place
  //  this \code{try/catch} block at a much higher level, probably under the
  //  control of the GUI.
  //
  //  Software Guide : EndLatex

  // Software Guide : BeginCodeSnippet
  try
    {
    maskReader->Update();
    }
  catch( itk::ExceptionObject & err )
    {
    std::cerr << "ExceptionObject caught !" << std::endl;
    std::cerr << err << std::endl;
    return EXIT_FAILURE;
    }
  // Software Guide : EndCodeSnippet

  //  Software Guide : BeginLatex
  //
  //  The output of the mask reader is connected as input to the
  //  \code{ImageMaskSpatialObject}.
  //
  //  \index{itk::ImageMaskSpatialObject!SetImage()}
  //
  //  Software Guide : EndLatex

  // Software Guide : BeginCodeSnippet
  spatialObjectMask->SetImage( maskReader->GetOutput() );
  // Software Guide : EndCodeSnippet

  //  Software Guide : BeginLatex
  //
  //  Finally, the spatial object mask is passed to the image metric.
  //
  //  \index{itk::ImageToImageMetric!SetFixedImage()}
  //
  //  Software Guide : EndLatex

  // Software Guide : BeginCodeSnippet
  metric->SetFixedImageMask( spatialObjectMask );
  // Software Guide : EndCodeSnippet

  try
    {
    registration->Update();
    std::cout << "Optimizer stop condition = "
              << registration->GetOptimizer()->GetStopConditionDescription()
              << std::endl;
    }
  catch( itk::ExceptionObject & err )
    {
    std::cerr << "ExceptionObject caught !" << std::endl;
    std::cerr << err << std::endl;
    return EXIT_FAILURE;
    }

  OptimizerType::ParametersType finalParameters =
                    registration->GetLastTransformParameters();

  const double finalAngle           = finalParameters[0];
  const double finalRotationCenterX = finalParameters[1];
  const double finalRotationCenterY = finalParameters[2];
  const double finalTranslationX    = finalParameters[3];
  const double finalTranslationY    = finalParameters[4];

  const unsigned int numberOfIterations = optimizer->GetCurrentIteration();
  const double bestValue = optimizer->GetValue();

  // Print out results
  //
  const double finalAngleInDegrees = finalAngle * 45.0 / std::atan(1.0);

  std::cout << "Result = " << std::endl;
  std::cout << " Angle (radians) " << finalAngle  << std::endl;
  std::cout << " Angle (degrees) " << finalAngleInDegrees  << std::endl;
  std::cout << " Center X      = " << finalRotationCenterX  << std::endl;
  std::cout << " Center Y      = " << finalRotationCenterY  << std::endl;
  std::cout << " Translation X = " << finalTranslationX  << std::endl;
  std::cout << " Translation Y = " << finalTranslationY  << std::endl;
  std::cout << " Iterations    = " << numberOfIterations << std::endl;
  std::cout << " Metric value  = " << bestValue          << std::endl;

  //  Software Guide : BeginLatex
  //
  //  Let's execute this example over some of the images provided in
  //  \code{Examples/Data}, for example:
  //
  //  \begin{itemize}
  //  \item \code{BrainProtonDensitySliceBorder20.png}
  //  \item \code{BrainProtonDensitySliceR10X13Y17.png}
  //  \end{itemize}
  //
  //  The second image is the result of intentionally rotating the first
  //  image by $10$ degrees and shifting it $13mm$ in $X$ and $17mm$ in
  //  $Y$. Both images have unit-spacing and are shown in Figure
  //  \ref{fig:FixedMovingImageRegistration5}.
  //
  //  Software Guide : EndLatex

  // Software Guide : BeginCodeSnippet
  transform->SetParameters( finalParameters );

  TransformType::MatrixType matrix = transform->GetMatrix();
  TransformType::OffsetType offset = transform->GetOffset();

  std::cout << "Matrix = " << std::endl << matrix << std::endl;
  std::cout << "Offset = " << std::endl << offset << std::endl;
  // Software Guide : EndCodeSnippet

  //  Software Guide : BeginLatex
  //
  //  Now we resample the moving image using the transform resulting from the
  //  registration process.
  //
  //  Software Guide : EndLatex

  typedef itk::ResampleImageFilter<
                            MovingImageType,
                            FixedImageType >    ResampleFilterType;
  TransformType::Pointer finalTransform = TransformType::New();

  finalTransform->SetParameters( finalParameters );
  finalTransform->SetFixedParameters( transform->GetFixedParameters() );

  ResampleFilterType::Pointer resample = ResampleFilterType::New();

  resample->SetTransform( finalTransform );
  resample->SetInput( movingImageReader->GetOutput() );

  FixedImageType::Pointer fixedImage = fixedImageReader->GetOutput();

  resample->SetSize(    fixedImage->GetLargestPossibleRegion().GetSize() );
  resample->SetOutputOrigin(  fixedImage->GetOrigin() );
  resample->SetOutputSpacing( fixedImage->GetSpacing() );
  resample->SetOutputDirection( fixedImage->GetDirection() );
  resample->SetDefaultPixelValue( 100 );

  typedef  unsigned char  OutputPixelType;

  typedef itk::Image< OutputPixelType, Dimension > OutputImageType;

  typedef itk::CastImageFilter<
                        FixedImageType,
                        OutputImageType > CastFilterType;

  typedef itk::ImageFileWriter< OutputImageType >  WriterType;

  WriterType::Pointer      writer =  WriterType::New();
  CastFilterType::Pointer  caster =  CastFilterType::New();

  writer->SetFileName( argv[4] );

  caster->SetInput( resample->GetOutput() );
  writer->SetInput( caster->GetOutput()   );
  writer->Update();

  typedef itk::SquaredDifferenceImageFilter<
                                  FixedImageType,
                                  FixedImageType,
                                  OutputImageType > DifferenceFilterType;

  DifferenceFilterType::Pointer difference = DifferenceFilterType::New();

  WriterType::Pointer writer2 = WriterType::New();
  writer2->SetInput( difference->GetOutput() );

  // Compute the difference image between the
  // fixed and resampled moving image.
  if( argc >= 6 )
    {
    difference->SetInput1( fixedImageReader->GetOutput() );
    difference->SetInput2( resample->GetOutput() );
    writer2->SetFileName( argv[5] );
    writer2->Update();
    }

  // Compute the difference image between the
  // fixed and moving image before registration.
  if( argc >= 7 )
    {
    writer2->SetFileName( argv[6] );
    difference->SetInput1( fixedImageReader->GetOutput() );
    difference->SetInput2( movingImageReader->GetOutput() );
    writer2->Update();
    }

  return EXIT_SUCCESS;
}