Examples/Statistics/ScalarImageKmeansClassifier.cxx

/*=========================================================================
 *
 *  Copyright Insight Software Consortium
 *
 *  Licensed under the Apache License, Version 2.0 (the "License");
 *  you may not use this file except in compliance with the License.
 *  You may obtain a copy of the License at
 *
 *         http://www.apache.org/licenses/LICENSE-2.0.txt
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS,
 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 *=========================================================================*/

//  Software Guide : BeginCommandLineArgs
//    INPUTS:  {BrainT1Slice.png}
//    OUTPUTS: {BrainT1Slice_labelled.png}
//    ARGUMENTS:    1 3 14.8 91.6 134.9
//  Software Guide : EndCommandLineArgs

// Software Guide : BeginLatex
//
// This example shows how to use the KMeans model for classifying the pixel of
// a scalar image.
//
// The  \subdoxygen{Statistics}{ScalarImageKmeansImageFilter} is used for taking
// a scalar image and applying the K-Means algorithm in order to define classes
// that represents statistical distributions of intensity values in the pixels.
// The classes are then used in this filter for generating a labeled image where
// every pixel is assigned to one of the classes.
//
// Software Guide : EndLatex


// Software Guide : BeginCodeSnippet
#include "itkImage.h"
#include "itkImageFileReader.h"
#include "itkImageFileWriter.h"
#include "itkScalarImageKmeansImageFilter.h"
// Software Guide : EndCodeSnippet

int main( int argc, char * argv [] )
{
  if( argc < 5 )
    {
    std::cerr << "Usage: " << std::endl;
    std::cerr << argv[0];
    std::cerr << " inputScalarImage outputLabeledImage nonContiguousLabels";
    std::cerr << " numberOfClasses mean1 mean2... meanN " << std::endl;
    return EXIT_FAILURE;
    }

  const char * inputImageFileName = argv[1];


  // Software Guide : BeginLatex
  //
  // First we define the pixel type and dimension of the image that we intend to
  // classify. With this image type we can also declare the
  // \doxygen{ImageFileReader} needed for reading the input image, create one and
  // set its input filename.
  //
  // Software Guide : EndLatex

  // Software Guide : BeginCodeSnippet
  typedef signed short       PixelType;
  const unsigned int         Dimension = 2;

  typedef itk::Image<PixelType, Dimension > ImageType;

  typedef itk::ImageFileReader< ImageType > ReaderType;
  ReaderType::Pointer reader = ReaderType::New();
  reader->SetFileName( inputImageFileName );
  // Software Guide : EndCodeSnippet


  // Software Guide : BeginLatex
  //
  // With the \code{ImageType} we instantiate the type of the
  // \doxygen{ScalarImageKmeansImageFilter} that will compute the K-Means model
  // and then classify the image pixels.
  //
  // Software Guide : EndLatex

  // Software Guide : BeginCodeSnippet
  typedef itk::ScalarImageKmeansImageFilter< ImageType > KMeansFilterType;

  KMeansFilterType::Pointer kmeansFilter = KMeansFilterType::New();

  kmeansFilter->SetInput( reader->GetOutput() );

  const unsigned int numberOfInitialClasses = atoi( argv[4] );
  // Software Guide : EndCodeSnippet


  // Software Guide : BeginLatex
  //
  // In general the classification will produce as output an image whose pixel
  // values are integers associated to the labels of the classes. Since typically
  // these integers will be generated in order (0,1,2,...N), the output image
  // will tend to look very dark when displayed with naive viewers. It is
  // therefore convenient to have the option of spreading the label values over
  // the dynamic range of the output image pixel type. When this is done, the
  // dynamic range of the pixels is divided by the number of classes in order to
  // define the increment between labels. For example, an output image of 8 bits
  // will have a dynamic range of [0:256], and when it is used for holding four
  // classes, the non-contiguous labels will be (0,64,128,192). The selection of
  // the mode to use is done with the method \code{SetUseNonContiguousLabels()}.
  //
  // Software Guide : EndLatex

  // Software Guide : BeginCodeSnippet
  const unsigned int useNonContiguousLabels = atoi( argv[3] );

  kmeansFilter->SetUseNonContiguousLabels( useNonContiguousLabels );
  // Software Guide : EndCodeSnippet


  const unsigned int argoffset = 5;

  if( static_cast<unsigned int>(argc) <
      numberOfInitialClasses + argoffset )
    {
    std::cerr << "Error: " << std::endl;
    std::cerr << numberOfInitialClasses << " classes has been specified ";
    std::cerr << "but no enough means have been provided in the command ";
    std::cerr << "line arguments " << std::endl;
    return EXIT_FAILURE;
    }


  // Software Guide : BeginLatex
  //
  // For each one of the classes we must provide a tentative initial value for
  // the mean of the class. Given that this is a scalar image, each one of the
  // means is simply a scalar value. Note however that in a general case of
  // K-Means, the input image would be a vector image and therefore the means
  // will be vectors of the same dimension as the image pixels.
  //
  // Software Guide : EndLatex


  // Software Guide : BeginCodeSnippet
  for( unsigned k=0; k < numberOfInitialClasses; k++ )
    {
    const double userProvidedInitialMean = atof( argv[k+argoffset] );
    kmeansFilter->AddClassWithInitialMean( userProvidedInitialMean );
    }
  // Software Guide : EndCodeSnippet


  const char * outputImageFileName = argv[2];


  // Software Guide : BeginLatex
  //
  // The \doxygen{ScalarImageKmeansImageFilter} is predefined for producing an 8
  // bits scalar image as output. This output image contains labels associated
  // to each one of the classes in the K-Means algorithm. In the following lines
  // we use the \code{OutputImageType} in order to instantiate the type of a
  // \doxygen{ImageFileWriter}. Then create one, and connect it to the output of
  // the classification filter.
  //
  // Software Guide : EndLatex

  // Software Guide : BeginCodeSnippet
  typedef KMeansFilterType::OutputImageType  OutputImageType;

  typedef itk::ImageFileWriter< OutputImageType > WriterType;

  WriterType::Pointer writer = WriterType::New();

  writer->SetInput( kmeansFilter->GetOutput() );

  writer->SetFileName( outputImageFileName );
  // Software Guide : EndCodeSnippet


  // Software Guide : BeginLatex
  //
  // We are now ready for triggering the execution of the pipeline. This is done
  // by simply invoking the \code{Update()} method in the writer. This call will
  // propagate the update request to the reader and then to the classifier.
  //
  // Software Guide : EndLatex


  // Software Guide : BeginCodeSnippet
  try
    {
    writer->Update();
    }
  catch( itk::ExceptionObject & excp )
    {
    std::cerr << "Problem encountered while writing ";
    std::cerr << " image file : " << argv[2] << std::endl;
    std::cerr << excp << std::endl;
    return EXIT_FAILURE;
    }
  // Software Guide : EndCodeSnippet


  // Software Guide : BeginLatex
  //
  // At this point the classification is done, the labeled image is saved in a
  // file, and we can take a look at the means that were found as a result of the
  // model estimation performed inside the classifier filter.
  //
  // Software Guide : EndLatex

  // Software Guide : BeginCodeSnippet
  KMeansFilterType::ParametersType estimatedMeans =
                                            kmeansFilter->GetFinalMeans();

  const unsigned int numberOfClasses = estimatedMeans.Size();

  for ( unsigned int i = 0; i < numberOfClasses; ++i )
    {
    std::cout << "cluster[" << i << "] ";
    std::cout << "    estimated mean : " << estimatedMeans[i] << std::endl;
    }

  // Software Guide : EndCodeSnippet

  //  Software Guide : BeginLatex
  //
  // \begin{figure} \center
  // \includegraphics[width=0.44\textwidth]{BrainT1Slice_labelled}
  // \itkcaption[Output of the KMeans classifier]{Effect of the
  // KMeans classifier on a T1 slice of the brain.}
  // \label{fig:ScalarImageKMeansClassifierOutput}
  // \end{figure}
  //
  //  Figure \ref{fig:ScalarImageKMeansClassifierOutput}
  //  illustrates the effect of this filter with three classes.
  //  The means were estimated by ScalarImageKmeansModelEstimator.cxx.
  //
  //  Software Guide : EndLatex

  return EXIT_SUCCESS;

}