ITK  4.8.0
Insight Segmentation and Registration Toolkit
Examples/Filtering/DigitallyReconstructedRadiograph1.cxx
/*=========================================================================
*
* Copyright Insight Software Consortium
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0.txt
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
*=========================================================================*/
// Software Guide : BeginLatex
//
// This example illustrates the use of the
// \code{RayCastInterpolateImageFunction} class to generate digitally
// reconstructed radiographs (DRRs) from a 3D image volume such as CT
// or MR.
//
// Software Guide : EndLatex
#include "itkImage.h"
// Software Guide : BeginLatex
//
// The \code{RayCastInterpolateImageFunction} class definition for
// this example is contained in the following header file.
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
// Software Guide : EndCodeSnippet
//#define WRITE_CUBE_IMAGE_TO_FILE
void usage()
{
std::cerr << "\n";
std::cerr << "Usage: DRR <options> [input]\n";
std::cerr << " calculates the Digitally Reconstructed Radiograph from \n";
std::cerr << " a volume. \n\n";
std::cerr << " where <options> is one or more of the following:\n\n";
std::cerr << " <-h> Display (this) usage information\n";
std::cerr << " <-v> Verbose output [default: no]\n";
std::cerr << " <-res float float> Pixel spacing of the output image [default: 1x1mm] \n";
std::cerr << " <-size int int> Dimension of the output image [default: 501x501] \n";
std::cerr << " <-sid float> Distance of ray source (focal point) [default: 400mm]\n";
std::cerr << " <-t float float float> Translation parameter of the camera \n";
std::cerr << " <-rx float> Rotation around x,y,z axis in degrees \n";
std::cerr << " <-ry float>\n";
std::cerr << " <-rz float>\n";
std::cerr << " <-normal float float> The 2D projection normal position [default: 0x0mm]\n";
std::cerr << " <-cor float float float> The centre of rotation relative to centre of volume\n";
std::cerr << " <-threshold float> Threshold [default: 0]\n";
std::cerr << " <-o file> Output image filename\n\n";
std::cerr << " by thomas@hartkens.de\n";
std::cerr << " and john.hipwell@kcl.ac.uk (CISG London)\n\n";
exit(1);
}
int main( int argc, char *argv[] )
{
char *input_name = ITK_NULLPTR;
char *output_name = ITK_NULLPTR;
bool ok;
bool verbose = false;
float rx = 0.;
float ry = 0.;
float rz = 0.;
float tx = 0.;
float ty = 0.;
float tz = 0.;
float cx = 0.;
float cy = 0.;
float cz = 0.;
float sid = 400.;
float sx = 1.;
float sy = 1.;
int dx = 501;
int dy = 501;
float o2Dx = 0;
float o2Dy = 0;
double threshold=0;
// Parse command line parameters
while (argc > 1)
{
ok = false;
if ((ok == false) && (strcmp(argv[1], "-h") == 0))
{
argc--; argv++;
ok = true;
usage();
}
if ((ok == false) && (strcmp(argv[1], "-v") == 0))
{
argc--; argv++;
ok = true;
verbose = true;
}
if ((ok == false) && (strcmp(argv[1], "-rx") == 0))
{
argc--; argv++;
ok = true;
rx=atof(argv[1]);
argc--; argv++;
}
if ((ok == false) && (strcmp(argv[1], "-ry") == 0))
{
argc--; argv++;
ok = true;
ry=atof(argv[1]);
argc--; argv++;
}
if ((ok == false) && (strcmp(argv[1], "-rz") == 0))
{
argc--; argv++;
ok = true;
rz=atof(argv[1]);
argc--; argv++;
}
if ((ok == false) && (strcmp(argv[1], "-threshold") == 0))
{
argc--; argv++;
ok = true;
threshold=atof(argv[1]);
argc--; argv++;
}
if ((ok == false) && (strcmp(argv[1], "-t") == 0))
{
argc--; argv++;
ok = true;
tx=atof(argv[1]);
argc--; argv++;
ty=atof(argv[1]);
argc--; argv++;
tz=atof(argv[1]);
argc--; argv++;
}
if ((ok == false) && (strcmp(argv[1], "-cor") == 0))
{
argc--; argv++;
ok = true;
cx=atof(argv[1]);
argc--; argv++;
cy=atof(argv[1]);
argc--; argv++;
cz=atof(argv[1]);
argc--; argv++;
}
if ((ok == false) && (strcmp(argv[1], "-res") == 0))
{
argc--; argv++;
ok = true;
sx=atof(argv[1]);
argc--; argv++;
sy=atof(argv[1]);
argc--; argv++;
}
if ((ok == false) && (strcmp(argv[1], "-size") == 0))
{
argc--; argv++;
ok = true;
dx=atoi(argv[1]);
argc--; argv++;
dy=atoi(argv[1]);
argc--; argv++;
}
if ((ok == false) && (strcmp(argv[1], "-sid") == 0))
{
argc--; argv++;
ok = true;
sid=atof(argv[1]);
argc--; argv++;
}
if ((ok == false) && (strcmp(argv[1], "-normal") == 0))
{
argc--; argv++;
ok = true;
o2Dx=atof(argv[1]);
argc--; argv++;
o2Dy=atof(argv[1]);
argc--; argv++;
}
if ((ok == false) && (strcmp(argv[1], "-o") == 0))
{
argc--; argv++;
ok = true;
output_name = argv[1];
argc--; argv++;
}
if (ok == false)
{
if (input_name == ITK_NULLPTR)
{
input_name = argv[1];
argc--;
argv++;
}
else
{
std::cerr << "ERROR: Can not parse argument " << argv[1] << std::endl;
usage();
}
}
}
if (verbose)
{
if (input_name) std::cout << "Input image: " << input_name << std::endl;
if (output_name) std::cout << "Output image: " << output_name << std::endl;
}
// Software Guide : BeginLatex
//
// Although we generate a 2D projection of the 3D volume for the
// purposes of the interpolator both images must be three dimensional.
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
const unsigned int Dimension = 3;
typedef short InputPixelType;
typedef unsigned char OutputPixelType;
InputImageType::Pointer image;
// Software Guide : EndCodeSnippet
// Software Guide : BeginLatex
//
// For the purposes of this example we assume the input volume has
// been loaded into an \code{itk::Image image}.
//
// Software Guide : EndLatex
if (input_name)
{
ReaderType::Pointer reader = ReaderType::New();
reader->SetFileName( input_name );
try
{
reader->Update();
}
catch( itk::ExceptionObject & err )
{
std::cerr << "ERROR: ExceptionObject caught !" << std::endl;
std::cerr << err << std::endl;
return EXIT_FAILURE;
}
image = reader->GetOutput();
}
else
{ // No input image specified so create a cube
image = InputImageType::New();
InputImageType::SpacingType spacing;
spacing[0] = 3.;
spacing[1] = 3.;
spacing[2] = 3.;
image->SetSpacing( spacing );
InputImageType::PointType origin;
origin[0] = 0.;
origin[1] = 0.;
origin[2] = 0.;
image->SetOrigin( origin );
InputImageType::IndexType start;
start[0] = 0; // first index on X
start[1] = 0; // first index on Y
start[2] = 0; // first index on Z
InputImageType::SizeType size;
size[0] = 61; // size along X
size[1] = 61; // size along Y
size[2] = 61; // size along Z
InputImageType::RegionType region;
region.SetSize( size );
region.SetIndex( start );
image->SetRegions( region );
image->Allocate(true); // initialize to zero.
image->Update();
IteratorType iterate( image, image->GetLargestPossibleRegion() );
while ( ! iterate.IsAtEnd() )
{
InputImageType::IndexType idx = iterate.GetIndex();
if ( (idx[0] >= 6) && (idx[0] <= 54)
&& (idx[1] >= 6) && (idx[1] <= 54)
&& (idx[2] >= 6) && (idx[2] <= 54)
&& ( ( ((idx[0] <= 11) || (idx[0] >= 49))
&& ((idx[1] <= 11) || (idx[1] >= 49)))
|| ( ((idx[0] <= 11) || (idx[0] >= 49))
&& ((idx[2] <= 11) || (idx[2] >= 49)))
|| ( ((idx[1] <= 11) || (idx[1] >= 49))
&& ((idx[2] <= 11) || (idx[2] >= 49))) ))
{
iterate.Set(10);
}
else if ( (idx[0] >= 18) && (idx[0] <= 42)
&& (idx[1] >= 18) && (idx[1] <= 42)
&& (idx[2] >= 18) && (idx[2] <= 42)
&& ( ( ((idx[0] <= 23) || (idx[0] >= 37))
&& ((idx[1] <= 23) || (idx[1] >= 37)))
|| ( ((idx[0] <= 23) || (idx[0] >= 37))
&& ((idx[2] <= 23) || (idx[2] >= 37)))
|| ( ((idx[1] <= 23) || (idx[1] >= 37))
&& ((idx[2] <= 23) || (idx[2] >= 37))) ))
{
iterate.Set(60);
}
else if ((idx[0] == 30) && (idx[1] == 30) && (idx[2] == 30))
{
iterate.Set(100);
}
++iterate;
}
#ifdef WRITE_CUBE_IMAGE_TO_FILE
char *filename = "cube.gipl";
WriterType::Pointer writer = WriterType::New();
writer->SetFileName( filename );
writer->SetInput( image );
try
{
std::cout << "Writing image: " << filename << std::endl;
writer->Update();
}
catch( itk::ExceptionObject & err )
{
std::cerr << "ERROR: ExceptionObject caught !" << std::endl;
std::cerr << err << std::endl;
return EXIT_FAILURE;
}
#endif
}
// Print out the details of the input volume
if (verbose)
{
unsigned int i;
const InputImageType::SpacingType spacing = image->GetSpacing();
std::cout << std::endl << "Input ";
InputImageType::RegionType region = image->GetBufferedRegion();
region.Print(std::cout);
std::cout << " Resolution: [";
for (i=0; i<Dimension; i++)
{
std::cout << spacing[i];
if (i < Dimension-1) std::cout << ", ";
}
std::cout << "]" << std::endl;
const InputImageType::PointType origin = image->GetOrigin();
std::cout << " Origin: [";
for (i=0; i<Dimension; i++)
{
std::cout << origin[i];
if (i < Dimension-1) std::cout << ", ";
}
std::cout << "]" << std::endl<< std::endl;
}
// Software Guide : BeginLatex
//
// Creation of a \code{ResampleImageFilter} enables coordinates for
// each of the pixels in the DRR image to be generated. These
// coordinates are used by the \code{RayCastInterpolateImageFunction}
// to determine the equation of each corresponding ray which is cast
// through the input volume.
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
FilterType::Pointer filter = FilterType::New();
filter->SetInput( image );
filter->SetDefaultPixelValue( 0 );
// Software Guide : EndCodeSnippet
// Software Guide : BeginLatex
//
// An Euler transformation is defined to position the input volume.
// The \code{ResampleImageFilter} uses this transform to position the
// output DRR image for the desired view.
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
TransformType::Pointer transform = TransformType::New();
transform->SetComputeZYX(true);
TransformType::OutputVectorType translation;
translation[0] = tx;
translation[1] = ty;
translation[2] = tz;
// constant for converting degrees into radians
const double dtr = ( std::atan(1.0) * 4.0 ) / 180.0;
transform->SetTranslation( translation );
transform->SetRotation( dtr*rx, dtr*ry, dtr*rz );
InputImageType::PointType imOrigin = image->GetOrigin();
InputImageType::SpacingType imRes = image->GetSpacing();
typedef InputImageType::RegionType InputImageRegionType;
typedef InputImageRegionType::SizeType InputImageSizeType;
InputImageRegionType imRegion = image->GetBufferedRegion();
InputImageSizeType imSize = imRegion.GetSize();
imOrigin[0] += imRes[0] * static_cast<double>( imSize[0] ) / 2.0;
imOrigin[1] += imRes[1] * static_cast<double>( imSize[1] ) / 2.0;
imOrigin[2] += imRes[2] * static_cast<double>( imSize[2] ) / 2.0;
TransformType::InputPointType center;
center[0] = cx + imOrigin[0];
center[1] = cy + imOrigin[1];
center[2] = cz + imOrigin[2];
transform->SetCenter(center);
if (verbose)
{
std::cout << "Image size: "
<< imSize[0] << ", " << imSize[1] << ", " << imSize[2]
<< std::endl << " resolution: "
<< imRes[0] << ", " << imRes[1] << ", " << imRes[2]
<< std::endl << " origin: "
<< imOrigin[0] << ", " << imOrigin[1] << ", " << imOrigin[2]
<< std::endl << " center: "
<< center[0] << ", " << center[1] << ", " << center[2]
<< std::endl << "Transform: " << transform << std::endl;
}
// Software Guide : EndCodeSnippet
// Software Guide : BeginLatex
//
// The \code{RayCastInterpolateImageFunction} is instantiated and passed the transform
// object. The \code{RayCastInterpolateImageFunction} uses this
// transform to reposition the x-ray source such that the DRR image
// and x-ray source move as one around the input volume. This coupling
// mimics the rigid geometry of the x-ray gantry.
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
InterpolatorType;
InterpolatorType::Pointer interpolator = InterpolatorType::New();
interpolator->SetTransform(transform);
// Software Guide : EndCodeSnippet
// Software Guide : BeginLatex
//
// We can then specify a threshold above which the volume's
// intensities will be integrated.
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
interpolator->SetThreshold(threshold);
// Software Guide : EndCodeSnippet
// Software Guide : BeginLatex
//
// The ray-cast interpolator needs to know the initial position of the
// ray source or focal point. In this example we place the input
// volume at the origin and halfway between the ray source and the
// screen. The distance between the ray source and the screen
// is the "source to image distance" \code{sid} and is specified by
// the user.
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
InterpolatorType::InputPointType focalpoint;
focalpoint[0]= imOrigin[0];
focalpoint[1]= imOrigin[1];
focalpoint[2]= imOrigin[2] - sid/2.;
interpolator->SetFocalPoint(focalpoint);
// Software Guide : EndCodeSnippet
if (verbose)
{
std::cout << "Focal Point: "
<< focalpoint[0] << ", "
<< focalpoint[1] << ", "
<< focalpoint[2] << std::endl;
}
// Software Guide : BeginLatex
//
// Having initialised the interpolator we pass the object to the
// resample filter.
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
interpolator->Print (std::cout);
filter->SetInterpolator( interpolator );
filter->SetTransform( transform );
// Software Guide : EndCodeSnippet
// Software Guide : BeginLatex
//
// The size and resolution of the output DRR image is specified via the
// resample filter.
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
// setup the scene
InputImageType::SizeType size;
size[0] = dx; // number of pixels along X of the 2D DRR image
size[1] = dy; // number of pixels along Y of the 2D DRR image
size[2] = 1; // only one slice
filter->SetSize( size );
InputImageType::SpacingType spacing;
spacing[0] = sx; // pixel spacing along X of the 2D DRR image [mm]
spacing[1] = sy; // pixel spacing along Y of the 2D DRR image [mm]
spacing[2] = 1.0; // slice thickness of the 2D DRR image [mm]
filter->SetOutputSpacing( spacing );
// Software Guide : EndCodeSnippet
if (verbose)
{
std::cout << "Output image size: "
<< size[0] << ", "
<< size[1] << ", "
<< size[2] << std::endl;
std::cout << "Output image spacing: "
<< spacing[0] << ", "
<< spacing[1] << ", "
<< spacing[2] << std::endl;
}
// Software Guide : BeginLatex
//
// In addition the position of the DRR is specified. The default
// position of the input volume, prior to its transformation is
// half-way between the ray source and screen and unless specified
// otherwise the normal from the "screen" to the ray source passes
// directly through the centre of the DRR.
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
double origin[ Dimension ];
origin[0] = imOrigin[0] + o2Dx - sx*((double) dx - 1.)/2.;
origin[1] = imOrigin[1] + o2Dy - sy*((double) dy - 1.)/2.;
origin[2] = imOrigin[2] + sid/2.;
filter->SetOutputOrigin( origin );
// Software Guide : EndCodeSnippet
if (verbose)
{
std::cout << "Output image origin: "
<< origin[0] << ", "
<< origin[1] << ", "
<< origin[2] << std::endl;
}
// create writer
if (output_name)
{
// Software Guide : BeginLatex
//
// The output of the resample filter can then be passed to a writer to
// save the DRR image to a file.
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
InputImageType, OutputImageType > RescaleFilterType;
RescaleFilterType::Pointer rescaler = RescaleFilterType::New();
rescaler->SetOutputMinimum( 0 );
rescaler->SetOutputMaximum( 255 );
rescaler->SetInput( filter->GetOutput() );
WriterType::Pointer writer = WriterType::New();
writer->SetFileName( output_name );
writer->SetInput( rescaler->GetOutput() );
try
{
std::cout << "Writing image: " << output_name << std::endl;
writer->Update();
}
catch( itk::ExceptionObject & err )
{
std::cerr << "ERROR: ExceptionObject caught !" << std::endl;
std::cerr << err << std::endl;
}
// Software Guide : EndCodeSnippet
}
else
{
filter->Update();
}
return EXIT_SUCCESS;
}