WikiExamples/Registration/MutualInformation.cxx

#include "itkImageRegistrationMethod.h"
#include "itkTranslationTransform.h"
#include "itkMutualInformationImageToImageMetric.h"
#include "itkGradientDescentOptimizer.h"
#include "itkNormalizeImageFilter.h"
#include "itkDiscreteGaussianImageFilter.h"
#include "itkResampleImageFilter.h"
#include "itkCastImageFilter.h"
#include "itkCheckerBoardImageFilter.h"
#include "itkEllipseSpatialObject.h"
#include "itkSpatialObjectToImageFilter.h"
#include "itkImageFileWriter.h"

const    unsigned int    Dimension = 2;
typedef  unsigned char           PixelType;

typedef itk::Image< PixelType, Dimension >  ImageType;

static void CreateEllipseImage(ImageType::Pointer image);
static void CreateCircleImage(ImageType::Pointer image);

int main( int argc, char *argv[] )
{
  // Generate synthetic fixed and moving images
  ImageType::Pointer  fixedImage = ImageType::New();
  CreateCircleImage(fixedImage);
  ImageType::Pointer movingImage = ImageType::New();
  CreateEllipseImage(movingImage);

  // Write the two synthetic inputs
  typedef itk::ImageFileWriter< ImageType >  WriterType;

  WriterType::Pointer      fixedWriter =  WriterType::New();
  fixedWriter->SetFileName("fixed.png");
  fixedWriter->SetInput( fixedImage);
  fixedWriter->Update();

  WriterType::Pointer      movingWriter =  WriterType::New();
  movingWriter->SetFileName("moving.png");
  movingWriter->SetInput( movingImage);
  movingWriter->Update();

  // We use floats internally
  typedef   float                                    InternalPixelType;
  typedef itk::Image< float, 2> InternalImageType;

  // Normalize the images
  typedef itk::NormalizeImageFilter<ImageType, InternalImageType> NormalizeFilterType;

  NormalizeFilterType::Pointer fixedNormalizer = NormalizeFilterType::New();
  NormalizeFilterType::Pointer movingNormalizer = NormalizeFilterType::New();

  fixedNormalizer->SetInput(  fixedImage);
  movingNormalizer->SetInput( movingImage);

  // Smooth the normalized images
  typedef itk::DiscreteGaussianImageFilter<InternalImageType,InternalImageType> GaussianFilterType;

  GaussianFilterType::Pointer fixedSmoother  = GaussianFilterType::New();
  GaussianFilterType::Pointer movingSmoother = GaussianFilterType::New();

  fixedSmoother->SetVariance( 2.0 );
  movingSmoother->SetVariance( 2.0 );

  fixedSmoother->SetInput( fixedNormalizer->GetOutput() );
  movingSmoother->SetInput( movingNormalizer->GetOutput() );

  typedef itk::TranslationTransform< double, Dimension > TransformType;
  typedef itk::GradientDescentOptimizer                  OptimizerType;
  typedef itk::LinearInterpolateImageFunction<
                                    InternalImageType,
                                    double             > InterpolatorType;
  typedef itk::ImageRegistrationMethod<
                                    InternalImageType,
                                    InternalImageType >  RegistrationType;
  typedef itk::MutualInformationImageToImageMetric<
                                          InternalImageType,
                                          InternalImageType >    MetricType;

  TransformType::Pointer      transform     = TransformType::New();
  OptimizerType::Pointer      optimizer     = OptimizerType::New();
  InterpolatorType::Pointer   interpolator  = InterpolatorType::New();
  RegistrationType::Pointer   registration  = RegistrationType::New();

  registration->SetOptimizer(     optimizer     );
  registration->SetTransform(     transform     );
  registration->SetInterpolator(  interpolator  );

  MetricType::Pointer         metric        = MetricType::New();
  registration->SetMetric( metric  );

  //  The metric requires a number of parameters to be selected, including
  //  the standard deviation of the Gaussian kernel for the fixed image
  //  density estimate, the standard deviation of the kernel for the moving
  //  image density and the number of samples use to compute the densities
  //  and entropy values. Details on the concepts behind the computation of
  //  the metric can be found in Section
  //  \ref{sec:MutualInformationMetric}.  Experience has
  //  shown that a kernel standard deviation of $0.4$ works well for images
  //  which have been normalized to a mean of zero and unit variance.  We
  //  will follow this empirical rule in this example.

  metric->SetFixedImageStandardDeviation(  0.4 );
  metric->SetMovingImageStandardDeviation( 0.4 );

  registration->SetFixedImage(    fixedSmoother->GetOutput()    );
  registration->SetMovingImage(   movingSmoother->GetOutput()   );

  fixedNormalizer->Update();
  ImageType::RegionType fixedImageRegion =
       fixedNormalizer->GetOutput()->GetBufferedRegion();
  registration->SetFixedImageRegion( fixedImageRegion );

  typedef RegistrationType::ParametersType ParametersType;
  ParametersType initialParameters( transform->GetNumberOfParameters() );

  initialParameters[0] = 0.0;  // Initial offset along X
  initialParameters[1] = 0.0;  // Initial offset along Y

  registration->SetInitialTransformParameters( initialParameters );

  //  Software Guide : BeginLatex
  //
  //  We should now define the number of spatial samples to be considered in
  //  the metric computation. Note that we were forced to postpone this setting
  //  until we had done the preprocessing of the images because the number of
  //  samples is usually defined as a fraction of the total number of pixels in
  //  the fixed image.
  //
  //  The number of spatial samples can usually be as low as $1\%$ of the total
  //  number of pixels in the fixed image. Increasing the number of samples
  //  improves the smoothness of the metric from one iteration to another and
  //  therefore helps when this metric is used in conjunction with optimizers
  //  that rely of the continuity of the metric values. The trade-off, of
  //  course, is that a larger number of samples result in longer computation
  //  times per every evaluation of the metric.
  //
  //  It has been demonstrated empirically that the number of samples is not a
  //  critical parameter for the registration process. When you start fine
  //  tuning your own registration process, you should start using high values
  //  of number of samples, for example in the range of $20\%$ to $50\%$ of the
  //  number of pixels in the fixed image. Once you have succeeded to register
  //  your images you can then reduce the number of samples progressively until
  //  you find a good compromise on the time it takes to compute one evaluation
  //  of the Metric. Note that it is not useful to have very fast evaluations
  //  of the Metric if the noise in their values results in more iterations
  //  being required by the optimizer to converge. You must then study the
  //  behavior of the metric values as the iterations progress.
  
  const unsigned int numberOfPixels = fixedImageRegion.GetNumberOfPixels();

  const unsigned int numberOfSamples =
                        static_cast< unsigned int >( numberOfPixels * 0.01 );

  metric->SetNumberOfSpatialSamples( numberOfSamples );

  //  Since larger values of mutual information indicate better matches than
  //  smaller values, we need to maximize the cost function in this example.
  //  By default the GradientDescentOptimizer class is set to minimize the
  //  value of the cost-function. It is therefore necessary to modify its
  //  default behavior by invoking the \code{MaximizeOn()} method.
  //  Additionally, we need to define the optimizer's step size using the
  //  \code{SetLearningRate()} method.

  optimizer->SetLearningRate( 15.0 );
  optimizer->SetNumberOfIterations( 200 );
  optimizer->MaximizeOn(); // We want to maximize mutual information (the default of the optimizer is to minimize)

  // Note that large values of the learning rate will make the optimizer
  // unstable. Small values, on the other hand, may result in the optimizer
  // needing too many iterations in order to walk to the extrema of the cost
  // function. The easy way of fine tuning this parameter is to start with
  // small values, probably in the range of $\{5.0,10.0\}$. Once the other
  // registration parameters have been tuned for producing convergence, you
  // may want to revisit the learning rate and start increasing its value until
  // you observe that the optimization becomes unstable.  The ideal value for
  // this parameter is the one that results in a minimum number of iterations
  // while still keeping a stable path on the parametric space of the
  // optimization. Keep in mind that this parameter is a multiplicative factor
  // applied on the gradient of the Metric. Therefore, its effect on the
  // optimizer step length is proportional to the Metric values themselves.
  // Metrics with large values will require you to use smaller values for the
  // learning rate in order to maintain a similar optimizer behavior.

  try
    {
    registration->Update();
    std::cout << "Optimizer stop condition: "
              << registration->GetOptimizer()->GetStopConditionDescription()
              << std::endl;
    }
  catch( itk::ExceptionObject & err )
    {
    std::cout << "ExceptionObject caught !" << std::endl;
    std::cout << err << std::endl;
    return EXIT_FAILURE;
    }

  ParametersType finalParameters = registration->GetLastTransformParameters();

  double TranslationAlongX = finalParameters[0];
  double TranslationAlongY = finalParameters[1];

  unsigned int numberOfIterations = optimizer->GetCurrentIteration();

  double bestValue = optimizer->GetValue();


  // Print out results
  std::cout << std::endl;
  std::cout << "Result = " << std::endl;
  std::cout << " Translation X = " << TranslationAlongX  << std::endl;
  std::cout << " Translation Y = " << TranslationAlongY  << std::endl;
  std::cout << " Iterations    = " << numberOfIterations << std::endl;
  std::cout << " Metric value  = " << bestValue          << std::endl;
  std::cout << " Numb. Samples = " << numberOfSamples    << std::endl;

  typedef itk::ResampleImageFilter<
                            ImageType,
                            ImageType >    ResampleFilterType;

  TransformType::Pointer finalTransform = TransformType::New();

  finalTransform->SetParameters( finalParameters );
  finalTransform->SetFixedParameters( transform->GetFixedParameters() );

  ResampleFilterType::Pointer resample = ResampleFilterType::New();

  resample->SetTransform( finalTransform );
  resample->SetInput( movingImage);

  resample->SetSize(    fixedImage->GetLargestPossibleRegion().GetSize() );
  resample->SetOutputOrigin(  fixedImage->GetOrigin() );
  resample->SetOutputSpacing( fixedImage->GetSpacing() );
  resample->SetOutputDirection( fixedImage->GetDirection() );
  resample->SetDefaultPixelValue( 100 );

  WriterType::Pointer      writer =  WriterType::New();
  writer->SetFileName("output.png");
  writer->SetInput( resample->GetOutput()   );
  writer->Update();

  return EXIT_SUCCESS;
}


void CreateEllipseImage(ImageType::Pointer image)
{
  typedef itk::EllipseSpatialObject< Dimension >   EllipseType;

  typedef itk::SpatialObjectToImageFilter<
    EllipseType, ImageType >   SpatialObjectToImageFilterType;

  SpatialObjectToImageFilterType::Pointer imageFilter =
    SpatialObjectToImageFilterType::New();

  ImageType::SizeType size;
  size[ 0 ] =  100;
  size[ 1 ] =  100;

  imageFilter->SetSize( size );

  ImageType::SpacingType spacing;
  spacing.Fill(1);
  imageFilter->SetSpacing(spacing);

  EllipseType::Pointer ellipse    = EllipseType::New();
  EllipseType::ArrayType radiusArray;
  radiusArray[0] = 10;
  radiusArray[1] = 20;
  ellipse->SetRadius(radiusArray);

  typedef EllipseType::TransformType                 TransformType;
  TransformType::Pointer transform = TransformType::New();
  transform->SetIdentity();

  TransformType::OutputVectorType  translation;
  TransformType::CenterType        center;

  translation[ 0 ] =  65;
  translation[ 1 ] =  45;
  transform->Translate( translation, false );

  ellipse->SetObjectToParentTransform( transform );

  imageFilter->SetInput(ellipse);

  ellipse->SetDefaultInsideValue(255);
  ellipse->SetDefaultOutsideValue(0);
  imageFilter->SetUseObjectValue( true );
  imageFilter->SetOutsideValue( 0 );

  imageFilter->Update();

  image->Graft(imageFilter->GetOutput());

}

void CreateCircleImage(ImageType::Pointer image)
{
 typedef itk::EllipseSpatialObject< Dimension >   EllipseType;

  typedef itk::SpatialObjectToImageFilter<
    EllipseType, ImageType >   SpatialObjectToImageFilterType;

  SpatialObjectToImageFilterType::Pointer imageFilter =
    SpatialObjectToImageFilterType::New();

  ImageType::SizeType size;
  size[ 0 ] =  100;
  size[ 1 ] =  100;

  imageFilter->SetSize( size );

  ImageType::SpacingType spacing;
  spacing.Fill(1);
  imageFilter->SetSpacing(spacing);

  EllipseType::Pointer ellipse    = EllipseType::New();
  EllipseType::ArrayType radiusArray;
  radiusArray[0] = 10;
  radiusArray[1] = 10;
  ellipse->SetRadius(radiusArray);

  typedef EllipseType::TransformType                 TransformType;
  TransformType::Pointer transform = TransformType::New();
  transform->SetIdentity();

  TransformType::OutputVectorType  translation;
  TransformType::CenterType        center;

  translation[ 0 ] =  50;
  translation[ 1 ] =  50;
  transform->Translate( translation, false );

  ellipse->SetObjectToParentTransform( transform );

  imageFilter->SetInput(ellipse);

  ellipse->SetDefaultInsideValue(255);
  ellipse->SetDefaultOutsideValue(0);
  imageFilter->SetUseObjectValue( true );
  imageFilter->SetOutsideValue( 0 );

  imageFilter->Update();

  image->Graft(imageFilter->GetOutput());
}