Examples/DataRepresentation/Image/ImageAdaptor2.cxx

/*=========================================================================
 *
 *  Copyright Insight Software Consortium
 *
 *  Licensed under the Apache License, Version 2.0 (the "License");
 *  you may not use this file except in compliance with the License.
 *  You may obtain a copy of the License at
 *
 *         http://www.apache.org/licenses/LICENSE-2.0.txt
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS,
 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 *=========================================================================*/

// Software Guide : BeginLatex
//
// This example illustrates how to use the \doxygen{ImageAdaptor}
// to access the individual components of an RGB image. In this case, we
// create an ImageAdaptor that will accept a RGB image as input and
// presents it as a scalar image. The pixel data
// will be taken directly from the red channel of the original image.
//
// \index{itk::ImageAdaptor!Instantiation}
// \index{itk::ImageAdaptor!Header}
//
// Software Guide : EndLatex

#include "itkImageAdaptor.h"
#include "itkImageRegionIteratorWithIndex.h"
#include "itkImageFileReader.h"
#include "itkImageFileWriter.h"
#include "itkRescaleIntensityImageFilter.h"


//  Software Guide : BeginLatex
//
//  As with the previous example, the bulk of the effort in creating the image
//  adaptor is associated with the definition of the pixel accessor class. In
//  this case, the accessor converts a RGB vector to a scalar containing the
//  red channel component. Note that in the following, we do not need to define
//  the \code{Set()} method since we only expect the adaptor to be used for
//  reading data from the image.
//
//  Software Guide : EndLatex


// Software Guide : BeginCodeSnippet
class RedChannelPixelAccessor
{
public:
  typedef itk::RGBPixel<float>   InternalType;
  typedef               float    ExternalType;

  static ExternalType Get( const InternalType & input )
    {
    return static_cast<ExternalType>( input.GetRed() );
    }
};
// Software Guide : EndCodeSnippet


//  Software Guide : BeginLatex
//
//  The \code{Get()} method simply calls the \code{GetRed()} method
//  defined in the \doxygen{RGBPixel} class.
//
//  Software Guide : EndLatex


//-------------------------
//
//   Main code
//
//-------------------------

int main( int argc, char *argv[] )
{
  if( argc < 3 )
    {
    std::cerr << "Usage: " << std::endl;
    std::cerr << "ImageAdaptor2   inputRGBFileName outputRedChannelFileName" << std::endl;
    return EXIT_FAILURE;
    }


  //  Software Guide : BeginLatex
  //
  //  Now we use the internal pixel type of the pixel accessor to define the
  //  input image type, and then proceed to instantiate the ImageAdaptor type.
  //
  //  \index{PixelAccessor!RGB red channel}
  //  \index{itk::ImageAdaptor!RGB red channel}
  //  \index{ImageAdaptor!RGB red channel}
  //
  //  Software Guide : EndLatex


  // Software Guide : BeginCodeSnippet
  typedef RedChannelPixelAccessor::InternalType  InputPixelType;
  const   unsigned int   Dimension = 2;
  typedef itk::Image< InputPixelType, Dimension >   ImageType;

  typedef itk::ImageAdaptor<  ImageType,
                              RedChannelPixelAccessor > ImageAdaptorType;

  ImageAdaptorType::Pointer adaptor = ImageAdaptorType::New();
  // Software Guide : EndCodeSnippet


  //  Software Guide : BeginLatex
  //
  //  We create an image reader and connect the output to the adaptor
  //  as before.
  //
  //  Software Guide : EndLatex


  // Software Guide : BeginCodeSnippet
  typedef itk::ImageFileReader< ImageType >   ReaderType;
  ReaderType::Pointer reader = ReaderType::New();
  // Software Guide : EndCodeSnippet

  reader->SetFileName( argv[1] );
  reader->Update();

  // Software Guide : BeginCodeSnippet
  adaptor->SetImage( reader->GetOutput() );
  // Software Guide : EndCodeSnippet


  //  Software Guide : BeginLatex
  //
  //  We create an \doxygen{RescaleIntensityImageFilter} and an
  //  \doxygen{ImageFileWriter} to rescale the dynamic range of the pixel values
  //  and send the extracted channel to an image file. Note that the image type
  //  used for the rescaling filter is the \code{ImageAdaptorType} itself. That
  //  is, the adaptor type is used in the same context as an image type.
  //
  //  Software Guide : EndLatex


  // Software Guide : BeginCodeSnippet
  typedef itk::Image< unsigned char, Dimension >   OutputImageType;
  typedef itk::RescaleIntensityImageFilter< ImageAdaptorType,
                                            OutputImageType
                                               >   RescalerType;

  RescalerType::Pointer rescaler = RescalerType::New();
  typedef itk::ImageFileWriter< OutputImageType >   WriterType;
  WriterType::Pointer writer = WriterType::New();
  // Software Guide : EndCodeSnippet


  writer->SetFileName( argv[2] );


  //  Software Guide : BeginLatex
  //
  //  Now we connect the adaptor as the input to the rescaler and set the
  //  parameters for the intensity rescaling.
  //
  //  Software Guide : EndLatex

  // Software Guide : BeginCodeSnippet
  rescaler->SetOutputMinimum(  0  );
  rescaler->SetOutputMaximum( 255 );

  rescaler->SetInput( adaptor );
  writer->SetInput( rescaler->GetOutput() );
  // Software Guide : EndCodeSnippet


  //  Software Guide : BeginLatex
  //
  //  Finally, we invoke the \code{Update()} method on the writer and take
  //  precautions to catch any exception that may be thrown during
  //  the execution of the pipeline.
  //
  //  Software Guide : EndLatex

  // Software Guide : BeginCodeSnippet
  try
    {
    writer->Update();
    }
  catch( itk::ExceptionObject & excp )
    {
    std::cerr << "Exception caught " << excp << std::endl;
    return EXIT_FAILURE;
    }
  // Software Guide : EndCodeSnippet


  //  Software Guide : BeginLatex
  //
  //  ImageAdaptors for the green and blue channels can easily be implemented by
  //  modifying the pixel accessor of the red channel and then using the
  //  new pixel accessor for instantiating the type of an image adaptor.
  //  The following define a green channel pixel accessor.
  //
  //  \index{PixelAccessor!RGB green channel}
  //  \index{itk::ImageAdaptor!RGB green channel}
  //  \index{ImageAdaptor!RGB green channel}
  //
  //  Software Guide : EndLatex


  // Software Guide : BeginCodeSnippet
  class GreenChannelPixelAccessor
  {
  public:
    typedef itk::RGBPixel<float>   InternalType;
    typedef               float    ExternalType;

    static ExternalType Get( const InternalType & input )
      {
      return static_cast<ExternalType>( input.GetGreen() );
      }
    };
  // Software Guide : EndCodeSnippet

  //  Software Guide : BeginLatex
  //
  // A blue channel pixel accessor is similarly defined.
  //
  //  \index{PixelAccessor!RGB blue channel}
  //  \index{itk::ImageAdaptor!RGB blue channel}
  //  \index{ImageAdaptor!RGB blue channel}
  //
  //  Software Guide : EndLatex

  // Software Guide : BeginCodeSnippet
  class BlueChannelPixelAccessor
    {
  public:
    typedef itk::RGBPixel<float>   InternalType;
    typedef               float    ExternalType;

    static ExternalType Get( const InternalType & input )
      {
      return static_cast<ExternalType>( input.GetBlue() );
      }
    };
  // Software Guide : EndCodeSnippet

  //  Software Guide : BeginLatex
  //
  // \begin{figure} \center
  // \includegraphics[width=0.24\textwidth]{VisibleWomanEyeSlice}
  // \includegraphics[width=0.24\textwidth]{VisibleWomanEyeSliceRedComponent}
  // \includegraphics[width=0.24\textwidth]{VisibleWomanEyeSliceGreenComponent}
  // \includegraphics[width=0.24\textwidth]{VisibleWomanEyeSliceBlueComponent}
  // \itkcaption[Image Adaptor to RGB Image]{Using
  // ImageAdaptor to extract the components of an RGB image. The
  // image on the left is a subregion of the Visible Woman cryogenic data set.
  // The red, green and blue components are shown from left to right as scalar
  // images extracted with an ImageAdaptor.}
  // \label{fig:ImageAdaptorToRGBImage}
  // \end{figure}
  //
  //
  //  Figure~\ref{fig:ImageAdaptorToRGBImage} shows the result
  //  of extracting the red, green and blue components from a region of the
  //  Visible Woman cryogenic data set.
  //
  //  Software Guide : EndLatex

  return EXIT_SUCCESS;
}