Compiling ParaView3 for Cray supercomputers

This wiki page is currently a work in progress.

Objectives and Overview

Our goal is to run pvbatch on Cray massively parallel processor systems. Pvbatch is ParaView's MPI-enabled batch application. It reads batch scripts written in python and distributes the work across many processors. Pvbatch will be built when you compile ParaView 3. Before you can compile ParaView 3 you must compile three support packages- CMake, OSMesa, Python. The entire process will take about three hours to complete and you should have at least one gigabyte of workspace.

These instructions are intended for Cray MPP systems running the Catamount operating system. Specifically, these instructions have been tested on the Bigben XT3 supercomputer at Pittsburgh Supercomputing Center.

Terminology

These terms are probably self explanatory, but just to clarify...

• front end node - the computer/shell you log into and work on.
• native operating system - the operating system that runs on the front end node (at PSC the OS is SuSE linux)
• native build - software that executes on the front end nodes

• compute node - the computers/processors running scientific computation
• catamount - the operating system that runs on the compute nodes
• catamount build - software that has been cross compiled to execute on the compute node

Build steps

You will log into a shell on a front end node. You will download the source code and then compile CMake, OSMesa, Python, and ParaView3. Some of these packages must be compiled twice- one native version and one cross compiled version. The steps are:

1. Compile a CMake native build.
2. Compile an OSMesa native build.
3. Compile an OSMesa catamount build.
4. Compile a Python native build.
5. Compile a Python catamount build.
6. Compile a ParaView 3 native build.
7. Compile a ParaView 3 catamount build.

• Step 2 is optional if your front end system already has OSMesa installed.
• Step 4 is optional if your front end system already has Python installed.

Why are the native builds required?

During the ParaView build process helper binaries are compiled and executed to generate source files for future build targets. When you cross compile ParaView the helper binaries cannot execute since they are non-native to the front end node you are working on. The solution is to build a native version of ParaView first, and then tell CMake to use the native helper binaries while cross compiling.

Useful links

Some of these links may have restricted read permissions:

• CMake/CrayXT3
• Building Python with CMake
• Cross compiling ParaView3 and VTK

Compilers

The front end nodes have more than one compiler installed. We will use the PGI and GNU compilers. At Bigben, the PGI compiler is the default compiler when you log in. You can switch compilers like this:

## switch from PGI to GNU compiler
module switch PrgEnv-pgi PrgEnv-gnu

## switch from GNU to PGI compiler
module switch PrgEnv-gnu PrgEnv-pgi

Toolchains

When you cross compile with CMake you will input a toolchain file. You will use one toolchain file when you use the PGI compiler, and a different toolchain file when you use GNU.

For more information see the CMake/CrayXT3 page.

Directory structure

Setup your directories however you'd like. However, some of example commands given in these instructions are specific to my directory structure, so here is how I set up my directories:

~/
  install/
    bin/
    include/
    lib/

  install-catamount/
    bin/
    include/
    lib/

  toolchains/

  projects/
    cmake/
      CMake/
      build-native/

    mesa/
      mesa-native/
      mesa-catamount/

    python/
      python-for-cmake/
      build-native/
      build-catamount/

    paraview/
      ParaView3/
      build-native/
      build-catamount/

Note, some of these directories will be created automatically when you extract archives or checkout code from cvs/svn. The install directories and subdirectories are created automatically when you run "make install" commands.

Compiling CMake

CMake home page

Getting the source

You will need the latest version of CMake from CVS.

cd ~/projects/cmake
cvs -d :pserver:anonymous@www.cmake.org:/cvsroot/CMake login
## respond with password: cmake
cvs -d :pserver:anonymous@www.cmake.org:/cvsroot/CMake co CMake

Native build

It shouldn't matter which compiler you use to build CMake. I used the default PGI compiler.

General command:

cd <cmake-build-dir>
<cmake-src-dir>/bootstrap --prefix=<native-install-dir>
make
make install

Example command:

cd ~/projects/cmake/build
../CMake/bootstrap --prefix=~/projects/install
make
make install

You should now have the executable: <native-install-dir>/bin/ccmake.

Compiling OSMesa

You will download the Mesa source code and compile the OSMesa target. OSMesa (off screen mesa) allows rendering with the OpenGL API directly into main memory instead of using system display memory. The native build is only required if your native system does not have OSMesa already installed. At Bigben, OSMesa was found at /usr/lib64/libOSMesa.so with headers in /usr/include.

Mesa home page.

Getting the source

You can download the Mesa source directly using wget. In case the url changes, here is the Mesa download page

cd ~/projects/mesa
wget http://easynews.dl.sourceforge.net/sourceforge/mesa3d/MesaLib-7.0.2.tar.gz
tar -zxf MesaLib-7.0.2.tar.gz

Native build

Use the PGI compiler. Since Mesa uses an in-source build you might want to copy the source dir before you start.

cd ~/projects/mesa
cp -r Mesa-7.0.2 mesa-native

## edit mesa-native/configs/default
##
## replace line:   INSTALL_DIR = /usr/local
## with:           INSTALL_DIR = ~/install
## or:             INSTALL_DIR = <native-install-dir>

cd mesa-native
make linux-osmesa
make install

Catamount build

Use the PGI compiler. Since Mesa uses an in-source build you might want to copy the source dir before you start.

cd ~/projects/mesa
cp -r Mesa-7.0.2 mesa-catamount

## edit mesa-catamount/configs/default
##
## replace line:   INSTALL_DIR = /usr/local
## with:           INSTALL_DIR = ~/install-catamount
## or:             INSTALL_DIR = <catamount-install-dir>

cd mesa-catamount
make catamount-osmesa-pgi
make install

Compiling Python

CMake files for building Python can be checked out from the ParaView repository. The native python build is only required if your system doesn't already have python libraries and binaries installed. On Bigben, python was located at /usr/lib64/libpython2.3.so and /usr/bin/python2.3.

Getting the source

These instructions use Python from the subversion repository. It is possible to use Python release 2.5.1 and apply a patch, more details are here.

cd ~/projects/python
svn co http://svn.python.org/projects/python/trunk python-with-cmake

cvs -d :pserver:anoncvs@www.paraview.org:/cvsroot/ParaView3 login
## respond with empty password
cvs -d :pserver:anoncvs@www.paraview.org:/cvsroot/ParaView3 co -d python-with-cmake ParaView3/Utilities/CMakeBuildForPython

Native build

Use the GNU compiler.

Example command:

cd ~/projects/python
mkdir build-native
~/install/bin/ccmake ../python-with-cmake -DCMAKE_INSTALL_PREFIX=~/install

## configure with ccmake

make
make install

General command:

cd <python-build-native-dir>
<native-install-dir>/bin/ccmake <python-source-dir> -DCMAKE_INSTALL_PREFIX=<native-install-dir>

## configure with ccmake

make
make install

Catamount build

Use the GNU compiler. When configuring with CMake:

• Confirm all MODULE__*_SHARED options are off
• Turn off MODULE__pwd_ENABLE
• Turn off ENABLE_IPV6
• Turn off WITH_THREAD

General command:

cd <python-build-catamount-dir>
<native-install-dir>/bin/ccmake -DCMAKE_TOOLCHAIN_FILE=~<toolchain-dir>/Toolchain-Catamount-gcc.cmake -DCMAKE_INSTALL_PREFIX=<catamount-install-dir> -C <python-source-dir>/CMake/TryRunResults-Python-catamount-gcc.cmake <python-source-dir>

## configure with ccmake

make
make install

Example command:

cd ~/projects/python
mkdir build-catamount

~/install/bin/ccmake -DCMAKE_TOOLCHAIN_FILE=~/toolchains/Toolchain-Catamount-gcc.cmake -DCMAKE_INSTALL_PREFIX=~/install-catamount -C ../python-with-cmake/CMake/TryRunResults-Python-catamount-gcc.cmake ../python-with-cmake/

## configure with ccmake

make
make install