|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
File Name
(FileName)'
This property specifies the file name for the Exodus reader
|
|
|
|
Use Meta File
(UseMetaFile)'
This hidden property must always be set to 1 for this proxy to work
|
Only the values 0 and 1 are accepted
|
|
Animate Vibrations
(AnimateVibrations)'
If this flag is on and HasModeShapes is also on, then this reade
will report a continuous time range [0,1] and animate th
displacements in a periodic sinusoid. If this flag is off an
HasModeShapes is on, this reader ignores time. This flag has n
effect if HasModeShapes is off
|
Only the values 0 and 1 are accepted
|
|
Apply Displacements
(ApplyDisplacements)'
Geometric locations can include displacements. When this option is on, the nodal positions are 'displaced' by the standard exodus displacement vector. If displacements are turned 'off', the user can explicitly add them by applying a warp filter
|
Only the values 0 and 1 are accepted
|
|
Displacement Magnitude
(DisplacementMagnitude)'
When displacements are being applied, they are scaled by this amount. Set to 1 for no scaling
|
|
|
|
Edge Blocks
(EdgeBlocks)'
|
|
The list of array names is provided by the reader
|
|
Edge Map Array Status
(EdgeMapArrayStatus)'
|
|
The list of array names is provided by the reader
|
|
Edge Set Array Status
(EdgeSetArrayStatus)'
|
|
The list of array names is provided by the reader
|
|
Edge Set Result Array Status
(EdgeSetResultArrayStatus)'
|
|
The list of array names is provided by the reader
|
|
Edge Variables
(EdgeVariables)'
|
|
The list of array names is provided by the reader
|
|
Element Blocks
(ElementBlocks)'
|
|
|
|
|
Element Map Array Status
(ElementMapArrayStatus)'
|
|
The list of array names is provided by the reader
|
|
Element Set Array Status
(ElementSetArrayStatus)'
|
|
The list of array names is provided by the reader
|
|
Element Set Result Array Status
(ElementSetResultArrayStatus)'
|
|
The list of array names is provided by the reader
|
|
Element Variables
(ElementVariables)'
|
|
The list of array names is provided by the reader
|
|
Exodus Model Metadata
(ExodusModelMetadata)'
|
|
Only the values 0 and 1 are accepted
|
|
Face Blocks
(FaceBlocks)'
|
|
The list of array names is provided by the reader
|
|
Face Map Array Status
(FaceMapArrayStatus)'
|
|
The list of array names is provided by the reader
|
|
Face Set Array Status
(FaceSetArrayStatus)'
|
|
The list of array names is provided by the reader
|
|
Face Set Result Array Status
(FaceSetResultArrayStatus)'
|
|
The list of array names is provided by the reader
|
|
Face Variables
(FaceVariables)'
|
|
The list of array names is provided by the reader
|
|
File Pattern
(FilePattern)'
This property contains a text string specifying the pattern used to load files. There are two parts to it: the prefix (%s) and the file number (%i). The format used is the same as that used for printf
|
|
|
|
File Prefix
(FilePrefix)'
This property specifies the file root used with the file pattern to format a file name. (See the File Pattern property.
|
|
|
|
File Range
(FileRange)'
This property controls the indices of the first and last files to be read
|
-1 -
|
|
|
Generate Global Element Id Array
(GenerateGlobalElementIdArray)'
|
|
Only the values 0 and 1 are accepted
|
|
Generate Global Node Id Array
(GenerateGlobalNodeIdArray)'
|
|
Only the values 0 and 1 are accepted
|
|
Generate Object Id Cell Array
(GenerateObjectIdCellArray)'
|
|
Only the values 0 and 1 are accepted
|
|
Global Variables
(GlobalVariables)'
|
|
The list of array names is provided by the reader
|
|
Has Mode Shapes
(HasModeShapes)'
Some simulations overload the Exodus time steps to represent mod
shapes. In this case, it does not make sense to iterate over th
"time steps", because they are not meant to be played in order
Rather, each represents the vibration at a different "mode.
Setting the value of this property to 1 changes the semantics of the reader to no
report the time steps to downstream filters
|
Only the values 0 and 1 are accepted
|
|
Mode Shape
(ModeShape)'
Specify the current mode shape when HasModeShapes in on
|
|
|
|
Node Map Array Status
(NodeMapArrayStatus)'
|
|
The list of array names is provided by the reader
|
|
Node Set Array Status
(NodeSetArrayStatus)'
|
|
The list of array names is provided by the reader
|
|
Node Set Result Array Status
(NodeSetResultArrayStatus)'
|
|
The list of array names is provided by the reader
|
|
Point Variables
(PointVariables)'
|
|
The list of array names is provided by the reader
|
|
Side Set Array Status
(SideSetArrayStatus)'
|
|
The list of array names is provided by the reader
|
|
Side Set Result Array Status
(SideSetResultArrayStatus)'
|
|
The list of array names is provided by the reader
|
|
XML File Name
(XMLFileName)'
This property specifies the name of an XML file containing part and material descriptions and a mapping to element blocks
|
|
|
=FLUENTReader
Reads a dataset in Fluent file format
FLUENTReader creates an unstructured grid dataset. It reads .cas and<br
.dat files stored in FLUENT native format.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
Cell Arrays
(CellArrayStatus)'
Select which cell-centered arrays to read
|
The list of array names is provided by the reader
|
|
File Name
(FileName)'
Set the file name for the FLUENT reader
|
|
|
=Flash Reader
Read multi-block dataset from a Flash file
This Flash reader loads data stored in Flash format. The output of this reader is a multi-block dataset.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
Block Output Type
(BlockOutputType)'
The property indicates the output type of each block, either vtkImageData (by default) or vtkRectilinearGrid
|
The value must be one of the following: Image Data (0), Rectilinear Grid (1)
|
|
File Name
(FileName)'
This property specifies the file name for the Flash reader
|
|
|
|
Load Morton Curve
(LoadMortonCurve)'
Generate morton curve when on
|
Only the values 0 and 1 are accepted
|
|
Load Particles
(LoadParticles)'
Load particles when on
|
Only the values 0 and 1 are accepted
|
=Gaussian Cube Reader
Produce polygonal data by reading a Gaussian Cube file
The Gaussian Cube reader produces polygonal data by reading data files produced by the Gaussian software package. The expected file extension is .cube.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
B Scale
(BScale)'
A scaling factor to compute bonds between non-hydrogen atom
|
|
|
|
File Name
(FileName)'
This property specifies the file name for the Gaussian Cube reader
|
|
|
|
H BScale
(HBScale)'
A scaling factor to compute bonds with hydrogen atoms
|
|
|
=Image Reader
Read raw regular rectilinear grid data from a file. The dimensions and type of the data must be specified
The Image reader reads raw regular rectilinear grid (image/volume) data from a file. Because no metadata is provided, the user must specify information about the size, spacing, dimensionality, etc. about the dataset.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
Data Byte Order
(DataByteOrder)'
This property indicates the byte order of the binary file(s)
|
The value must be one of the following: BigEndian (0), LittleEndian (1)
|
|
Data Extent
(DataExtent)'
This property specifies the minimum and maximum index values of the data in each dimension (xmin, xmax, ymin, ymax, zmin, zmax)
|
0 0 0 0 0
|
|
|
Data Origin
(DataOrigin)'
The coordinate contained in this property specifies the position of the point with index (0,0,0)
|
0 0
|
|
|
Data Scalar Type
(DataScalarType)'
The value of this property indicates the scalar type of the pixels/voxels in the file(s): short, int, float ..
|
The value must be one of the following: char (2), unsigned char (3), short (4), unsigned short (5), int (6), unsigned int (7), long (8), unsigned long (9), float (10), double (11)
|
|
Data Spacing
(DataSpacing)'
This property specifies the size of a voxel in each dimension
|
1 1
|
|
|
File Dimensionality
(FileDimensionality)'
This property indicates whether the file(s) in this dataset contain slices (2D) or volumes (3D)
|
The value must be one of the following: 2 (2), 3 (3)
|
|
File Lower Left
(FileLowerLeft)'
This property determines whether the data originates in the lower left corner (on) or the upper left corner (off). Most scientific data is written with a right-handed axes that originates in the lower left corner. However, several 2D image file formats write the image from the upper left corner
|
Only the values 0 and 1 are accepted
|
|
File Pattern
(FilePattern)'
The text string contained in the property specifies the format string to determine the file names necessary for reading this dataset. In creating the filenames, %s will be replaced by the prefix and %d by a digit which represents the slice number in Z. The format string is the same as that used by printf
|
%
|
|
|
File Prefix
(FilePrefix)'
The text string contained in this property specifies the file prefix (directory plus common initial part of file name) for the raw binary uniform rectilinear grid dataset
|
|
|
|
Number Of Scalar Components
(NumberOfScalarComponents)'
This property specifies the number of componenets the scalar value at each pixel or voxel has (e.g., RGB - 3 scalar components)
|
|
|
|
Scalar Array Name
(ScalarArrayName)'
This property contains a text string listing a name to assign to the point-centered data array read
|
ImageFil
|
|
=LSDynaReader
Read LS-Dyna databases (d3plot)
This reader reads LS-Dyna databases.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
Beam Arrays
(BeamArrayStatus)'
Select which beam arrays to read
|
The list of array names is provided by the reader
|
|
Deformed Mesh
(DeformedMesh)'
Should the mesh be deformed over time (if the Deflection node array is set to load)
|
Only the values 0 and 1 are accepted
|
|
File Name
(FileName)'
Set the file name for the LSDyna reader
|
|
|
|
Part Arrays
(PartArrayStatus)'
Select which part arrays to read
|
The list of array names is provided by the reader
|
|
Particle Arrays
(ParticleArrayStatus)'
Select which particle arrays to read
|
The list of array names is provided by the reader
|
|
Point Arrays
(PointArrayStatus)'
Select which point-centered arrays to read
|
The list of array names is provided by the reader
|
|
Remove Deleted Cells
(RemoveDeletedCells)'
Should cells that have been deleted (failed structurally, for example) be removed from the mesh
|
Only the values 0 and 1 are accepted
|
|
Rigid Body Arrays
(RigidBodyArrayStatus)'
Select which rigid body arrays to load
|
The list of array names is provided by the reader
|
|
Road Surface Arrays
(RoadSurfaceArrayStatus)'
Select which road surface arrays to read
|
The list of array names is provided by the reader
|
|
Shell Arrays
(ShellArrayStatus)'
Select which shell arrays to read
|
The list of array names is provided by the reader
|
|
Solid Arrays
(SolidArrayStatus)'
Select which solid arrays to read
|
The list of array names is provided by the reader
|
|
Split by Material Id
(SplitByMaterialId)'
Should each material have its own mesh, or should there be one mesh for all materials
|
Only the values 0 and 1 are accepted
|
|
Thick Shell Arrays
(ThickShellArrayStatus)'
Select which thick shell arrays to read
|
The list of array names is provided by the reader
|
=Legacy VTK Reader
Read files stored in VTK's legacy file format
The Legacy VTK reader loads files stored in VTK's legacy file format (before VTK 4.2, although still supported). The expected file extension is .vtk. The type of the dataset may be structured grid, uniform rectilinear grid (image/volume), non-uniform rectiinear grid, unstructured grid, or polygonal. This reader also supports file series.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
File Names
(FileNames)'
The list of files to be read by the reader. If more than 1 file is specified, the reader will switch to file series mode in which it will pretend that it can support time and provide 1 file per time step
|
|
|
=MFIXReader
Reads a dataset in MFIX file format
vtkMFIXReader creates an unstructured grid dataset. It reads a restart<br
file and a set of sp files. The restart file contains the mesh <br
information. MFIX meshes are either cylindrical or rectilinear, but <br
this reader will convert them to an unstructured grid. The sp files <br
contain transient data for the cells. Each sp file has one or more <br
variables stored inside it.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
Cell Arrays
(CellArrayStatus)'
Select which cell-centered arrays to read
|
The list of array names is provided by the reader
|
|
File Name
(FileName)'
Set the file name for the MFIX reader
|
|
|
=Meta Image reader
Read binary UNC meta image data
The Meta Image Reader reads binary UNC meta image data, and produces uniform rectilinear (image/volume) data. The default file extensions are .mhd and .mha.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
File Name
(FileName)'
This property specifies the file name for the Meta Image reader
|
|
|
=NetCDF MPAS reader
Read unstructured grid data from a file
The Image reader reads unstructured grid from a file. Grid is dual grid.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
Cell Array Status
(CellArrayStatus)'
This property lists which netCDF dual-grid cell variables to load
|
The list of array names is provided by the reader
|
|
File Name
(FileName)'
This property specifies the file name to read
|
|
|
|
Point Array Status
(PointArrayStatus)'
This property lists which netCDF dual-grid point variables to load
|
The list of array names is provided by the reader
|
|
Vertical Level
(VerticalLevel)'
|
|
|
|
=NetCDF POP reader
Read raw regular rectilinear grid data from a file. The dimensions and type of the data must be specified
The Image reader reads raw regular rectilinear grid (image/volume) data from a file. Because no metadata is provided, the user must specify information about the size, spacing, dimensionality, etc. about the dataset.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
File Name
(FileName)'
This property specifies the file name to read
|
|
|
|
Stride
(Stride)'
This property indicate the number of indices per dimension (i,j,k) to skip between each point include
in this output
|
1 1
The value must be greater than or equal to (1, 1, 1)
|
|
Variables
(VariableArrayStatus)'
This property lists which netCDF variables to load
|
The list of array names is provided by the reader
|
=NetCDF Reader
Read regular arrays from netCDF files. Will also read any topological information specified by the COARDS and CF conventions
Reads arrays from netCDF files into structured VTK data sets. In<br
the absence of any other information, the files will be read as<br
image data. This reader will also look for meta information<br
specified by the CF convention that specify things like topology<br
and time. This information can cause the output to be a nonuniform<br
rectilinear grid or curvilinear (structured) grid. Details on the<br
CF convention can be found at http://cf-pcmdi.llnl.gov/. It should<br
be noted that the CF convention is a superset of the COARDS<br
convention, so COARDS conventions will also be recognized.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
File Name
(FileName)'
The name of the files to load
|
|
|
|
Dimensions
(Dimensions)'
Load the grid with the given dimensions. Any arrays that confor
to these dimensions will be loaded
|
|
|
Replace Fill Value With Nan
(ReplaceFillValueWithNan)'
If on, any float or double variable read that has a _FillValu
attribute will have that fill value replaced with a not-a-numbe
(NaN) value. The advantage of setting these to NaN values i
that, if implemented properly by the system and careful mat
operations are used, they can implicitly be ignored b
calculations like finding the range of the values. That said
this option should be used with caution as VTK does not full
support NaN values and therefore odd calculations may occur
|
Only the values 0 and 1 are accepted
|
|
Spherical Coordinates
(SphericalCoordinates)'
If on, then data with latitude/longitude dimensions will b
read in as curvilinear data shaped like spherical coordinates
If false, then the data will always be read in Cartesia
coordinates
|
Only the values 0 and 1 are accepted
|
|
Vertical Bias
(VerticalBias)'
The bias of the vertical component of spherical coordinates. I
is common to write the vertical component with respect t
something other than the center of the sphere (for example, th
surface). In this case, it might be necessary to scale and/o
bias the vertical height. The height will become height*scale
bias. Keep in mind that if the positive attribute of th
vertical dimension is down, then the height is negated. Th
scaling will be adjusted if it results in invalid (negative
vertical values
|
|
|
|
Vertical Scale
(VerticalScale)'
The scale of the vertical component of spherical coordinates. I
is common to write the vertical component with respect t
something other than the center of the sphere (for example, th
surface). In this case, it might be necessary to scale and/o
bias the vertical height. The height will become height*scale
bias. Keep in mind that if the positive attribute of th
vertical dimension is down, then the height is negated. Th
scaling will be adjusted if it results in invalid (negative
vertical values
|
|
|
=Nrrd Reader
Read raw image files with Nrrd meta data
The Nrrd reader reads raw image data much like the Raw Image Reader<br
except that it will also read metadata information in the Nrrd format.<br
This means that the reader will automatically set information like file<br
dimensions.
<br
There are several limitations on what type of nrrd files we can<br
read. This reader only supports nrrd files in raw format. Other<br
encodings like ascii and hex will result in errors. When reading in<br
detached headers, this only supports reading one file that is<br
detached.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
Data VOI
(DataVOI)'
The data volume of interest (VOI). The VOI is a sub-extent of th
data that you want loaded. Setting a VOI is useful when readin
from a large data set and you are only interested in a smal
portion of the data. If left containing all 0's, then the reade
will load in the entire data set
|
0 0 0 0 0
|
|
|
File Name
(FileName)'
The name of the file to read (or the meta data file that wil
point to the actual file)
|
|
|
=OpenFOAMReader
Sorry, no help is currently available
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
Add dimensional units to array names
(AddDimensionsToArrayNames)'
Read dimensional units from field data and add them to array names as human-readable string
|
Only the values 0 and 1 are accepted
|
|
Cache mesh
(CacheMesh)'
Cache the OpenFOAM mesh between GUI selection changes
|
Only the values 0 and 1 are accepted
|
|
Case Type
(CaseType)'
The property indicates whether decomposed mesh or reconstructed mesh should be rea
|
The value must be one of the following: Decomposed Case (0), Reconstructed Case (1)
|
|
Cell Arrays
(CellArrays)'
|
|
The list of array names is provided by the reader
|
|
Create cell-to-point filtered data
(CreateCellToPoint)'
Create point data from cell data. Beware: the filter does not do inverse distance weighting
|
Only the values 0 and 1 are accepted
|
|
Decompose polyhedra
(DecomposePolyhedra)'
Decompose polyhedra into tetrahedra and pyramids
|
Only the values 0 and 1 are accepted
|
|
File Name
(FileName)'
|
|
|
|
|
Lagrangian Arrays
(LagrangianArrays)'
|
|
The list of array names is provided by the reader
|
|
List timesteps according to controlDict
(ListTimeStepsByControlDict)'
List time directories listed according to the settings in controlDict
|
Only the values 0 and 1 are accepted
|
|
Mesh Regions
(MeshRegions)'
|
|
The list of array names is provided by the reader
|
|
Point Arrays
(PointArrays)'
|
|
The list of array names is provided by the reader
|
|
Lagrangian positions are in OF 1.3 binary format
(PositionsIsIn13Format)'
Set if Lagrangian positions files are in OpenFOAM 1.3 binary format
|
Only the values 0 and 1 are accepted
|
|
Read zones
(ReadZones)'
Read point/face/cell-Zones
|
Only the values 0 and 1 are accepted
|
=PDB Reader
Read PDB molecule files
The PDB reader reads files in the format used by the Protein Data Bank (an archive of experimentally determined three-dimensional structures of biological macromolecules). The expected file extension is .pdb. The output datasets are polygonal.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
File Name
(FileName)'
This property specifies the file name for the PDB reader
|
|
|
=PLOT3D Reader
Read ASCII or binary PLOT3D files
PLOT3D is a plotting package developed at NASA. The PLOT3D reader can read both ASCII and binary PLOT3D files. The default file extension for the geometry files is .xyz, and the default file extension for the solution files is .q. The output of this reader is a multi-block dataset containing curvilinear (structured grid) datasets.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
Q File Name
(QFileName)'
The list of .q (solution) files for the PLOT3D reader. This can b
more than 1. If more that 1 file is specified, the reader will switc
to file-series mode in which it will pretend that it can support tim
and provide 1 file per time step
|
|
|
|
Binary File
(BinaryFile)'
This property indicates whether the data files are binary
|
Only the values 0 and 1 are accepted
|
|
Byte Order
(ByteOrder)'
This property specifies the byte order of any binary file(s)
|
The value must be one of the following: BigEndian (0), LittleEndian (1)
|
|
File Name
(FileName)'
This property specifies the .xyz (geometry) file name for the PLOT3D reader
|
|
|
|
Force Read
(ForceRead)'
This property indicates whether to attempt to read the file even if it appears corrup
|
Only the values 0 and 1 are accepted
|
|
Functions
(Functions)'
This property lists which functions (point-centered arrays) to compute
|
The value must be one of the following: Scalar - Pressure (110), Scalar - Temperature (120), Scalar - Enthalpy (130), Scalar - Internal energy (140), Scalar - Kinetic energy (144), Scalar - Velocity magnitude (153), Scalar - Entropy (170), Scalar - Swirl. (184), Vector - Velocity (200), Vector - Vorticity (201), Vector - Pressure gradient (210)
|
|
Has Byte Count
(HasByteCount)'
This property indicates whether this file uses Fortran leading-trailing byte counts
|
Only the values 0 and 1 are accepted
|
|
I Blanking
(IBlanking)'
This property indicates whether this dataset has visibility information
|
Only the values 0 and 1 are accepted
|
|
Multi Grid
(MultiGrid)'
This property indicates whether these files have multiple-block information
|
Only the values 0 and 1 are accepted
|
|
Two Dimensional Geometry
(TwoDimensionalGeometry)'
This property indicates whether the data is two- or three-dimensional
|
Only the values 0 and 1 are accepted
|
=PLY Reader
Read files stored in Stanford University's PLY polygonal file format
The PLY reader reads files stored in the PLY polygonal file format developed at Stanford University. The PLY files that ParaView can read must have the elements "vertex" and "face" defined. The "vertex" elements must have the propertys "x", "y", and "z". The "face" elements must have the property "vertex_indices" defined. The default file extension for this reader is .ply.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
File Name
(FileName)'
This property specifies the file name for the PLY reader
|
|
|
=POP Reader
Read data files from the Parallel Ocean Program (POP)
The POP reader reads data files from the Parallel Ocean Program (POP). The expected file extension is .pop. The output of this reader is a structured grid dataset. <br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
Clip Extent
(ClipExtent)'
This property indicates the minimum and maximum extent in each dimension of the dataset (X, Y, and Z) to read
|
-2147483647 2147483647 -2147483647 2147483647 -2147483647 214748364
|
|
|
File Name
(FileName)'
This property specifies the file name for the POP Ocean file reader
|
|
|
|
Number Of Ghost Levels
(NumberOfGhostLevels)'
This property indicates the number of ghost levels to generate
|
|
|
|
Radius
(Radius)'
This property specifies the radius of the dataset
|
6000
|
|
=PVD Reader
Load a dataset stored in ParaView's PVD file format
The PVD reader reads data stored in ParaView's PVD file format. The .pvd file is essentially a header file that collects together other data files stored in VTK's XML-based file format.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
File Name
(FileName)'
This property specifies the file name for the PVD reader
|
|
|
=Particles Reader
Read particle data
vtkParticleReader reads either a binary or a text file of particles.<br
Each particle can have associated with it an optional scalar value. So<br
the format is: x, y, z, scalar (all floats or doubles). The text file<br
can consist of a comma delimited set of values. In most cases<br
vtkParticleReader can automatically determine whether the file is text<br
or binary. The data can be either float or double. Progress updates<br
are provided. With respect to binary files, random access into the file<br
to read pieces is supported.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
File Name
(FileName)'
The list of files to be read by the reader
|
|
|
|
Byte Order
(ByteOrder)'
Set/Get the byte ordering of the file you are trying to read in
|
The value must be one of the following: BigEndian (0), LittleEndian (1)
|
|
Data Type
(DataType)'
Get/Set the data type. The options are
- Float (10) (default) single precision floating point
- Double (11) double precision floating point
|
1
The value must be one of the following: Float (10), Double (11)
|
|
File Type
(FileType)'
Set the file type. The options are
- Unknown (0) (default) the reader will attempt to determine the fil
type. If this fails then you should set the file type yourself
- Text (1) the file type is text
- Binary (2) the file type is binary
|
The value must be one of the following: Unknown (0), Text (1), Binary (2)
|
|
Has Scalar
(HasScalar)'
Default: 1. If 1 then each particle has a value associated with it
|
Only the values 0 and 1 are accepted
|
=Partitioned Legacy VTK Reader
Read files stored in VTK partitioned legacy format
The Partitioned Legacy VTK reader loads files stored in VTK's partitioned legac file format (before VTK 4.2, although still supported). The expected file extension is .pvtk. The type of the dataset may be structured grid, uniform rectilinear grid (image/volume), non-uniform rectilinear grid, unstructured grid, or polygonal.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
File Name
(FileName)'
This property specifies the file name for the Partitioned Legacy VTK reader
|
|
|
=Phasta Reader
Read the parallel Phasta meta-file and the underlying Phasta files
This Phasta reader reads files stored in the Phasta (a CFD package) format. The expected file extension is .pht. The output of this reader is a multipiece data set.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
File Name
(FileName)'
This property specifies the file name for the Phasta reader
|
|
|
=Restarted Sim Exodus Reader
Read collections of Exodus output files from simulations that were restarted
When a simulation that outputs exodus files is restarted, typically you get a new set of output files. When you read them in your visualization, you often want to string these file sets together as if it was one continuous dump of files. This reader allows you to specify a metadata file that will implicitly string the files together.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
File Name
(FileName)'
This points to a special metadata file that lists the output files for each restart
|
|
|
|
Use Meta File
(UseMetaFile)'
This hidden property must always be set to 1 for this proxy to work
|
Only the values 0 and 1 are accepted
|
|
Animate Vibrations
(AnimateVibrations)'
If this flag is on and HasModeShapes is also on, then this reade
will report a continuous time range [0,1] and animate th
displacements in a periodic sinusoid. If this flag is off an
HasModeShapes is on, this reader ignores time. This flag has n
effect if HasModeShapes is off
|
Only the values 0 and 1 are accepted
|
|
Apply Displacements
(ApplyDisplacements)'
Geometric locations can include displacements. When this option is on, the nodal positions are 'displaced' by the standard exodus displacement vector. If displacements are turned 'off', the user can explicitly add them by applying a warp filter
|
Only the values 0 and 1 are accepted
|
|
Displacement Magnitude
(DisplacementMagnitude)'
When displacements are being applied, they are scaled by this amount. Set to 1 for no scaling
|
|
|
|
Edge Blocks
(EdgeBlocks)'
|
|
The list of array names is provided by the reader
|
|
Edge Map Array Status
(EdgeMapArrayStatus)'
|
|
The list of array names is provided by the reader
|
|
Edge Set Array Status
(EdgeSetArrayStatus)'
|
|
The list of array names is provided by the reader
|
|
Edge Set Result Array Status
(EdgeSetResultArrayStatus)'
|
|
The list of array names is provided by the reader
|
|
Edge Variables
(EdgeVariables)'
|
|
The list of array names is provided by the reader
|
|
Element Blocks
(ElementBlocks)'
|
|
|
|
|
Element Map Array Status
(ElementMapArrayStatus)'
|
|
The list of array names is provided by the reader
|
|
Element Set Array Status
(ElementSetArrayStatus)'
|
|
The list of array names is provided by the reader
|
|
Element Set Result Array Status
(ElementSetResultArrayStatus)'
|
|
The list of array names is provided by the reader
|
|
Element Variables
(ElementVariables)'
|
|
The list of array names is provided by the reader
|
|
Exodus Model Metadata
(ExodusModelMetadata)'
|
|
Only the values 0 and 1 are accepted
|
|
Face Blocks
(FaceBlocks)'
|
|
The list of array names is provided by the reader
|
|
Face Map Array Status
(FaceMapArrayStatus)'
|
|
The list of array names is provided by the reader
|
|
Face Set Array Status
(FaceSetArrayStatus)'
|
|
The list of array names is provided by the reader
|
|
Face Set Result Array Status
(FaceSetResultArrayStatus)'
|
|
The list of array names is provided by the reader
|
|
Face Variables
(FaceVariables)'
|
|
The list of array names is provided by the reader
|
|
Generate Global Element Id Array
(GenerateGlobalElementIdArray)'
|
|
Only the values 0 and 1 are accepted
|
|
Generate Global Node Id Array
(GenerateGlobalNodeIdArray)'
|
|
Only the values 0 and 1 are accepted
|
|
Generate Object Id Cell Array
(GenerateObjectIdCellArray)'
|
|
Only the values 0 and 1 are accepted
|
|
Global Variables
(GlobalVariables)'
|
|
The list of array names is provided by the reader
|
|
Has Mode Shapes
(HasModeShapes)'
Some simulations overload the Exodus time steps to represent mod
shapes. In this case, it does not make sense to iterate over th
"time steps", because they are not meant to be played in order
Rather, each represents the vibration at a different "mode.
Setting the value of this property to 1 changes the semantics of the reader to no
report the time steps to downstream filters
|
Only the values 0 and 1 are accepted
|
|
Mode Shape
(ModeShape)'
Specify the current mode shape when HasModeShapes in on
|
|
|
|
Node Map Array Status
(NodeMapArrayStatus)'
|
|
The list of array names is provided by the reader
|
|
Node Set Array Status
(NodeSetArrayStatus)'
|
|
The list of array names is provided by the reader
|
|
Node Set Result Array Status
(NodeSetResultArrayStatus)'
|
|
The list of array names is provided by the reader
|
|
Point Variables
(PointVariables)'
|
|
The list of array names is provided by the reader
|
|
Side Set Array Status
(SideSetArrayStatus)'
|
|
The list of array names is provided by the reader
|
|
Side Set Result Array Status
(SideSetResultArrayStatus)'
|
|
The list of array names is provided by the reader
|
|
XML File Name
(XMLFileName)'
This property specifies the name of an XML file containing part and material descriptions and a mapping to element blocks
|
|
|
=Restarted Sim Spy Plot Reader
Read collections of SPCTH files from simulations that were restarted
When a CTH simulation is restarted, typically you get a new set of output files. When you read them in your visualization, you often want to string these file sets together as if it was one continuous dump of files. This reader allows you to specify a metadata file that will implicitly string the files together.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
File Name
(FileName)'
This points to a special metadata file that lists the output files for each restart
|
|
|
|
Use Meta File
(UseMetaFile)'
This hidden property must always be set to 1 for this proxy to work
|
Only the values 0 and 1 are accepted
|
|
Cell Arrays
(CellArrayStatus)'
This property lists which cell-centered arrays to read
|
The list of array names is provided by the reader
|
|
Distribute Files
(DistributeFiles)'
In parallel mode, if this property is set to 1, the reader will distribute files or blocks
|
Only the values 0 and 1 are accepted
|
|
Down Convert Volume Fraction
(DownConvertVolumeFraction)'
If this property is set to 0, the type of the volume fraction is float; is set to 1, the type is unsigned char
|
Only the values 0 and 1 are accepted
|
|
Generate Active Block Array
(GenerateActiveBlockArray)'
If this property is set to 1, a cell array will be generated that stores the active status of a block
|
Only the values 0 and 1 are accepted
|
|
Generate Block Id Array
(GenerateBlockIdArray)'
If this property is set to 1, a cell array will be generated that stores a unique blockId for each block
|
Only the values 0 and 1 are accepted
|
|
Generate Level Array
(GenerateLevelArray)'
If this property is set to 1, a cell array will be generated that stores the level of each block
|
Only the values 0 and 1 are accepted
|
=SESAME Reader
Read SESAME data files, producing rectilinear grids
The SESAME reader reads SESAME data files, and outputs rectilinear grids. The expected file extension is .sesame.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
File Name
(FileName)'
This property specifies the file name for the SESAME reader
|
|
|
|
Table Id
(TableId)'
This proeprty indicates which table to read
|
-
The value must be one of the following:
|
=SLAC Data Reader
A reader for a data format used by Omega3p, Tau3p, and several<br
other tools used at the Standford Linear Accelerator Center (SLAC).<br
The underlying format uses netCDF to store arrays, but also imposes<br
several conventions to form an unstructured grid of elements.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
Mesh File Name
(MeshFileName)'
The name of the mesh file to load
|
|
|
|
Mode File Name
(ModeFileName)'
The name of the mode files to load. The points in the mode file should be the same as the mesh file
|
|
|
|
Read External Surface
(ReadExternalSurface)'
If on, read the external surfaces of the data set
|
Only the values 0 and 1 are accepted
|
|
Read Internal Volume
(ReadInternalVolume)'
If on, read the internal volume of the data set
|
Only the values 0 and 1 are accepted
|
|
Read Midpoints
(ReadMidpoints)'
If on, reads midpoint information for external surfaces and build
quadratic surface triangles
|
Only the values 0 and 1 are accepted
|
=SLAC Particle Data Reader
The SLAC Particle data reader.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
File Name
(FileName)'
A list of files to be read in a time series
|
|
|
=STL Reader
Read ASCII or binary stereo lithography (STL) files
The STL reader reads ASCII or binary stereo lithography (STL) files. The expected file extension is .stl. The output of this reader is a polygonal dataset. This reader also supports file series.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
File Names
(FileNames)'
The list of files to be read by the reader. If more than 1 file is specified, the reader will switch to file series mode in which it will pretend that it can support time and provide 1 file per time step
|
|
|
=Spy Plot Reader
Read files in the SPCTH Spy Plot file format
The Spy Plot reader loads an ASCII meta-file called the "case" file (extension .spcth). The case file lists all the binary files containing the dataset. This reader produces hierarchical datasets.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
Cell Arrays
(CellArrayStatus)'
This property lists which cell-centered arrays to read
|
The list of array names is provided by the reader
|
|
Distribute Files
(DistributeFiles)'
In parallel mode, if this property is set to 1, the reader will distribute files or blocks
|
Only the values 0 and 1 are accepted
|
|
Down Convert Volume Fraction
(DownConvertVolumeFraction)'
If this property is set to 0, the type of the volume fraction is float; is set to 1, the type is unsigned char
|
Only the values 0 and 1 are accepted
|
|
File Name
(FileName)'
This property specifies the file name for the Spy Plot reader
|
|
|
|
Generate Active Block Array
(GenerateActiveBlockArray)'
If this property is set to 1, a cell array will be generated that stores the active status of a block
|
Only the values 0 and 1 are accepted
|
|
Generate Block Id Array
(GenerateBlockIdArray)'
If this property is set to 1, a cell array will be generated that stores a unique blockId for each block
|
Only the values 0 and 1 are accepted
|
|
Generate Level Array
(GenerateLevelArray)'
If this property is set to 1, a cell array will be generated that stores the level of each block
|
Only the values 0 and 1 are accepted
|
|
Generate Tracer Array
(GenerateTracerArray)'
If this property is set to 1, a cell array will be generated that stores the coordinates of any tracers
|
Only the values 0 and 1 are accepted
|
|
Merge XYZComponents
(MergeXYZComponents)'
If this property is set to 1, cell arrays named (for example) X velocity, Y velocity and Z velocity will be combined into a single vector array named velocity
|
Only the values 0 and 1 are accepted
|
=TIFF Reader
Read a TIFF file into an image data
The TIFF reader reads TIFF (Tagged Image File Format) files, and the output is a uniform rectilinear (image/volume) dataset. The default file extension is .png.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
File Name
(FileName)'
This property specifies the file name for the TIFF reader
|
|
|
=Tecplot Reader
Read files in the Tecplot ASCII file format
The Tecplot reader extracts multiple zones (blocks) of data from a Tecplot ASCII file, in which a zone is stored in either point packing mode (i.e., tuple-based, with only point data supported) or block packing mode (i.e., component-based, with point data and cell data supported). The output of the reader is a vtkMultiBlockDataset, of which each block is either a vtkStructuredGrid or a vtkUnstructuredGrid. This supports reading a file series.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
File Names
(FileNames)'
The list of files to be read by the reader
|
|
|
|
Data Arrays
(DataArrayStatus)'
This property lists what dataset attribute arrays (point data and cell data) to read
|
The list of array names is provided by the reader
|
=VPIC Reader
Sorry, no help is currently available
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
File Name
(FileName)'
|
|
|
|
|
Point Arrays
(PointArrayStatus)'
|
|
The list of array names is provided by the reader
|
|
Stride
(SetStride)'
|
|
1 1
The value must be greater than or equal to 1
|
|
X Extent
(XExtent)'
|
|
-1 -
|
|
|
Y Extent
(YExtent)'
|
|
-1 -
|
|
|
Z Extent
(ZExtent)'
|
|
-1 -
|
|
=VRML Reader
Load the geometry from a VRML 2.0 file
The VRML reader loads only the geometry from a VRML (Virtual Reality Modeling Language) 2.0 file. The expected file extension is .wrl. The output of this reader is a polygonal dataset.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
File Name
(FileName)'
This property specifies the file name for the VRML reader
|
|
|
=Wavefront OBJ Reader
Read Wavefront .OBJ files to produce polygonal and line data
The OBJ reader reads data stored in Wavefront .OBJ format.<br
The expected file extension is .obj, the datasets resulting<br
from reading these files are polygons and lines.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
File Name
(FileName)'
This property specifies the file name for the OBJ reader
|
|
|
=WindBlade reader
Sorry, no help is currently available
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
File Name
(FileName)'
|
|
|
|
|
Point Arrays
(PointArrayStatus)'
|
|
The list of array names is provided by the reader
|
=XDMF Reader
Read XDMF (eXtensible Data Model and Format) files
The XDMF reader reads files in XDMF format. The expected file extension<br
is .xmf. Metadata is stored in the XDMF file using an XML format, and<br
large attribute arrays are stored in a corresponding HDF5 file. The<br
output may be unstructured grid, structured grid, or rectiliner grid.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
Cell Arrays
(CellArrayStatus)'
This property lists which the cell-centered arrays to read
|
The list of array names is provided by the reader
|
|
File Name
(FileName)'
This property specifies the file name for the XDMF reader
|
|
|
|
Grids
(GridStatus)'
|
|
|
|
|
Point Arrays
(PointArrayStatus)'
This property lists which the point-centered arrays to read
|
The list of array names is provided by the reader
|
|
Sets
(SetStatus)'
Select the sets to be loaded from the dataset, if any
|
The list of array names is provided by the reader
|
|
Stride
(Stride)'
If loading structured data, this property indicate the number o
indices per dimension (X, Y, or Z) to skip between each point include
in this output
|
1 1
The value must be greater than or equal to (1, 1, 1)
|
=XML Hierarchical Box Data reader
Read a VTK XML-based data file containing a hierarchical dataset containing vtkUniformGrids
The XML Hierarchical Box Data reader reads VTK's XML-based file format<br
containing a vtkHierarchicalBoxDataSet. The expected file extensions is<br
either .vthb or .vth.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
File Name
(FileName)'
The list of files to be read by the reader. Each file is expected to b
in the VTK XML polygonal dataset format. The standard extension i
.vtp. If more than 1 file is specified, the reader will switch to fil
series mode in which it will pretend that it can support time an
provide 1 file per time step
|
|
|
=XML Image Data Reader
Read serial VTK XML image data files
The XML Image Data reader reads the VTK XML image data file format. The standard extension is .vti. This reader also supports file series.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
File Name
(FileName)'
The list of files to be read by the reader. Each file is expected to be in the VTK XML image data format. The standard extension is .vti. If more than 1 file is specified, the reader will switch to file series mode in which it will pretend that it can support time and provide 1 file per time step
|
|
|
|
Cell Arrays
(CellArrayStatus)'
This property lists which cell-centered arrays to read
|
The list of array names is provided by the reader
|
|
Point Arrays
(PointArrayStatus)'
This property lists which point-centered arrays to read
|
The list of array names is provided by the reader
|
=XML MultiBlock Data Reader
Read a VTK XML multi-block data file and the serial VTK XML data files to which it points
The XML Multi-Block Data reader reads the VTK XML multi-block data file<br
format. XML multi-block data files are meta-files that point to a list of<br
serial VTK XML files. When reading in parallel, this reader will<br
distribute sub-blocks among processors. The expected file extensions are<br
.vtm and .vtmb.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
File Name
(FileName)'
The list of files to be read by the reader. Each file is expected to b
in the VTK XML polygonal dataset format. The standard extension i
.vtp. If more than 1 file is specified, the reader will switch to fil
series mode in which it will pretend that it can support time an
provide 1 file per time step
|
|
|
=XML Partitioned Image Data Reader
Read the summary file and the associated VTK XML image data files
The XML Partitioned Image Data reader reads the partitioned VTK image data file format. It reads the partitioned format's summary file and then the associated VTK XML image data files. The expected file extension is .pvti. This reader also supports file series.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
File Name
(FileName)'
The list of files to be read by the reader. Each file is expected to be in the partitioned VTK XML image data format. The standard extension is .pvti. If more than 1 file is specified, the reader will switch to file series mode in which it will pretend that it can support time and provide 1 file per time step
|
|
|
|
Cell Arrays
(CellArrayStatus)'
This propert lists which cell-centered arrays to read
|
The list of array names is provided by the reader
|
|
Point Arrays
(PointArrayStatus)'
This property lists which point-centered arrays to read
|
The list of array names is provided by the reader
|
=XML Partitioned Polydata Reader
Read the summary file and the assicoated VTK XML polydata files
The XML Partitioned Polydata reader reads the partitioned VTK polydata file format. It reads the partitioned format's summary file and then the associated VTK XML polydata files. The expected file extension is .pvtp. This reader also supports file series.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
File Name
(FileName)'
The list of files to be read by the reader. Each file is expected to be in the partitioned VTK XML polygonal dataset format. The standard extension is .pvtp. If more than 1 file is specified, the reader will switch to file series mode in which it will pretend that it can support time and provide 1 file per time step
|
|
|
|
Cell Arrays
(CellArrayStatus)'
This property lists which cell-centered arrays to read
|
The list of array names is provided by the reader
|
|
Point Arrays
(PointArrayStatus)'
This property lists which point-centered arrays to read
|
The list of array names is provided by the reader
|
=XML Partitioned Rectilinear Grid Reader
Read the summary file and the associated VTK XML rectilinear grid data files
The XML Partitioned Rectilinear Grid reader reads the partitioned VTK rectilinear grid file format. It reads the partitioned format's summary file and then the associated VTK XML rectilinear grid files. The expected file extension is .pvtr. This reader also supports file series.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
File Name
(FileName)'
The list of files to be read by the reader. Each file is expected to be in the partitioned VTK XML rectilinear grid data format. The standard extension is .pvtr. If more than 1 file is specified, the reader will switch to file series mode in which it will pretend that it can support time and provide 1 file per time step
|
|
|
|
Cell Arrays
(CellArrayStatus)'
This property lists which cell-centered arrays to read
|
The list of array names is provided by the reader
|
|
Point Arrays
(PointArrayStatus)'
This property lists which point-centered arrays to read
|
The list of array names is provided by the reader
|
=XML Partitioned Structured Grid Reader
Read the summary file and the associated VTK XML structured grid data files
The XML Partitioned Structured Grid reader reads the partitioned VTK structured grid data file format. It reads the partitioned format's summary file and then the associated VTK XML structured grid data files. The expected file extension is .pvts. This reader also supports file series.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
File Name
(FileName)'
The list of files to be read by the reader. Each file is expected to be in the partitioned VTK XML structured grid data format. The standard extension is .pvts. If more than 1 file is specified, the reader will switch to file series mode in which it will pretend that it can support time and provide 1 file per time step
|
|
|
|
Cell Arrays
(CellArrayStatus)'
This property lists which cell-centered arrays to read
|
The list of array names is provided by the reader
|
|
Point Arrays
(PointArrayStatus)'
This property lists which point-centered arrays to read
|
The list of array names is provided by the reader
|
=XML Partitioned Unstructured Grid Reader
Read the summary file and the associated VTK XML unstructured grid data files
The XML Partitioned Unstructured Grid reader reads the partitioned VTK unstructured grid data file format. It reads the partitioned format's summary file and then the associated VTK XML unstructured grid data files. The expected file extension is .pvtu. This reader also supports file series.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
File Name
(FileName)'
The list of files to be read by the reader. Each file is expected to be in the partitioned VTK XML unstructured grid data format. The standard extension is .pvtu. If more than 1 file is specified, the reader will switch to file series mode in which it will pretend that it can support time and provide 1 file per time step
|
|
|
|
Cell Arrays
(CellArrayStatus)'
This property lists which cell-centered arrays to read
|
The list of array names is provided by the reader
|
|
Point Arrays
(PointArrayStatus)'
This property lists which point-centered arrays to read
|
The list of array names is provided by the reader
|
=XML PolyData Reader
Read serial VTK XML polydata files
The XML Polydata reader reads the VTK XML polydata file format. The standard extension is .vtp. This reader also supports file series.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
File Name
(FileName)'
The list of files to be read by the reader. Each file is expected to be in the VTK XML polygonal dataset format. The standard extension is .vtp. If more than 1 file is specified, the reader will switch to file series mode in which it will pretend that it can support time and provide 1 file per time step
|
|
|
|
Cell Arrays
(CellArrayStatus)'
This property lists which cell-centered arrays to read
|
The list of array names is provided by the reader
|
|
Point Arrays
(PointArrayStatus)'
This property lists which point-centered arrays to read
|
The list of array names is provided by the reader
|
=XML Rectilinear Grid Reader
Read serial VTK XML rectilinear grid data files
The XML Rectilinear Grid reader reads the VTK XML rectilinear grid data file format. The standard extension is .vtr. This reader also supports file series.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
File Name
(FileName)'
The list of files to be read by the reader. Each file is expected to be in the VTK XML rectilinear grid data format. The standard extension is .vtr. If more than 1 file is specified, the reader will switch to file series mode in which it will pretend that it can support time and provide 1 file per time step
|
|
|
|
Cell Arrays
(CellArrayStatus)'
This property lists which cell-centered arrays to read
|
The list of array names is provided by the reader
|
|
Point Arrays
(PointArrayStatus)'
This property lists which point-centered arrays to read
|
The list of array names is provided by the reader
|
=XML Structured Grid Reader
Read serial VTK XML structured grid data files
The XML Structured Grid reader reads the VTK XML structured grid data file format. The standard extension is .vts. This reader also supports file series.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
File Name
(FileName)'
The list of files to be read by the reader. Each file is expected to be in the VTK XML structured grid data format. The standard extension is .vts. If more than 1 file is specified, the reader will switch to file series mode in which it will pretend that it can support time and provide 1 file per time step
|
|
|
|
Cell Arrays
(CellArrayStatus)'
This property lists which cell-centered arrays to read
|
The list of array names is provided by the reader
|
|
Point Arrays
(PointArrayStatus)'
This property lists which point-centered arrays to read
|
The list of array names is provided by the reader
|
=XML Unstructured Grid Reader
Read serial VTK XML unstructured grid data files
The XML Unstructured Grid reader reads the VTK XML unstructured grid data file format. The standard extension is .vtu. This reader also supports file series.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
File Name
(FileName)'
The list of files to be read by the reader. Each file is expected to be in the VTK XML unstructured grid data format. The standard extension is .vtu. If more than 1 file is specified, the reader will switch to file series mode in which it will pretend that it can support time and provide 1 file per time step
|
|
|
|
Cell Arrays
(CellArrayStatus)'
This property lists which cell-centered arrays to read
|
The list of array names is provided by the reader
|
|
Point Arrays
(PointArrayStatus)'
This property lists which point-centered arrays to read
|
The list of array names is provided by the reader
|
=XYZ Reader
Read XYZ molecular data files into a polygonal dataset
The XYZ reader reads XYZ molecular data files. The expected file extension is .xyz. The output of this reader is a polygonal dataset.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
File Name
(FileName)'
This property specifies the file name for the XYZ reader
|
|
|
|
Time Step
(TimeStep)'
This property specifies the timestep the XYZ reader should load
|
|
|
=proSTAR (STARCD) Reader
Reads geometry in proSTAR (STARCD) file format
ProStarReader creates an unstructured grid dataset.<br
It reads .cel/.vrt files stored in proSTAR (STARCD) ASCII format.<br
|
|
'Property
|
'Description
|
'Default Value(s)
|
'Restrictions
|
|
File Name
(FileName)'
Set the file name for the proSTAR (STARCD) reader
|
|
|
|
Scale Factor
(ScaleFactor)'
Scaling factor for the point
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
