CPack 2.8.8 Docs
From KitwarePublic
Jump to navigationJump to search
cpack version 2.8.8
------------------------------------------------------------------------------
Name
cpack - Packaging driver provided by CMake.
------------------------------------------------------------------------------
Usage
cpack -G <generator> [options]
------------------------------------------------------------------------------
Description
The "cpack" executable is the CMake packaging program. CMake-generated build
trees created for projects that use the INSTALL_* commands have packaging
support. This program will generate the package.
CMake is a cross-platform build system generator. Projects specify their
build process with platform-independent CMake listfiles included in each
directory of a source tree with the name CMakeLists.txt. Users build a
project by using CMake to generate a build system for a native tool on their
platform.
------------------------------------------------------------------------------
Options
-G <generator>
Use the specified generator to generate package.
CPack may support multiple native packaging systems on certain
platforms. A generator is responsible for generating input files for
particular system and invoking that systems. Possible generator names
are specified in the Generators section.
-C <Configuration>
Specify the project configuration
This option specifies the configuration that the project was build
with, for example 'Debug', 'Release'.
-D <var>=<value>
Set a CPack variable.
Set a variable that can be used by the generator.
--config <config file>
Specify the config file.
Specify the config file to use to create the package. By default
CPackConfig.cmake in the current directory will be used.
--verbose,-V
enable verbose output
Run cpack with verbose output.
--debug
enable debug output (for CPack developers)
Run cpack with debug output (for CPack developers).
-P <package name>
override/define CPACK_PACKAGE_NAME
If the package name is not specified on cpack commmand line
thenCPack.cmake defines it as CMAKE_PROJECT_NAME
-R <package version>
override/define CPACK_PACKAGE_VERSION
If version is not specified on cpack command line thenCPack.cmake
defines it from CPACK_PACKAGE_VERSION_[MAJOR|MINOR|PATCH]look into
CPack.cmake for detail
-B <package directory>
override/define CPACK_PACKAGE_DIRECTORY
The directory where CPack will be doing its packaging work.The
resulting package will be found there. Inside this directoryCPack
creates '_CPack_Packages' sub-directory which is theCPack temporary
directory.
--vendor <vendor name>
override/define CPACK_PACKAGE_VENDOR
If vendor is not specified on cpack command line (or inside
CMakeLists.txt) thenCPack.cmake defines it with a default value
--help-command cmd [file]
Print help for a single command and exit.
Full documentation specific to the given command is displayed. If a
file is specified, the documentation is written into and the output
format is determined depending on the filename suffix. Supported are
man page, HTML, DocBook and plain text.
--help-command-list [file]
List available commands and exit.
The list contains all commands for which help may be obtained by using
the --help-command argument followed by a command name. If a file is
specified, the documentation is written into and the output format is
determined depending on the filename suffix. Supported are man page,
HTML, DocBook and plain text.
--help-commands [file]
Print help for all commands and exit.
Full documentation specific for all current command is displayed.If a
file is specified, the documentation is written into and the output
format is determined depending on the filename suffix. Supported are
man page, HTML, DocBook and plain text.
--help-variable var [file]
Print help for a single variable and exit.
Full documentation specific to the given variable is displayed.If a
file is specified, the documentation is written into and the output
format is determined depending on the filename suffix. Supported are
man page, HTML, DocBook and plain text.
--help-variable-list [file]
List documented variables and exit.
The list contains all variables for which help may be obtained by
using the --help-variable argument followed by a variable name. If a
file is specified, the help is written into it.If a file is specified,
the documentation is written into and the output format is determined
depending on the filename suffix. Supported are man page, HTML,
DocBook and plain text.
--help-variables [file]
Print help for all variables and exit.
Full documentation for all variables is displayed.If a file is
specified, the documentation is written into and the output format is
determined depending on the filename suffix. Supported are man page,
HTML, DocBook and plain text.
--copyright [file]
Print the CMake copyright and exit.
If a file is specified, the copyright is written into it.
--help,-help,-usage,-h,-H,/?
Print usage information and exit.
Usage describes the basic command line interface and its options.
--help-full [file]
Print full help and exit.
Full help displays most of the documentation provided by the UNIX man
page. It is provided for use on non-UNIX platforms, but is also
convenient if the man page is not installed. If a file is specified,
the help is written into it.
--help-html [file]
Print full help in HTML format.
This option is used by CMake authors to help produce web pages. If a
file is specified, the help is written into it.
--help-man [file]
Print full help as a UNIX man page and exit.
This option is used by the cmake build to generate the UNIX man page.
If a file is specified, the help is written into it.
--version,-version,/V [file]
Show program name/version banner and exit.
If a file is specified, the version is written into it.
------------------------------------------------------------------------------
Generators
DEB
Debian packages
NSIS
Null Soft Installer
RPM
RPM packages
STGZ
Self extracting Tar GZip compression
TBZ2
Tar BZip2 compression
TGZ
Tar GZip compression
TZ
Tar Compress compression
ZIP
ZIP file format
------------------------------------------------------------------------------
Commands
cpack_add_component
Describes a CPack installation component named by the COMPONENT
argument to a CMake INSTALL command.
cpack_add_component(compname
[DISPLAY_NAME name]
[DESCRIPTION description]
[HIDDEN | REQUIRED | DISABLED ]
[GROUP group]
[DEPENDS comp1 comp2 ... ]
[INSTALL_TYPES type1 type2 ... ]
[DOWNLOADED]
[ARCHIVE_FILE filename])
The cmake_add_component command describes an installation
component, which the user can opt to install or remove as part of
the graphical installation process. compname is the name of the
component, as provided to the COMPONENT argument of one or more
CMake INSTALL commands.
DISPLAY_NAME is the displayed name of the component, used in
graphical installers to display the component name. This value can
be any string.
DESCRIPTION is an extended description of the component, used in
graphical installers to give the user additional information about
the component. Descriptions can span multiple lines using "\n" as
the line separator. Typically, these descriptions should be no
more than a few lines long.
HIDDEN indicates that this component will be hidden in the
graphical installer, so that the user cannot directly change
whether it is installed or not.
REQUIRED indicates that this component is required, and therefore
will always be installed. It will be visible in the graphical
installer, but it cannot be unselected. (Typically, required
components are shown greyed out).
DISABLED indicates that this component should be disabled
(unselected) by default. The user is free to select this component
for installation, unless it is also HIDDEN.
DEPENDS lists the components on which this component depends. If
this component is selected, then each of the components listed
must also be selected. The dependency information is encoded
within the installer itself, so that users cannot install
inconsitent sets of components.
GROUP names the component group of which this component is a
part. If not provided, the component will be a standalone
component, not part of any component group. Component groups are
described with the cpack_add_component_group command, detailed
below.
INSTALL_TYPES lists the installation types of which this component
is a part. When one of these installations types is selected, this
component will automatically be selected. Installation types are
described with the cpack_add_install_type command, detailed below.
DOWNLOADED indicates that this component should be downloaded
on-the-fly by the installer, rather than packaged in with the
installer itself. For more information, see the cpack_configure_downloads
command.
ARCHIVE_FILE provides a name for the archive file created by CPack
to be used for downloaded components. If not supplied, CPack will
create a file with some name based on CPACK_PACKAGE_FILE_NAME and
the name of the component. See cpack_configure_downloads for more
information.
cpack_add_component_group
Describes a group of related CPack installation components.
cpack_add_component_group(groupname
[DISPLAY_NAME name]
[DESCRIPTION description]
[PARENT_GROUP parent]
[EXPANDED]
[BOLD_TITLE])
The cpack_add_component_group describes a group of installation
components, which will be placed together within the listing of
options. Typically, component groups allow the user to
select/deselect all of the components within a single group via a
single group-level option. Use component groups to reduce the
complexity of installers with many options. groupname is an
arbitrary name used to identify the group in the GROUP argument of
the cpack_add_component command, which is used to place a
component in a group. The name of the group must not conflict with
the name of any component.
DISPLAY_NAME is the displayed name of the component group, used in
graphical installers to display the component group name. This
value can be any string.
DESCRIPTION is an extended description of the component group,
used in graphical installers to give the user additional
information about the components within that group. Descriptions
can span multiple lines using "\n" as the line
separator. Typically, these descriptions should be no more than a
few lines long.
PARENT_GROUP, if supplied, names the parent group of this group.
Parent groups are used to establish a hierarchy of groups,
providing an arbitrary hierarchy of groups.
EXPANDED indicates that, by default, the group should show up as
"expanded", so that the user immediately sees all of the
components within the group. Otherwise, the group will initially
show up as a single entry.
BOLD_TITLE indicates that the group title should appear in bold,
to call the user's attention to the group.
cpack_add_install_type
Add a new installation type containing a set of predefined component
selections to the graphical installer.
cpack_add_install_type(typename
[DISPLAY_NAME name])
The cpack_add_install_type command identifies a set of preselected
components that represents a common use case for an
application. For example, a "Developer" install type might include
an application along with its header and library files, while an
"End user" install type might just include the application's
executable. Each component identifies itself with one or more
install types via the INSTALL_TYPES argument to
cpack_add_component.
DISPLAY_NAME is the displayed name of the install type, which will
typically show up in a drop-down box within a graphical
installer. This value can be any string.
cpack_configure_downloads
Configure CPack to download selected components on-the-fly as part of
the installation process.
cpack_configure_downloads(site
[UPLOAD_DIRECTORY dirname]
[ALL]
[ADD_REMOVE|NO_ADD_REMOVE])
The cpack_configure_downloads command configures installation-time
downloads of selected components. For each downloadable component,
CPack will create an archive containing the contents of that
component, which should be uploaded to the given site. When the
user selects that component for installation, the installer will
download and extract the component in place. This feature is
useful for creating small installers that only download the
requested components, saving bandwidth. Additionally, the
installers are small enough that they will be installed as part of
the normal installation process, and the "Change" button in
Windows Add/Remove Programs control panel will allow one to add or
remove parts of the application after the original
installation. On Windows, the downloaded-components functionality
requires the ZipDLL plug-in for NSIS, available at:
http://nsis.sourceforge.net/ZipDLL_plug-in
On Mac OS X, installers that download components on-the-fly can
only be built and installed on system using Mac OS X 10.5 or
later.
The site argument is a URL where the archives for downloadable
components will reside, e.g., http://www.cmake.org/files/2.6.1/installer/
All of the archives produced by CPack should be uploaded to that location.
UPLOAD_DIRECTORY is the local directory where CPack will create the
various archives for each of the components. The contents of this
directory should be uploaded to a location accessible by the URL given
in the site argument. If omitted, CPack will use the directory
CPackUploads inside the CMake binary directory to store the generated
archives.
The ALL flag indicates that all components be downloaded. Otherwise, only
those components explicitly marked as DOWNLOADED or that have a specified
ARCHIVE_FILE will be downloaded. Additionally, the ALL option implies
ADD_REMOVE (unless NO_ADD_REMOVE is specified).
ADD_REMOVE indicates that CPack should install a copy of the installer
that can be called from Windows' Add/Remove Programs dialog (via the
"Modify" button) to change the set of installed components. NO_ADD_REMOVE
turns off this behavior. This option is ignored on Mac OS X.
break
Break from an enclosing foreach or while loop.
break()
Breaks from an enclosing foreach loop or while loop
cmake_minimum_required
Set the minimum required version of cmake for a project.
cmake_minimum_required(VERSION major[.minor[.patch[.tweak]]]
[FATAL_ERROR])
If the current version of CMake is lower than that required it will
stop processing the project and report an error. When a version
higher than 2.4 is specified the command implicitly invokes
cmake_policy(VERSION major[.minor[.patch[.tweak]]])
which sets the cmake policy version level to the version specified.
When version 2.4 or lower is given the command implicitly invokes
cmake_policy(VERSION 2.4)
which enables compatibility features for CMake 2.4 and lower.
The FATAL_ERROR option is accepted but ignored by CMake 2.6 and
higher. It should be specified so CMake versions 2.4 and lower fail
with an error instead of just a warning.
cmake_policy
Manage CMake Policy settings.
As CMake evolves it is sometimes necessary to change existing behavior
in order to fix bugs or improve implementations of existing features.
The CMake Policy mechanism is designed to help keep existing projects
building as new versions of CMake introduce changes in behavior. Each
new policy (behavioral change) is given an identifier of the form
"CMP<NNNN>" where "<NNNN>" is an integer index. Documentation
associated with each policy describes the OLD and NEW behavior and the
reason the policy was introduced. Projects may set each policy to
select the desired behavior. When CMake needs to know which behavior
to use it checks for a setting specified by the project. If no
setting is available the OLD behavior is assumed and a warning is
produced requesting that the policy be set.
The cmake_policy command is used to set policies to OLD or NEW
behavior. While setting policies individually is supported, we
encourage projects to set policies based on CMake versions.
cmake_policy(VERSION major.minor[.patch[.tweak]])
Specify that the current CMake list file is written for the given
version of CMake. All policies introduced in the specified version or
earlier will be set to use NEW behavior. All policies introduced
after the specified version will be unset (unless variable
CMAKE_POLICY_DEFAULT_CMP<NNNN> sets a default). This effectively
requests behavior preferred as of a given CMake version and tells
newer CMake versions to warn about their new policies. The policy
version specified must be at least 2.4 or the command will report an
error. In order to get compatibility features supporting versions
earlier than 2.4 see documentation of policy CMP0001.
cmake_policy(SET CMP<NNNN> NEW)
cmake_policy(SET CMP<NNNN> OLD)
Tell CMake to use the OLD or NEW behavior for a given policy.
Projects depending on the old behavior of a given policy may silence a
policy warning by setting the policy state to OLD. Alternatively one
may fix the project to work with the new behavior and set the policy
state to NEW.
cmake_policy(GET CMP<NNNN> <variable>)
Check whether a given policy is set to OLD or NEW behavior. The
output variable value will be "OLD" or "NEW" if the policy is set, and
empty otherwise.
CMake keeps policy settings on a stack, so changes made by the
cmake_policy command affect only the top of the stack. A new entry on
the policy stack is managed automatically for each subdirectory to
protect its parents and siblings. CMake also manages a new entry for
scripts loaded by include() and find_package() commands except when
invoked with the NO_POLICY_SCOPE option (see also policy CMP0011).
The cmake_policy command provides an interface to manage custom
entries on the policy stack:
cmake_policy(PUSH)
cmake_policy(POP)
Each PUSH must have a matching POP to erase any changes. This is
useful to make temporary changes to policy settings.
Functions and macros record policy settings when they are created and
use the pre-record policies when they are invoked. If the function or
macro implementation sets policies, the changes automatically
propagate up through callers until they reach the closest nested
policy stack entry.
configure_file
Copy a file to another location and modify its contents.
configure_file(<input> <output>
[COPYONLY] [ESCAPE_QUOTES] [@ONLY]
[NEWLINE_STYLE [UNIX|DOS|WIN32|LF|CRLF] ])
Copies a file <input> to file <output> and substitutes variable values
referenced in the file content. If <input> is a relative path it is
evaluated with respect to the current source directory. The <input>
must be a file, not a directory. If <output> is a relative path it is
evaluated with respect to the current binary directory. If <output>
names an existing directory the input file is placed in that directory
with its original name.
This command replaces any variables in the input file referenced as
${VAR} or @VAR@ with their values as determined by CMake. If a
variable is not defined, it will be replaced with nothing. If
COPYONLY is specified, then no variable expansion will take place. If
ESCAPE_QUOTES is specified then any substituted quotes will be C-style
escaped. The file will be configured with the current values of CMake
variables. If @ONLY is specified, only variables of the form @VAR@
will be replaces and ${VAR} will be ignored. This is useful for
configuring scripts that use ${VAR}. Any occurrences of #cmakedefine
VAR will be replaced with either #define VAR or /* #undef VAR */
depending on the setting of VAR in CMake. Any occurrences of
#cmakedefine01 VAR will be replaced with either #define VAR 1 or
#define VAR 0 depending on whether VAR evaluates to TRUE or FALSE in
CMake.
With NEWLINE_STYLE the line ending could be adjusted:
'UNIX' or 'LF' for \n, 'DOS', 'WIN32' or 'CRLF' for \r\n.
COPYONLY must not be used with NEWLINE_STYLE.
else
Starts the else portion of an if block.
else(expression)
See the if command.
elseif
Starts the elseif portion of an if block.
elseif(expression)
See the if command.
endforeach
Ends a list of commands in a FOREACH block.
endforeach(expression)
See the FOREACH command.
endfunction
Ends a list of commands in a function block.
endfunction(expression)
See the function command.
endif
Ends a list of commands in an if block.
endif(expression)
See the if command.
endmacro
Ends a list of commands in a macro block.
endmacro(expression)
See the macro command.
endwhile
Ends a list of commands in a while block.
endwhile(expression)
See the while command.
execute_process
Execute one or more child processes.
execute_process(COMMAND <cmd1> [args1...]]
[COMMAND <cmd2> [args2...] [...]]
[WORKING_DIRECTORY <directory>]
[TIMEOUT <seconds>]
[RESULT_VARIABLE <variable>]
[OUTPUT_VARIABLE <variable>]
[ERROR_VARIABLE <variable>]
[INPUT_FILE <file>]
[OUTPUT_FILE <file>]
[ERROR_FILE <file>]
[OUTPUT_QUIET]
[ERROR_QUIET]
[OUTPUT_STRIP_TRAILING_WHITESPACE]
[ERROR_STRIP_TRAILING_WHITESPACE])
Runs the given sequence of one or more commands with the standard
output of each process piped to the standard input of the next. A
single standard error pipe is used for all processes. If
WORKING_DIRECTORY is given the named directory will be set as the
current working directory of the child processes. If TIMEOUT is given
the child processes will be terminated if they do not finish in the
specified number of seconds (fractions are allowed). If
RESULT_VARIABLE is given the variable will be set to contain the
result of running the processes. This will be an integer return code
from the last child or a string describing an error condition. If
OUTPUT_VARIABLE or ERROR_VARIABLE are given the variable named will be
set with the contents of the standard output and standard error pipes
respectively. If the same variable is named for both pipes their
output will be merged in the order produced. If INPUT_FILE,
OUTPUT_FILE, or ERROR_FILE is given the file named will be attached to
the standard input of the first process, standard output of the last
process, or standard error of all processes respectively. If
OUTPUT_QUIET or ERROR_QUIET is given then the standard output or
standard error results will be quietly ignored. If more than one
OUTPUT_* or ERROR_* option is given for the same pipe the precedence
is not specified. If no OUTPUT_* or ERROR_* options are given the
output will be shared with the corresponding pipes of the CMake
process itself.
The execute_process command is a newer more powerful version of
exec_program, but the old command has been kept for compatibility.
file
File manipulation command.
file(WRITE filename "message to write"... )
file(APPEND filename "message to write"... )
file(READ filename variable [LIMIT numBytes] [OFFSET offset] [HEX])
file(<MD5|SHA1|SHA224|SHA256|SHA384|SHA512> filename variable)
file(STRINGS filename variable [LIMIT_COUNT num]
[LIMIT_INPUT numBytes] [LIMIT_OUTPUT numBytes]
[LENGTH_MINIMUM numBytes] [LENGTH_MAXIMUM numBytes]
[NEWLINE_CONSUME] [REGEX regex]
[NO_HEX_CONVERSION])
file(GLOB variable [RELATIVE path] [globbing expressions]...)
file(GLOB_RECURSE variable [RELATIVE path]
[FOLLOW_SYMLINKS] [globbing expressions]...)
file(RENAME <oldname> <newname>)
file(REMOVE [file1 ...])
file(REMOVE_RECURSE [file1 ...])
file(MAKE_DIRECTORY [directory1 directory2 ...])
file(RELATIVE_PATH variable directory file)
file(TO_CMAKE_PATH path result)
file(TO_NATIVE_PATH path result)
file(DOWNLOAD url file [INACTIVITY_TIMEOUT timeout]
[TIMEOUT timeout] [STATUS status] [LOG log] [SHOW_PROGRESS]
[EXPECTED_MD5 sum])
file(UPLOAD filename url [INACTIVITY_TIMEOUT timeout]
[TIMEOUT timeout] [STATUS status] [LOG log] [SHOW_PROGRESS])
WRITE will write a message into a file called 'filename'. It
overwrites the file if it already exists, and creates the file if it
does not exist.
APPEND will write a message into a file same as WRITE, except it will
append it to the end of the file
READ will read the content of a file and store it into the variable.
It will start at the given offset and read up to numBytes. If the
argument HEX is given, the binary data will be converted to
hexadecimal representation and this will be stored in the variable.
MD5, SHA1, SHA224, SHA256, SHA384, and SHA512 will compute a
cryptographic hash of the content of a file.
STRINGS will parse a list of ASCII strings from a file and store it in
a variable. Binary data in the file are ignored. Carriage return
(CR) characters are ignored. It works also for Intel Hex and Motorola
S-record files, which are automatically converted to binary format
when reading them. Disable this using NO_HEX_CONVERSION.
LIMIT_COUNT sets the maximum number of strings to return. LIMIT_INPUT
sets the maximum number of bytes to read from the input file.
LIMIT_OUTPUT sets the maximum number of bytes to store in the output
variable. LENGTH_MINIMUM sets the minimum length of a string to
return. Shorter strings are ignored. LENGTH_MAXIMUM sets the maximum
length of a string to return. Longer strings are split into strings
no longer than the maximum length. NEWLINE_CONSUME allows newlines to
be included in strings instead of terminating them.
REGEX specifies a regular expression that a string must match to be
returned. Typical usage
file(STRINGS myfile.txt myfile)
stores a list in the variable "myfile" in which each item is a line
from the input file.
GLOB will generate a list of all files that match the globbing
expressions and store it into the variable. Globbing expressions are
similar to regular expressions, but much simpler. If RELATIVE flag is
specified for an expression, the results will be returned as a
relative path to the given path. (We do not recommend using GLOB to
collect a list of source files from your source tree. If no
CMakeLists.txt file changes when a source is added or removed then the
generated build system cannot know when to ask CMake to regenerate.)
Examples of globbing expressions include:
*.cxx - match all files with extension cxx
*.vt? - match all files with extension vta,...,vtz
f[3-5].txt - match files f3.txt, f4.txt, f5.txt
GLOB_RECURSE will generate a list similar to the regular GLOB, except
it will traverse all the subdirectories of the matched directory and
match the files. Subdirectories that are symlinks are only traversed
if FOLLOW_SYMLINKS is given or cmake policy CMP0009 is not set to NEW.
See cmake --help-policy CMP0009 for more information.
Examples of recursive globbing include:
/dir/*.py - match all python files in /dir and subdirectories
MAKE_DIRECTORY will create the given directories, also if their parent
directories don't exist yet
RENAME moves a file or directory within a filesystem, replacing the
destination atomically.
REMOVE will remove the given files, also in subdirectories
REMOVE_RECURSE will remove the given files and directories, also
non-empty directories
RELATIVE_PATH will determine relative path from directory to the given
file.
TO_CMAKE_PATH will convert path into a cmake style path with unix /.
The input can be a single path or a system path like "$ENV{PATH}".
Note the double quotes around the ENV call TO_CMAKE_PATH only takes
one argument. This command will also convert the native list
delimiters for a list of paths like the PATH environment variable.
TO_NATIVE_PATH works just like TO_CMAKE_PATH, but will convert from a
cmake style path into the native path style \ for windows and / for
UNIX.
DOWNLOAD will download the given URL to the given file. If LOG var is
specified a log of the download will be put in var. If STATUS var is
specified the status of the operation will be put in var. The status
is returned in a list of length 2. The first element is the numeric
return value for the operation, and the second element is a string
value for the error. A 0 numeric error means no error in the
operation. If TIMEOUT time is specified, the operation will timeout
after time seconds, time should be specified as an integer. The
INACTIVITY_TIMEOUT specifies an integer number of seconds of
inactivity after which the operation should terminate. If
EXPECTED_MD5 sum is specified, the operation will verify that the
downloaded file's actual md5 sum matches the expected value. If it
does not match, the operation fails with an error. If SHOW_PROGRESS
is specified, progress information will be printed as status messages
until the operation is complete.
UPLOAD will upload the given file to the given URL. If LOG var is
specified a log of the upload will be put in var. If STATUS var is
specified the status of the operation will be put in var. The status
is returned in a list of length 2. The first element is the numeric
return value for the operation, and the second element is a string
value for the error. A 0 numeric error means no error in the
operation. If TIMEOUT time is specified, the operation will timeout
after time seconds, time should be specified as an integer. The
INACTIVITY_TIMEOUT specifies an integer number of seconds of
inactivity after which the operation should terminate. If
SHOW_PROGRESS is specified, progress information will be printed as
status messages until the operation is complete.
The file() command also provides COPY and INSTALL signatures:
file(<COPY|INSTALL> files... DESTINATION <dir>
[FILE_PERMISSIONS permissions...]
[DIRECTORY_PERMISSIONS permissions...]
[NO_SOURCE_PERMISSIONS] [USE_SOURCE_PERMISSIONS]
[FILES_MATCHING]
[[PATTERN <pattern> | REGEX <regex>]
[EXCLUDE] [PERMISSIONS permissions...]] [...])
The COPY signature copies files, directories, and symlinks to a
destination folder. Relative input paths are evaluated with respect
to the current source directory, and a relative destination is
evaluated with respect to the current build directory. Copying
preserves input file timestamps, and optimizes out a file if it exists
at the destination with the same timestamp. Copying preserves input
permissions unless explicit permissions or NO_SOURCE_PERMISSIONS are
given (default is USE_SOURCE_PERMISSIONS). See the install(DIRECTORY)
command for documentation of permissions, PATTERN, REGEX, and EXCLUDE
options.
The INSTALL signature differs slightly from COPY: it prints status
messages, and NO_SOURCE_PERMISSIONS is default. Installation scripts
generated by the install() command use this signature (with some
undocumented options for internal use).
find_file
Find the full path to a file.
find_file(<VAR> name1 [path1 path2 ...])
This is the short-hand signature for the command that is sufficient in
many cases. It is the same as find_file(<VAR> name1 [PATHS path1
path2 ...])
find_file(
<VAR>
name | NAMES name1 [name2 ...]
[HINTS path1 [path2 ... ENV var]]
[PATHS path1 [path2 ... ENV var]]
[PATH_SUFFIXES suffix1 [suffix2 ...]]
[DOC "cache documentation string"]
[NO_DEFAULT_PATH]
[NO_CMAKE_ENVIRONMENT_PATH]
[NO_CMAKE_PATH]
[NO_SYSTEM_ENVIRONMENT_PATH]
[NO_CMAKE_SYSTEM_PATH]
[CMAKE_FIND_ROOT_PATH_BOTH |
ONLY_CMAKE_FIND_ROOT_PATH |
NO_CMAKE_FIND_ROOT_PATH]
)
This command is used to find a full path to named file. A cache entry
named by <VAR> is created to store the result of this command. If the
full path to a file is found the result is stored in the variable and
the search will not be repeated unless the variable is cleared. If
nothing is found, the result will be <VAR>-NOTFOUND, and the search
will be attempted again the next time find_file is invoked with the
same variable. The name of the full path to a file that is searched
for is specified by the names listed after the NAMES argument.
Additional search locations can be specified after the PATHS argument.
If ENV var is found in the HINTS or PATHS section the environment
variable var will be read and converted from a system environment
variable to a cmake style list of paths. For example ENV PATH would
be a way to list the system path variable. The argument after DOC
will be used for the documentation string in the cache. PATH_SUFFIXES
specifies additional subdirectories to check below each search path.
If NO_DEFAULT_PATH is specified, then no additional paths are added to
the search. If NO_DEFAULT_PATH is not specified, the search process
is as follows:
1. Search paths specified in cmake-specific cache variables. These
are intended to be used on the command line with a -DVAR=value. This
can be skipped if NO_CMAKE_PATH is passed.
<prefix>/include for each <prefix> in CMAKE_PREFIX_PATH
CMAKE_INCLUDE_PATH
CMAKE_FRAMEWORK_PATH
2. Search paths specified in cmake-specific environment variables.
These are intended to be set in the user's shell configuration. This
can be skipped if NO_CMAKE_ENVIRONMENT_PATH is passed.
<prefix>/include for each <prefix> in CMAKE_PREFIX_PATH
CMAKE_INCLUDE_PATH
CMAKE_FRAMEWORK_PATH
3. Search the paths specified by the HINTS option. These should be
paths computed by system introspection, such as a hint provided by the
location of another item already found. Hard-coded guesses should be
specified with the PATHS option.
4. Search the standard system environment variables. This can be
skipped if NO_SYSTEM_ENVIRONMENT_PATH is an argument.
PATH
INCLUDE
5. Search cmake variables defined in the Platform files for the
current system. This can be skipped if NO_CMAKE_SYSTEM_PATH is
passed.
<prefix>/include for each <prefix> in CMAKE_SYSTEM_PREFIX_PATH
CMAKE_SYSTEM_INCLUDE_PATH
CMAKE_SYSTEM_FRAMEWORK_PATH
6. Search the paths specified by the PATHS option or in the
short-hand version of the command. These are typically hard-coded
guesses.
On Darwin or systems supporting OS X Frameworks, the cmake variable
CMAKE_FIND_FRAMEWORK can be set to empty or one of the following:
"FIRST" - Try to find frameworks before standard
libraries or headers. This is the default on Darwin.
"LAST" - Try to find frameworks after standard
libraries or headers.
"ONLY" - Only try to find frameworks.
"NEVER" - Never try to find frameworks.
On Darwin or systems supporting OS X Application Bundles, the cmake
variable CMAKE_FIND_APPBUNDLE can be set to empty or one of the
following:
"FIRST" - Try to find application bundles before standard
programs. This is the default on Darwin.
"LAST" - Try to find application bundles after standard
programs.
"ONLY" - Only try to find application bundles.
"NEVER" - Never try to find application bundles.
The CMake variable CMAKE_FIND_ROOT_PATH specifies one or more
directories to be prepended to all other search directories. This
effectively "re-roots" the entire search under given locations. By
default it is empty. It is especially useful when cross-compiling to
point to the root directory of the target environment and CMake will
search there too. By default at first the directories listed in
CMAKE_FIND_ROOT_PATH and then the non-rooted directories will be
searched. The default behavior can be adjusted by setting
CMAKE_FIND_ROOT_PATH_MODE_INCLUDE. This behavior can be manually
overridden on a per-call basis. By using CMAKE_FIND_ROOT_PATH_BOTH
the search order will be as described above. If
NO_CMAKE_FIND_ROOT_PATH is used then CMAKE_FIND_ROOT_PATH will not be
used. If ONLY_CMAKE_FIND_ROOT_PATH is used then only the re-rooted
directories will be searched.
The default search order is designed to be most-specific to
least-specific for common use cases. Projects may override the order
by simply calling the command multiple times and using the NO_*
options:
find_file(<VAR> NAMES name PATHS paths... NO_DEFAULT_PATH)
find_file(<VAR> NAMES name)
Once one of the calls succeeds the result variable will be set and
stored in the cache so that no call will search again.
find_library
Find a library.
find_library(<VAR> name1 [path1 path2 ...])
This is the short-hand signature for the command that is sufficient in
many cases. It is the same as find_library(<VAR> name1 [PATHS path1
path2 ...])
find_library(
<VAR>
name | NAMES name1 [name2 ...]
[HINTS path1 [path2 ... ENV var]]
[PATHS path1 [path2 ... ENV var]]
[PATH_SUFFIXES suffix1 [suffix2 ...]]
[DOC "cache documentation string"]
[NO_DEFAULT_PATH]
[NO_CMAKE_ENVIRONMENT_PATH]
[NO_CMAKE_PATH]
[NO_SYSTEM_ENVIRONMENT_PATH]
[NO_CMAKE_SYSTEM_PATH]
[CMAKE_FIND_ROOT_PATH_BOTH |
ONLY_CMAKE_FIND_ROOT_PATH |
NO_CMAKE_FIND_ROOT_PATH]
)
This command is used to find a library. A cache entry named by <VAR>
is created to store the result of this command. If the library is
found the result is stored in the variable and the search will not be
repeated unless the variable is cleared. If nothing is found, the
result will be <VAR>-NOTFOUND, and the search will be attempted again
the next time find_library is invoked with the same variable. The
name of the library that is searched for is specified by the names
listed after the NAMES argument. Additional search locations can be
specified after the PATHS argument. If ENV var is found in the HINTS
or PATHS section the environment variable var will be read and
converted from a system environment variable to a cmake style list of
paths. For example ENV PATH would be a way to list the system path
variable. The argument after DOC will be used for the documentation
string in the cache. PATH_SUFFIXES specifies additional
subdirectories to check below each search path.
If NO_DEFAULT_PATH is specified, then no additional paths are added to
the search. If NO_DEFAULT_PATH is not specified, the search process
is as follows:
1. Search paths specified in cmake-specific cache variables. These
are intended to be used on the command line with a -DVAR=value. This
can be skipped if NO_CMAKE_PATH is passed.
<prefix>/lib/<arch> if CMAKE_LIBRARY_ARCHITECTURE is set, and
<prefix>/lib for each <prefix> in CMAKE_PREFIX_PATH
CMAKE_LIBRARY_PATH
CMAKE_FRAMEWORK_PATH
2. Search paths specified in cmake-specific environment variables.
These are intended to be set in the user's shell configuration. This
can be skipped if NO_CMAKE_ENVIRONMENT_PATH is passed.
<prefix>/lib/<arch> if CMAKE_LIBRARY_ARCHITECTURE is set, and
<prefix>/lib for each <prefix> in CMAKE_PREFIX_PATH
CMAKE_LIBRARY_PATH
CMAKE_FRAMEWORK_PATH
3. Search the paths specified by the HINTS option. These should be
paths computed by system introspection, such as a hint provided by the
location of another item already found. Hard-coded guesses should be
specified with the PATHS option.
4. Search the standard system environment variables. This can be
skipped if NO_SYSTEM_ENVIRONMENT_PATH is an argument.
PATH
LIB
5. Search cmake variables defined in the Platform files for the
current system. This can be skipped if NO_CMAKE_SYSTEM_PATH is
passed.
<prefix>/lib/<arch> if CMAKE_LIBRARY_ARCHITECTURE is set, and
<prefix>/lib for each <prefix> in CMAKE_SYSTEM_PREFIX_PATH
CMAKE_SYSTEM_LIBRARY_PATH
CMAKE_SYSTEM_FRAMEWORK_PATH
6. Search the paths specified by the PATHS option or in the
short-hand version of the command. These are typically hard-coded
guesses.
On Darwin or systems supporting OS X Frameworks, the cmake variable
CMAKE_FIND_FRAMEWORK can be set to empty or one of the following:
"FIRST" - Try to find frameworks before standard
libraries or headers. This is the default on Darwin.
"LAST" - Try to find frameworks after standard
libraries or headers.
"ONLY" - Only try to find frameworks.
"NEVER" - Never try to find frameworks.
On Darwin or systems supporting OS X Application Bundles, the cmake
variable CMAKE_FIND_APPBUNDLE can be set to empty or one of the
following:
"FIRST" - Try to find application bundles before standard
programs. This is the default on Darwin.
"LAST" - Try to find application bundles after standard
programs.
"ONLY" - Only try to find application bundles.
"NEVER" - Never try to find application bundles.
The CMake variable CMAKE_FIND_ROOT_PATH specifies one or more
directories to be prepended to all other search directories. This
effectively "re-roots" the entire search under given locations. By
default it is empty. It is especially useful when cross-compiling to
point to the root directory of the target environment and CMake will
search there too. By default at first the directories listed in
CMAKE_FIND_ROOT_PATH and then the non-rooted directories will be
searched. The default behavior can be adjusted by setting
CMAKE_FIND_ROOT_PATH_MODE_LIBRARY. This behavior can be manually
overridden on a per-call basis. By using CMAKE_FIND_ROOT_PATH_BOTH
the search order will be as described above. If
NO_CMAKE_FIND_ROOT_PATH is used then CMAKE_FIND_ROOT_PATH will not be
used. If ONLY_CMAKE_FIND_ROOT_PATH is used then only the re-rooted
directories will be searched.
The default search order is designed to be most-specific to
least-specific for common use cases. Projects may override the order
by simply calling the command multiple times and using the NO_*
options:
find_library(<VAR> NAMES name PATHS paths... NO_DEFAULT_PATH)
find_library(<VAR> NAMES name)
Once one of the calls succeeds the result variable will be set and
stored in the cache so that no call will search again.
If the library found is a framework, then VAR will be set to the full
path to the framework <fullPath>/A.framework. When a full path to a
framework is used as a library, CMake will use a -framework A, and a
-F<fullPath> to link the framework to the target.
If the global property FIND_LIBRARY_USE_LIB64_PATHS is set all search
paths will be tested as normal, with "64/" appended, and with all
matches of "lib/" replaced with "lib64/". This property is
automatically set for the platforms that are known to need it if at
least one of the languages supported by the PROJECT command is
enabled.
find_package
Load settings for an external project.
find_package(<package> [version] [EXACT] [QUIET] [MODULE]
[[REQUIRED|COMPONENTS] [components...]]
[OPTIONAL_COMPONENTS components...]
[NO_POLICY_SCOPE])
Finds and loads settings from an external project. <package>_FOUND
will be set to indicate whether the package was found. When the
package is found package-specific information is provided through
variables documented by the package itself. The QUIET option disables
messages if the package cannot be found. The MODULE option disables
the second signature documented below. The REQUIRED option stops
processing with an error message if the package cannot be found.
A package-specific list of required components may be listed after the
COMPONENTS option or directly after the REQUIRED option. Additional
optional components may be listed after OPTIONAL_COMPONENTS.
Available components and their influence on whether a package is
considered to be found are defined by the target package.
The [version] argument requests a version with which the package found
should be compatible (format is major[.minor[.patch[.tweak]]]). The
EXACT option requests that the version be matched exactly. If no
[version] and/or component list is given to a recursive invocation
inside a find-module, the corresponding arguments are forwarded
automatically from the outer call (including the EXACT flag for
[version]). Version support is currently provided only on a
package-by-package basis (details below).
User code should generally look for packages using the above simple
signature. The remainder of this command documentation specifies the
full command signature and details of the search process. Project
maintainers wishing to provide a package to be found by this command
are encouraged to read on.
The command has two modes by which it searches for packages: "Module"
mode and "Config" mode. Module mode is available when the command is
invoked with the above reduced signature. CMake searches for a file
called "Find<package>.cmake" in the CMAKE_MODULE_PATH followed by the
CMake installation. If the file is found, it is read and processed by
CMake. It is responsible for finding the package, checking the
version, and producing any needed messages. Many find-modules provide
limited or no support for versioning; check the module documentation.
If no module is found and the MODULE option is not given the command
proceeds to Config mode.
The complete Config mode command signature is:
find_package(<package> [version] [EXACT] [QUIET]
[[REQUIRED|COMPONENTS] [components...]]
[CONFIG|NO_MODULE]
[NO_POLICY_SCOPE]
[NAMES name1 [name2 ...]]
[CONFIGS config1 [config2 ...]]
[HINTS path1 [path2 ... ]]
[PATHS path1 [path2 ... ]]
[PATH_SUFFIXES suffix1 [suffix2 ...]]
[NO_DEFAULT_PATH]
[NO_CMAKE_ENVIRONMENT_PATH]
[NO_CMAKE_PATH]
[NO_SYSTEM_ENVIRONMENT_PATH]
[NO_CMAKE_PACKAGE_REGISTRY]
[NO_CMAKE_BUILDS_PATH]
[NO_CMAKE_SYSTEM_PATH]
[NO_CMAKE_SYSTEM_PACKAGE_REGISTRY]
[CMAKE_FIND_ROOT_PATH_BOTH |
ONLY_CMAKE_FIND_ROOT_PATH |
NO_CMAKE_FIND_ROOT_PATH])
The CONFIG option may be used to skip Module mode explicitly and
switch to Config mode. It is synonymous to using NO_MODULE. Config
mode is also implied by use of options not specified in the reduced
signature.
Config mode attempts to locate a configuration file provided by the
package to be found. A cache entry called <package>_DIR is created to
hold the directory containing the file. By default the command
searches for a package with the name <package>. If the NAMES option
is given the names following it are used instead of <package>. The
command searches for a file called "<name>Config.cmake" or
"<lower-case-name>-config.cmake" for each name specified. A
replacement set of possible configuration file names may be given
using the CONFIGS option. The search procedure is specified below.
Once found, the configuration file is read and processed by CMake.
Since the file is provided by the package it already knows the
location of package contents. The full path to the configuration file
is stored in the cmake variable <package>_CONFIG.
All configuration files which have been considered by CMake while
searching for an installation of the package with an appropriate
version are stored in the cmake variable <package>_CONSIDERED_CONFIGS,
the associated versions in <package>_CONSIDERED_VERSIONS.
If the package configuration file cannot be found CMake will generate
an error describing the problem unless the QUIET argument is
specified. If REQUIRED is specified and the package is not found a
fatal error is generated and the configure step stops executing. If
<package>_DIR has been set to a directory not containing a
configuration file CMake will ignore it and search from scratch.
When the [version] argument is given Config mode will only find a
version of the package that claims compatibility with the requested
version (format is major[.minor[.patch[.tweak]]]). If the EXACT
option is given only a version of the package claiming an exact match
of the requested version may be found. CMake does not establish any
convention for the meaning of version numbers. Package version
numbers are checked by "version" files provided by the packages
themselves. For a candidate package configuration file
"<config-file>.cmake" the corresponding version file is located next
to it and named either "<config-file>-version.cmake" or
"<config-file>Version.cmake". If no such version file is available
then the configuration file is assumed to not be compatible with any
requested version. A basic version file containing generic version
matching code can be created using the macro
write_basic_package_version_file(), see its documentation for more
details. When a version file is found it is loaded to check the
requested version number. The version file is loaded in a nested
scope in which the following variables have been defined:
PACKAGE_FIND_NAME = the <package> name
PACKAGE_FIND_VERSION = full requested version string
PACKAGE_FIND_VERSION_MAJOR = major version if requested, else 0
PACKAGE_FIND_VERSION_MINOR = minor version if requested, else 0
PACKAGE_FIND_VERSION_PATCH = patch version if requested, else 0
PACKAGE_FIND_VERSION_TWEAK = tweak version if requested, else 0
PACKAGE_FIND_VERSION_COUNT = number of version components, 0 to 4
The version file checks whether it satisfies the requested version and
sets these variables:
PACKAGE_VERSION = full provided version string
PACKAGE_VERSION_EXACT = true if version is exact match
PACKAGE_VERSION_COMPATIBLE = true if version is compatible
PACKAGE_VERSION_UNSUITABLE = true if unsuitable as any version
These variables are checked by the find_package command to determine
whether the configuration file provides an acceptable version. They
are not available after the find_package call returns. If the version
is acceptable the following variables are set:
<package>_VERSION = full provided version string
<package>_VERSION_MAJOR = major version if provided, else 0
<package>_VERSION_MINOR = minor version if provided, else 0
<package>_VERSION_PATCH = patch version if provided, else 0
<package>_VERSION_TWEAK = tweak version if provided, else 0
<package>_VERSION_COUNT = number of version components, 0 to 4
and the corresponding package configuration file is loaded. When
multiple package configuration files are available whose version files
claim compatibility with the version requested it is unspecified which
one is chosen. No attempt is made to choose a highest or closest
version number.
Config mode provides an elaborate interface and search procedure.
Much of the interface is provided for completeness and for use
internally by find-modules loaded by Module mode. Most user code
should simply call
find_package(<package> [major[.minor]] [EXACT] [REQUIRED|QUIET])
in order to find a package. Package maintainers providing CMake
package configuration files are encouraged to name and install them
such that the procedure outlined below will find them without
requiring use of additional options.
CMake constructs a set of possible installation prefixes for the
package. Under each prefix several directories are searched for a
configuration file. The tables below show the directories searched.
Each entry is meant for installation trees following Windows (W), UNIX
(U), or Apple (A) conventions.
<prefix>/ (W)
<prefix>/(cmake|CMake)/ (W)
<prefix>/<name>*/ (W)
<prefix>/<name>*/(cmake|CMake)/ (W)
<prefix>/(lib/<arch>|lib|share)/cmake/<name>*/ (U)
<prefix>/(lib/<arch>|lib|share)/<name>*/ (U)
<prefix>/(lib/<arch>|lib|share)/<name>*/(cmake|CMake)/ (U)
On systems supporting OS X Frameworks and Application Bundles the
following directories are searched for frameworks or bundles
containing a configuration file:
<prefix>/<name>.framework/Resources/ (A)
<prefix>/<name>.framework/Resources/CMake/ (A)
<prefix>/<name>.framework/Versions/*/Resources/ (A)
<prefix>/<name>.framework/Versions/*/Resources/CMake/ (A)
<prefix>/<name>.app/Contents/Resources/ (A)
<prefix>/<name>.app/Contents/Resources/CMake/ (A)
In all cases the <name> is treated as case-insensitive and corresponds
to any of the names specified (<package> or names given by NAMES).
Paths with lib/<arch> are enabled if CMAKE_LIBRARY_ARCHITECTURE is
set. If PATH_SUFFIXES is specified the suffixes are appended to each
(W) or (U) directory entry one-by-one.
This set of directories is intended to work in cooperation with
projects that provide configuration files in their installation trees.
Directories above marked with (W) are intended for installations on
Windows where the prefix may point at the top of an application's
installation directory. Those marked with (U) are intended for
installations on UNIX platforms where the prefix is shared by multiple
packages. This is merely a convention, so all (W) and (U) directories
are still searched on all platforms. Directories marked with (A) are
intended for installations on Apple platforms. The cmake variables
CMAKE_FIND_FRAMEWORK and CMAKE_FIND_APPBUNDLE determine the order of
preference as specified below.
The set of installation prefixes is constructed using the following
steps. If NO_DEFAULT_PATH is specified all NO_* options are enabled.
1. Search paths specified in cmake-specific cache variables. These
are intended to be used on the command line with a -DVAR=value. This
can be skipped if NO_CMAKE_PATH is passed.
CMAKE_PREFIX_PATH
CMAKE_FRAMEWORK_PATH
CMAKE_APPBUNDLE_PATH
2. Search paths specified in cmake-specific environment variables.
These are intended to be set in the user's shell configuration. This
can be skipped if NO_CMAKE_ENVIRONMENT_PATH is passed.
<package>_DIR
CMAKE_PREFIX_PATH
CMAKE_FRAMEWORK_PATH
CMAKE_APPBUNDLE_PATH
3. Search paths specified by the HINTS option. These should be paths
computed by system introspection, such as a hint provided by the
location of another item already found. Hard-coded guesses should be
specified with the PATHS option.
4. Search the standard system environment variables. This can be
skipped if NO_SYSTEM_ENVIRONMENT_PATH is passed. Path entries ending
in "/bin" or "/sbin" are automatically converted to their parent
directories.
PATH
5. Search project build trees recently configured in a CMake GUI.
This can be skipped if NO_CMAKE_BUILDS_PATH is passed. It is intended
for the case when a user is building multiple dependent projects one
after another.
6. Search paths stored in the CMake user package registry. This can
be skipped if NO_CMAKE_PACKAGE_REGISTRY is passed. On Windows a
<package> may appear under registry key
HKEY_CURRENT_USER\Software\Kitware\CMake\Packages\<package>
as a REG_SZ value, with arbitrary name, that specifies the directory
containing the package configuration file. On UNIX platforms a
<package> may appear under the directory
~/.cmake/packages/<package>
as a file, with arbitrary name, whose content specifies the directory
containing the package configuration file. See the export(PACKAGE)
command to create user package registry entries for project build
trees.
7. Search cmake variables defined in the Platform files for the
current system. This can be skipped if NO_CMAKE_SYSTEM_PATH is
passed.
CMAKE_SYSTEM_PREFIX_PATH
CMAKE_SYSTEM_FRAMEWORK_PATH
CMAKE_SYSTEM_APPBUNDLE_PATH
8. Search paths stored in the CMake system package registry. This
can be skipped if NO_CMAKE_SYSTEM_PACKAGE_REGISTRY is passed. On
Windows a <package> may appear under registry key
HKEY_LOCAL_MACHINE\Software\Kitware\CMake\Packages\<package>
as a REG_SZ value, with arbitrary name, that specifies the directory
containing the package configuration file. There is no system package
registry on non-Windows platforms.
9. Search paths specified by the PATHS option. These are typically
hard-coded guesses.
On Darwin or systems supporting OS X Frameworks, the cmake variable
CMAKE_FIND_FRAMEWORK can be set to empty or one of the following:
"FIRST" - Try to find frameworks before standard
libraries or headers. This is the default on Darwin.
"LAST" - Try to find frameworks after standard
libraries or headers.
"ONLY" - Only try to find frameworks.
"NEVER" - Never try to find frameworks.
On Darwin or systems supporting OS X Application Bundles, the cmake
variable CMAKE_FIND_APPBUNDLE can be set to empty or one of the
following:
"FIRST" - Try to find application bundles before standard
programs. This is the default on Darwin.
"LAST" - Try to find application bundles after standard
programs.
"ONLY" - Only try to find application bundles.
"NEVER" - Never try to find application bundles.
The CMake variable CMAKE_FIND_ROOT_PATH specifies one or more
directories to be prepended to all other search directories. This
effectively "re-roots" the entire search under given locations. By
default it is empty. It is especially useful when cross-compiling to
point to the root directory of the target environment and CMake will
search there too. By default at first the directories listed in
CMAKE_FIND_ROOT_PATH and then the non-rooted directories will be
searched. The default behavior can be adjusted by setting
CMAKE_FIND_ROOT_PATH_MODE_PACKAGE. This behavior can be manually
overridden on a per-call basis. By using CMAKE_FIND_ROOT_PATH_BOTH
the search order will be as described above. If
NO_CMAKE_FIND_ROOT_PATH is used then CMAKE_FIND_ROOT_PATH will not be
used. If ONLY_CMAKE_FIND_ROOT_PATH is used then only the re-rooted
directories will be searched.
The default search order is designed to be most-specific to
least-specific for common use cases. Projects may override the order
by simply calling the command multiple times and using the NO_*
options:
find_package(<package> PATHS paths... NO_DEFAULT_PATH)
find_package(<package>)
Once one of the calls succeeds the result variable will be set and
stored in the cache so that no call will search again.
Every non-REQUIRED find_package() call can be disabled by setting the
variable CMAKE_DISABLE_FIND_PACKAGE_<package> to TRUE. See the
documentation for the CMAKE_DISABLE_FIND_PACKAGE_<package> variable
for more information.
See the cmake_policy() command documentation for discussion of the
NO_POLICY_SCOPE option.
find_path
Find the directory containing a file.
find_path(<VAR> name1 [path1 path2 ...])
This is the short-hand signature for the command that is sufficient in
many cases. It is the same as find_path(<VAR> name1 [PATHS path1
path2 ...])
find_path(
<VAR>
name | NAMES name1 [name2 ...]
[HINTS path1 [path2 ... ENV var]]
[PATHS path1 [path2 ... ENV var]]
[PATH_SUFFIXES suffix1 [suffix2 ...]]
[DOC "cache documentation string"]
[NO_DEFAULT_PATH]
[NO_CMAKE_ENVIRONMENT_PATH]
[NO_CMAKE_PATH]
[NO_SYSTEM_ENVIRONMENT_PATH]
[NO_CMAKE_SYSTEM_PATH]
[CMAKE_FIND_ROOT_PATH_BOTH |
ONLY_CMAKE_FIND_ROOT_PATH |
NO_CMAKE_FIND_ROOT_PATH]
)
This command is used to find a directory containing the named file. A
cache entry named by <VAR> is created to store the result of this
command. If the file in a directory is found the result is stored in
the variable and the search will not be repeated unless the variable
is cleared. If nothing is found, the result will be <VAR>-NOTFOUND,
and the search will be attempted again the next time find_path is
invoked with the same variable. The name of the file in a directory
that is searched for is specified by the names listed after the NAMES
argument. Additional search locations can be specified after the
PATHS argument. If ENV var is found in the HINTS or PATHS section the
environment variable var will be read and converted from a system
environment variable to a cmake style list of paths. For example ENV
PATH would be a way to list the system path variable. The argument
after DOC will be used for the documentation string in the cache.
PATH_SUFFIXES specifies additional subdirectories to check below each
search path.
If NO_DEFAULT_PATH is specified, then no additional paths are added to
the search. If NO_DEFAULT_PATH is not specified, the search process
is as follows:
1. Search paths specified in cmake-specific cache variables. These
are intended to be used on the command line with a -DVAR=value. This
can be skipped if NO_CMAKE_PATH is passed.
<prefix>/include for each <prefix> in CMAKE_PREFIX_PATH
CMAKE_INCLUDE_PATH
CMAKE_FRAMEWORK_PATH
2. Search paths specified in cmake-specific environment variables.
These are intended to be set in the user's shell configuration. This
can be skipped if NO_CMAKE_ENVIRONMENT_PATH is passed.
<prefix>/include for each <prefix> in CMAKE_PREFIX_PATH
CMAKE_INCLUDE_PATH
CMAKE_FRAMEWORK_PATH
3. Search the paths specified by the HINTS option. These should be
paths computed by system introspection, such as a hint provided by the
location of another item already found. Hard-coded guesses should be
specified with the PATHS option.
4. Search the standard system environment variables. This can be
skipped if NO_SYSTEM_ENVIRONMENT_PATH is an argument.
PATH
INCLUDE
5. Search cmake variables defined in the Platform files for the
current system. This can be skipped if NO_CMAKE_SYSTEM_PATH is
passed.
<prefix>/include for each <prefix> in CMAKE_SYSTEM_PREFIX_PATH
CMAKE_SYSTEM_INCLUDE_PATH
CMAKE_SYSTEM_FRAMEWORK_PATH
6. Search the paths specified by the PATHS option or in the
short-hand version of the command. These are typically hard-coded
guesses.
On Darwin or systems supporting OS X Frameworks, the cmake variable
CMAKE_FIND_FRAMEWORK can be set to empty or one of the following:
"FIRST" - Try to find frameworks before standard
libraries or headers. This is the default on Darwin.
"LAST" - Try to find frameworks after standard
libraries or headers.
"ONLY" - Only try to find frameworks.
"NEVER" - Never try to find frameworks.
On Darwin or systems supporting OS X Application Bundles, the cmake
variable CMAKE_FIND_APPBUNDLE can be set to empty or one of the
following:
"FIRST" - Try to find application bundles before standard
programs. This is the default on Darwin.
"LAST" - Try to find application bundles after standard
programs.
"ONLY" - Only try to find application bundles.
"NEVER" - Never try to find application bundles.
The CMake variable CMAKE_FIND_ROOT_PATH specifies one or more
directories to be prepended to all other search directories. This
effectively "re-roots" the entire search under given locations. By
default it is empty. It is especially useful when cross-compiling to
point to the root directory of the target environment and CMake will
search there too. By default at first the directories listed in
CMAKE_FIND_ROOT_PATH and then the non-rooted directories will be
searched. The default behavior can be adjusted by setting
CMAKE_FIND_ROOT_PATH_MODE_INCLUDE. This behavior can be manually
overridden on a per-call basis. By using CMAKE_FIND_ROOT_PATH_BOTH
the search order will be as described above. If
NO_CMAKE_FIND_ROOT_PATH is used then CMAKE_FIND_ROOT_PATH will not be
used. If ONLY_CMAKE_FIND_ROOT_PATH is used then only the re-rooted
directories will be searched.
The default search order is designed to be most-specific to
least-specific for common use cases. Projects may override the order
by simply calling the command multiple times and using the NO_*
options:
find_path(<VAR> NAMES name PATHS paths... NO_DEFAULT_PATH)
find_path(<VAR> NAMES name)
Once one of the calls succeeds the result variable will be set and
stored in the cache so that no call will search again.
When searching for frameworks, if the file is specified as A/b.h, then
the framework search will look for A.framework/Headers/b.h. If that
is found the path will be set to the path to the framework. CMake
will convert this to the correct -F option to include the file.
find_program
Find an executable program.
find_program(<VAR> name1 [path1 path2 ...])
This is the short-hand signature for the command that is sufficient in
many cases. It is the same as find_program(<VAR> name1 [PATHS path1
path2 ...])
find_program(
<VAR>
name | NAMES name1 [name2 ...]
[HINTS path1 [path2 ... ENV var]]
[PATHS path1 [path2 ... ENV var]]
[PATH_SUFFIXES suffix1 [suffix2 ...]]
[DOC "cache documentation string"]
[NO_DEFAULT_PATH]
[NO_CMAKE_ENVIRONMENT_PATH]
[NO_CMAKE_PATH]
[NO_SYSTEM_ENVIRONMENT_PATH]
[NO_CMAKE_SYSTEM_PATH]
[CMAKE_FIND_ROOT_PATH_BOTH |
ONLY_CMAKE_FIND_ROOT_PATH |
NO_CMAKE_FIND_ROOT_PATH]
)
This command is used to find a program. A cache entry named by <VAR>
is created to store the result of this command. If the program is
found the result is stored in the variable and the search will not be
repeated unless the variable is cleared. If nothing is found, the
result will be <VAR>-NOTFOUND, and the search will be attempted again
the next time find_program is invoked with the same variable. The
name of the program that is searched for is specified by the names
listed after the NAMES argument. Additional search locations can be
specified after the PATHS argument. If ENV var is found in the HINTS
or PATHS section the environment variable var will be read and
converted from a system environment variable to a cmake style list of
paths. For example ENV PATH would be a way to list the system path
variable. The argument after DOC will be used for the documentation
string in the cache. PATH_SUFFIXES specifies additional
subdirectories to check below each search path.
If NO_DEFAULT_PATH is specified, then no additional paths are added to
the search. If NO_DEFAULT_PATH is not specified, the search process
is as follows:
1. Search paths specified in cmake-specific cache variables. These
are intended to be used on the command line with a -DVAR=value. This
can be skipped if NO_CMAKE_PATH is passed.
<prefix>/[s]bin for each <prefix> in CMAKE_PREFIX_PATH
CMAKE_PROGRAM_PATH
CMAKE_APPBUNDLE_PATH
2. Search paths specified in cmake-specific environment variables.
These are intended to be set in the user's shell configuration. This
can be skipped if NO_CMAKE_ENVIRONMENT_PATH is passed.
<prefix>/[s]bin for each <prefix> in CMAKE_PREFIX_PATH
CMAKE_PROGRAM_PATH
CMAKE_APPBUNDLE_PATH
3. Search the paths specified by the HINTS option. These should be
paths computed by system introspection, such as a hint provided by the
location of another item already found. Hard-coded guesses should be
specified with the PATHS option.
4. Search the standard system environment variables. This can be
skipped if NO_SYSTEM_ENVIRONMENT_PATH is an argument.
PATH
5. Search cmake variables defined in the Platform files for the
current system. This can be skipped if NO_CMAKE_SYSTEM_PATH is
passed.
<prefix>/[s]bin for each <prefix> in CMAKE_SYSTEM_PREFIX_PATH
CMAKE_SYSTEM_PROGRAM_PATH
CMAKE_SYSTEM_APPBUNDLE_PATH
6. Search the paths specified by the PATHS option or in the
short-hand version of the command. These are typically hard-coded
guesses.
On Darwin or systems supporting OS X Frameworks, the cmake variable
CMAKE_FIND_FRAMEWORK can be set to empty or one of the following:
"FIRST" - Try to find frameworks before standard
libraries or headers. This is the default on Darwin.
"LAST" - Try to find frameworks after standard
libraries or headers.
"ONLY" - Only try to find frameworks.
"NEVER" - Never try to find frameworks.
On Darwin or systems supporting OS X Application Bundles, the cmake
variable CMAKE_FIND_APPBUNDLE can be set to empty or one of the
following:
"FIRST" - Try to find application bundles before standard
programs. This is the default on Darwin.
"LAST" - Try to find application bundles after standard
programs.
"ONLY" - Only try to find application bundles.
"NEVER" - Never try to find application bundles.
The CMake variable CMAKE_FIND_ROOT_PATH specifies one or more
directories to be prepended to all other search directories. This
effectively "re-roots" the entire search under given locations. By
default it is empty. It is especially useful when cross-compiling to
point to the root directory of the target environment and CMake will
search there too. By default at first the directories listed in
CMAKE_FIND_ROOT_PATH and then the non-rooted directories will be
searched. The default behavior can be adjusted by setting
CMAKE_FIND_ROOT_PATH_MODE_PROGRAM. This behavior can be manually
overridden on a per-call basis. By using CMAKE_FIND_ROOT_PATH_BOTH
the search order will be as described above. If
NO_CMAKE_FIND_ROOT_PATH is used then CMAKE_FIND_ROOT_PATH will not be
used. If ONLY_CMAKE_FIND_ROOT_PATH is used then only the re-rooted
directories will be searched.
The default search order is designed to be most-specific to
least-specific for common use cases. Projects may override the order
by simply calling the command multiple times and using the NO_*
options:
find_program(<VAR> NAMES name PATHS paths... NO_DEFAULT_PATH)
find_program(<VAR> NAMES name)
Once one of the calls succeeds the result variable will be set and
stored in the cache so that no call will search again.
foreach
Evaluate a group of commands for each value in a list.
foreach(loop_var arg1 arg2 ...)
COMMAND1(ARGS ...)
COMMAND2(ARGS ...)
...
endforeach(loop_var)
All commands between foreach and the matching endforeach are recorded
without being invoked. Once the endforeach is evaluated, the recorded
list of commands is invoked once for each argument listed in the
original foreach command. Before each iteration of the loop
"${loop_var}" will be set as a variable with the current value in the
list.
foreach(loop_var RANGE total)
foreach(loop_var RANGE start stop [step])
Foreach can also iterate over a generated range of numbers. There are
three types of this iteration:
* When specifying single number, the range will have elements 0 to
"total".
* When specifying two numbers, the range will have elements from the
first number to the second number.
* The third optional number is the increment used to iterate from the
first number to the second number.
foreach(loop_var IN [LISTS [list1 [...]]]
[ITEMS [item1 [...]]])
Iterates over a precise list of items. The LISTS option names
list-valued variables to be traversed, including empty elements (an
empty string is a zero-length list). The ITEMS option ends argument
parsing and includes all arguments following it in the iteration.
function
Start recording a function for later invocation as a command.
function(<name> [arg1 [arg2 [arg3 ...]]])
COMMAND1(ARGS ...)
COMMAND2(ARGS ...)
...
endfunction(<name>)
Define a function named <name> that takes arguments named arg1 arg2
arg3 (...). Commands listed after function, but before the matching
endfunction, are not invoked until the function is invoked. When it
is invoked, the commands recorded in the function are first modified
by replacing formal parameters (${arg1}) with the arguments passed,
and then invoked as normal commands. In addition to referencing the
formal parameters you can reference the variable ARGC which will be
set to the number of arguments passed into the function as well as
ARGV0 ARGV1 ARGV2 ... which will have the actual values of the
arguments passed in. This facilitates creating functions with
optional arguments. Additionally ARGV holds the list of all arguments
given to the function and ARGN holds the list of argument past the
last expected argument.
See the cmake_policy() command documentation for the behavior of
policies inside functions.
get_cmake_property
Get a property of the CMake instance.
get_cmake_property(VAR property)
Get a property from the CMake instance. The value of the property is
stored in the variable VAR. If the property is not found, VAR will be
set to "NOTFOUND". Some supported properties include: VARIABLES,
CACHE_VARIABLES, COMMANDS, MACROS, and COMPONENTS.
See also the more general get_property() command.
get_directory_property
Get a property of DIRECTORY scope.
get_directory_property(<variable> [DIRECTORY <dir>] <prop-name>)
Store a property of directory scope in the named variable. If the
property is not defined the empty-string is returned. The DIRECTORY
argument specifies another directory from which to retrieve the
property value. The specified directory must have already been
traversed by CMake.
get_directory_property(<variable> [DIRECTORY <dir>]
DEFINITION <var-name>)
Get a variable definition from a directory. This form is useful to
get a variable definition from another directory.
See also the more general get_property() command.
get_filename_component
Get a specific component of a full filename.
get_filename_component(<VAR> FileName
PATH|ABSOLUTE|NAME|EXT|NAME_WE|REALPATH
[CACHE])
Set <VAR> to be the path (PATH), file name (NAME), file extension
(EXT), file name without extension (NAME_WE) of FileName, the full
path (ABSOLUTE), or the full path with all symlinks resolved
(REALPATH). Note that the path is converted to Unix slashes format
and has no trailing slashes. The longest file extension is always
considered. If the optional CACHE argument is specified, the result
variable is added to the cache.
get_filename_component(<VAR> FileName
PROGRAM [PROGRAM_ARGS <ARG_VAR>]
[CACHE])
The program in FileName will be found in the system search path or
left as a full path. If PROGRAM_ARGS is present with PROGRAM, then
any command-line arguments present in the FileName string are split
from the program name and stored in <ARG_VAR>. This is used to
separate a program name from its arguments in a command line string.
get_property
Get a property.
get_property(<variable>
<GLOBAL |
DIRECTORY [dir] |
TARGET <target> |
SOURCE <source> |
TEST <test> |
CACHE <entry> |
VARIABLE>
PROPERTY <name>
[SET | DEFINED | BRIEF_DOCS | FULL_DOCS])
Get one property from one object in a scope. The first argument
specifies the variable in which to store the result. The second
argument determines the scope from which to get the property. It must
be one of the following:
GLOBAL scope is unique and does not accept a name.
DIRECTORY scope defaults to the current directory but another
directory (already processed by CMake) may be named by full or
relative path.
TARGET scope must name one existing target.
SOURCE scope must name one source file.
TEST scope must name one existing test.
CACHE scope must name one cache entry.
VARIABLE scope is unique and does not accept a name.
The required PROPERTY option is immediately followed by the name of
the property to get. If the property is not set an empty value is
returned. If the SET option is given the variable is set to a boolean
value indicating whether the property has been set. If the DEFINED
option is given the variable is set to a boolean value indicating
whether the property has been defined such as with define_property.
If BRIEF_DOCS or FULL_DOCS is given then the variable is set to a
string containing documentation for the requested property. If
documentation is requested for a property that has not been defined
NOTFOUND is returned.
if
Conditionally execute a group of commands.
if(expression)
# then section.
COMMAND1(ARGS ...)
COMMAND2(ARGS ...)
...
elseif(expression2)
# elseif section.
COMMAND1(ARGS ...)
COMMAND2(ARGS ...)
...
else(expression)
# else section.
COMMAND1(ARGS ...)
COMMAND2(ARGS ...)
...
endif(expression)
Evaluates the given expression. If the result is true, the commands
in the THEN section are invoked. Otherwise, the commands in the else
section are invoked. The elseif and else sections are optional. You
may have multiple elseif clauses. Note that the expression in the
else and endif clause is optional. Long expressions can be used and
there is a traditional order of precedence. Parenthetical expressions
are evaluated first followed by unary operators such as EXISTS,
COMMAND, and DEFINED. Then any EQUAL, LESS, GREATER, STRLESS,
STRGREATER, STREQUAL, MATCHES will be evaluated. Then NOT operators
and finally AND, OR operators will be evaluated. Possible expressions
are:
if(<constant>)
True if the constant is 1, ON, YES, TRUE, Y, or a non-zero number.
False if the constant is 0, OFF, NO, FALSE, N, IGNORE, "", or ends in
the suffix '-NOTFOUND'. Named boolean constants are case-insensitive.
If the argument is not one of these constants, it is treated as a
variable:
if(<variable>)
True if the variable is defined to a value that is not a false
constant. False otherwise.
if(NOT <expression>)
True if the expression is not true.
if(<expr1> AND <expr2>)
True if both expressions would be considered true individually.
if(<expr1> OR <expr2>)
True if either expression would be considered true individually.
if(COMMAND command-name)
True if the given name is a command, macro or function that can be
invoked.
if(POLICY policy-id)
True if the given name is an existing policy (of the form CMP<NNNN>).
if(TARGET target-name)
True if the given name is an existing target, built or imported.
if(EXISTS file-name)
if(EXISTS directory-name)
True if the named file or directory exists. Behavior is well-defined
only for full paths.
if(file1 IS_NEWER_THAN file2)
True if file1 is newer than file2 or if one of the two files doesn't
exist. Behavior is well-defined only for full paths.
if(IS_DIRECTORY directory-name)
True if the given name is a directory. Behavior is well-defined only
for full paths.
if(IS_SYMLINK file-name)
True if the given name is a symbolic link. Behavior is well-defined
only for full paths.
if(IS_ABSOLUTE path)
True if the given path is an absolute path.
if(<variable|string> MATCHES regex)
True if the given string or variable's value matches the given regular
expression.
if(<variable|string> LESS <variable|string>)
if(<variable|string> GREATER <variable|string>)
if(<variable|string> EQUAL <variable|string>)
True if the given string or variable's value is a valid number and the
inequality or equality is true.
if(<variable|string> STRLESS <variable|string>)
if(<variable|string> STRGREATER <variable|string>)
if(<variable|string> STREQUAL <variable|string>)
True if the given string or variable's value is lexicographically less
(or greater, or equal) than the string or variable on the right.
if(<variable|string> VERSION_LESS <variable|string>)
if(<variable|string> VERSION_EQUAL <variable|string>)
if(<variable|string> VERSION_GREATER <variable|string>)
Component-wise integer version number comparison (version format is
major[.minor[.patch[.tweak]]]).
if(DEFINED <variable>)
True if the given variable is defined. It does not matter if the
variable is true or false just if it has been set.
if((expression) AND (expression OR (expression)))
The expressions inside the parenthesis are evaluated first and then
the remaining expression is evaluated as in the previous examples.
Where there are nested parenthesis the innermost are evaluated as part
of evaluating the expression that contains them.
The if command was written very early in CMake's history, predating
the ${} variable evaluation syntax, and for convenience evaluates
variables named by its arguments as shown in the above signatures.
Note that normal variable evaluation with ${} applies before the if
command even receives the arguments. Therefore code like
set(var1 OFF)
set(var2 "var1")
if(${var2})
appears to the if command as
if(var1)
and is evaluated according to the if(<variable>) case documented
above. The result is OFF which is false. However, if we remove the
${} from the example then the command sees
if(var2)
which is true because var2 is defined to "var1" which is not a false
constant.
Automatic evaluation applies in the other cases whenever the
above-documented signature accepts <variable|string>:
1) The left hand argument to MATCHES is first checked to see if it is
a defined variable, if so the variable's value is used, otherwise the
original value is used.
2) If the left hand argument to MATCHES is missing it returns false
without error
3) Both left and right hand arguments to LESS GREATER EQUAL are
independently tested to see if they are defined variables, if so their
defined values are used otherwise the original value is used.
4) Both left and right hand arguments to STRLESS STREQUAL STRGREATER
are independently tested to see if they are defined variables, if so
their defined values are used otherwise the original value is used.
5) Both left and right hand argumemnts to VERSION_LESS VERSION_EQUAL
VERSION_GREATER are independently tested to see if they are defined
variables, if so their defined values are used otherwise the original
value is used.
6) The right hand argument to NOT is tested to see if it is a boolean
constant, if so the value is used, otherwise it is assumed to be a
variable and it is dereferenced.
7) The left and right hand arguments to AND OR are independently
tested to see if they are boolean constants, if so they are used as
such, otherwise they are assumed to be variables and are dereferenced.
include
Read CMake listfile code from the given file.
include(<file|module> [OPTIONAL] [RESULT_VARIABLE <VAR>]
[NO_POLICY_SCOPE])
Reads CMake listfile code from the given file. Commands in the file
are processed immediately as if they were written in place of the
include command. If OPTIONAL is present, then no error is raised if
the file does not exist. If RESULT_VARIABLE is given the variable
will be set to the full filename which has been included or NOTFOUND
if it failed.
If a module is specified instead of a file, the file with name
<modulename>.cmake is searched first in CMAKE_MODULE_PATH, then in the
CMake module directory. There is one exception to this: if the file
which calls include() is located itself in the CMake module directory,
then first the CMake module directory is searched and
CMAKE_MODULE_PATH afterwards. See also policy CMP0017.
See the cmake_policy() command documentation for discussion of the
NO_POLICY_SCOPE option.
list
List operations.
list(LENGTH <list> <output variable>)
list(GET <list> <element index> [<element index> ...]
<output variable>)
list(APPEND <list> <element> [<element> ...])
list(FIND <list> <value> <output variable>)
list(INSERT <list> <element_index> <element> [<element> ...])
list(REMOVE_ITEM <list> <value> [<value> ...])
list(REMOVE_AT <list> <index> [<index> ...])
list(REMOVE_DUPLICATES <list>)
list(REVERSE <list>)
list(SORT <list>)
LENGTH will return a given list's length.
GET will return list of elements specified by indices from the list.
APPEND will append elements to the list.
FIND will return the index of the element specified in the list or -1
if it wasn't found.
INSERT will insert elements to the list to the specified location.
REMOVE_AT and REMOVE_ITEM will remove items from the list. The
difference is that REMOVE_ITEM will remove the given items, while
REMOVE_AT will remove the items at the given indices.
REMOVE_DUPLICATES will remove duplicated items in the list.
REVERSE reverses the contents of the list in-place.
SORT sorts the list in-place alphabetically.
The list subcommands APPEND, INSERT, REMOVE_AT, REMOVE_ITEM,
REMOVE_DUPLICATES, REVERSE and SORT may create new values for the list
within the current CMake variable scope. Similar to the SET command,
the LIST command creates new variable values in the current scope,
even if the list itself is actually defined in a parent scope. To
propagate the results of these operations upwards, use SET with
PARENT_SCOPE, SET with CACHE INTERNAL, or some other means of value
propagation.
NOTES: A list in cmake is a ; separated group of strings. To create a
list the set command can be used. For example, set(var a b c d e)
creates a list with a;b;c;d;e, and set(var "a b c d e") creates a
string or a list with one item in it.
When specifying index values, if <element index> is 0 or greater, it
is indexed from the beginning of the list, with 0 representing the
first list element. If <element index> is -1 or lesser, it is indexed
from the end of the list, with -1 representing the last list element.
Be careful when counting with negative indices: they do not start from
0. -0 is equivalent to 0, the first list element.
macro
Start recording a macro for later invocation as a command.
macro(<name> [arg1 [arg2 [arg3 ...]]])
COMMAND1(ARGS ...)
COMMAND2(ARGS ...)
...
endmacro(<name>)
Define a macro named <name> that takes arguments named arg1 arg2 arg3
(...). Commands listed after macro, but before the matching endmacro,
are not invoked until the macro is invoked. When it is invoked, the
commands recorded in the macro are first modified by replacing formal
parameters (${arg1}) with the arguments passed, and then invoked as
normal commands. In addition to referencing the formal parameters you
can reference the values ${ARGC} which will be set to the number of
arguments passed into the function as well as ${ARGV0} ${ARGV1}
${ARGV2} ... which will have the actual values of the arguments
passed in. This facilitates creating macros with optional arguments.
Additionally ${ARGV} holds the list of all arguments given to the
macro and ${ARGN} holds the list of argument past the last expected
argument. Note that the parameters to a macro and values such as ARGN
are not variables in the usual CMake sense. They are string
replacements much like the c preprocessor would do with a macro. If
you want true CMake variables you should look at the function command.
See the cmake_policy() command documentation for the behavior of
policies inside macros.
mark_as_advanced
Mark cmake cached variables as advanced.
mark_as_advanced([CLEAR|FORCE] VAR VAR2 VAR...)
Mark the named cached variables as advanced. An advanced variable
will not be displayed in any of the cmake GUIs unless the show
advanced option is on. If CLEAR is the first argument advanced
variables are changed back to unadvanced. If FORCE is the first
argument, then the variable is made advanced. If neither FORCE nor
CLEAR is specified, new values will be marked as advanced, but if the
variable already has an advanced/non-advanced state, it will not be
changed.
It does nothing in script mode.
math
Mathematical expressions.
math(EXPR <output variable> <math expression>)
EXPR evaluates mathematical expression and return result in the output
variable. Example mathematical expression is '5 * ( 10 + 13 )'.
Supported operators are + - * / % | & ^ ~ << >> * / %. They have the
same meaning as they do in c code.
message
Display a message to the user.
message([STATUS|WARNING|AUTHOR_WARNING|FATAL_ERROR|SEND_ERROR]
"message to display" ...)
The optional keyword determines the type of message:
(none) = Important information
STATUS = Incidental information
WARNING = CMake Warning, continue processing
AUTHOR_WARNING = CMake Warning (dev), continue processing
SEND_ERROR = CMake Error, continue but skip generation
FATAL_ERROR = CMake Error, stop all processing
The CMake command-line tool displays STATUS messages on stdout and all
other message types on stderr. The CMake GUI displays all messages in
its log area. The interactive dialogs (ccmake and CMakeSetup) show
STATUS messages one at a time on a status line and other messages in
interactive pop-up boxes.
CMake Warning and Error message text displays using a simple markup
language. Non-indented text is formatted in line-wrapped paragraphs
delimited by newlines. Indented text is considered pre-formatted.
option
Provides an option that the user can optionally select.
option(<option_variable> "help string describing option"
[initial value])
Provide an option for the user to select as ON or OFF. If no initial
value is provided, OFF is used.
If you have options that depend on the values of other options, see
the module help for CMakeDependentOption.
return
Return from a file, directory or function.
return()
Returns from a file, directory or function. When this command is
encountered in an included file (via include() or find_package()), it
causes processing of the current file to stop and control is returned
to the including file. If it is encountered in a file which is not
included by another file, e.g. a CMakeLists.txt, control is returned
to the parent directory if there is one. If return is called in a
function, control is returned to the caller of the function. Note
that a macro is not a function and does not handle return like a
function does.
separate_arguments
Parse space-separated arguments into a semicolon-separated list.
separate_arguments(<var> <UNIX|WINDOWS>_COMMAND "<args>")
Parses a unix- or windows-style command-line string "<args>" and
stores a semicolon-separated list of the arguments in <var>. The
entire command line must be given in one "<args>" argument.
The UNIX_COMMAND mode separates arguments by unquoted whitespace. It
recognizes both single-quote and double-quote pairs. A backslash
escapes the next literal character (\" is "); there are no special
escapes (\n is just n).
The WINDOWS_COMMAND mode parses a windows command-line using the same
syntax the runtime library uses to construct argv at startup. It
separates arguments by whitespace that is not double-quoted.
Backslashes are literal unless they precede double-quotes. See the
MSDN article "Parsing C Command-Line Arguments" for details.
separate_arguments(VARIABLE)
Convert the value of VARIABLE to a semi-colon separated list. All
spaces are replaced with ';'. This helps with generating command
lines.
set
Set a CMAKE variable to a given value.
set(<variable> <value>
[[CACHE <type> <docstring> [FORCE]] | PARENT_SCOPE])
Within CMake sets <variable> to the value <value>. <value> is
expanded before <variable> is set to it. If CACHE is present, then
the <variable> is put in the cache. <type> and <docstring> are then
required. <type> is used by the CMake GUI to choose a widget with
which the user sets a value. The value for <type> may be one of
FILEPATH = File chooser dialog.
PATH = Directory chooser dialog.
STRING = Arbitrary string.
BOOL = Boolean ON/OFF checkbox.
INTERNAL = No GUI entry (used for persistent variables).
If <type> is INTERNAL, then the <value> is always written into the
cache, replacing any values existing in the cache. If it is not a
cache variable, then this always writes into the current makefile.
The FORCE option will overwrite the cache value removing any changes
by the user.
If PARENT_SCOPE is present, the variable will be set in the scope
above the current scope. Each new directory or function creates a new
scope. This command will set the value of a variable into the parent
directory or calling function (whichever is applicable to the case at
hand).
If <value> is not specified then the variable is removed instead of
set. See also: the unset() command.
set(<variable> <value1> ... <valueN>)
In this case <variable> is set to a semicolon separated list of
values.
<variable> can be an environment variable such as:
set( ENV{PATH} /home/martink )
in which case the environment variable will be set.
set_directory_properties
Set a property of the directory.
set_directory_properties(PROPERTIES prop1 value1 prop2 value2)
Set a property for the current directory and subdirectories. If the
property is not found, CMake will report an error. The properties
include: INCLUDE_DIRECTORIES, LINK_DIRECTORIES,
INCLUDE_REGULAR_EXPRESSION, and ADDITIONAL_MAKE_CLEAN_FILES.
ADDITIONAL_MAKE_CLEAN_FILES is a list of files that will be cleaned as
a part of "make clean" stage.
set_property
Set a named property in a given scope.
set_property(<GLOBAL |
DIRECTORY [dir] |
TARGET [target1 [target2 ...]] |
SOURCE [src1 [src2 ...]] |
TEST [test1 [test2 ...]] |
CACHE [entry1 [entry2 ...]]>
[APPEND] [APPEND_STRING]
PROPERTY <name> [value1 [value2 ...]])
Set one property on zero or more objects of a scope. The first
argument determines the scope in which the property is set. It must
be one of the following:
GLOBAL scope is unique and does not accept a name.
DIRECTORY scope defaults to the current directory but another
directory (already processed by CMake) may be named by full or
relative path.
TARGET scope may name zero or more existing targets.
SOURCE scope may name zero or more source files. Note that source
file properties are visible only to targets added in the same
directory (CMakeLists.txt).
TEST scope may name zero or more existing tests.
CACHE scope must name zero or more cache existing entries.
The required PROPERTY option is immediately followed by the name of
the property to set. Remaining arguments are used to compose the
property value in the form of a semicolon-separated list. If the
APPEND option is given the list is appended to any existing property
value.If the APPEND_STRING option is given the string is append to any
existing property value as string, i.e. it results in a longer string
and not a list of strings.
site_name
Set the given variable to the name of the computer.
site_name(variable)
string
String operations.
string(REGEX MATCH <regular_expression>
<output variable> <input> [<input>...])
string(REGEX MATCHALL <regular_expression>
<output variable> <input> [<input>...])
string(REGEX REPLACE <regular_expression>
<replace_expression> <output variable>
<input> [<input>...])
string(REPLACE <match_string>
<replace_string> <output variable>
<input> [<input>...])
string(<MD5|SHA1|SHA224|SHA256|SHA384|SHA512>
<output variable> <input>)
string(COMPARE EQUAL <string1> <string2> <output variable>)
string(COMPARE NOTEQUAL <string1> <string2> <output variable>)
string(COMPARE LESS <string1> <string2> <output variable>)
string(COMPARE GREATER <string1> <string2> <output variable>)
string(ASCII <number> [<number> ...] <output variable>)
string(CONFIGURE <string1> <output variable>
[@ONLY] [ESCAPE_QUOTES])
string(TOUPPER <string1> <output variable>)
string(TOLOWER <string1> <output variable>)
string(LENGTH <string> <output variable>)
string(SUBSTRING <string> <begin> <length> <output variable>)
string(STRIP <string> <output variable>)
string(RANDOM [LENGTH <length>] [ALPHABET <alphabet>]
[RANDOM_SEED <seed>] <output variable>)
string(FIND <string> <substring> <output variable> [REVERSE])
REGEX MATCH will match the regular expression once and store the match
in the output variable.
REGEX MATCHALL will match the regular expression as many times as
possible and store the matches in the output variable as a list.
REGEX REPLACE will match the regular expression as many times as
possible and substitute the replacement expression for the match in
the output. The replace expression may refer to paren-delimited
subexpressions of the match using \1, \2, ..., \9. Note that two
backslashes (\\1) are required in CMake code to get a backslash
through argument parsing.
REPLACE will replace all occurrences of match_string in the input with
replace_string and store the result in the output.
MD5, SHA1, SHA224, SHA256, SHA384, and SHA512 will compute a
cryptographic hash of the input string.
COMPARE EQUAL/NOTEQUAL/LESS/GREATER will compare the strings and store
true or false in the output variable.
ASCII will convert all numbers into corresponding ASCII characters.
CONFIGURE will transform a string like CONFIGURE_FILE transforms a
file.
TOUPPER/TOLOWER will convert string to upper/lower characters.
LENGTH will return a given string's length.
SUBSTRING will return a substring of a given string. If length is -1
the remainder of the string starting at begin will be returned.
STRIP will return a substring of a given string with leading and
trailing spaces removed.
RANDOM will return a random string of given length consisting of
characters from the given alphabet. Default length is 5 characters
and default alphabet is all numbers and upper and lower case letters.
If an integer RANDOM_SEED is given, its value will be used to seed the
random number generator.
FIND will return the position where the given substring was found in
the supplied string. If the REVERSE flag was used, the command will
search for the position of the last occurrence of the specified
substring.
The following characters have special meaning in regular expressions:
^ Matches at beginning of a line
$ Matches at end of a line
. Matches any single character
[ ] Matches any character(s) inside the brackets
[^ ] Matches any character(s) not inside the brackets
- Matches any character in range on either side of a dash
* Matches preceding pattern zero or more times
+ Matches preceding pattern one or more times
? Matches preceding pattern zero or once only
| Matches a pattern on either side of the |
() Saves a matched subexpression, which can be referenced
in the REGEX REPLACE operation. Additionally it is saved
by all regular expression-related commands, including
e.g. if( MATCHES ), in the variables CMAKE_MATCH_(0..9).
unset
Unset a variable, cache variable, or environment variable.
unset(<variable> [CACHE])
Removes the specified variable causing it to become undefined. If
CACHE is present then the variable is removed from the cache instead
of the current scope.
<variable> can be an environment variable such as:
unset(ENV{LD_LIBRARY_PATH})
in which case the variable will be removed from the current
environment.
variable_watch
Watch the CMake variable for change.
variable_watch(<variable name> [<command to execute>])
If the specified variable changes, the message will be printed about
the variable being changed. If the command is specified, the command
will be executed. The command will receive the following arguments:
COMMAND(<variable> <access> <value> <current list file> <stack>)
while
Evaluate a group of commands while a condition is true
while(condition)
COMMAND1(ARGS ...)
COMMAND2(ARGS ...)
...
endwhile(condition)
All commands between while and the matching endwhile are recorded
without being invoked. Once the endwhile is evaluated, the recorded
list of commands is invoked as long as the condition is true. The
condition is evaluated using the same logic as the if command.
------------------------------------------------------------------------------
Compatibility Commands
CMake Compatibility Listfile Commands - Obsolete commands supported by CMake for compatibility.
This is the documentation for now obsolete listfile commands from previous
CMake versions, which are still supported for compatibility reasons. You
should instead use the newer, faster and shinier new commands. ;-)
------------------------------------------------------------------------------
Standard CMake Modules
------------------------------------------------------------------------------
Properties of Global Scope
ALLOW_DUPLICATE_CUSTOM_TARGETS
Allow duplicate custom targets to be created.
Normally CMake requires that all targets built in a project have
globally unique logical names (see policy CMP0002). This is necessary
to generate meaningful project file names in Xcode and VS IDE
generators. It also allows the target names to be referenced
unambiguously.
Makefile generators are capable of supporting duplicate custom target
names. For projects that care only about Makefile generators and do
not wish to support Xcode or VS IDE generators, one may set this
property to true to allow duplicate custom targets. The property
allows multiple add_custom_target command calls in different
directories to specify the same target name. However, setting this
property will cause non-Makefile generators to produce an error and
refuse to generate the project.
DEBUG_CONFIGURATIONS
Specify which configurations are for debugging.
The value must be a semi-colon separated list of configuration names.
Currently this property is used only by the target_link_libraries
command (see its documentation for details). Additional uses may be
defined in the future.
This property must be set at the top level of the project and before
the first target_link_libraries command invocation. If any entry in
the list does not match a valid configuration for the project the
behavior is undefined.
DISABLED_FEATURES
List of features which are disabled during the CMake run.
List of features which are disabled during the CMake run. By default
it contains the names of all packages which were not found. This is
determined using the <NAME>_FOUND variables. Packages which are
searched QUIET are not listed. A project can add its own features to
this list. This property is used by the macros in
FeatureSummary.cmake.
ENABLED_FEATURES
List of features which are enabled during the CMake run.
List of features which are enabled during the CMake run. By default
it contains the names of all packages which were found. This is
determined using the <NAME>_FOUND variables. Packages which are
searched QUIET are not listed. A project can add its own features to
this list. This property is used by the macros in
FeatureSummary.cmake.
ENABLED_LANGUAGES
Read-only property that contains the list of currently enabled
languages
Set to list of currently enabled languages.
FIND_LIBRARY_USE_LIB64_PATHS
Whether FIND_LIBRARY should automatically search lib64 directories.
FIND_LIBRARY_USE_LIB64_PATHS is a boolean specifying whether the
FIND_LIBRARY command should automatically search the lib64 variant of
directories called lib in the search path when building 64-bit
binaries.
FIND_LIBRARY_USE_OPENBSD_VERSIONING
Whether FIND_LIBRARY should find OpenBSD-style shared libraries.
This property is a boolean specifying whether the FIND_LIBRARY command
should find shared libraries with OpenBSD-style versioned extension:
".so.<major>.<minor>". The property is set to true on OpenBSD and
false on other platforms.
GLOBAL_DEPENDS_DEBUG_MODE
Enable global target dependency graph debug mode.
CMake automatically analyzes the global inter-target dependency graph
at the beginning of native build system generation. This property
causes it to display details of its analysis to stderr.
GLOBAL_DEPENDS_NO_CYCLES
Disallow global target dependency graph cycles.
CMake automatically analyzes the global inter-target dependency graph
at the beginning of native build system generation. It reports an
error if the dependency graph contains a cycle that does not consist
of all STATIC library targets. This property tells CMake to disallow
all cycles completely, even among static libraries.
IN_TRY_COMPILE
Read-only property that is true during a try-compile configuration.
True when building a project inside a TRY_COMPILE or TRY_RUN command.
PACKAGES_FOUND
List of packages which were found during the CMake run.
List of packages which were found during the CMake run. Whether a
package has been found is determined using the <NAME>_FOUND variables.
PACKAGES_NOT_FOUND
List of packages which were not found during the CMake run.
List of packages which were not found during the CMake run. Whether a
package has been found is determined using the <NAME>_FOUND variables.
PREDEFINED_TARGETS_FOLDER
Name of FOLDER for targets that are added automatically by CMake.
If not set, CMake uses "CMakePredefinedTargets" as a default value for
this property. Targets such as INSTALL, PACKAGE and RUN_TESTS will be
organized into this FOLDER. See also the documentation for the FOLDER
target property.
REPORT_UNDEFINED_PROPERTIES
If set, report any undefined properties to this file.
If this property is set to a filename then when CMake runs it will
report any properties or variables that were accessed but not defined
into the filename specified in this property.
RULE_LAUNCH_COMPILE
Specify a launcher for compile rules.
Makefile generators prefix compiler commands with the given launcher
command line. This is intended to allow launchers to intercept build
problems with high granularity. Non-Makefile generators currently
ignore this property.
RULE_LAUNCH_CUSTOM
Specify a launcher for custom rules.
Makefile generators prefix custom commands with the given launcher
command line. This is intended to allow launchers to intercept build
problems with high granularity. Non-Makefile generators currently
ignore this property.
RULE_LAUNCH_LINK
Specify a launcher for link rules.
Makefile generators prefix link and archive commands with the given
launcher command line. This is intended to allow launchers to
intercept build problems with high granularity. Non-Makefile
generators currently ignore this property.
RULE_MESSAGES
Specify whether to report a message for each make rule.
This property specifies whether Makefile generators should add a
progress message describing what each build rule does. If the
property is not set the default is ON. Set the property to OFF to
disable granular messages and report only as each target completes.
This is intended to allow scripted builds to avoid the build time cost
of detailed reports. If a CMAKE_RULE_MESSAGES cache entry exists its
value initializes the value of this property. Non-Makefile generators
currently ignore this property.
TARGET_ARCHIVES_MAY_BE_SHARED_LIBS
Set if shared libraries may be named like archives.
On AIX shared libraries may be named "lib<name>.a". This property is
set to true on such platforms.
TARGET_SUPPORTS_SHARED_LIBS
Does the target platform support shared libraries.
TARGET_SUPPORTS_SHARED_LIBS is a boolean specifying whether the target
platform supports shared libraries. Basically all current general
general purpose OS do so, the exception are usually embedded systems
with no or special OSs.
USE_FOLDERS
Use the FOLDER target property to organize targets into folders.
If not set, CMake treats this property as OFF by default. CMake
generators that are capable of organizing into a hierarchy of folders
use the values of the FOLDER target property to name those folders.
See also the documentation for the FOLDER target property.
__CMAKE_DELETE_CACHE_CHANGE_VARS_
Internal property
Used to detect compiler changes, Do not set.
------------------------------------------------------------------------------
Properties on Cache Entries
ADVANCED
True if entry should be hidden by default in GUIs.
This is a boolean value indicating whether the entry is considered
interesting only for advanced configuration. The mark_as_advanced()
command modifies this property.
HELPSTRING
Help associated with entry in GUIs.
This string summarizes the purpose of an entry to help users set it
through a CMake GUI.
MODIFIED
Internal management property. Do not set or get.
This is an internal cache entry property managed by CMake to track
interactive user modification of entries. Ignore it.
STRINGS
Enumerate possible STRING entry values for GUI selection.
For cache entries with type STRING, this enumerates a set of values.
CMake GUIs may use this to provide a selection widget instead of a
generic string entry field. This is for convenience only. CMake does
not enforce that the value matches one of those listed.
TYPE
Widget type for entry in GUIs.
Cache entry values are always strings, but CMake GUIs present widgets
to help users set values. The GUIs use this property as a hint to
determine the widget type. Valid TYPE values are:
BOOL = Boolean ON/OFF value.
PATH = Path to a directory.
FILEPATH = Path to a file.
STRING = Generic string value.
INTERNAL = Do not present in GUI at all.
STATIC = Value managed by CMake, do not change.
UNINITIALIZED = Type not yet specified.
Generally the TYPE of a cache entry should be set by the command which
creates it (set, option, find_library, etc.).
VALUE
Value of a cache entry.
This property maps to the actual value of a cache entry. Setting this
property always sets the value without checking, so use with care.
------------------------------------------------------------------------------
Properties on Directories
ADDITIONAL_MAKE_CLEAN_FILES
Additional files to clean during the make clean stage.
A list of files that will be cleaned as a part of the "make clean"
stage.
CACHE_VARIABLES
List of cache variables available in the current directory.
This read-only property specifies the list of CMake cache variables
currently defined. It is intended for debugging purposes.
CLEAN_NO_CUSTOM
Should the output of custom commands be left.
If this is true then the outputs of custom commands for this directory
will not be removed during the "make clean" stage.
COMPILE_DEFINITIONS
Preprocessor definitions for compiling a directory's sources.
The COMPILE_DEFINITIONS property may be set to a semicolon-separated
list of preprocessor definitions using the syntax VAR or VAR=value.
Function-style definitions are not supported. CMake will
automatically escape the value correctly for the native build system
(note that CMake language syntax may require escapes to specify some
values). This property may be set on a per-configuration basis using
the name COMPILE_DEFINITIONS_<CONFIG> where <CONFIG> is an upper-case
name (ex. "COMPILE_DEFINITIONS_DEBUG"). This property will be
initialized in each directory by its value in the directory's parent.
CMake will automatically drop some definitions that are not supported
by the native build tool. The VS6 IDE does not support definition
values with spaces (but NMake does).
Disclaimer: Most native build tools have poor support for escaping
certain values. CMake has work-arounds for many cases but some values
may just not be possible to pass correctly. If a value does not seem
to be escaped correctly, do not attempt to work-around the problem by
adding escape sequences to the value. Your work-around may break in a
future version of CMake that has improved escape support. Instead
consider defining the macro in a (configured) header file. Then
report the limitation. Known limitations include:
# - broken almost everywhere
; - broken in VS IDE and Borland Makefiles
, - broken in VS IDE
% - broken in some cases in NMake
& | - broken in some cases on MinGW
^ < > \" - broken in most Make tools on Windows
CMake does not reject these values outright because they do work in
some cases. Use with caution.
COMPILE_DEFINITIONS_<CONFIG>
Per-configuration preprocessor definitions in a directory.
This is the configuration-specific version of COMPILE_DEFINITIONS.
This property will be initialized in each directory by its value in
the directory's parent.
DEFINITIONS
For CMake 2.4 compatibility only. Use COMPILE_DEFINITIONS instead.
This read-only property specifies the list of flags given so far to
the add_definitions command. It is intended for debugging purposes.
Use the COMPILE_DEFINITIONS instead.
EXCLUDE_FROM_ALL
Exclude the directory from the all target of its parent.
A property on a directory that indicates if its targets are excluded
from the default build target. If it is not, then with a Makefile for
example typing make will cause the targets to be built. The same
concept applies to the default build of other generators.
IMPLICIT_DEPENDS_INCLUDE_TRANSFORM
Specify #include line transforms for dependencies in a directory.
This property specifies rules to transform macro-like #include lines
during implicit dependency scanning of C and C++ source files. The
list of rules must be semicolon-separated with each entry of the form
"A_MACRO(%)=value-with-%" (the % must be literal). During dependency
scanning occurrences of A_MACRO(...) on #include lines will be
replaced by the value given with the macro argument substituted for
'%'. For example, the entry
MYDIR(%)=<mydir/%>
will convert lines of the form
#include MYDIR(myheader.h)
to
#include <mydir/myheader.h>
allowing the dependency to be followed.
This property applies to sources in all targets within a directory.
The property value is initialized in each directory by its value in
the directory's parent.
INCLUDE_DIRECTORIES
List of preprocessor include file search directories.
This property specifies the list of directories given so far to the
include_directories command. This property exists on directories and
targets. In addition to accepting values from the include_directories
command, values may be set directly on any directory or any target
using the set_property command. A target gets its initial value for
this property from the value of the directory property. A directory
gets its initial value from its parent directory if it has one. Both
directory and target property values are adjusted by calls to the
include_directories command.
The target property values are used by the generators to set the
include paths for the compiler. See also the include_directories
command.
INCLUDE_REGULAR_EXPRESSION
Include file scanning regular expression.
This read-only property specifies the regular expression used during
dependency scanning to match include files that should be followed.
See the include_regular_expression command.
INTERPROCEDURAL_OPTIMIZATION
Enable interprocedural optimization for targets in a directory.
If set to true, enables interprocedural optimizations if they are
known to be supported by the compiler.
INTERPROCEDURAL_OPTIMIZATION_<CONFIG>
Per-configuration interprocedural optimization for a directory.
This is a per-configuration version of INTERPROCEDURAL_OPTIMIZATION.
If set, this property overrides the generic property for the named
configuration.
LINK_DIRECTORIES
List of linker search directories.
This read-only property specifies the list of directories given so far
to the link_directories command. It is intended for debugging
purposes.
LISTFILE_STACK
The current stack of listfiles being processed.
This property is mainly useful when trying to debug errors in your
CMake scripts. It returns a list of what list files are currently
being processed, in order. So if one listfile does an INCLUDE command
then that is effectively pushing the included listfile onto the stack.
MACROS
List of macro commands available in the current directory.
This read-only property specifies the list of CMake macros currently
defined. It is intended for debugging purposes. See the macro
command.
PARENT_DIRECTORY
Source directory that added current subdirectory.
This read-only property specifies the source directory that added the
current source directory as a subdirectory of the build. In the
top-level directory the value is the empty-string.
RULE_LAUNCH_COMPILE
Specify a launcher for compile rules.
See the global property of the same name for details. This overrides
the global property for a directory.
RULE_LAUNCH_CUSTOM
Specify a launcher for custom rules.
See the global property of the same name for details. This overrides
the global property for a directory.
RULE_LAUNCH_LINK
Specify a launcher for link rules.
See the global property of the same name for details. This overrides
the global property for a directory.
TEST_INCLUDE_FILE
A cmake file that will be included when ctest is run.
If you specify TEST_INCLUDE_FILE, that file will be included and
processed when ctest is run on the directory.
VARIABLES
List of variables defined in the current directory.
This read-only property specifies the list of CMake variables
currently defined. It is intended for debugging purposes.
------------------------------------------------------------------------------
Properties on Source Files
ABSTRACT
Is this source file an abstract class.
A property on a source file that indicates if the source file
represents a class that is abstract. This only makes sense for
languages that have a notion of an abstract class and it is only used
by some tools that wrap classes into other languages.
COMPILE_DEFINITIONS
Preprocessor definitions for compiling a source file.
The COMPILE_DEFINITIONS property may be set to a semicolon-separated
list of preprocessor definitions using the syntax VAR or VAR=value.
Function-style definitions are not supported. CMake will
automatically escape the value correctly for the native build system
(note that CMake language syntax may require escapes to specify some
values). This property may be set on a per-configuration basis using
the name COMPILE_DEFINITIONS_<CONFIG> where <CONFIG> is an upper-case
name (ex. "COMPILE_DEFINITIONS_DEBUG").
CMake will automatically drop some definitions that are not supported
by the native build tool. The VS6 IDE does not support definition
values with spaces (but NMake does). Xcode does not support
per-configuration definitions on source files.
Disclaimer: Most native build tools have poor support for escaping
certain values. CMake has work-arounds for many cases but some values
may just not be possible to pass correctly. If a value does not seem
to be escaped correctly, do not attempt to work-around the problem by
adding escape sequences to the value. Your work-around may break in a
future version of CMake that has improved escape support. Instead
consider defining the macro in a (configured) header file. Then
report the limitation. Known limitations include:
# - broken almost everywhere
; - broken in VS IDE and Borland Makefiles
, - broken in VS IDE
% - broken in some cases in NMake
& | - broken in some cases on MinGW
^ < > \" - broken in most Make tools on Windows
CMake does not reject these values outright because they do work in
some cases. Use with caution.
COMPILE_DEFINITIONS_<CONFIG>
Per-configuration preprocessor definitions on a source file.
This is the configuration-specific version of COMPILE_DEFINITIONS.
Note that Xcode does not support per-configuration source file flags
so this property will be ignored by the Xcode generator.
COMPILE_FLAGS
Additional flags to be added when compiling this source file.
These flags will be added to the list of compile flags when this
source file builds. Use COMPILE_DEFINITIONS to pass additional
preprocessor definitions.
EXTERNAL_OBJECT
If set to true then this is an object file.
If this property is set to true then the source file is really an
object file and should not be compiled. It will still be linked into
the target though.
Fortran_FORMAT
Set to FIXED or FREE to indicate the Fortran source layout.
This property tells CMake whether a given Fortran source file uses
fixed-format or free-format. CMake will pass the corresponding format
flag to the compiler. Consider using the target-wide Fortran_FORMAT
property if all source files in a target share the same format.
GENERATED
Is this source file generated as part of the build process.
If a source file is generated by the build process CMake will handle
it differently in terms of dependency checking etc. Otherwise having
a non-existent source file could create problems.
HEADER_FILE_ONLY
Is this source file only a header file.
A property on a source file that indicates if the source file is a
header file with no associated implementation. This is set
automatically based on the file extension and is used by CMake to
determine is certain dependency information should be computed.
KEEP_EXTENSION
Make the output file have the same extension as the source file.
If this property is set then the file extension of the output file
will be the same as that of the source file. Normally the output file
extension is computed based on the language of the source file, for
example .cxx will go to a .o extension.
LABELS
Specify a list of text labels associated with a source file.
This property has meaning only when the source file is listed in a
target whose LABELS property is also set. No other semantics are
currently specified.
LANGUAGE
What programming language is the file.
A property that can be set to indicate what programming language the
source file is. If it is not set the language is determined based on
the file extension. Typical values are CXX C etc. Setting this
property for a file means this file will be compiled. Do not set this
for header or files that should not be compiled.
LOCATION
The full path to a source file.
A read only property on a SOURCE FILE that contains the full path to
the source file.
MACOSX_PACKAGE_LOCATION
Place a source file inside a Mac OS X bundle, CFBundle, or framework.
Executable targets with the MACOSX_BUNDLE property set are built as
Mac OS X application bundles on Apple platforms. Shared library
targets with the FRAMEWORK property set are built as Mac OS X
frameworks on Apple platforms. Module library targets with the BUNDLE
property set are built as Mac OS X CFBundle bundles on Apple
platforms. Source files listed in the target with this property set
will be copied to a directory inside the bundle or framework content
folder specified by the property value. For bundles the content
folder is "<name>.app/Contents". For frameworks the content folder is
"<name>.framework/Versions/<version>". For cfbundles the content
folder is "<name>.bundle/Contents" (unless the extension is changed).
See the PUBLIC_HEADER, PRIVATE_HEADER, and RESOURCE target properties
for specifying files meant for Headers, PrivateHeaders, or Resources
directories.
OBJECT_DEPENDS
Additional files on which a compiled object file depends.
Specifies a semicolon-separated list of full-paths to files on which
any object files compiled from this source file depend. An object
file will be recompiled if any of the named files is newer than it.
This property need not be used to specify the dependency of a source
file on a generated header file that it includes. Although the
property was originally introduced for this purpose, it is no longer
necessary. If the generated header file is created by a custom
command in the same target as the source file, the automatic
dependency scanning process will recognize the dependency. If the
generated header file is created by another target, an inter-target
dependency should be created with the add_dependencies command (if one
does not already exist due to linking relationships).
OBJECT_OUTPUTS
Additional outputs for a Makefile rule.
Additional outputs created by compilation of this source file. If any
of these outputs is missing the object will be recompiled. This is
supported only on Makefile generators and will be ignored on other
generators.
SYMBOLIC
Is this just a name for a rule.
If SYMBOLIC (boolean) is set to true the build system will be informed
that the source file is not actually created on disk but instead used
as a symbolic name for a build rule.
WRAP_EXCLUDE
Exclude this source file from any code wrapping techniques.
Some packages can wrap source files into alternate languages to
provide additional functionality. For example, C++ code can be
wrapped into Java or Python etc using SWIG etc. If WRAP_EXCLUDE is
set to true (1 etc) that indicates then this source file should not be
wrapped.
------------------------------------------------------------------------------
Properties on Targets
<CONFIG>_OUTPUT_NAME
Old per-configuration target file base name.
This is a configuration-specific version of OUTPUT_NAME. Use
OUTPUT_NAME_<CONFIG> instead.
<CONFIG>_POSTFIX
Postfix to append to the target file name for configuration <CONFIG>.
When building with configuration <CONFIG> the value of this property
is appended to the target file name built on disk. For non-executable
targets, this property is initialized by the value of the variable
CMAKE_<CONFIG>_POSTFIX if it is set when a target is created. This
property is ignored on the Mac for Frameworks and App Bundles.
ARCHIVE_OUTPUT_DIRECTORY
Output directory in which to build ARCHIVE target files.
This property specifies the directory into which archive target files
should be built. Multi-configuration generators (VS, Xcode) append a
per-configuration subdirectory to the specified directory. There are
three kinds of target files that may be built: archive, library, and
runtime. Executables are always treated as runtime targets. Static
libraries are always treated as archive targets. Module libraries are
always treated as library targets. For non-DLL platforms shared
libraries are treated as library targets. For DLL platforms the DLL
part of a shared library is treated as a runtime target and the
corresponding import library is treated as an archive target. All
Windows-based systems including Cygwin are DLL platforms. This
property is initialized by the value of the variable
CMAKE_ARCHIVE_OUTPUT_DIRECTORY if it is set when a target is created.
ARCHIVE_OUTPUT_DIRECTORY_<CONFIG>
Per-configuration output directory for ARCHIVE target files.
This is a per-configuration version of ARCHIVE_OUTPUT_DIRECTORY, but
multi-configuration generators (VS, Xcode) do NOT append a
per-configuration subdirectory to the specified directory. This
property is initialized by the value of the variable
CMAKE_ARCHIVE_OUTPUT_DIRECTORY_<CONFIG> if it is set when a target is
created.
ARCHIVE_OUTPUT_NAME
Output name for ARCHIVE target files.
This property specifies the base name for archive target files. It
overrides OUTPUT_NAME and OUTPUT_NAME_<CONFIG> properties. There are
three kinds of target files that may be built: archive, library, and
runtime. Executables are always treated as runtime targets. Static
libraries are always treated as archive targets. Module libraries are
always treated as library targets. For non-DLL platforms shared
libraries are treated as library targets. For DLL platforms the DLL
part of a shared library is treated as a runtime target and the
corresponding import library is treated as an archive target. All
Windows-based systems including Cygwin are DLL platforms.
ARCHIVE_OUTPUT_NAME_<CONFIG>
Per-configuration output name for ARCHIVE target files.
This is the configuration-specific version of ARCHIVE_OUTPUT_NAME.
AUTOMOC
Should the target be processed with automoc (for Qt projects).
AUTOMOC is a boolean specifying whether CMake will handle the Qt moc
preprocessor automatically, i.e. without having to use the
QT4_WRAP_CPP() macro. Currently Qt4 is supported. When this property
is set to TRUE, CMake will scan the source files at build time and
invoke moc accordingly. If an #include statement like #include
"moc_foo.cpp" is found, the Q_OBJECT class declaration is expected in
the header, and moc is run on the header file. If an #include
statement like #include "foo.moc" is found, then a Q_OBJECT is
expected in the current source file and moc is run on the file itself.
Additionally, all header files are parsed for Q_OBJECT macros, and if
found, moc is also executed on those files. The resulting moc files,
which are not included as shown above in any of the source files are
included in a generated <targetname>_automoc.cpp file, which is
compiled as part of the target.This property is initialized by the
value of the variable CMAKE_AUTOMOC if it is set when a target is
created.
Additional command line options for moc can be set via the
AUTOMOC_MOC_OPTIONS property.
By setting the CMAKE_AUTOMOC_RELAXED_MODE variable to TRUE the rules
for searching the files which will be processed by moc can be relaxed.
See the documentation for this variable for more details.
AUTOMOC_MOC_OPTIONS
Additional options for moc when using automoc (see the AUTOMOC
property)
This property is only used if the AUTOMOC property is set to TRUE for
this target. In this case, it holds additional command line options
which will be used when moc is executed during the build, i.e. it is
equivalent to the optional OPTIONS argument of the qt4_wrap_cpp()
macro.
By default it is empty.
BUILD_WITH_INSTALL_RPATH
Should build tree targets have install tree rpaths.
BUILD_WITH_INSTALL_RPATH is a boolean specifying whether to link the
target in the build tree with the INSTALL_RPATH. This takes
precedence over SKIP_BUILD_RPATH and avoids the need for relinking
before installation. This property is initialized by the value of the
variable CMAKE_BUILD_WITH_INSTALL_RPATH if it is set when a target is
created.
BUNDLE
This target is a CFBundle on the Mac.
If a module library target has this property set to true it will be
built as a CFBundle when built on the mac. It will have the directory
structure required for a CFBundle and will be suitable to be used for
creating Browser Plugins or other application resources.
BUNDLE_EXTENSION
The file extension used to name a BUNDLE target on the Mac.
The default value is "bundle" - you can also use "plugin" or whatever
file extension is required by the host app for your bundle.
COMPILE_DEFINITIONS
Preprocessor definitions for compiling a target's sources.
The COMPILE_DEFINITIONS property may be set to a semicolon-separated
list of preprocessor definitions using the syntax VAR or VAR=value.
Function-style definitions are not supported. CMake will
automatically escape the value correctly for the native build system
(note that CMake language syntax may require escapes to specify some
values). This property may be set on a per-configuration basis using
the name COMPILE_DEFINITIONS_<CONFIG> where <CONFIG> is an upper-case
name (ex. "COMPILE_DEFINITIONS_DEBUG").
CMake will automatically drop some definitions that are not supported
by the native build tool. The VS6 IDE does not support definition
values with spaces (but NMake does).
Disclaimer: Most native build tools have poor support for escaping
certain values. CMake has work-arounds for many cases but some values
may just not be possible to pass correctly. If a value does not seem
to be escaped correctly, do not attempt to work-around the problem by
adding escape sequences to the value. Your work-around may break in a
future version of CMake that has improved escape support. Instead
consider defining the macro in a (configured) header file. Then
report the limitation. Known limitations include:
# - broken almost everywhere
; - broken in VS IDE and Borland Makefiles
, - broken in VS IDE
% - broken in some cases in NMake
& | - broken in some cases on MinGW
^ < > \" - broken in most Make tools on Windows
CMake does not reject these values outright because they do work in
some cases. Use with caution.
COMPILE_DEFINITIONS_<CONFIG>
Per-configuration preprocessor definitions on a target.
This is the configuration-specific version of COMPILE_DEFINITIONS.
COMPILE_FLAGS
Additional flags to use when compiling this target's sources.
The COMPILE_FLAGS property sets additional compiler flags used to
build sources within the target. Use COMPILE_DEFINITIONS to pass
additional preprocessor definitions.
DEBUG_POSTFIX
See target property <CONFIG>_POSTFIX.
This property is a special case of the more-general <CONFIG>_POSTFIX
property for the DEBUG configuration.
DEFINE_SYMBOL
Define a symbol when compiling this target's sources.
DEFINE_SYMBOL sets the name of the preprocessor symbol defined when
compiling sources in a shared library. If not set here then it is set
to target_EXPORTS by default (with some substitutions if the target is
not a valid C identifier). This is useful for headers to know whether
they are being included from inside their library our outside to
properly setup dllexport/dllimport decorations.
ENABLE_EXPORTS
Specify whether an executable exports symbols for loadable modules.
Normally an executable does not export any symbols because it is the
final program. It is possible for an executable to export symbols to
be used by loadable modules. When this property is set to true CMake
will allow other targets to "link" to the executable with the
TARGET_LINK_LIBRARIES command. On all platforms a target-level
dependency on the executable is created for targets that link to it.
For DLL platforms an import library will be created for the exported
symbols and then used for linking. All Windows-based systems
including Cygwin are DLL platforms. For non-DLL platforms that
require all symbols to be resolved at link time, such as Mac OS X, the
module will "link" to the executable using a flag like
"-bundle_loader". For other non-DLL platforms the link rule is simply
ignored since the dynamic loader will automatically bind symbols when
the module is loaded.
EXCLUDE_FROM_ALL
Exclude the target from the all target.
A property on a target that indicates if the target is excluded from
the default build target. If it is not, then with a Makefile for
example typing make will cause this target to be built. The same
concept applies to the default build of other generators. Installing
a target with EXCLUDE_FROM_ALL set to true has undefined behavior.
EchoString
A message to be displayed when the target is built.
A message to display on some generators (such as makefiles) when the
target is built.
FOLDER
Set the folder name. Use to organize targets in an IDE.
Targets with no FOLDER property will appear as top level entities in
IDEs like Visual Studio. Targets with the same FOLDER property value
will appear next to each other in a folder of that name. To nest
folders, use FOLDER values such as 'GUI/Dialogs' with '/' characters
separating folder levels.
FRAMEWORK
This target is a framework on the Mac.
If a shared library target has this property set to true it will be
built as a framework when built on the mac. It will have the
directory structure required for a framework and will be suitable to
be used with the -framework option
Fortran_FORMAT
Set to FIXED or FREE to indicate the Fortran source layout.
This property tells CMake whether the Fortran source files in a target
use fixed-format or free-format. CMake will pass the corresponding
format flag to the compiler. Use the source-specific Fortran_FORMAT
property to change the format of a specific source file. If the
variable CMAKE_Fortran_FORMAT is set when a target is created its
value is used to initialize this property.
Fortran_MODULE_DIRECTORY
Specify output directory for Fortran modules provided by the target.
If the target contains Fortran source files that provide modules and
the compiler supports a module output directory this specifies the
directory in which the modules will be placed. When this property is
not set the modules will be placed in the build directory
corresponding to the target's source directory. If the variable
CMAKE_Fortran_MODULE_DIRECTORY is set when a target is created its
value is used to initialize this property.
Note that some compilers will automatically search the module output
directory for modules USEd during compilation but others will not. If
your sources USE modules their location must be specified by
INCLUDE_DIRECTORIES regardless of this property.
GENERATOR_FILE_NAME
Generator's file for this target.
An internal property used by some generators to record the name of
project or dsp file associated with this target.
GNUtoMS
Convert GNU import library (.dll.a) to MS format (.lib).
When linking a shared library or executable that exports symbols using
GNU tools on Windows (MinGW/MSYS) with Visual Studio installed convert
the import library (.dll.a) from GNU to MS format (.lib). Both import
libraries will be installed by install(TARGETS) and exported by
install(EXPORT) and export() to be linked by applications with either
GNU- or MS-compatible tools.
If the variable CMAKE_GNUtoMS is set when a target is created its
value is used to initialize this property. The variable must be set
prior to the first command that enables a language such as project()
or enable_language(). CMake provides the variable as an option to the
user automatically when configuring on Windows with GNU tools.
HAS_CXX
Link the target using the C++ linker tool (obsolete).
This is equivalent to setting the LINKER_LANGUAGE property to CXX.
See that property's documentation for details.
IMPLICIT_DEPENDS_INCLUDE_TRANSFORM
Specify #include line transforms for dependencies in a target.
This property specifies rules to transform macro-like #include lines
during implicit dependency scanning of C and C++ source files. The
list of rules must be semicolon-separated with each entry of the form
"A_MACRO(%)=value-with-%" (the % must be literal). During dependency
scanning occurrences of A_MACRO(...) on #include lines will be
replaced by the value given with the macro argument substituted for
'%'. For example, the entry
MYDIR(%)=<mydir/%>
will convert lines of the form
#include MYDIR(myheader.h)
to
#include <mydir/myheader.h>
allowing the dependency to be followed.
This property applies to sources in the target on which it is set.
IMPORTED
Read-only indication of whether a target is IMPORTED.
The boolean value of this property is true for targets created with
the IMPORTED option to add_executable or add_library. It is false for
targets built within the project.
IMPORTED_CONFIGURATIONS
Configurations provided for an IMPORTED target.
Set this to the list of configuration names available for an IMPORTED
target. The names correspond to configurations defined in the project
from which the target is imported. If the importing project uses a
different set of configurations the names may be mapped using the
MAP_IMPORTED_CONFIG_<CONFIG> property. Ignored for non-imported
targets.
IMPORTED_IMPLIB
Full path to the import library for an IMPORTED target.
Set this to the location of the ".lib" part of a windows DLL. Ignored
for non-imported targets.
IMPORTED_IMPLIB_<CONFIG>
<CONFIG>-specific version of IMPORTED_IMPLIB property.
Configuration names correspond to those provided by the project from
which the target is imported.
IMPORTED_LINK_DEPENDENT_LIBRARIES
Dependent shared libraries of an imported shared library.
Shared libraries may be linked to other shared libraries as part of
their implementation. On some platforms the linker searches for the
dependent libraries of shared libraries they are including in the
link. Set this property to the list of dependent shared libraries of
an imported library. The list should be disjoint from the list of
interface libraries in the IMPORTED_LINK_INTERFACE_LIBRARIES property.
On platforms requiring dependent shared libraries to be found at link
time CMake uses this list to add appropriate files or paths to the
link command line. Ignored for non-imported targets.
IMPORTED_LINK_DEPENDENT_LIBRARIES_<CONFIG>
<CONFIG>-specific version of IMPORTED_LINK_DEPENDENT_LIBRARIES.
Configuration names correspond to those provided by the project from
which the target is imported. If set, this property completely
overrides the generic property for the named configuration.
IMPORTED_LINK_INTERFACE_LANGUAGES
Languages compiled into an IMPORTED static library.
Set this to the list of languages of source files compiled to produce
a STATIC IMPORTED library (such as "C" or "CXX"). CMake accounts for
these languages when computing how to link a target to the imported
library. For example, when a C executable links to an imported C++
static library CMake chooses the C++ linker to satisfy language
runtime dependencies of the static library.
This property is ignored for targets that are not STATIC libraries.
This property is ignored for non-imported targets.
IMPORTED_LINK_INTERFACE_LANGUAGES_<CONFIG>
<CONFIG>-specific version of IMPORTED_LINK_INTERFACE_LANGUAGES.
Configuration names correspond to those provided by the project from
which the target is imported. If set, this property completely
overrides the generic property for the named configuration.
IMPORTED_LINK_INTERFACE_LIBRARIES
Transitive link interface of an IMPORTED target.
Set this to the list of libraries whose interface is included when an
IMPORTED library target is linked to another target. The libraries
will be included on the link line for the target. Unlike the
LINK_INTERFACE_LIBRARIES property, this property applies to all
imported target types, including STATIC libraries. This property is
ignored for non-imported targets.
IMPORTED_LINK_INTERFACE_LIBRARIES_<CONFIG>
<CONFIG>-specific version of IMPORTED_LINK_INTERFACE_LIBRARIES.
Configuration names correspond to those provided by the project from
which the target is imported. If set, this property completely
overrides the generic property for the named configuration.
IMPORTED_LINK_INTERFACE_MULTIPLICITY
Repetition count for cycles of IMPORTED static libraries.
This is LINK_INTERFACE_MULTIPLICITY for IMPORTED targets.
IMPORTED_LINK_INTERFACE_MULTIPLICITY_<CONFIG>
<CONFIG>-specific version of IMPORTED_LINK_INTERFACE_MULTIPLICITY.
If set, this property completely overrides the generic property for
the named configuration.
IMPORTED_LOCATION
Full path to the main file on disk for an IMPORTED target.
Set this to the location of an IMPORTED target file on disk. For
executables this is the location of the executable file. For bundles
on OS X this is the location of the executable file inside
Contents/MacOS under the application bundle folder. For static
libraries and modules this is the location of the library or module.
For shared libraries on non-DLL platforms this is the location of the
shared library. For frameworks on OS X this is the location of the
library file symlink just inside the framework folder. For DLLs this
is the location of the ".dll" part of the library. For UNKNOWN
libraries this is the location of the file to be linked. Ignored for
non-imported targets.
Projects may skip IMPORTED_LOCATION if the configuration-specific
property IMPORTED_LOCATION_<CONFIG> is set. To get the location of an
imported target read one of the LOCATION or LOCATION_<CONFIG>
properties.
IMPORTED_LOCATION_<CONFIG>
<CONFIG>-specific version of IMPORTED_LOCATION property.
Configuration names correspond to those provided by the project from
which the target is imported.
IMPORTED_NO_SONAME
Specifies that an IMPORTED shared library target has no "soname".
Set this property to true for an imported shared library file that has
no "soname" field. CMake may adjust generated link commands for some
platforms to prevent the linker from using the path to the library in
place of its missing soname. Ignored for non-imported targets.
IMPORTED_NO_SONAME_<CONFIG>
<CONFIG>-specific version of IMPORTED_NO_SONAME property.
Configuration names correspond to those provided by the project from
which the target is imported.
IMPORTED_SONAME
The "soname" of an IMPORTED target of shared library type.
Set this to the "soname" embedded in an imported shared library. This
is meaningful only on platforms supporting the feature. Ignored for
non-imported targets.
IMPORTED_SONAME_<CONFIG>
<CONFIG>-specific version of IMPORTED_SONAME property.
Configuration names correspond to those provided by the project from
which the target is imported.
IMPORT_PREFIX
What comes before the import library name.
Similar to the target property PREFIX, but used for import libraries
(typically corresponding to a DLL) instead of regular libraries. A
target property that can be set to override the prefix (such as "lib")
on an import library name.
IMPORT_SUFFIX
What comes after the import library name.
Similar to the target property SUFFIX, but used for import libraries
(typically corresponding to a DLL) instead of regular libraries. A
target property that can be set to override the suffix (such as
".lib") on an import library name.
INCLUDE_DIRECTORIES
List of preprocessor include file search directories.
This property specifies the list of directories given so far to the
include_directories command. This property exists on directories and
targets. In addition to accepting values from the include_directories
command, values may be set directly on any directory or any target
using the set_property command. A target gets its initial value for
this property from the value of the directory property. A directory
gets its initial value from its parent directory if it has one. Both
directory and target property values are adjusted by calls to the
include_directories command.
The target property values are used by the generators to set the
include paths for the compiler. See also the include_directories
command.
INSTALL_NAME_DIR
Mac OSX directory name for installed targets.
INSTALL_NAME_DIR is a string specifying the directory portion of the
"install_name" field of shared libraries on Mac OSX to use in the
installed targets.
INSTALL_RPATH
The rpath to use for installed targets.
A semicolon-separated list specifying the rpath to use in installed
targets (for platforms that support it). This property is initialized
by the value of the variable CMAKE_INSTALL_RPATH if it is set when a
target is created.
INSTALL_RPATH_USE_LINK_PATH
Add paths to linker search and installed rpath.
INSTALL_RPATH_USE_LINK_PATH is a boolean that if set to true will
append directories in the linker search path and outside the project
to the INSTALL_RPATH. This property is initialized by the value of
the variable CMAKE_INSTALL_RPATH_USE_LINK_PATH if it is set when a
target is created.
INTERPROCEDURAL_OPTIMIZATION
Enable interprocedural optimization for a target.
If set to true, enables interprocedural optimizations if they are
known to be supported by the compiler.
INTERPROCEDURAL_OPTIMIZATION_<CONFIG>
Per-configuration interprocedural optimization for a target.
This is a per-configuration version of INTERPROCEDURAL_OPTIMIZATION.
If set, this property overrides the generic property for the named
configuration.
LABELS
Specify a list of text labels associated with a target.
Target label semantics are currently unspecified.
LIBRARY_OUTPUT_DIRECTORY
Output directory in which to build LIBRARY target files.
This property specifies the directory into which library target files
should be built. Multi-configuration generators (VS, Xcode) append a
per-configuration subdirectory to the specified directory. There are
three kinds of target files that may be built: archive, library, and
runtime. Executables are always treated as runtime targets. Static
libraries are always treated as archive targets. Module libraries are
always treated as library targets. For non-DLL platforms shared
libraries are treated as library targets. For DLL platforms the DLL
part of a shared library is treated as a runtime target and the
corresponding import library is treated as an archive target. All
Windows-based systems including Cygwin are DLL platforms. This
property is initialized by the value of the variable
CMAKE_LIBRARY_OUTPUT_DIRECTORY if it is set when a target is created.
LIBRARY_OUTPUT_DIRECTORY_<CONFIG>
Per-configuration output directory for LIBRARY target files.
This is a per-configuration version of LIBRARY_OUTPUT_DIRECTORY, but
multi-configuration generators (VS, Xcode) do NOT append a
per-configuration subdirectory to the specified directory. This
property is initialized by the value of the variable
CMAKE_LIBRARY_OUTPUT_DIRECTORY_<CONFIG> if it is set when a target is
created.
LIBRARY_OUTPUT_NAME
Output name for LIBRARY target files.
This property specifies the base name for library target files. It
overrides OUTPUT_NAME and OUTPUT_NAME_<CONFIG> properties. There are
three kinds of target files that may be built: archive, library, and
runtime. Executables are always treated as runtime targets. Static
libraries are always treated as archive targets. Module libraries are
always treated as library targets. For non-DLL platforms shared
libraries are treated as library targets. For DLL platforms the DLL
part of a shared library is treated as a runtime target and the
corresponding import library is treated as an archive target. All
Windows-based systems including Cygwin are DLL platforms.
LIBRARY_OUTPUT_NAME_<CONFIG>
Per-configuration output name for LIBRARY target files.
This is the configuration-specific version of LIBRARY_OUTPUT_NAME.
LINKER_LANGUAGE
Specifies language whose compiler will invoke the linker.
For executables, shared libraries, and modules, this sets the language
whose compiler is used to link the target (such as "C" or "CXX"). A
typical value for an executable is the language of the source file
providing the program entry point (main). If not set, the language
with the highest linker preference value is the default. See
documentation of CMAKE_<LANG>_LINKER_PREFERENCE variables.
LINK_DEPENDS
Additional files on which a target binary depends for linking.
Specifies a semicolon-separated list of full-paths to files on which
the link rule for this target depends. The target binary will be
linked if any of the named files is newer than it.
This property is ignored by non-Makefile generators. It is intended
to specify dependencies on "linker scripts" for custom Makefile link
rules.
LINK_FLAGS
Additional flags to use when linking this target.
The LINK_FLAGS property can be used to add extra flags to the link
step of a target. LINK_FLAGS_<CONFIG> will add to the configuration
<CONFIG>, for example, DEBUG, RELEASE, MINSIZEREL, RELWITHDEBINFO.
LINK_FLAGS_<CONFIG>
Per-configuration linker flags for a target.
This is the configuration-specific version of LINK_FLAGS.
LINK_INTERFACE_LIBRARIES
List public interface libraries for a shared library or executable.
By default linking to a shared library target transitively links to
targets with which the library itself was linked. For an executable
with exports (see the ENABLE_EXPORTS property) no default transitive
link dependencies are used. This property replaces the default
transitive link dependencies with an explicit list. When the target
is linked into another target the libraries listed (and recursively
their link interface libraries) will be provided to the other target
also. If the list is empty then no transitive link dependencies will
be incorporated when this target is linked into another target even if
the default set is non-empty. This property is initialized by the
value of the variable CMAKE_LINK_INTERFACE_LIBRARIES if it is set when
a target is created. This property is ignored for STATIC libraries.
LINK_INTERFACE_LIBRARIES_<CONFIG>
Per-configuration list of public interface libraries for a target.
This is the configuration-specific version of
LINK_INTERFACE_LIBRARIES. If set, this property completely overrides
the generic property for the named configuration.
LINK_INTERFACE_MULTIPLICITY
Repetition count for STATIC libraries with cyclic dependencies.
When linking to a STATIC library target with cyclic dependencies the
linker may need to scan more than once through the archives in the
strongly connected component of the dependency graph. CMake by
default constructs the link line so that the linker will scan through
the component at least twice. This property specifies the minimum
number of scans if it is larger than the default. CMake uses the
largest value specified by any target in a component.
LINK_INTERFACE_MULTIPLICITY_<CONFIG>
Per-configuration repetition count for cycles of STATIC libraries.
This is the configuration-specific version of
LINK_INTERFACE_MULTIPLICITY. If set, this property completely
overrides the generic property for the named configuration.
LINK_SEARCH_END_STATIC
End a link line such that static system libraries are used.
Some linkers support switches such as -Bstatic and -Bdynamic to
determine whether to use static or shared libraries for -lXXX options.
CMake uses these options to set the link type for libraries whose full
paths are not known or (in some cases) are in implicit link
directories for the platform. By default CMake adds an option at the
end of the library list (if necessary) to set the linker search type
back to its starting type. This property switches the final linker
search type to -Bstatic regardless of how it started. See also
LINK_SEARCH_START_STATIC.
LINK_SEARCH_START_STATIC
Assume the linker looks for static libraries by default.
Some linkers support switches such as -Bstatic and -Bdynamic to
determine whether to use static or shared libraries for -lXXX options.
CMake uses these options to set the link type for libraries whose full
paths are not known or (in some cases) are in implicit link
directories for the platform. By default the linker search type is
assumed to be -Bdynamic at the beginning of the library list. This
property switches the assumption to -Bstatic. It is intended for use
when linking an executable statically (e.g. with the GNU -static
option). See also LINK_SEARCH_END_STATIC.
LOCATION
Read-only location of a target on disk.
For an imported target, this read-only property returns the value of
the LOCATION_<CONFIG> property for an unspecified configuration
<CONFIG> provided by the target.
For a non-imported target, this property is provided for compatibility
with CMake 2.4 and below. It was meant to get the location of an
executable target's output file for use in add_custom_command. The
path may contain a build-system-specific portion that is replaced at
build time with the configuration getting built (such as
"$(ConfigurationName)" in VS). In CMake 2.6 and above
add_custom_command automatically recognizes a target name in its
COMMAND and DEPENDS options and computes the target location. In
CMake 2.8.4 and above add_custom_command recognizes generator
expressions to refer to target locations anywhere in the command.
Therefore this property is not needed for creating custom commands.
Do not set properties that affect the location of a target after
reading this property. These include properties whose names match
"(RUNTIME|LIBRARY|ARCHIVE)_OUTPUT_(NAME|DIRECTORY)(_<CONFIG>)?" or
"(IMPLIB_)?(PREFIX|SUFFIX)". Failure to follow this rule is not
diagnosed and leaves the location of the target undefined.
LOCATION_<CONFIG>
Read-only property providing a target location on disk.
A read-only property that indicates where a target's main file is
located on disk for the configuration <CONFIG>. The property is
defined only for library and executable targets. An imported target
may provide a set of configurations different from that of the
importing project. By default CMake looks for an exact-match but
otherwise uses an arbitrary available configuration. Use the
MAP_IMPORTED_CONFIG_<CONFIG> property to map imported configurations
explicitly.
Do not set properties that affect the location of a target after
reading this property. These include properties whose names match
"(RUNTIME|LIBRARY|ARCHIVE)_OUTPUT_(NAME|DIRECTORY)(_<CONFIG>)?" or
"(IMPLIB_)?(PREFIX|SUFFIX)". Failure to follow this rule is not
diagnosed and leaves the location of the target undefined.
MACOSX_BUNDLE
Build an executable as an application bundle on Mac OS X.
When this property is set to true the executable when built on Mac OS
X will be created as an application bundle. This makes it a GUI
executable that can be launched from the Finder. See the
MACOSX_BUNDLE_INFO_PLIST target property for information about
creation of the Info.plist file for the application bundle. This
property is initialized by the value of the variable
CMAKE_MACOSX_BUNDLE if it is set when a target is created.
MACOSX_BUNDLE_INFO_PLIST
Specify a custom Info.plist template for a Mac OS X App Bundle.
An executable target with MACOSX_BUNDLE enabled will be built as an
application bundle on Mac OS X. By default its Info.plist file is
created by configuring a template called MacOSXBundleInfo.plist.in
located in the CMAKE_MODULE_PATH. This property specifies an
alternative template file name which may be a full path.
The following target properties may be set to specify content to be
configured into the file:
MACOSX_BUNDLE_INFO_STRING
MACOSX_BUNDLE_ICON_FILE
MACOSX_BUNDLE_GUI_IDENTIFIER
MACOSX_BUNDLE_LONG_VERSION_STRING
MACOSX_BUNDLE_BUNDLE_NAME
MACOSX_BUNDLE_SHORT_VERSION_STRING
MACOSX_BUNDLE_BUNDLE_VERSION
MACOSX_BUNDLE_COPYRIGHT
CMake variables of the same name may be set to affect all targets in a
directory that do not have each specific property set. If a custom
Info.plist is specified by this property it may of course hard-code
all the settings instead of using the target properties.
MACOSX_FRAMEWORK_INFO_PLIST
Specify a custom Info.plist template for a Mac OS X Framework.
An library target with FRAMEWORK enabled will be built as a framework
on Mac OS X. By default its Info.plist file is created by configuring
a template called MacOSXFrameworkInfo.plist.in located in the
CMAKE_MODULE_PATH. This property specifies an alternative template
file name which may be a full path.
The following target properties may be set to specify content to be
configured into the file:
MACOSX_FRAMEWORK_ICON_FILE
MACOSX_FRAMEWORK_IDENTIFIER
MACOSX_FRAMEWORK_SHORT_VERSION_STRING
MACOSX_FRAMEWORK_BUNDLE_VERSION
CMake variables of the same name may be set to affect all targets in a
directory that do not have each specific property set. If a custom
Info.plist is specified by this property it may of course hard-code
all the settings instead of using the target properties.
MAP_IMPORTED_CONFIG_<CONFIG>
Map from project configuration to IMPORTED target's configuration.
Set this to the list of configurations of an imported target that may
be used for the current project's <CONFIG> configuration. Targets
imported from another project may not provide the same set of
configuration names available in the current project. Setting this
property tells CMake what imported configurations are suitable for use
when building the <CONFIG> configuration. The first configuration in
the list found to be provided by the imported target is selected. If
no matching configurations are available the imported target is
considered to be not found. This property is ignored for non-imported
targets.
OSX_ARCHITECTURES
Target specific architectures for OS X.
The OSX_ARCHITECTURES property sets the target binary architecture for
targets on OS X. This property is initialized by the value of the
variable CMAKE_OSX_ARCHITECTURES if it is set when a target is
created. Use OSX_ARCHITECTURES_<CONFIG> to set the binary
architectures on a per-configuration basis. <CONFIG> is an upper-case
name (ex: "OSX_ARCHITECTURES_DEBUG").
OSX_ARCHITECTURES_<CONFIG>
Per-configuration OS X binary architectures for a target.
This property is the configuration-specific version of
OSX_ARCHITECTURES.
OUTPUT_NAME
Output name for target files.
This sets the base name for output files created for an executable or
library target. If not set, the logical target name is used by
default.
OUTPUT_NAME_<CONFIG>
Per-configuration target file base name.
This is the configuration-specific version of OUTPUT_NAME.
POST_INSTALL_SCRIPT
Deprecated install support.
The PRE_INSTALL_SCRIPT and POST_INSTALL_SCRIPT properties are the old
way to specify CMake scripts to run before and after installing a
target. They are used only when the old INSTALL_TARGETS command is
used to install the target. Use the INSTALL command instead.
PREFIX
What comes before the library name.
A target property that can be set to override the prefix (such as
"lib") on a library name.
PRE_INSTALL_SCRIPT
Deprecated install support.
The PRE_INSTALL_SCRIPT and POST_INSTALL_SCRIPT properties are the old
way to specify CMake scripts to run before and after installing a
target. They are used only when the old INSTALL_TARGETS command is
used to install the target. Use the INSTALL command instead.
PRIVATE_HEADER
Specify private header files in a FRAMEWORK shared library target.
Shared library targets marked with the FRAMEWORK property generate
frameworks on OS X and normal shared libraries on other platforms.
This property may be set to a list of header files to be placed in the
PrivateHeaders directory inside the framework folder. On non-Apple
platforms these headers may be installed using the PRIVATE_HEADER
option to the install(TARGETS) command.
PROJECT_LABEL
Change the name of a target in an IDE.
Can be used to change the name of the target in an IDE like Visual
Studio.
PUBLIC_HEADER
Specify public header files in a FRAMEWORK shared library target.
Shared library targets marked with the FRAMEWORK property generate
frameworks on OS X and normal shared libraries on other platforms.
This property may be set to a list of header files to be placed in the
Headers directory inside the framework folder. On non-Apple platforms
these headers may be installed using the PUBLIC_HEADER option to the
install(TARGETS) command.
RESOURCE
Specify resource files in a FRAMEWORK shared library target.
Shared library targets marked with the FRAMEWORK property generate
frameworks on OS X and normal shared libraries on other platforms.
This property may be set to a list of files to be placed in the
Resources directory inside the framework folder. On non-Apple
platforms these files may be installed using the RESOURCE option to
the install(TARGETS) command.
RULE_LAUNCH_COMPILE
Specify a launcher for compile rules.
See the global property of the same name for details. This overrides
the global and directory property for a target.
RULE_LAUNCH_CUSTOM
Specify a launcher for custom rules.
See the global property of the same name for details. This overrides
the global and directory property for a target.
RULE_LAUNCH_LINK
Specify a launcher for link rules.
See the global property of the same name for details. This overrides
the global and directory property for a target.
RUNTIME_OUTPUT_DIRECTORY
Output directory in which to build RUNTIME target files.
This property specifies the directory into which runtime target files
should be built. Multi-configuration generators (VS, Xcode) append a
per-configuration subdirectory to the specified directory. There are
three kinds of target files that may be built: archive, library, and
runtime. Executables are always treated as runtime targets. Static
libraries are always treated as archive targets. Module libraries are
always treated as library targets. For non-DLL platforms shared
libraries are treated as library targets. For DLL platforms the DLL
part of a shared library is treated as a runtime target and the
corresponding import library is treated as an archive target. All
Windows-based systems including Cygwin are DLL platforms. This
property is initialized by the value of the variable
CMAKE_RUNTIME_OUTPUT_DIRECTORY if it is set when a target is created.
RUNTIME_OUTPUT_DIRECTORY_<CONFIG>
Per-configuration output directory for RUNTIME target files.
This is a per-configuration version of RUNTIME_OUTPUT_DIRECTORY, but
multi-configuration generators (VS, Xcode) do NOT append a
per-configuration subdirectory to the specified directory. This
property is initialized by the value of the variable
CMAKE_RUNTIME_OUTPUT_DIRECTORY_<CONFIG> if it is set when a target is
created.
RUNTIME_OUTPUT_NAME
Output name for RUNTIME target files.
This property specifies the base name for runtime target files. It
overrides OUTPUT_NAME and OUTPUT_NAME_<CONFIG> properties. There are
three kinds of target files that may be built: archive, library, and
runtime. Executables are always treated as runtime targets. Static
libraries are always treated as archive targets. Module libraries are
always treated as library targets. For non-DLL platforms shared
libraries are treated as library targets. For DLL platforms the DLL
part of a shared library is treated as a runtime target and the
corresponding import library is treated as an archive target. All
Windows-based systems including Cygwin are DLL platforms.
RUNTIME_OUTPUT_NAME_<CONFIG>
Per-configuration output name for RUNTIME target files.
This is the configuration-specific version of RUNTIME_OUTPUT_NAME.
SKIP_BUILD_RPATH
Should rpaths be used for the build tree.
SKIP_BUILD_RPATH is a boolean specifying whether to skip automatic
generation of an rpath allowing the target to run from the build tree.
This property is initialized by the value of the variable
CMAKE_SKIP_BUILD_RPATH if it is set when a target is created.
SOURCES
Source names specified for a target.
Read-only list of sources specified for a target. The names returned
are suitable for passing to the set_source_files_properties command.
SOVERSION
What version number is this target.
For shared libraries VERSION and SOVERSION can be used to specify the
build version and api version respectively. When building or
installing appropriate symlinks are created if the platform supports
symlinks and the linker supports so-names. If only one of both is
specified the missing is assumed to have the same version number. For
shared libraries and executables on Windows the VERSION attribute is
parsed to extract a "major.minor" version number. These numbers are
used as the image version of the binary.
STATIC_LIBRARY_FLAGS
Extra flags to use when linking static libraries.
Extra flags to use when linking a static library.
STATIC_LIBRARY_FLAGS_<CONFIG>
Per-configuration flags for creating a static library.
This is the configuration-specific version of STATIC_LIBRARY_FLAGS.
SUFFIX
What comes after the target name.
A target property that can be set to override the suffix (such as
".so" or ".exe") on the name of a library, module or executable.
TYPE
The type of the target.
This read-only property can be used to test the type of the given
target. It will be one of STATIC_LIBRARY, MODULE_LIBRARY,
SHARED_LIBRARY, EXECUTABLE or one of the internal target types.
VERSION
What version number is this target.
For shared libraries VERSION and SOVERSION can be used to specify the
build version and api version respectively. When building or
installing appropriate symlinks are created if the platform supports
symlinks and the linker supports so-names. If only one of both is
specified the missing is assumed to have the same version number. For
executables VERSION can be used to specify the build version. When
building or installing appropriate symlinks are created if the
platform supports symlinks. For shared libraries and executables on
Windows the VERSION attribute is parsed to extract a "major.minor"
version number. These numbers are used as the image version of the
binary.
VS_DOTNET_REFERENCES
Visual Studio managed project .NET references
Adds one or more semicolon-delimited .NET references to a generated
Visual Studio project. For example, "System;System.Windows.Forms".
VS_GLOBAL_<variable>
Visual Studio project-specific global variable.
Tell the Visual Studio generator to set the global variable
'<variable>' to a given value in the generated Visual Studio project.
Ignored on other generators. Qt integration works better if
VS_GLOBAL_QtVersion is set to the version FindQt4.cmake found. For
example, "4.7.3"
VS_GLOBAL_KEYWORD
Visual Studio project keyword.
Sets the "keyword" attribute for a generated Visual Studio project.
Defaults to "Win32Proj". You may wish to override this value with
"ManagedCProj", for example, in a Visual Studio managed C++ unit test
project.
VS_GLOBAL_PROJECT_TYPES
Visual Studio project type(s).
Can be set to one or more UUIDs recognized by Visual Studio to
indicate the type of project. This value is copied verbatim into the
generated project file. Example for a managed C++ unit testing
project:
{3AC096D0-A1C2-E12C-1390-A8335801FDAB};{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}
UUIDs are semicolon-delimited.
VS_KEYWORD
Visual Studio project keyword.
Can be set to change the visual studio keyword, for example QT
integration works better if this is set to Qt4VSv1.0.
VS_SCC_AUXPATH
Visual Studio Source Code Control Aux Path.
Can be set to change the visual studio source code control auxpath
property.
VS_SCC_LOCALPATH
Visual Studio Source Code Control Local Path.
Can be set to change the visual studio source code control local path
property.
VS_SCC_PROJECTNAME
Visual Studio Source Code Control Project.
Can be set to change the visual studio source code control project
name property.
VS_SCC_PROVIDER
Visual Studio Source Code Control Provider.
Can be set to change the visual studio source code control provider
property.
VS_WINRT_EXTENSIONS
Visual Studio project C++/CX language extensions for Windows Runtime
Can be set to enable C++/CX language extensions.
VS_WINRT_REFERENCES
Visual Studio project Windows Runtime Metadata references
Adds one or more semicolon-delimited WinRT references to a generated
Visual Studio project. For example, "Windows;Windows.UI.Core".
WIN32_EXECUTABLE
Build an executable with a WinMain entry point on windows.
When this property is set to true the executable when linked on
Windows will be created with a WinMain() entry point instead of of
just main().This makes it a GUI executable instead of a console
application. See the CMAKE_MFC_FLAG variable documentation to
configure use of MFC for WinMain executables. This property is
initialized by the value of the variable CMAKE_WIN32_EXECUTABLE if it
is set when a target is created.
XCODE_ATTRIBUTE_<an-attribute>
Set Xcode target attributes directly.
Tell the Xcode generator to set '<an-attribute>' to a given value in
the generated Xcode project. Ignored on other generators.
------------------------------------------------------------------------------
Properties on Tests
ATTACHED_FILES
Attach a list of files to a dashboard submission.
Set this property to a list of files that will be encoded and
submitted to the dashboard as an addition to the test result.
ATTACHED_FILES_ON_FAIL
Attach a list of files to a dashboard submission if the test fails.
Same as ATTACHED_FILES, but these files will only be included if the
test does not pass.
COST
Set this to a floating point value. Tests in a test set will be run
in descending order of cost.
This property describes the cost of a test. You can explicitly set
this value; tests with higher COST values will run first.
DEPENDS
Specifies that this test should only be run after the specified list
of tests.
Set this to a list of tests that must finish before this test is run.
ENVIRONMENT
Specify environment variables that should be defined for running a
test.
If set to a list of environment variables and values of the form
MYVAR=value those environment variables will be defined while running
the test. The environment is restored to its previous state after the
test is done.
FAIL_REGULAR_EXPRESSION
If the output matches this regular expression the test will fail.
If set, if the output matches one of specified regular expressions,
the test will fail.For example: PASS_REGULAR_EXPRESSION
"[^a-z]Error;ERROR;Failed"
LABELS
Specify a list of text labels associated with a test.
The list is reported in dashboard submissions.
MEASUREMENT
Specify a CDASH measurement and value to be reported for a test.
If set to a name then that name will be reported to CDASH as a named
measurement with a value of 1. You may also specify a value by
setting MEASUREMENT to "measurement=value".
PASS_REGULAR_EXPRESSION
The output must match this regular expression for the test to pass.
If set, the test output will be checked against the specified regular
expressions and at least one of the regular expressions has to match,
otherwise the test will fail.
PROCESSORS
How many process slots this test requires
Denotes the number of processors that this test will require. This is
typically used for MPI tests, and should be used in conjunction with
the ctest_test PARALLEL_LEVEL option.
REQUIRED_FILES
List of files required to run the test.
If set to a list of files, the test will not be run unless all of the
files exist.
RESOURCE_LOCK
Specify a list of resources that are locked by this test.
If multiple tests specify the same resource lock, they are guaranteed
not to run concurrently.
RUN_SERIAL
Do not run this test in parallel with any other test.
Use this option in conjunction with the ctest_test PARALLEL_LEVEL
option to specify that this test should not be run in parallel with
any other tests.
TIMEOUT
How many seconds to allow for this test.
This property if set will limit a test to not take more than the
specified number of seconds to run. If it exceeds that the test
process will be killed and ctest will move to the next test. This
setting takes precedence over CTEST_TESTING_TIMEOUT.
WILL_FAIL
If set to true, this will invert the pass/fail flag of the test.
This property can be used for tests that are expected to fail and
return a non zero return code.
WORKING_DIRECTORY
The directory from which the test executable will be called.
If this is not set it is called from the directory the test executable
is located in.
------------------------------------------------------------------------------
Variables
------------------------------------------------------------------------------
Variables That Change Behavior
BUILD_SHARED_LIBS
Global flag to cause add_library to create shared libraries if on.
If present and true, this will cause all libraries to be built shared
unless the library was explicitly added as a static library. This
variable is often added to projects as an OPTION so that each user of
a project can decide if they want to build the project using shared or
static libraries.
CMAKE_AUTOMOC_RELAXED_MODE
Switch between strict and relaxed automoc mode.
By default, automoc behaves exactly as described in the documentation
of the AUTOMOC target property. When set to TRUE, it accepts more
input and tries to find the correct input file for moc even if it
differs from the documented behaviour. In this mode it e.g. also
checks whether a header file is intended to be processed by moc when a
"foo.moc" file has been included.
Relaxed mode has to be enabled for KDE4 compatibility.
CMAKE_BACKWARDS_COMPATIBILITY
Version of cmake required to build project
From the point of view of backwards compatibility, this specifies what
version of CMake should be supported. By default this value is the
version number of CMake that you are running. You can set this to an
older version of CMake to support deprecated commands of CMake in
projects that were written to use older versions of CMake. This can
be set by the user or set at the beginning of a CMakeLists file.
CMAKE_BUILD_TYPE
Specifies the build type for make based generators.
This specifies what build type will be built in this tree. Possible
values are empty, Debug, Release, RelWithDebInfo and MinSizeRel. This
variable is only supported for make based generators. If this
variable is supported, then CMake will also provide initial values for
the variables with the name
CMAKE_C_FLAGS_[DEBUG|RELEASE|RELWITHDEBINFO|MINSIZEREL]. For example,
if CMAKE_BUILD_TYPE is Debug, then CMAKE_C_FLAGS_DEBUG will be added
to the CMAKE_C_FLAGS.
CMAKE_COLOR_MAKEFILE
Enables color output when using the Makefile generator.
When enabled, the generated Makefiles will produce colored output.
Default is ON.
CMAKE_CONFIGURATION_TYPES
Specifies the available build types.
This specifies what build types will be available such as Debug,
Release, RelWithDebInfo etc. This has reasonable defaults on most
platforms. But can be extended to provide other build types. See
also CMAKE_BUILD_TYPE.
CMAKE_DISABLE_FIND_PACKAGE_<PackageName>
Variable for disabling find_package() calls.
Every non-REQUIRED find_package() call in a project can be disabled by
setting the variable CMAKE_DISABLE_FIND_PACKAGE_<PackageName> to TRUE.
This can be used to build a project without an optional package,
although that package is installed.
This switch should be used during the initial CMake run. Otherwise if
the package has already been found in a previous CMake run, the
variables which have been stored in the cache will still be there. In
the case it is recommended to remove the cache variables for this
package from the cache using the cache editor or cmake -U
CMAKE_FIND_LIBRARY_PREFIXES
Prefixes to prepend when looking for libraries.
This specifies what prefixes to add to library names when the
find_library command looks for libraries. On UNIX systems this is
typically lib, meaning that when trying to find the foo library it
will look for libfoo.
CMAKE_FIND_LIBRARY_SUFFIXES
Suffixes to append when looking for libraries.
This specifies what suffixes to add to library names when the
find_library command looks for libraries. On Windows systems this is
typically .lib and .dll, meaning that when trying to find the foo
library it will look for foo.dll etc.
CMAKE_FIND_PACKAGE_WARN_NO_MODULE
Tell find_package to warn if called without an explicit mode.
If find_package is called without an explicit mode option (MODULE,
CONFIG or NO_MODULE) and no Find<pkg>.cmake module is in
CMAKE_MODULE_PATH then CMake implicitly assumes that the caller
intends to search for a package configuration file. If no package
configuration file is found then the wording of the failure message
must account for both the case that the package is really missing and
the case that the project has a bug and failed to provide the intended
Find module. If instead the caller specifies an explicit mode option
then the failure message can be more specific.
Set CMAKE_FIND_PACKAGE_WARN_NO_MODULE to TRUE to tell find_package to
warn when it implicitly assumes Config mode. This helps developers
enforce use of an explicit mode in all calls to find_package within a
project.
CMAKE_IGNORE_PATH
Path to be ignored by FIND_XXX() commands.
Specifies directories to be ignored by searches in FIND_XXX() commands
This is useful in cross-compiled environments where some system
directories contain incompatible but possibly linkable libraries. For
example, on cross-compiled cluster environments, this allows a user to
ignore directories containing libraries meant for the front-end
machine that modules like FindX11 (and others) would normally search.
By default this is empty; it is intended to be set by the project.
Note that CMAKE_IGNORE_PATH takes a list of directory names, NOT a
list of prefixes. If you want to ignore paths under prefixes (bin,
include, lib, etc.), you'll need to specify them explicitly. See also
CMAKE_PREFIX_PATH, CMAKE_LIBRARY_PATH, CMAKE_INCLUDE_PATH,
CMAKE_PROGRAM_PATH.
CMAKE_INCLUDE_PATH
Path used for searching by FIND_FILE() and FIND_PATH().
Specifies a path which will be used both by FIND_FILE() and
FIND_PATH(). Both commands will check each of the contained
directories for the existence of the file which is currently searched.
By default it is empty, it is intended to be set by the project. See
also CMAKE_SYSTEM_INCLUDE_PATH, CMAKE_PREFIX_PATH.
CMAKE_INSTALL_PREFIX
Install directory used by install.
If "make install" is invoked or INSTALL is built, this directory is
pre-pended onto all install directories. This variable defaults to
/usr/local on UNIX and c:/Program Files on Windows.
CMAKE_LIBRARY_PATH
Path used for searching by FIND_LIBRARY().
Specifies a path which will be used by FIND_LIBRARY(). FIND_LIBRARY()
will check each of the contained directories for the existence of the
library which is currently searched. By default it is empty, it is
intended to be set by the project. See also
CMAKE_SYSTEM_LIBRARY_PATH, CMAKE_PREFIX_PATH.
CMAKE_MFC_FLAG
Tell cmake to use MFC for an executable or dll.
This can be set in a CMakeLists.txt file and will enable MFC in the
application. It should be set to 1 for static the static MFC library,
and 2 for the shared MFC library. This is used in visual studio 6 and
7 project files. The CMakeSetup dialog used MFC and the
CMakeLists.txt looks like this:
add_definitions(-D_AFXDLL)
set(CMAKE_MFC_FLAG 2)
add_executable(CMakeSetup WIN32 ${SRCS})
CMAKE_MODULE_PATH
List of directories to search for CMake modules.
Commands like include() and find_package() search for files in
directories listed by this variable before checking the default
modules that come with CMake.
CMAKE_NOT_USING_CONFIG_FLAGS
Skip _BUILD_TYPE flags if true.
This is an internal flag used by the generators in CMake to tell CMake
to skip the _BUILD_TYPE flags.
CMAKE_POLICY_DEFAULT_CMP<NNNN>
Default for CMake Policy CMP<NNNN> when it is otherwise left unset.
Commands cmake_minimum_required(VERSION) and cmake_policy(VERSION) by
default leave policies introduced after the given version unset. Set
CMAKE_POLICY_DEFAULT_CMP<NNNN> to OLD or NEW to specify the default
for policy CMP<NNNN>, where <NNNN> is the policy number.
This variable should not be set by a project in CMake code; use
cmake_policy(SET) instead. Users running CMake may set this variable
in the cache (e.g. -DCMAKE_POLICY_DEFAULT_CMP<NNNN>=<OLD|NEW>) to set
a policy not otherwise set by the project. Set to OLD to quiet a
policy warning while using old behavior or to NEW to try building the
project with new behavior.
CMAKE_PREFIX_PATH
Path used for searching by FIND_XXX(), with appropriate suffixes
added.
Specifies a path which will be used by the FIND_XXX() commands. It
contains the "base" directories, the FIND_XXX() commands append
appropriate subdirectories to the base directories. So FIND_PROGRAM()
adds /bin to each of the directories in the path, FIND_LIBRARY()
appends /lib to each of the directories, and FIND_PATH() and
FIND_FILE() append /include . By default it is empty, it is intended
to be set by the project. See also CMAKE_SYSTEM_PREFIX_PATH,
CMAKE_INCLUDE_PATH, CMAKE_LIBRARY_PATH, CMAKE_PROGRAM_PATH.
CMAKE_PROGRAM_PATH
Path used for searching by FIND_PROGRAM().
Specifies a path which will be used by FIND_PROGRAM(). FIND_PROGRAM()
will check each of the contained directories for the existence of the
program which is currently searched. By default it is empty, it is
intended to be set by the project. See also
CMAKE_SYSTEM_PROGRAM_PATH, CMAKE_PREFIX_PATH.
CMAKE_SKIP_INSTALL_ALL_DEPENDENCY
Don't make the install target depend on the all target.
By default, the "install" target depends on the "all" target. This
has the effect, that when "make install" is invoked or INSTALL is
built, first the "all" target is built, then the installation starts.
If CMAKE_SKIP_INSTALL_ALL_DEPENDENCY is set to TRUE, this dependency
is not created, so the installation process will start immediately,
independent from whether the project has been completely built or not.
CMAKE_SYSTEM_IGNORE_PATH
Path to be ignored by FIND_XXX() commands.
Specifies directories to be ignored by searches in FIND_XXX() commands
This is useful in cross-compiled environments where some system
directories contain incompatible but possibly linkable libraries. For
example, on cross-compiled cluster environments, this allows a user to
ignore directories containing libraries meant for the front-end
machine that modules like FindX11 (and others) would normally search.
By default this contains a list of directories containing incompatible
binaries for the host system. See also CMAKE_SYSTEM_PREFIX_PATH,
CMAKE_SYSTEM_LIBRARY_PATH, CMAKE_SYSTEM_INCLUDE_PATH, and
CMAKE_SYSTEM_PROGRAM_PATH.
CMAKE_SYSTEM_INCLUDE_PATH
Path used for searching by FIND_FILE() and FIND_PATH().
Specifies a path which will be used both by FIND_FILE() and
FIND_PATH(). Both commands will check each of the contained
directories for the existence of the file which is currently searched.
By default it contains the standard directories for the current
system. It is NOT intended to be modified by the project, use
CMAKE_INCLUDE_PATH for this. See also CMAKE_SYSTEM_PREFIX_PATH.
CMAKE_SYSTEM_LIBRARY_PATH
Path used for searching by FIND_LIBRARY().
Specifies a path which will be used by FIND_LIBRARY(). FIND_LIBRARY()
will check each of the contained directories for the existence of the
library which is currently searched. By default it contains the
standard directories for the current system. It is NOT intended to be
modified by the project, use CMAKE_LIBRARY_PATH for this. See also
CMAKE_SYSTEM_PREFIX_PATH.
CMAKE_SYSTEM_PREFIX_PATH
Path used for searching by FIND_XXX(), with appropriate suffixes
added.
Specifies a path which will be used by the FIND_XXX() commands. It
contains the "base" directories, the FIND_XXX() commands append
appropriate subdirectories to the base directories. So FIND_PROGRAM()
adds /bin to each of the directories in the path, FIND_LIBRARY()
appends /lib to each of the directories, and FIND_PATH() and
FIND_FILE() append /include . By default this contains the standard
directories for the current system. It is NOT intended to be modified
by the project, use CMAKE_PREFIX_PATH for this. See also
CMAKE_SYSTEM_INCLUDE_PATH, CMAKE_SYSTEM_LIBRARY_PATH,
CMAKE_SYSTEM_PROGRAM_PATH, and CMAKE_SYSTEM_IGNORE_PATH.
CMAKE_SYSTEM_PROGRAM_PATH
Path used for searching by FIND_PROGRAM().
Specifies a path which will be used by FIND_PROGRAM(). FIND_PROGRAM()
will check each of the contained directories for the existence of the
program which is currently searched. By default it contains the
standard directories for the current system. It is NOT intended to be
modified by the project, use CMAKE_PROGRAM_PATH for this. See also
CMAKE_SYSTEM_PREFIX_PATH.
CMAKE_USER_MAKE_RULES_OVERRIDE
Specify a CMake file that overrides platform information.
CMake loads the specified file while enabling support for each
language from either the project() or enable_language() commands. It
is loaded after CMake's builtin compiler and platform information
modules have been loaded but before the information is used. The file
may set platform information variables to override CMake's defaults.
This feature is intended for use only in overriding information
variables that must be set before CMake builds its first test project
to check that the compiler for a language works. It should not be
used to load a file in cases that a normal include() will work. Use
it only as a last resort for behavior that cannot be achieved any
other way. For example, one may set CMAKE_C_FLAGS_INIT to change the
default value used to initialize CMAKE_C_FLAGS before it is cached.
The override file should NOT be used to set anything that could be set
after languages are enabled, such as variables like
CMAKE_RUNTIME_OUTPUT_DIRECTORY that affect the placement of binaries.
Information set in the file will be used for try_compile and try_run
builds too.
------------------------------------------------------------------------------
Variables That Describe the System
APPLE
True if running on Mac OSX.
Set to true on Mac OSX.
BORLAND
True if the borland compiler is being used.
This is set to true if the Borland compiler is being used.
CMAKE_CL_64
Using the 64 bit compiler from Microsoft
Set to true when using the 64 bit cl compiler from Microsoft.
CMAKE_COMPILER_2005
Using the Visual Studio 2005 compiler from Microsoft
Set to true when using the Visual Studio 2005 compiler from Microsoft.
CMAKE_HOST_APPLE
True for Apple OSXoperating systems.
Set to true when the host system is Apple OSX.
CMAKE_HOST_SYSTEM
Name of system cmake is being run on.
The same as CMAKE_SYSTEM but for the host system instead of the target
system when cross compiling.
CMAKE_HOST_SYSTEM_NAME
Name of the OS CMake is running on.
The same as CMAKE_SYSTEM_NAME but for the host system instead of the
target system when cross compiling.
CMAKE_HOST_SYSTEM_PROCESSOR
The name of the CPU CMake is running on.
The same as CMAKE_SYSTEM_PROCESSOR but for the host system instead of
the target system when cross compiling.
CMAKE_HOST_SYSTEM_VERSION
OS version CMake is running on.
The same as CMAKE_SYSTEM_VERSION but for the host system instead of
the target system when cross compiling.
CMAKE_HOST_UNIX
True for UNIX and UNIX like operating systems.
Set to true when the host system is UNIX or UNIX like (i.e. APPLE and
CYGWIN).
CMAKE_HOST_WIN32
True on windows systems, including win64.
Set to true when the host system is Windows and on cygwin.
CMAKE_LIBRARY_ARCHITECTURE
Target architecture library directory name, if detected.
This is the value of CMAKE_<lang>_LIBRARY_ARCHITECTURE as detected for
one of the enabled languages.
CMAKE_LIBRARY_ARCHITECTURE_REGEX
Regex matching possible target architecture library directory names.
This is used to detect CMAKE_<lang>_LIBRARY_ARCHITECTURE from the
implicit linker search path by matching the <arch> name.
CMAKE_OBJECT_PATH_MAX
Maximum object file full-path length allowed by native build tools.
CMake computes for every source file an object file name that is
unique to the source file and deterministic with respect to the full
path to the source file. This allows multiple source files in a
target to share the same name if they lie in different directories
without rebuilding when one is added or removed. However, it can
produce long full paths in a few cases, so CMake shortens the path
using a hashing scheme when the full path to an object file exceeds a
limit. CMake has a built-in limit for each platform that is
sufficient for common tools, but some native tools may have a lower
limit. This variable may be set to specify the limit explicitly. The
value must be an integer no less than 128.
CMAKE_SYSTEM
Name of system cmake is compiling for.
This variable is the composite of CMAKE_SYSTEM_NAME and
CMAKE_SYSTEM_VERSION, like this
${CMAKE_SYSTEM_NAME}-${CMAKE_SYSTEM_VERSION}. If CMAKE_SYSTEM_VERSION
is not set, then CMAKE_SYSTEM is the same as CMAKE_SYSTEM_NAME.
CMAKE_SYSTEM_NAME
Name of the OS CMake is building for.
This is the name of the operating system on which CMake is targeting.
On systems that have the uname command, this variable is set to the
output of uname -s. Linux, Windows, and Darwin for Mac OSX are the
values found on the big three operating systems.
CMAKE_SYSTEM_PROCESSOR
The name of the CPU CMake is building for.
On systems that support uname, this variable is set to the output of
uname -p, on windows it is set to the value of the environment
variable PROCESSOR_ARCHITECTURE
CMAKE_SYSTEM_VERSION
OS version CMake is building for.
A numeric version string for the system, on systems that support
uname, this variable is set to the output of uname -r. On other
systems this is set to major-minor version numbers.
CYGWIN
True for cygwin.
Set to true when using CYGWIN.
MSVC
True when using Microsoft Visual C
Set to true when the compiler is some version of Microsoft Visual C.
MSVC80
True when using Microsoft Visual C 8.0
Set to true when the compiler is version 8.0 of Microsoft Visual C.
MSVC_IDE
True when using the Microsoft Visual C IDE
Set to true when the target platform is the Microsoft Visual C IDE, as
opposed to the command line compiler.
MSVC_VERSION
The version of Microsoft Visual C/C++ being used if any.
Known version numbers are:
1200 = VS 6.0
1300 = VS 7.0
1310 = VS 7.1
1400 = VS 8.0
1500 = VS 9.0
1600 = VS 10.0
UNIX
True for UNIX and UNIX like operating systems.
Set to true when the target system is UNIX or UNIX like (i.e. APPLE
and CYGWIN).
WIN32
True on windows systems, including win64.
Set to true when the target system is Windows.
XCODE_VERSION
Version of Xcode (Xcode generator only).
Under the Xcode generator, this is the version of Xcode as specified
in "Xcode.app/Contents/version.plist" (such as "3.1.2").
------------------------------------------------------------------------------
Variables common to all CPack generators
CPACK_BINARY_<GENNAME>
CPack generated options for binary generators
The CPack.cmake module generates (when CPACK_GENERATOR is not set) a
set of CMake options (see CMake option command) which may then be used
to select the CPack generator(s) to be used when launching the package
target.
CPACK_CMAKE_GENERATOR
What CMake generator should be used if the project is CMake project.
Defaults to the value of CMAKE_GENERATOR few users will want to change
this setting.
CPACK_CREATE_DESKTOP_LINKS
List of desktop links to create
CPACK_GENERATOR
List of CPack generators to use
If not specified, CPack will create a set of options
CPACK_BINARY_<GENNAME> (e.g., CPACK_BINARY_NSIS) allowing the user to
enable/disable individual generators. This variable may be used on
the command line as well as in:
cpack -D CPACK_GENERATOR="ZIP;TGZ" /path/to/build/tree
CPACK_INCLUDE_TOPLEVEL_DIRECTORY
Boolean toggle to include/exclude top level directory.
When preparing a package CPack installs the item under the so-called
top level directory. The purpose of is to include (set to 1 or ON or
TRUE) the top level directory in the package or not (set to 0 or OFF
or FALSE).
Each CPack generator as a built-in default value for this variable.
E.g. Archive generators (ZIP, TGZ, ...) includes the top level
whereas RPM or DEB don't. The user may override the default value byt
setting this variable.
There is a similar variable
CPACK_COMPONENT_INCLUDE_TOPLEVEL_DIRECTORYwhich may be used to
override the behavior for the componentpackaging case which may have
different default value forhistorical (now backward compatibility)
reason.
CPACK_INSTALLED_DIRECTORIES
Extra directories to install
CPACK_INSTALL_CMAKE_PROJECTS
List of four values that specify what project to install.
The four values are: Build directory, Project Name, Project Component,
Directory. If omitted, CPack will build an installer that installers
everything.
CPACK_INSTALL_COMMANDS
Extra commands to install components
CPACK_INSTALL_SCRIPT
Extra CMake script provided by the user.
If set this CMake script will be executed by CPack during its local
[CPack-private] installation which is done right before packaging the
files. The script is not called by e.g.: make install.
CPACK_MONOLITHIC_INSTALL
Disables the component-based installation mechanism.
When set the component specification is ignored and all installed
items are put in a single "MONOLITHIC" package. Some CPack generators
do monolithic packaging by default and may be asked to do component
packaging by setting CPACK_<GENNAME>_COMPONENT_INSTALL to 1/TRUE.
CPACK_OUTPUT_CONFIG_FILE
The name of the CPack binary configuration file.
This file is the CPack configuration generated by the CPack module for
binary installers. Defaults to CPackConfig.cmake.
CPACK_PACKAGE_DESCRIPTION_FILE
A text file used to describe the project.
Used, for example, the introduction screen of a CPack-generated
Windows installer to describe the project.
CPACK_PACKAGE_DESCRIPTION_SUMMARY
Short description of the project (only a few words).
CPACK_PACKAGE_EXECUTABLES
Lists each of the executables and associated text label to be used to
create Start Menu shortcuts.
For example, setting this to the list ccmake;CMake will create a
shortcut named "CMake" that will execute the installed executable
ccmake. Not all CPack generators use it (at least NSIS and OSXX11
do).
CPACK_PACKAGE_FILE_NAME
The name of the package file to generate, not including the extension.
For example, cmake-2.6.1-Linux-i686. The default value is
${CPACK_PACKAGE_NAME}-${CPACK_PACKAGE_VERSION}-${CPACK_SYSTEM_NAME}.
CPACK_PACKAGE_ICON
A branding image that will be displayed inside the installer (used by
GUI installers).
CPACK_PACKAGE_INSTALL_DIRECTORY
Installation directory on the target system.
This may be used by some CPack generators like NSIS to create an
installation directory e.g., "CMake 2.5" below the installation
prefix. All installed element will be put inside this directory.
CPACK_PACKAGE_INSTALL_REGISTRY_KEY
Registry key used when installing this project.
This is only used by installer for Windows.
CPACK_PACKAGE_NAME
The name of the package (or application)
If not specified, defaults to the project name.
CPACK_PACKAGE_VENDOR
The name of the package vendor
(e.g., "Kitware").
CPACK_PACKAGE_VERSION
Package full version, used internally
By default, this is built from CPACK_PACKAGE_VERSION_MAJOR,
CPACK_PACKAGE_VERSION_MINOR, and CPACK_PACKAGE_VERSION_PATCH.
CPACK_PACKAGE_VERSION_MAJOR
Package major Version
CPACK_PACKAGE_VERSION_MINOR
Package minor Version
CPACK_PACKAGE_VERSION_PATCH
Package patch Version
CPACK_PACKAGING_INSTALL_PREFIX
The prefix used in the built package.
Each CPack generator has a default value (like /usr). This default
value may be overwritten from the CMakeLists.txt or the cpack command
line by setting an alternative value.
e.g. set(CPACK_PACKAGING_INSTALL_PREFIX "/opt")
This is not the same purpose as CMAKE_INSTALL_PREFIX which is used
when installing from the build tree without building a package.
CPACK_PROJECT_CONFIG_FILE
CPack-time project CPack configuration file.
This file included at cpack time, once per generator after CPack has
set CPACK_GENERATOR to the actual generator being used. It allows
per-generator setting of CPACK_* variables at cpack time.
CPACK_RESOURCE_FILE_LICENSE
License to be embedded in the installer
It will typically be displayed to the user by the produced installer
(often with an explicit "Accept" button, for graphical installers)
prior to installation. This license file is NOT added to installed
file but is used by some CPack generators like NSIS. If you want to
install a license file (may be the same as this one) along with your
project you must add an appropriate CMake INSTALL command in your
CMakeLists.txt.
CPACK_RESOURCE_FILE_README
ReadMe file to be embedded in the installer
It typically describes in some detail the purpose of the project
during the installation. Not all CPack generators uses this file.
CPACK_RESOURCE_FILE_WELCOME
Welcome file to be embedded in the installer.
It welcomes users to this installer. Typically used in the graphical
installers on Windows and Mac OS X.
CPACK_SET_DESTDIR
Boolean toggle to make CPack use DESTDIR mechanism when packaging.
DESTDIR means DESTination DIRectory. It is commonly used by makefile
users in order to install software at non-default location. It is a
basic relocation mechanism. It is usually invoked like this:
make DESTDIR=/home/john install
which will install the concerned software using the installation
prefix, e.g. "/usr/local" prepended with the DESTDIR value which
finally gives "/home/john/usr/local". When preparing a package, CPack
first installs the items to be packaged in a local (to the build tree)
directory by using the same DESTDIR mechanism. Nevertheless, if
CPACK_SET_DESTDIR is set then CPack will set DESTDIR before doing the
local install. The most noticeable difference is that without
CPACK_SET_DESTDIR, CPack uses CPACK_PACKAGING_INSTALL_PREFIX as a
prefix whereas with CPACK_SET_DESTDIR set, CPack will use
CMAKE_INSTALL_PREFIX as a prefix.
Manually setting CPACK_SET_DESTDIR may help (or simply be necessary)
if some install rules uses absolute DESTINATION (see CMake INSTALL
command). However, starting with CPack/CMake 2.8.3 RPM and DEB
installers tries to handle DESTDIR automatically so that it is seldom
necessary for the user to set it.
CPACK_SOURCE_GENERATOR
List of generators used for the source packages.
As with CPACK_GENERATOR, if this is not specified then CPack will
create a set of options (e.g., CPACK_SOURCE_ZIP) allowing users to
select which packages will be generated.
CPACK_SOURCE_IGNORE_FILES
Pattern of files in the source tree that won't be packaged when
building a source package.
This is a list of regular expression patterns (that must be properly
escaped), e.g., /CVS/;/\\.svn/;\\.swp$;\\.#;/#;.*~;cscope.*
CPACK_SOURCE_OUTPUT_CONFIG_FILE
The name of the CPack source configuration file.
This file is the CPack configuration generated by the CPack module for
source installers. Defaults to CPackSourceConfig.cmake.
CPACK_SOURCE_PACKAGE_FILE_NAME
The name of the source package
For example cmake-2.6.1.
CPACK_SOURCE_STRIP_FILES
List of files in the source tree that will be stripped.
Starting with CMake 2.6.0 CPACK_SOURCE_STRIP_FILES will be a boolean
variable which enables stripping of all files (a list of files
evaluates to TRUE in CMake, so this change is compatible).
CPACK_STRIP_FILES
List of files to be stripped
Starting with CMake 2.6.0 CPACK_STRIP_FILES will be a boolean variable
which enables stripping of all files (a list of files evaluates to
TRUE in CMake, so this change is compatible).
CPACK_SYSTEM_NAME
System name, defaults to the value of ${CMAKE_SYSTEM_NAME}.
CPACK_TOPLEVEL_TAG
Directory for the installed files
------------------------------------------------------------------------------
Variables concerning CPack Components
CPACK_<GENNAME>_COMPONENT_INSTALL
Enable/Disable component install for CPack generator <GENNAME>.
Each CPack Generator (RPM, DEB, ARCHIVE, NSIS, DMG, etc...) has a legacy
default behavior. e.g. RPM builds monolithic whereas NSIS builds component.
One can change the default behavior by setting this variable to 0/1 or OFF/ON.
CPACK_COMPONENTS_ALL
The list of component to install
The default value of this variable is computed by CPack
and contains all components defined by the project. The
user may set it to only include the specified components.
CPACK_COMPONENTS_GROUPING
Specify how components are grouped for multi-package component-aware
CPack generators.
Some generators like RPM or ARCHIVE family (TGZ, ZIP, ...) generates several
packages files when asked for component packaging. They group the component
differently depending on the value of this variable:
- ONE_PER_GROUP (default): creates one package file per component group
- ALL_COMPONENTS_IN_ONE : creates a single package with all (requested) component
- IGNORE : creates one package per component, i.e. IGNORE component group
One can specify different grouping for different CPack generator by using
a CPACK_PROJECT_CONFIG_FILE.
CPACK_COMPONENT_<compName>_DEPENDS
The dependencies (list of components) on which this component depends.
CPACK_COMPONENT_<compName>_DESCRIPTION
The description of a component
CPACK_COMPONENT_<compName>_DISPLAY_NAME
The name to be displayed for a component
CPACK_COMPONENT_<compName>_GROUP
The group of a component
CPACK_COMPONENT_<compName>_REQUIRED
True is this component is required
------------------------------------------------------------------------------
Variables for Languages
CMAKE_<LANG>_ARCHIVE_APPEND
Rule variable to append to a static archive.
This is a rule variable that tells CMake how to append to a static
archive. It is used in place of CMAKE_<LANG>_CREATE_STATIC_LIBRARY on
some platforms in order to support large object counts. See also
CMAKE_<LANG>_ARCHIVE_CREATE and CMAKE_<LANG>_ARCHIVE_FINISH.
CMAKE_<LANG>_ARCHIVE_CREATE
Rule variable to create a new static archive.
This is a rule variable that tells CMake how to create a static
archive. It is used in place of CMAKE_<LANG>_CREATE_STATIC_LIBRARY on
some platforms in order to support large object counts. See also
CMAKE_<LANG>_ARCHIVE_APPEND and CMAKE_<LANG>_ARCHIVE_FINISH.
CMAKE_<LANG>_ARCHIVE_FINISH
Rule variable to finish an existing static archive.
This is a rule variable that tells CMake how to finish a static
archive. It is used in place of CMAKE_<LANG>_CREATE_STATIC_LIBRARY on
some platforms in order to support large object counts. See also
CMAKE_<LANG>_ARCHIVE_CREATE and CMAKE_<LANG>_ARCHIVE_APPEND.
CMAKE_<LANG>_COMPILER
The full path to the compiler for LANG.
This is the command that will be used as the <LANG> compiler. Once
set, you can not change this variable.
CMAKE_<LANG>_COMPILER_ABI
An internal variable subject to change.
This is used in determining the compiler ABI and is subject to change.
CMAKE_<LANG>_COMPILER_ID
An internal variable subject to change.
This is used in determining the compiler and is subject to change.
CMAKE_<LANG>_COMPILER_LOADED
Defined to true if the language is enabled.
When language <LANG> is enabled by project() or enable_language() this
variable is defined to 1.
CMAKE_<LANG>_COMPILER_VERSION
An internal variable subject to change.
Compiler version in major[.minor[.patch[.tweak]]] format. This
variable is reserved for internal use by CMake and is not guaranteed
to be set.
CMAKE_<LANG>_COMPILE_OBJECT
Rule variable to compile a single object file.
This is a rule variable that tells CMake how to compile a single
object file for for the language <LANG>.
CMAKE_<LANG>_CREATE_SHARED_LIBRARY
Rule variable to create a shared library.
This is a rule variable that tells CMake how to create a shared
library for the language <LANG>.
CMAKE_<LANG>_CREATE_SHARED_MODULE
Rule variable to create a shared module.
This is a rule variable that tells CMake how to create a shared
library for the language <LANG>.
CMAKE_<LANG>_CREATE_STATIC_LIBRARY
Rule variable to create a static library.
This is a rule variable that tells CMake how to create a static
library for the language <LANG>.
CMAKE_<LANG>_FLAGS_DEBUG
Flags for Debug build type or configuration.
<LANG> flags used when CMAKE_BUILD_TYPE is Debug.
CMAKE_<LANG>_FLAGS_MINSIZEREL
Flags for MinSizeRel build type or configuration.
<LANG> flags used when CMAKE_BUILD_TYPE is MinSizeRel.Short for
minimum size release.
CMAKE_<LANG>_FLAGS_RELEASE
Flags for Release build type or configuration.
<LANG> flags used when CMAKE_BUILD_TYPE is Release
CMAKE_<LANG>_FLAGS_RELWITHDEBINFO
Flags for RelWithDebInfo type or configuration.
<LANG> flags used when CMAKE_BUILD_TYPE is RelWithDebInfo. Short for
Release With Debug Information.
CMAKE_<LANG>_IGNORE_EXTENSIONS
File extensions that should be ignored by the build.
This is a list of file extensions that may be part of a project for a
given language but are not compiled.
CMAKE_<LANG>_IMPLICIT_INCLUDE_DIRECTORIES
Directories implicitly searched by the compiler for header files.
CMake does not explicitly specify these directories on compiler
command lines for language <LANG>. This prevents system include
directories from being treated as user include directories on some
compilers.
CMAKE_<LANG>_IMPLICIT_LINK_DIRECTORIES
Implicit linker search path detected for language <LANG>.
Compilers typically pass directories containing language runtime
libraries and default library search paths when they invoke a linker.
These paths are implicit linker search directories for the compiler's
language. CMake automatically detects these directories for each
language and reports the results in this variable.
CMAKE_<LANG>_IMPLICIT_LINK_LIBRARIES
Implicit link libraries and flags detected for language <LANG>.
Compilers typically pass language runtime library names and other
flags when they invoke a linker. These flags are implicit link
options for the compiler's language. CMake automatically detects
these libraries and flags for each language and reports the results in
this variable.
CMAKE_<LANG>_LIBRARY_ARCHITECTURE
Target architecture library directory name detected for <lang>.
If the <lang> compiler passes to the linker an architecture-specific
system library search directory such as <prefix>/lib/<arch> this
variable contains the <arch> name if/as detected by CMake.
CMAKE_<LANG>_LINKER_PREFERENCE
Preference value for linker language selection.
The "linker language" for executable, shared library, and module
targets is the language whose compiler will invoke the linker. The
LINKER_LANGUAGE target property sets the language explicitly.
Otherwise, the linker language is that whose linker preference value
is highest among languages compiled and linked into the target. See
also the CMAKE_<LANG>_LINKER_PREFERENCE_PROPAGATES variable.
CMAKE_<LANG>_LINKER_PREFERENCE_PROPAGATES
True if CMAKE_<LANG>_LINKER_PREFERENCE propagates across targets.
This is used when CMake selects a linker language for a target.
Languages compiled directly into the target are always considered. A
language compiled into static libraries linked by the target is
considered if this variable is true.
CMAKE_<LANG>_LINK_EXECUTABLE
Rule variable to link and executable.
Rule variable to link and executable for the given language.
CMAKE_<LANG>_OUTPUT_EXTENSION
Extension for the output of a compile for a single file.
This is the extension for an object file for the given <LANG>. For
example .obj for C on Windows.
CMAKE_<LANG>_PLATFORM_ID
An internal variable subject to change.
This is used in determining the platform and is subject to change.
CMAKE_<LANG>_SIZEOF_DATA_PTR
Size of pointer-to-data types for language <LANG>.
This holds the size (in bytes) of pointer-to-data types in the target
platform ABI. It is defined for languages C and CXX (C++).
CMAKE_<LANG>_SOURCE_FILE_EXTENSIONS
Extensions of source files for the given language.
This is the list of extensions for a given languages source files.
CMAKE_COMPILER_IS_GNU<LANG>
True if the compiler is GNU.
If the selected <LANG> compiler is the GNU compiler then this is TRUE,
if not it is FALSE.
CMAKE_Fortran_MODDIR_DEFAULT
Fortran default module output directory.
Most Fortran compilers write .mod files to the current working
directory. For those that do not, this is set to "." and used when
the Fortran_MODULE_DIRECTORY target property is not set.
CMAKE_Fortran_MODDIR_FLAG
Fortran flag for module output directory.
This stores the flag needed to pass the value of the
Fortran_MODULE_DIRECTORY target property to the compiler.
CMAKE_Fortran_MODOUT_FLAG
Fortran flag to enable module output.
Most Fortran compilers write .mod files out by default. For others,
this stores the flag needed to enable module output.
CMAKE_INTERNAL_PLATFORM_ABI
An internal variable subject to change.
This is used in determining the compiler ABI and is subject to change.
CMAKE_USER_MAKE_RULES_OVERRIDE_<LANG>
Specify a CMake file that overrides platform information for <LANG>.
This is a language-specific version of CMAKE_USER_MAKE_RULES_OVERRIDE
loaded only when enabling language <LANG>.
------------------------------------------------------------------------------
Variables specific to CPack Bundle generator
CPACK_BUNDLE_ICON
Path to an OSX icon file that will be used as the icon for the
generated bundle.
This is the icon that appears in the OSX finder for the bundle, and in
the OSX dock when the bundle is opened. Required.
CPACK_BUNDLE_NAME
The name of the generated bundle
This appears in the OSX finder as the bundle name. Required.
CPACK_BUNDLE_PLIST
Path to an OSX plist file that will be used for the generated bundle.
This assumes that the caller has generated or specified their own
Info.plist file. Required.
CPACK_BUNDLE_STARTUP_COMMAND
Path to a startup script
This is a path to an executable or script that will be run whenever an
end-user double-clicks the generated bundle in the OSX Finder.
Optional.
------------------------------------------------------------------------------
Variables specific to CPack Cygwin generator
CPACK_CYGWIN_BUILD_SCRIPT
The Cygwin build script
FIXME: This documentation is incomplete.
CPACK_CYGWIN_PATCH_FILE
The Cygwin patch file
FIXME: This documentation is incomplete.
CPACK_CYGWIN_PATCH_NUMBER
The Cygwin patch number
FIXME: This documentation is incomplete.
------------------------------------------------------------------------------
Variables specific to CPack Debian (DEB) generator
CPACK_DEBIAN_PACKAGE_ARCHITECTURE
Mandatory : YES
Default : Output of dpkg --print-architecture (or i386 if dpkg is not found)
The debian package architecture
CPACK_DEBIAN_PACKAGE_BREAKS
Mandatory : NO
Default : -
see http://www.debian.org/doc/debian-policy/ch-relationships.html#s-binarydeps
When one binary package declares that it breaks another, dpkg will refuse to allow the
package which declares Breaks be installed unless the broken package is deconfigured first,
and it will refuse to allow the broken package to be reconfigured.
CPACK_DEBIAN_PACKAGE_CONFLICTS
Mandatory : NO
Default : -
see http://www.debian.org/doc/debian-policy/ch-relationships.html#s-binarydeps
When one binary package declares a conflict with another using a Conflicts field,
dpkg will refuse to allow them to be installed on the system at the same time.
CPACK_DEBIAN_PACKAGE_DEBUG
Mandatory : NO
Default : -
May be set when invoking cpack in order to trace debug information
during CPackDeb run.
CPACK_DEBIAN_PACKAGE_DEPENDS
Mandatory : NO
Default : -
May be used to set deb dependencies.
CPACK_DEBIAN_PACKAGE_DESCRIPTION
Mandatory : YES
Default : CPACK_PACKAGE_DESCRIPTION_SUMMARY
The debian package description
CPACK_DEBIAN_PACKAGE_ENHANCES
Mandatory : NO
Default : -
see http://www.debian.org/doc/debian-policy/ch-relationships.html#s-binarydeps
This field is similar to Suggests but works in the opposite direction.
It is used to declare that a package can enhance the functionality of another package.
CPACK_DEBIAN_PACKAGE_HOMEPAGE
Mandatory : NO
Default : -
The URL of the web site for this package
CPACK_DEBIAN_PACKAGE_MAINTAINER
Mandatory : YES
Default : CPACK_PACKAGE_CONTACT
The debian package maintainer
CPACK_DEBIAN_PACKAGE_NAME
Mandatory : YES
Default : CPACK_PACKAGE_NAME (lower case)
The debian package summary
CPACK_DEBIAN_PACKAGE_PREDEPENDS
Mandatory : NO
Default : -
see http://www.debian.org/doc/debian-policy/ch-relationships.html#s-binarydeps
This field is like Depends, except that it also forces dpkg to complete installation of
the packages named before even starting the installation of the package which declares
the pre-dependency.
CPACK_DEBIAN_PACKAGE_PRIORITY
Mandatory : YES
Default : 'optional'
The debian package priority
CPACK_DEBIAN_PACKAGE_PROVIDES
Mandatory : NO
Default : -
see http://www.debian.org/doc/debian-policy/ch-relationships.html#s-binarydeps
A virtual package is one which appears in the Provides control field of another package.
CPACK_DEBIAN_PACKAGE_REPLACES
Mandatory : NO
Default : -
see http://www.debian.org/doc/debian-policy/ch-relationships.html#s-binarydeps
Packages can declare in their control file that they should overwrite
files in certain other packages, or completely replace other packages.
CPACK_DEBIAN_PACKAGE_SECTION
Mandatory : YES
Default : 'devel'
The debian package section
CPACK_DEBIAN_PACKAGE_SHLIBDEPS
Mandatory : NO
Default : OFF
May be set to ON in order to use dpkg-shlibdeps to generate
better package dependency list.
You may need set CMAKE_INSTALL_RPATH toi appropriate value
if you use this feature, because if you don't dpkg-shlibdeps
may fail to find your own shared libs.
See http://www.cmake.org/Wiki/CMake_RPATH_handling.
CPACK_DEBIAN_PACKAGE_VERSION
Mandatory : YES
Default : CPACK_PACKAGE_VERSION
The debian package version
------------------------------------------------------------------------------
Variables specific to CPack DragNDrop generator
CPACK_COMMAND_HDIUTIL
Path to the hdiutil(1) command used to operate on disk image files on
Mac OS X.
This variable can be used to override the automatically detected
command (or specify its location if the auto-detection fails to find
it.)
CPACK_COMMAND_REZ
Path to the Rez(1) command used to compile resources on Mac OS X.
This variable can be used to override the automatically detected
command (or specify its location if the auto-detection fails to find
it.)
CPACK_COMMAND_SETFILE
Path to the SetFile(1) command used to set extended attributes on
files and directories on Mac OS X.
This variable can be used to override the automatically detected
command (or specify its location if the auto-detection fails to find
it.)
CPACK_DMG_BACKGROUND_IMAGE
Path to a background image file
This file will be used as the background for the Finder Window when
the disk image is opened. By default no background image is set. The
background image is applied after applying the custom .DS_Store file.
CPACK_DMG_DS_STORE
Path to a custom DS_Store file
This .DS_Store file e.g. can be used to specify the Finder window
position/geometry and layout (such as hidden toolbars, placement of
the icons etc.). This file has to be generated by the Finder (either
manually or through OSA-script) using a normal folder from which the
.DS_Store file can then be extracted.
CPACK_DMG_FORMAT
The disk image format
Common values are UDRO (UDIF read-only), UDZO (UDIF zlib-compressed)
or UDBZ (UDIF bzip2-compressed). Refer to hdiutil(1) for more
information on other available formats.
CPACK_DMG_VOLUME_NAME
The volume name of the generated disk image.
Defaults to CPACK_PACKAGE_FILE_NAME.
------------------------------------------------------------------------------
Variables specific to CPack NSIS generator
CPACK_NSIS_COMPRESSOR
The arguments that will be passed to the NSIS SetCompressor command.
CPACK_NSIS_CONTACT
Contact information for questions and comments about the installation
process.
CPACK_NSIS_CREATE_ICONS_EXTRA
Additional NSIS commands for creating start menu shortcuts.
CPACK_NSIS_DELETE_ICONS_EXTRA
Additional NSIS commands to uninstall start menu shortcuts.
CPACK_NSIS_DISPLAY_NAME
The display name string that appears in the Windows Add/Remove Program
control panel
CPACK_NSIS_EXECUTABLES_DIRECTORY
Creating NSIS start menu links assumes that they are in 'bin' unless
this variable is set.
For example, you would set this to 'exec' if your executables are
in an exec directory.
CPACK_NSIS_EXTRA_INSTALL_COMMANDS
Extra NSIS commands that will be added to the install Section.
CPACK_NSIS_EXTRA_UNINSTALL_COMMANDS
Extra NSIS commands that will be added to the uninstall Section.
CPACK_NSIS_HELP_LINK
URL to a web site providing assistance in installing your application.
CPACK_NSIS_INSTALLED_ICON_NAME
A path to the executable that contains the installer icon.
CPACK_NSIS_INSTALLER_MUI_ICON_CODE
undocumented
CPACK_NSIS_INSTALL_ROOT
The default installation directory presented to the end user by the
NSIS installer is under this root dir.
The full directory presented to the end user is:
${CPACK_NSIS_INSTALL_ROOT}/${CPACK_PACKAGE_INSTALL_DIRECTORY}
CPACK_NSIS_MENU_LINKS
Specify links in [application] menu
This should contain a list of pair "link" "link name". The link
may be an URL or a path relative to installation prefix.
Like:
set(CPACK_NSIS_MENU_LINKS
"doc/cmake-@CMake_VERSION_MAJOR@.@CMake_VERSION_MINOR@/cmake.html" "CMake Help"
"http://www.cmake.org" "CMake Web Site")
CPACK_NSIS_MODIFY_PATH
Modify PATH toggle
If this is set to "ON", then an extra page
will appear in the installer that will allow the user to choose
whether the program directory should be added to the system PATH
variable.
CPACK_NSIS_MUI_FINISHPAGE_RUN
Specify an executable to add an option to run on the finish page of
the NSIS installer.
CPACK_NSIS_MUI_ICON
An icon filename
The name of a *.ico file used as the main icon for the generated
install program.
CPACK_NSIS_MUI_UNIICON
An icon filename
The name of a *.ico file used as the main icon for the generated
uninstall program.
CPACK_NSIS_PACKAGE_NAME
The title displayed at the top of the installer.
CPACK_NSIS_URL_INFO_ABOUT
URL to a web site providing more information about your application.
------------------------------------------------------------------------------
Variables specific to CPack PackageMaker generator
CPACK_OSX_PACKAGE_VERSION
The version of Mac OS X that the resulting PackageMaker archive should
be compatible with.
Different versions of Mac OS X support different features. For
example, CPack can only build component-based installers for Mac OS X
10.4 or newer, and can only build installers that download component
son-the-fly for Mac OS X 10.5 or newer. If left blank, this value
will be set to the minimum version of Mac OS X that supports the
requested features. Set this variable to some value (e.g., 10.4) only
if you want to guarantee that your installer will work on that version
of Mac OS X, and don't mind missing extra features available in the
installer shipping with later versions of Mac OS X.
------------------------------------------------------------------------------
Variables specific to CPack RPM generator
CPACK_RPM_CHANGELOG_FILE
RPM changelog file
Mandatory : NO
Default : -
May be used to embed a changelog in the spec file.
The refered file will be read and directly put after the %changelog
section.
CPACK_RPM_COMPRESSION_TYPE
RPM compression type
Mandatory : NO
Default : -
May be used to override RPM compression type to be used
to build the RPM. For example some Linux distribution now default
to lzma or xz compression whereas older cannot use such RPM.
Using this one can enforce compression type to be used.
Possible value are: lzma, xz, bzip2 and gzip.
CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE
Spec file template
Mandatory : NO
Default : -
If set CPack will generate a template for USER specified binary
spec file and stop with an error. For example launch CPack like this
cpack -D CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE=1 -G RPM
The user may then use this file in order to hand-craft is own
binary spec file which may be used with CPACK_RPM_USER_BINARY_SPECFILE.
CPACK_RPM_PACKAGE_ARCHITECTURE
The RPM package architecture
Mandatory : NO
Default : -
This may be set to "noarch" if you
know you are building a noarch package.
CPACK_RPM_PACKAGE_DEBUG
Toggle CPackRPM debug output
Mandatory : NO
Default : -
May be set when invoking cpack in order to trace debug information
during CPack RPM run. For example you may launch CPack like this
cpack -D CPACK_RPM_PACKAGE_DEBUG=1 -G RPM
CPACK_RPM_PACKAGE_DESCRIPTION
RPM package description
Mandatory : YES
Default : CPACK_PACKAGE_DESCRIPTION_FILE if set or "no package description available"
CPACK_RPM_PACKAGE_GROUP
The RPM package group
Mandatory : YES
Default : "unknown"
CPACK_RPM_PACKAGE_LICENSE
The RPM package license policy
Mandatory : YES
Default : "unknown"
CPACK_RPM_PACKAGE_NAME
The RPM package name
Mandatory : YES
Default : CPACK_PACKAGE_NAME
CPACK_RPM_PACKAGE_OBSOLETES
RPM spec obsoletes field
Mandatory : NO
Default : -
May be used to set RPM packages that are obsoleted by this one.
CPACK_RPM_PACKAGE_PROVIDES
RPM spec provides field
Mandatory : NO
Default : -
May be used to set RPM dependencies (provides).
The provided package list of an RPM file could be printed with
rpm -qp --provides file.rpm
CPACK_RPM_PACKAGE_RELEASE
The RPM package release
Mandatory : YES
Default : 1
This is the numbering of the RPM package
itself, i.e. the version of the packaging and not the version of the
content (see CPACK_RPM_PACKAGE_VERSION). One may change the default
value if the previous packaging was buggy and/or you want to put here
a fancy Linux distro specific numbering.
CPACK_RPM_PACKAGE_RELOCATABLE
build a relocatable RPM
Mandatory : NO
Default : CPACK_PACKAGE_RELOCATABLE
If this variable is set to TRUE or ON CPackRPM will try
to build a relocatable RPM package. A relocatable RPM may
be installed using rpm --prefix or --relocate in order to
install it at an alternate place see rpm(8).
Note that currently this may fail if CPACK_SET_DESTDIR is set to ON.
If CPACK_SET_DESTDIR is set then you will get a warning message
but if there is file installed with absolute path you'll get
unexpected behavior.
CPACK_RPM_PACKAGE_REQUIRES
RPM spec requires field
Mandatory : NO
Default : -
May be used to set RPM dependencies (requires).
Note that you must enclose the complete requires string between quotes,
for example:
set(CPACK_RPM_PACKAGE_REQUIRES "python >= 2.5.0, cmake >= 2.8")
The required package list of an RPM file could be printed with
rpm -qp --requires file.rpm
CPACK_RPM_PACKAGE_SUGGESTS
RPM spec suggest field
Mandatory : NO
Default : -
May be used to set weak RPM dependencies (suggests).
Note that you must enclose the complete requires string between quotes.
CPACK_RPM_PACKAGE_SUMMARY
The RPM package summary
Mandatory : YES
Default : CPACK_PACKAGE_DESCRIPTION_SUMMARY
CPACK_RPM_PACKAGE_URL
The projects URL
Mandatory : NO
Default : -
CPACK_RPM_PACKAGE_VENDOR
The RPM package vendor
Mandatory : YES
Default : CPACK_PACKAGE_VENDOR if set or "unknown"
CPACK_RPM_PACKAGE_VERSION
The RPM package version
Mandatory : YES
Default : CPACK_PACKAGE_VERSION
CPACK_RPM_POST_INSTALL_SCRIPT_FILE
CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE
Mandatory : NO
Default : -
May be used to embed a post (un)installation script in the spec file.
The refered script file(s) will be read and directly
put after the %post or %postun section
If CPACK_RPM_COMPONENT_INSTALL is set to ON the (un)install script for
each component can be overridden with
CPACK_RPM_<COMPONENT>_POST_INSTALL_SCRIPT_FILE and
CPACK_RPM_<COMPONENT>_POST_UNINSTALL_SCRIPT_FILE
One may verify which scriptlet has been included with
rpm -qp --scripts package.rpm
CPACK_RPM_PRE_INSTALL_SCRIPT_FILE
CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE
Mandatory : NO
Default : -
May be used to embed a pre (un)installation script in the spec file.
The refered script file(s) will be read and directly
put after the %pre or %preun section
If CPACK_RPM_COMPONENT_INSTALL is set to ON the (un)install script for
each component can be overridden with
CPACK_RPM_<COMPONENT>_PRE_INSTALL_SCRIPT_FILE and
CPACK_RPM_<COMPONENT>_PRE_UNINSTALL_SCRIPT_FILE
One may verify which scriptlet has been included with
rpm -qp --scripts package.rpm
CPACK_RPM_SPEC_INSTALL_POST
[deprecated]
Mandatory : NO
Default : -
This way of specifying post-install script is deprecated use
CPACK_RPM_POST_INSTALL_SCRIPT_FILE
May be used to set an RPM post-install command inside the spec file.
For example setting it to "/bin/true" may be used to prevent
rpmbuild to strip binaries.
CPACK_RPM_SPEC_MORE_DEFINE
RPM extended spec definitions lines
Mandatory : NO
Default : -
May be used to add any %define lines to the generated spec file.
CPACK_RPM_USER_BINARY_SPECFILE
A user provided spec file
Mandatory : NO
Default : -
May be set by the user in order to specify a USER binary spec file
to be used by CPackRPM instead of generating the file.
The specified file will be processed by CONFIGURE_FILE( @ONLY).
CPACK_RPM_USER_FILELIST
CPACK_RPM_<COMPONENT>_USER_FILELIST
Mandatory : NO
Default : -
May be used to explicitly specify %(<directive>) file line
in the spec file. Like %config(noreplace) or any other directive
that be found in the %files section. Since CPackRPM is generating
the list of files (and directories) the user specified files of
the CPACK_RPM_<COMPONENT>_USER_FILELIST list will be removed from the generated list.
------------------------------------------------------------------------------
Variables that Control the Build
CMAKE_<CONFIG>_POSTFIX
Default filename postfix for libraries under configuration <CONFIG>.
When a non-executable target is created its <CONFIG>_POSTFIX target
property is initialized with the value of this variable if it is set.
CMAKE_ARCHIVE_OUTPUT_DIRECTORY
Where to put all the ARCHIVE targets when built.
This variable is used to initialize the ARCHIVE_OUTPUT_DIRECTORY
property on all the targets. See that target property for additional
information.
CMAKE_AUTOMOC
Whether to handle moc automatically for Qt targets.
This variable is used to initialize the AUTOMOC property on all the
targets. See that target property for additional information.
CMAKE_AUTOMOC_MOC_OPTIONS
Additional options for moc when using automoc (see CMAKE_AUTOMOC).
This variable is used to initialize the AUTOMOC_MOC_OPTIONS property
on all the targets. See that target property for additional
information.
CMAKE_BUILD_WITH_INSTALL_RPATH
Use the install path for the RPATH
Normally CMake uses the build tree for the RPATH when building
executables etc on systems that use RPATH. When the software is
installed the executables etc are relinked by CMake to have the
install RPATH. If this variable is set to true then the software is
always built with the install path for the RPATH and does not need to
be relinked when installed.
CMAKE_DEBUG_POSTFIX
See variable CMAKE_<CONFIG>_POSTFIX.
This variable is a special case of the more-general
CMAKE_<CONFIG>_POSTFIX variable for the DEBUG configuration.
CMAKE_EXE_LINKER_FLAGS
Linker flags used to create executables.
Flags used by the linker when creating an executable.
CMAKE_EXE_LINKER_FLAGS_[CMAKE_BUILD_TYPE]
Flag used when linking an executable.
Same as CMAKE_C_FLAGS_* but used by the linker when creating
executables.
CMAKE_Fortran_FORMAT
Set to FIXED or FREE to indicate the Fortran source layout.
This variable is used to initialize the Fortran_FORMAT property on all
the targets. See that target property for additional information.
CMAKE_Fortran_MODULE_DIRECTORY
Fortran module output directory.
This variable is used to initialize the Fortran_MODULE_DIRECTORY
property on all the targets. See that target property for additional
information.
CMAKE_GNUtoMS
Convert GNU import libraries (.dll.a) to MS format (.lib).
This variable is used to initialize the GNUtoMS property on targets
when they are created. See that target property for additional
information.
CMAKE_INCLUDE_CURRENT_DIR
Automatically add the current source- and build directories to the
include path.
If this variable is enabled, CMake automatically adds in each
directory ${CMAKE_CURRENT_SOURCE_DIR} and ${CMAKE_CURRENT_BINARY_DIR}
to the include path for this directory. These additional include
directories do not propagate down to subdirectories. This is useful
mainly for out-of-source builds, where files generated into the build
tree are included by files located in the source tree.
By default CMAKE_INCLUDE_CURRENT_DIR is OFF.
CMAKE_INSTALL_NAME_DIR
Mac OSX directory name for installed targets.
CMAKE_INSTALL_NAME_DIR is used to initialize the INSTALL_NAME_DIR
property on all targets. See that target property for more
information.
CMAKE_INSTALL_RPATH
The rpath to use for installed targets.
A semicolon-separated list specifying the rpath to use in installed
targets (for platforms that support it). This is used to initialize
the target property INSTALL_RPATH for all targets.
CMAKE_INSTALL_RPATH_USE_LINK_PATH
Add paths to linker search and installed rpath.
CMAKE_INSTALL_RPATH_USE_LINK_PATH is a boolean that if set to true
will append directories in the linker search path and outside the
project to the INSTALL_RPATH. This is used to initialize the target
property INSTALL_RPATH_USE_LINK_PATH for all targets.
CMAKE_LIBRARY_OUTPUT_DIRECTORY
Where to put all the LIBRARY targets when built.
This variable is used to initialize the LIBRARY_OUTPUT_DIRECTORY
property on all the targets. See that target property for additional
information.
CMAKE_LIBRARY_PATH_FLAG
The flag used to add a library search path to a compiler.
The flag used to specify a library directory to the compiler. On most
compilers this is "-L".
CMAKE_LINK_DEF_FILE_FLAG
Linker flag used to specify a .def file for dll creation.
The flag used to add a .def file when creating a dll on Windows, this
is only defined on Windows.
CMAKE_LINK_INTERFACE_LIBRARIES
Default value for LINK_INTERFACE_LIBRARIES of targets.
This variable is used to initialize the LINK_INTERFACE_LIBRARIES
property on all the targets. See that target property for additional
information.
CMAKE_LINK_LIBRARY_FILE_FLAG
Flag used to link a library specified by a path to its file.
The flag used before a library file path is given to the linker. This
is needed only on very few platforms.
CMAKE_LINK_LIBRARY_FLAG
Flag used to link a library into an executable.
The flag used to specify a library to link to an executable. On most
compilers this is "-l".
CMAKE_MACOSX_BUNDLE
Default value for MACOSX_BUNDLE of targets.
This variable is used to initialize the MACOSX_BUNDLE property on all
the targets. See that target property for additional information.
CMAKE_NO_BUILTIN_CHRPATH
Do not use the builtin ELF editor to fix RPATHs on installation.
When an ELF binary needs to have a different RPATH after installation
than it does in the build tree, CMake uses a builtin editor to change
the RPATH in the installed copy. If this variable is set to true then
CMake will relink the binary before installation instead of using its
builtin editor.
CMAKE_RUNTIME_OUTPUT_DIRECTORY
Where to put all the RUNTIME targets when built.
This variable is used to initialize the RUNTIME_OUTPUT_DIRECTORY
property on all the targets. See that target property for additional
information.
CMAKE_SKIP_BUILD_RPATH
Do not include RPATHs in the build tree.
Normally CMake uses the build tree for the RPATH when building
executables etc on systems that use RPATH. When the software is
installed the executables etc are relinked by CMake to have the
install RPATH. If this variable is set to true then the software is
always built with no RPATH.
CMAKE_SKIP_INSTALL_RPATH
Do not include RPATHs in the install tree.
Normally CMake uses the build tree for the RPATH when building
executables etc on systems that use RPATH. When the software is
installed the executables etc are relinked by CMake to have the
install RPATH. If this variable is set to true then the software is
always installed without RPATH, even if RPATH is enabled when
building. This can be useful for example to allow running tests from
the build directory with RPATH enabled before the installation step.
To omit RPATH in both the build and install steps, use
CMAKE_SKIP_RPATH instead.
CMAKE_TRY_COMPILE_CONFIGURATION
Build configuration used for try_compile and try_run projects.
Projects built by try_compile and try_run are built synchronously
during the CMake configuration step. Therefore a specific build
configuration must be chosen even if the generated build system
supports multiple configurations.
CMAKE_USE_RELATIVE_PATHS
Use relative paths (May not work!).
If this is set to TRUE, then the CMake will use relative paths between
the source and binary tree. This option does not work for more
complicated projects, and relative paths are used when possible. In
general, it is not possible to move CMake generated makefiles to a
different location regardless of the value of this variable.
CMAKE_WIN32_EXECUTABLE
Default value for WIN32_EXECUTABLE of targets.
This variable is used to initialize the WIN32_EXECUTABLE property on
all the targets. See that target property for additional information.
EXECUTABLE_OUTPUT_PATH
Old executable location variable.
The target property RUNTIME_OUTPUT_DIRECTORY supercedes this variable
for a target if it is set. Executable targets are otherwise placed in
this directory.
LIBRARY_OUTPUT_PATH
Old library location variable.
The target properties ARCHIVE_OUTPUT_DIRECTORY,
LIBRARY_OUTPUT_DIRECTORY, and RUNTIME_OUTPUT_DIRECTORY supercede this
variable for a target if they are set. Library targets are otherwise
placed in this directory.
------------------------------------------------------------------------------
Variables that Provide Information
CMAKE_AR
Name of archiving tool for static libraries.
This specifies name of the program that creates archive or static
libraries.
CMAKE_ARGC
Number of command line arguments passed to CMake in script mode.
When run in -P script mode, CMake sets this variable to the number of
command line arguments. See also CMAKE_ARGV0, 1, 2 ...
CMAKE_ARGV0
Command line argument passed to CMake in script mode.
When run in -P script mode, CMake sets this variable to the first
command line argument. It then also sets CMAKE_ARGV1, CMAKE_ARGV2,
... and so on, up to the number of command line arguments given. See
also CMAKE_ARGC.
CMAKE_BINARY_DIR
The path to the top level of the build tree.
This is the full path to the top level of the current CMake build
tree. For an in-source build, this would be the same as
CMAKE_SOURCE_DIR.
CMAKE_BUILD_TOOL
Tool used for the actual build process.
This variable is set to the program that will be needed to build the
output of CMake. If the generator selected was Visual Studio 6, the
CMAKE_BUILD_TOOL will be set to msdev, for Unix makefiles it will be
set to make or gmake, and for Visual Studio 7 it set to devenv. For
Nmake Makefiles the value is nmake. This can be useful for adding
special flags and commands based on the final build environment.
CMAKE_CACHEFILE_DIR
The directory with the CMakeCache.txt file.
This is the full path to the directory that has the CMakeCache.txt
file in it. This is the same as CMAKE_BINARY_DIR.
CMAKE_CACHE_MAJOR_VERSION
Major version of CMake used to create the CMakeCache.txt file
This is stores the major version of CMake used to write a CMake cache
file. It is only different when a different version of CMake is run
on a previously created cache file.
CMAKE_CACHE_MINOR_VERSION
Minor version of CMake used to create the CMakeCache.txt file
This is stores the minor version of CMake used to write a CMake cache
file. It is only different when a different version of CMake is run
on a previously created cache file.
CMAKE_CACHE_PATCH_VERSION
Patch version of CMake used to create the CMakeCache.txt file
This is stores the patch version of CMake used to write a CMake cache
file. It is only different when a different version of CMake is run
on a previously created cache file.
CMAKE_CFG_INTDIR
Build-time reference to per-configuration output subdirectory.
For native build systems supporting multiple configurations in the
build tree (such as Visual Studio and Xcode), the value is a reference
to a build-time variable specifying the name of the per-configuration
output subdirectory. On Makefile generators this evaluates to "."
because there is only one configuration in a build tree. Example
values:
$(IntDir) = Visual Studio 6
$(OutDir) = Visual Studio 7, 8, 9
$(Configuration) = Visual Studio 10
$(CONFIGURATION) = Xcode
. = Make-based tools
Since these values are evaluated by the native build system, this
variable is suitable only for use in command lines that will be
evaluated at build time. Example of intended usage:
add_executable(mytool mytool.c)
add_custom_command(
OUTPUT out.txt
COMMAND ${CMAKE_CURRENT_BINARY_DIR}/${CMAKE_CFG_INTDIR}/mytool
${CMAKE_CURRENT_SOURCE_DIR}/in.txt out.txt
DEPENDS mytool in.txt
)
add_custom_target(drive ALL DEPENDS out.txt)
Note that CMAKE_CFG_INTDIR is no longer necessary for this purpose but
has been left for compatibility with existing projects. Instead
add_custom_command() recognizes executable target names in its COMMAND
option, so "${CMAKE_CURRENT_BINARY_DIR}/${CMAKE_CFG_INTDIR}/mytool"
can be replaced by just "mytool".
This variable is read-only. Setting it is undefined behavior. In
multi-configuration build systems the value of this variable is passed
as the value of preprocessor symbol "CMAKE_INTDIR" to the compilation
of all source files.
CMAKE_COMMAND
The full path to the cmake executable.
This is the full path to the CMake executable cmake which is useful
from custom commands that want to use the cmake -E option for portable
system commands. (e.g. /usr/local/bin/cmake
CMAKE_CROSSCOMPILING
Is CMake currently cross compiling.
This variable will be set to true by CMake if CMake is cross
compiling. Specifically if the build platform is different from the
target platform.
CMAKE_CTEST_COMMAND
Full path to ctest command installed with cmake.
This is the full path to the CTest executable ctest which is useful
from custom commands that want to use the cmake -E option for portable
system commands.
CMAKE_CURRENT_BINARY_DIR
The path to the binary directory currently being processed.
This the full path to the build directory that is currently being
processed by cmake. Each directory added by add_subdirectory will
create a binary directory in the build tree, and as it is being
processed this variable will be set. For in-source builds this is the
current source directory being processed.
CMAKE_CURRENT_LIST_DIR
Full directory of the listfile currently being processed.
As CMake processes the listfiles in your project this variable will
always be set to the directory where the listfile which is currently
being processed (CMAKE_CURRENT_LIST_FILE) is located. The value has
dynamic scope. When CMake starts processing commands in a source file
it sets this variable to the directory where this file is located.
When CMake finishes processing commands from the file it restores the
previous value. Therefore the value of the variable inside a macro or
function is the directory of the file invoking the bottom-most entry
on the call stack, not the directory of the file containing the macro
or function definition.
See also CMAKE_CURRENT_LIST_FILE.
CMAKE_CURRENT_LIST_FILE
Full path to the listfile currently being processed.
As CMake processes the listfiles in your project this variable will
always be set to the one currently being processed. The value has
dynamic scope. When CMake starts processing commands in a source file
it sets this variable to the location of the file. When CMake
finishes processing commands from the file it restores the previous
value. Therefore the value of the variable inside a macro or function
is the file invoking the bottom-most entry on the call stack, not the
file containing the macro or function definition.
See also CMAKE_PARENT_LIST_FILE.
CMAKE_CURRENT_LIST_LINE
The line number of the current file being processed.
This is the line number of the file currently being processed by
cmake.
CMAKE_CURRENT_SOURCE_DIR
The path to the source directory currently being processed.
This the full path to the source directory that is currently being
processed by cmake.
CMAKE_DL_LIBS
Name of library containing dlopen and dlcose.
The name of the library that has dlopen and dlclose in it, usually
-ldl on most UNIX machines.
CMAKE_EDIT_COMMAND
Full path to cmake-gui or ccmake.
This is the full path to the CMake executable that can graphically
edit the cache. For example, cmake-gui, ccmake, or cmake -i.
CMAKE_EXECUTABLE_SUFFIX
The suffix for executables on this platform.
The suffix to use for the end of an executable if any, .exe on
Windows.
CMAKE_EXECUTABLE_SUFFIX_<LANG> overrides this for language <LANG>.
CMAKE_EXTRA_GENERATOR
The extra generator used to build the project.
When using the Eclipse, CodeBlocks or KDevelop generators, CMake
generates Makefiles (CMAKE_GENERATOR) and additionally project files
for the respective IDE. This IDE project file generator is stored in
CMAKE_EXTRA_GENERATOR (e.g. "Eclipse CDT4").
CMAKE_EXTRA_SHARED_LIBRARY_SUFFIXES
Additional suffixes for shared libraries.
Extensions for shared libraries other than that specified by
CMAKE_SHARED_LIBRARY_SUFFIX, if any. CMake uses this to recognize
external shared library files during analysis of libraries linked by a
target.
CMAKE_GENERATOR
The generator used to build the project.
The name of the generator that is being used to generate the build
files. (e.g. "Unix Makefiles", "Visual Studio 6", etc.)
CMAKE_HOME_DIRECTORY
Path to top of source tree.
This is the path to the top level of the source tree.
CMAKE_IMPORT_LIBRARY_PREFIX
The prefix for import libraries that you link to.
The prefix to use for the name of an import library if used on this
platform.
CMAKE_IMPORT_LIBRARY_PREFIX_<LANG> overrides this for language <LANG>.
CMAKE_IMPORT_LIBRARY_SUFFIX
The suffix for import libraries that you link to.
The suffix to use for the end of an import library if used on this
platform.
CMAKE_IMPORT_LIBRARY_SUFFIX_<LANG> overrides this for language <LANG>.
CMAKE_LINK_LIBRARY_SUFFIX
The suffix for libraries that you link to.
The suffix to use for the end of a library, .lib on Windows.
CMAKE_MAJOR_VERSION
The Major version of cmake (i.e. the 2 in 2.X.X)
This specifies the major version of the CMake executable being run.
CMAKE_MAKE_PROGRAM
See CMAKE_BUILD_TOOL.
This variable is around for backwards compatibility, see
CMAKE_BUILD_TOOL.
CMAKE_MINOR_VERSION
The Minor version of cmake (i.e. the 4 in X.4.X).
This specifies the minor version of the CMake executable being run.
CMAKE_PARENT_LIST_FILE
Full path to the parent listfile of the one currently being processed.
As CMake processes the listfiles in your project this variable will
always be set to the listfile that included or somehow invoked the one
currently being processed. See also CMAKE_CURRENT_LIST_FILE.
CMAKE_PATCH_VERSION
The patch version of cmake (i.e. the 3 in X.X.3).
This specifies the patch version of the CMake executable being run.
CMAKE_PROJECT_NAME
The name of the current project.
This specifies name of the current project from the closest inherited
PROJECT command.
CMAKE_RANLIB
Name of randomizing tool for static libraries.
This specifies name of the program that randomizes libraries on UNIX,
not used on Windows, but may be present.
CMAKE_ROOT
Install directory for running cmake.
This is the install root for the running CMake and the Modules
directory can be found here. This is commonly used in this format:
${CMAKE_ROOT}/Modules
CMAKE_SCRIPT_MODE_FILE
Full path to the -P script file currently being processed.
When run in -P script mode, CMake sets this variable to the full path
of the script file. When run to configure a CMakeLists.txt file, this
variable is not set.
CMAKE_SHARED_LIBRARY_PREFIX
The prefix for shared libraries that you link to.
The prefix to use for the name of a shared library, lib on UNIX.
CMAKE_SHARED_LIBRARY_PREFIX_<LANG> overrides this for language <LANG>.
CMAKE_SHARED_LIBRARY_SUFFIX
The suffix for shared libraries that you link to.
The suffix to use for the end of a shared library, .dll on Windows.
CMAKE_SHARED_LIBRARY_SUFFIX_<LANG> overrides this for language <LANG>.
CMAKE_SHARED_MODULE_PREFIX
The prefix for loadable modules that you link to.
The prefix to use for the name of a loadable module on this platform.
CMAKE_SHARED_MODULE_PREFIX_<LANG> overrides this for language <LANG>.
CMAKE_SHARED_MODULE_SUFFIX
The suffix for shared libraries that you link to.
The suffix to use for the end of a loadable module on this platform
CMAKE_SHARED_MODULE_SUFFIX_<LANG> overrides this for language <LANG>.
CMAKE_SIZEOF_VOID_P
Size of a void pointer.
This is set to the size of a pointer on the machine, and is determined
by a try compile. If a 64 bit size is found, then the library search
path is modified to look for 64 bit libraries first.
CMAKE_SKIP_RPATH
If true, do not add run time path information.
If this is set to TRUE, then the rpath information is not added to
compiled executables. The default is to add rpath information if the
platform supports it. This allows for easy running from the build
tree. To omit RPATHin the install step, but not the build step, use
CMAKE_SKIP_INSTALL_RPATH instead.
CMAKE_SOURCE_DIR
The path to the top level of the source tree.
This is the full path to the top level of the current CMake source
tree. For an in-source build, this would be the same as
CMAKE_BINARY_DIR.
CMAKE_STANDARD_LIBRARIES
Libraries linked into every executable and shared library.
This is the list of libraries that are linked into all executables and
libraries.
CMAKE_STATIC_LIBRARY_PREFIX
The prefix for static libraries that you link to.
The prefix to use for the name of a static library, lib on UNIX.
CMAKE_STATIC_LIBRARY_PREFIX_<LANG> overrides this for language <LANG>.
CMAKE_STATIC_LIBRARY_SUFFIX
The suffix for static libraries that you link to.
The suffix to use for the end of a static library, .lib on Windows.
CMAKE_STATIC_LIBRARY_SUFFIX_<LANG> overrides this for language <LANG>.
CMAKE_TWEAK_VERSION
The tweak version of cmake (i.e. the 1 in X.X.X.1).
This specifies the tweak version of the CMake executable being run.
Releases use tweak < 20000000 and development versions use the date
format CCYYMMDD for the tweak level.
CMAKE_USING_VC_FREE_TOOLS
True if free visual studio tools being used.
This is set to true if the compiler is Visual Studio free tools.
CMAKE_VERBOSE_MAKEFILE
Create verbose makefiles if on.
This variable defaults to false. You can set this variable to true to
make CMake produce verbose makefiles that show each command line as it
is used.
CMAKE_VERSION
The full version of cmake in major.minor.patch[.tweak[-id]] format.
This specifies the full version of the CMake executable being run.
This variable is defined by versions 2.6.3 and higher. See variables
CMAKE_MAJOR_VERSION, CMAKE_MINOR_VERSION, CMAKE_PATCH_VERSION, and
CMAKE_TWEAK_VERSION for individual version components. The [-id]
component appears in non-release versions and may be arbitrary text.
PROJECT_BINARY_DIR
Full path to build directory for project.
This is the binary directory of the most recent PROJECT command.
PROJECT_NAME
Name of the project given to the project command.
This is the name given to the most recent PROJECT command.
PROJECT_SOURCE_DIR
Top level source directory for the current project.
This is the source directory of the most recent PROJECT command.
[Project name]_BINARY_DIR
Top level binary directory for the named project.
A variable is created with the name used in the PROJECT command, and
is the binary directory for the project. This can be useful when
SUBDIR is used to connect several projects.
[Project name]_SOURCE_DIR
Top level source directory for the named project.
A variable is created with the name used in the PROJECT command, and
is the source directory for the project. This can be useful when
add_subdirectory is used to connect several projects.
------------------------------------------------------------------------------
Copyright
Copyright 2000-2009 Kitware, Inc., Insight Software Consortium. All rights
reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
Neither the names of Kitware, Inc., the Insight Software Consortium, nor the
names of their contributors may be used to endorse or promote products
derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
------------------------------------------------------------------------------
See Also
The following resources are available to get help using CMake:
Home Page
http://www.cmake.org
The primary starting point for learning about CMake.
Frequently Asked Questions
http://www.cmake.org/Wiki/CMake_FAQ
A Wiki is provided containing answers to frequently asked questions.
Online Documentation
http://www.cmake.org/HTML/Documentation.html
Links to available documentation may be found on this web page.
Mailing List
http://www.cmake.org/HTML/MailingLists.html
For help and discussion about using cmake, a mailing list is provided
at cmake@cmake.org. The list is member-post-only but one may sign up
on the CMake web page. Please first read the full documentation at
http://www.cmake.org before posting questions to the list.
Summary of helpful links:
Home: http://www.cmake.org
Docs: http://www.cmake.org/HTML/Documentation.html
Mail: http://www.cmake.org/HTML/MailingLists.html
FAQ: http://www.cmake.org/Wiki/CMake_FAQ
