Beginning ParaView: Difference between revisions

From KitwarePublic
Jump to navigationJump to search
No edit summary
 
(20 intermediate revisions by the same user not shown)
Line 7: Line 7:


=A simple example=
=A simple example=
*Start ParaView.  
==Start ParaView==  
**On Windows, go to '''Start → All Programs → ParaView 5.x.x →''' and click '''ParaView'''
**On Windows, go to '''Start → All Programs → ParaView 5.x.x →''' and click '''ParaView'''
**On Mac, in the finder, go to the ParaView directory (in the Application directory where you installed ParaView) and click on “paraview”.
**On Mac, in the finder, go to the ParaView directory (in the Application directory where you installed ParaView) and click on “paraview”.
**On Linux go into the ParaView directory (where you downloaded ParaView) and type “paraview”.
**On Linux go into the ParaView directory (where you downloaded ParaView) and type “paraview”.


==Startup Screen==
** The '''Startup Screen''' includes two important links.  Both of these links can also be found from the '''Help''' menu.  They are '''Getting Started Guide''' and '''Example Visualizations'''.
[[Image:beginning_paraview_StartupScreen.jpg]]
==Getting Started Guide==
**The '''Getting Started Guide''' is a two page mini tutorial that shows fundamental ParaView usage.
[[Image:beginning_paraview_GettingStartedGuide.jpg]]
**'''Example Visualizations''' provide three finished visualizations.  You can then play around with a ParaView pipeline. 
[[Image:beginning_paraview_ExampleVisualizations.jpg]]
==Help Menu==
**The '''Help''' menu looks like this:
[[Image:beginning_paraview_HelpMenu.jpg]]
==Open can.ex2==
*Open can.ex2.   
*Open can.ex2.   
**can.ex2 is one of the datasets in the training data, found on the web site under “Installing ParaView”.
**can.ex2 is one of the datasets included with ParaView in the Examples folder.
**In ParaView, '''File → Open'''.  Go to can.ex2, and select it.  Click OK.
**In ParaView, '''File → Open'''.  In the upper left corner, there is a folder called Examples.  Go into this folder.  Select can.ex2.  Click OK.
**Under the '''Properties''' tab, select all '''Variables''' using the square to the left of the label Variables.
**Under the '''Properties''' tab, select all '''Variables''' using the square to the left of the label Variables.
**Click '''Apply'''.
**Click '''Apply'''.
Line 27: Line 51:


   
   
[[Image:beginning_paraview_2New.jpg|800px]]
[[Image:beginning_paraview_2New.jpg|1000px]]




*Lets move the 3d object.  Grab the can using the '''left''' mouse button.  Try the '''center''' button.  Try again with the '''right''' button.  Try all three again holding down the '''<SHFT>''' key. Try again holding down the X, Y and Z keys.  
*Lets move the 3d object.  Grab the can using the '''left''' mouse button.  Try the '''center''' button.  Try again with the '''right''' button.  Try all three again holding down the '''<SHFT>''' key. Try again holding down the X, Y and Z keys.  
*Place your mouse on a corner of the can. Now, hold the '''<CTRL>''' key down, and move the mouse up and down.  You can zoom into and out of that location.


*Now the screen looks like this:
*Now the screen looks like this:


[[Image:beginning_paraview_2BNew.jpg|800px]]
[[Image:beginning_paraview_2BNew.jpg|1000px]]


*Notice that the can dataset is being painted in two colors -  
*Notice that the can dataset is being painted in two colors -  
Line 58: Line 83:
**Click the '''Rescale to Data Range''' button.
**Click the '''Rescale to Data Range''' button.
**Rewind using the animation control furthest left arrow, then click the single right arrow again.
**Rewind using the animation control furthest left arrow, then click the single right arrow again.
==Getting back GUI components==
**If you accidentally close the Properties tab, the Information tab or the Pipeline tab, open them again from the '''View''' menu.
**If you accidentally undock one of the tabs, just drag it back into place, wait for a gray shadow to appear, and drop it into place.




[[Image:beginning_paraview_ViewB.jpg]]
   
   


Line 70: Line 100:


=Acknowledgements=
=Acknowledgements=
Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy’s National Nuclear Security Administration under contract DE-AC04-94AL85000.
Sandia National Laboratories is a multi-mission laboratory managed and operated by National Technology and Engineering Solutions of Sandia, LLC., a wholly owned subsidiary of Honeywell International, Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA-0003525.

Latest revision as of 20:21, 25 October 2017

Introduction

This tutorial will describe how to start ParaView, find information and help about ParaView, and describe some of the more important controls used by ParaView.

The ParaView web site is located at http://www.paraview.org. New versions of ParaView can be found here, along with different tutorials and advice. ParaView versions include 32 and 64 bit versions of Linux, Windows and Mac OS X. Training (practice) data is also found on the paraview.org website. These tutorials are found here: http://www.paraview.org/Wiki/SNL_ParaView_4_Tutorials

ParaView now has an integrated help. It is found under the menu item Help→ Help.

A simple example

Start ParaView

    • On Windows, go to Start → All Programs → ParaView 5.x.x → and click ParaView
    • On Mac, in the finder, go to the ParaView directory (in the Application directory where you installed ParaView) and click on “paraview”.
    • On Linux go into the ParaView directory (where you downloaded ParaView) and type “paraview”.

Startup Screen

    • The Startup Screen includes two important links. Both of these links can also be found from the Help menu. They are Getting Started Guide and Example Visualizations.

Beginning paraview StartupScreen.jpg


Getting Started Guide

    • The Getting Started Guide is a two page mini tutorial that shows fundamental ParaView usage.

Beginning paraview GettingStartedGuide.jpg


    • Example Visualizations provide three finished visualizations. You can then play around with a ParaView pipeline.

Beginning paraview ExampleVisualizations.jpg


Help Menu

    • The Help menu looks like this:

Beginning paraview HelpMenu.jpg


Open can.ex2

  • Open can.ex2.
    • can.ex2 is one of the datasets included with ParaView in the Examples folder.
    • In ParaView, File → Open. In the upper left corner, there is a folder called Examples. Go into this folder. Select can.ex2. Click OK.
    • Under the Properties tab, select all Variables using the square to the left of the label Variables.
    • Click Apply.


  • Turn off the node variables for ACCL. Since any variable that is selected takes up memory, and since some datasets are huge, often the user will only read in the data that is needed for a run.
    • Click ACCL, turning the check box OFF.
    • Apply.
  • The screen should now look like this. (The square will show up as red, since ParaView defaults to coloring by block, and the block we are seeing is red.) You are looking at the bottom of the plate that the can is sitting on.


Beginning paraview 2New.jpg


  • Lets move the 3d object. Grab the can using the left mouse button. Try the center button. Try again with the right button. Try all three again holding down the <SHFT> key. Try again holding down the X, Y and Z keys.
  • Place your mouse on a corner of the can. Now, hold the <CTRL> key down, and move the mouse up and down. You can zoom into and out of that location.
  • Now the screen looks like this:

Beginning paraview 2BNew.jpg

  • Notice that the can dataset is being painted in two colors -
  • To change the representation, change Surface to Wireframe (right below Help). Then, change it to Surface with Edges. Finally, turn it back to Surface.
  • Change the variable used for color. Change this from Solid Color to Displacement (Point DISPL). (This is found just below the Sources menu.) Everything should go blue.

Beginning paraview 3.jpg


  • Animate the can one frame. Right above the window of the can are animation controls. Click the right arrow with a bar to its left once. The plate turns red.


Beginning paraview 4.png


    • WHAT IS HAPPENING: The can dataset has displacement information in it. We are actually running the plate into the can, and the whole object is moving.
    • TIP: Our color map is not set correctly. It needs to be set over the whole range of displacement, so that it grades from blue to red.
    • WARNING: Very, very large data can take a long time to process. Don’t animate your data unless you have to with very large datasets.
    • Click the single right arrow, running to the end of the simulation.
    • Click the Rescale to Data Range button.
    • Rewind using the animation control furthest left arrow, then click the single right arrow again.

Getting back GUI components

    • If you accidentally close the Properties tab, the Information tab or the Pipeline tab, open them again from the View menu.
    • If you accidentally undock one of the tabs, just drag it back into place, wait for a gray shadow to appear, and drop it into place.


Beginning paraview ViewB.jpg


Where do you go next?

  • Filters tutorial.
  • GUI tutorial.
  • Client server tutorial.
  • Making 2d plots tutorial.
  • Making Powerpoint slides tutorial.

Acknowledgements

Sandia National Laboratories is a multi-mission laboratory managed and operated by National Technology and Engineering Solutions of Sandia, LLC., a wholly owned subsidiary of Honeywell International, Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA-0003525.