Computational Fluid Dynamics: Difference between revisions

From KitwarePublic
Jump to navigationJump to search
No edit summary
No edit summary
Line 186: Line 186:


==Volume Rendering==
==Volume Rendering==
We are going to paint the fluid by volume rendered temperature.  To give context, we are also going to extract the exterior surface, and clip the disk_out_ref in half.  We will paint this exterior surface black.
*'''File → Open → Examples → disk_out_ref.exo.'''.  On the '''Properties''' tab, click '''Apply'''.
*'''Filters → Extract Surface'''.  '''Apply'''.
*'''Filters → Clip'''.  Deselect '''Invert'''.  '''Apply'''.
*'''Solid Color'''.  Color the clipped surface '''black'''.
*Select '''disk_out_ref.exo''' in the '''Pipeline Browser'''. Paint by '''temp'''.  '''Volume Render'''.  In the '''Color Editor''', change '''presets''' (looks like a folder with a heart) to be '''Black Body Radiation'''.
[[Image:cfd_volume_rendering.png|1000px]]

Revision as of 02:35, 25 November 2021

Visualizing Computational Fluid Dynamics

This tutorial shows common visualization techniques for cfd datasets. We will be using the dataset disk_out_ref.exo, found in Paraview under File/ Open/ Examples. It has a vector field in it called V.

Slices

  • File → Open → Examples → disk_out_ref.exo.. On the Properties tab, click Apply.
  • +X
  • Filters → Common → Slice. Apply. Unselect the Show Plane.
  • Color by: v.
  • In the pipeline browser, select disk_out_ref.exo
  • Filters → Common → Slice. Y Normal. Apply. Unselect the Show Plane.
  • Color by: pres.
  • View → Color Map Editor → Presets (the little envelope with a heart) → Turbo.
  • With the mouse, rotate the slices around so you can see both surfaces.


Cfd slices2.png


Stream Tracers - lines and tubes

  • File → Open → Examples → disk_out_ref.exo.. On the Properties tab, click Apply.
  • +X
  • Filters → Common → Stream Tracer. v. Seed Type: Point Cloud. Uncheck Show Sphere. Apply.
  • Color by: v.

Lines don't color as nicely as surfaces. Lets add a tube filter around each streamline.

  • Filters → Search. Type Tube. Apply.

Now, we want to know which directions the particles are moving. We will use a glyph filter. Note we place the glyph filter on the streamline, not the tube.

  • Select StreamTracer in the Pipeline Browser.
  • Filters → Common → Glyph. Glyph Type: Cone. Orientation Array: v. Scale Array: v . Very Important - Scale Factor select the recycle button to the right. Apply.
  • Color by: temp.
  • View → Color Map Editor → Presets (the little envelope with a heart) → Black Body Radiation.
  • Reset


Cfd streamtracer1.png


Glyphs perpendicular to a slice

  • File → Open → Examples → disk_out_ref.exo.. On the Properties tab, click Apply.
  • +X

Lets create a half slice. This will be used as the seed plane for glyphs.

  • Filters → Common → Slice. Origin 0, 0, 5. Uncheck Show Plane. Apply.
  • Filters → Common → Clip. Uncheck Show Plane. Apply.

Now, apply glyphs.

  • Filters → Common → Glyph. Glyph Type: Arrow. Orientation Array: v. Scale Array: v . Very Important - Scale Factor select the recycle button to the right. .5X. .5X. Apply.
  • Color by: v. Change Magnitude to Z.

Let's put these glyphs back into context by showing the original dataset.

  • Select disk_out_ref.exo in the Pipeline Browser. Representation: wireframe. On the Properties tab, change Opacity to 0.3.
  • Use the mouse to zoom into the glyph vectors.


Cfd slice glyph1.png


Flow in a fluid

To show a velocity profile we need to sample the dataset with a line, and then create glyphs off of this line. This can be done using a trick in ParaView, i.e., the Plot over Line filter. Note that a Resample to Line filter will be added in ParaView 5.11 or so.

  • File → Open → Examples → disk_out_ref.exo.. On the Properties tab, click Apply.

Lets sample over a line.

  • Filters → Data Analysis → Plot over Line. Y Axis. Change the Z component of Point1 and Point2 to 1. Change the Resolution to 40. Apply.
  • Close the LineChartView.
  • In the Pipeline Browser, turn visibility off for disk_out_ref.exo.

We now have a line sampled through the fluid. Lets calculate the negative Z component of V (so it goes the opposite direction on the line from V). That way we can have two profiles, one with V, and one with Vz.

  • Filters → Common → Calculator. Change Result to Vz. Use 0*iHat+0+jHat+-v_Z*kHat for the formula. Apply.

Now we want to create two Glyphs - one from the Calculator filter, and one directly from the Plot over Line filter.

  • The Calculator filter should still be highlighted in the Pipeline Browser.
  • Filters → Common → Glyph. Glyph Type: Arrow. Orientation Array: Vz. Scale Array: Vz . Very Important - Scale Factor select the recycle button to the right. .5X. .5X. Apply.
  • Click on the Color Editor icon. Change the color to Orange. Apply.
  • In the Pipeline Browser select the Plot over Line filter.
  • Filters → Common → Glyph. Glyph Type: Arrow. Orientation Array: v. Scale Array: v . Very Important - Scale Factor select the recycle button to the right. Apply.

Let's put these glyphs back into context by showing the original dataset.

  • Select disk_out_ref.exo in the Pipeline Browser. On the Properties tab, change Opacity to 0.3.

Just to create a nice image, I'm going to split the views horizontally, and show this visualization also from the side.


Cfd fluid velocity profile1.png


You can write the data sampled down the line to a .csv file, where you can post process it with tools such as Excel. Here is how to do it.

  • Select PlotOverLine in the Pipeline Browser.
  • Split screen vertical. Spreadsheet view.
  • Now, click on the Export Scene icon, and write the Spreadsheet down to a .csv file.


Cfd fluid velocity profile spreadsheet.png



2D plots through a fluid

  • File → Open → Examples → disk_out_ref.exo.. On the Properties tab, click Apply.
  • Filters → Data Analysis → Plot over Line. Y Axis. Change the Z component of Point1 and Point2 to 4. Apply.
  • In the Properties Tab, turn all variables off other than v_Z.
  • Click on the RenderView, the left view.
  • Select disk_out_ref.exo in the Pipeline Browser. On the Properties tab, change Opacity to 0.3.


Cfd 2d plots.png


Contours on a slice

  • File → Open → Examples → disk_out_ref.exo.. On the Properties tab, click Apply.
  • Filters → Slice. Apply.

We need the magnitude for the Contour filter.

  • Filters → Calculator. Result Array Name vMag. Formula mag(v). Apply.

Now, draw contours on the 2d slice.

  • Filters → Contour. Contour by vMag. Delete the Value, and create a new on using the Add a Range of Values icon. Apply.

Here is an example with additional streamlines, tubes and glyphs.


Cfd contours on slices.png


Gradient, Divergence, Vorticity and and Q Criterion

The Gradient filter (Advanced Properties tab) provides Gradient, Divergence, Vorticity and and Q Criterion. Here is am example, using disk_out_ref.exo.


Cfd gradient1.png



Probing a fluid

There are numerous ways to probe the cells and points of a fluid. One is with the Hover Points On and Hover Cells On icons just above the Renderview. Another is with Interactive Select Cells or Points On. Then, in the Find Data, turn on Cell or Point Labels. Yet another is with the Probe filter. Here is how to use the probe filter.

  • File → Open → Examples → disk_out_ref.exo.. On the Properties tab, click Apply.
  • +X
  • Filters → Common → Clip. Uncheck Show Plane. Apply.

The Probe filter works much better with Auto Apply turned on. This is the icon that looks like a tree growing out of a cube.

  • Auto Apply on
  • Filters → Data Analysis → Probe. Now, move over disk_out_ref.exo, updating the probed location with the p key.

The probed data will show in the Spreadsheet view.


Cfd probe1.png

Animating a static vector field

  • If you have a vector field in your data, you can animate a static dataset.
  • Our goal is to create a set of streamlines from a vector field, place points on this set of streamlines, and animate the point down the streamlines. We will also add glyphs to the streamline points.
  • Open disk_out_ref.exo. Apply.
  • Click the -X icon.
  • Stream tracer filter. (We are already streamtracing on V). Change Seed Type to Point Cloud. Optional - I changed the Opacity to 0.4. Apply.
  • Contour filter. Contour on IntegrationTime. Apply.
  • Glyph filter. Vectors V. No Scale Array. Scale 1. Glyph Mode All Points. Apply.
  • View/ Animation View.
  • Mode Sequence, No. Frames: 100.
  • Change the pulldown box next to the blue + to be Contour.
  • Click the blue +. Note it works better if you use 0 for the start.
  • Now, click the play button. In the pipeline browser, I also turned off visibility for the Contour filter.


Cfd animating static field.png


Volume Rendering

We are going to paint the fluid by volume rendered temperature. To give context, we are also going to extract the exterior surface, and clip the disk_out_ref in half. We will paint this exterior surface black.

  • File → Open → Examples → disk_out_ref.exo.. On the Properties tab, click Apply.
  • Filters → Extract Surface. Apply.
  • Filters → Clip. Deselect Invert. Apply.
  • Solid Color. Color the clipped surface black.
  • Select disk_out_ref.exo in the Pipeline Browser. Paint by temp. Volume Render. In the Color Editor, change presets (looks like a folder with a heart) to be Black Body Radiation.


Cfd volume rendering.png