Difference between revisions of "ITK/Cross Compiling"

From KitwarePublic
< ITK
Jump to navigationJump to search
Line 228: Line 228:
  
 
     make
 
     make
 +
 +
=== Dealing with TIFF bootstrapping ===
 +
 +
The build process of the TIFF library requires to first build an executable file called:
 +
 +
* mkg3states (renamed as itkmkg3states in ITK)
 +
 +
in order to generate a file called:
 +
 +
* tif_fax2sm.c
 +
 +
Since, during the cross-compilation process we generate executables that are for a different target architecture, the itkmkg3states file that we built, can't be run in the host to generate the tif_fax2sm.c file.
 +
 +
One way around this is to build the executable for the architecture of the host (e.g. taking it from any other local build of ITK in the host), and use it to replace the itkmkg3states file. Then using it to generate the .c file.
 +
 +
This can be done with the following commands:
 +
 +
* cd ITK_CROSS_COMPILED_BINARY_DIR/Modules/ThirdParty/TIFF/src/itktiff
 +
* cp ITK_NATIVE_BINARY_DIR/Modules/ThirdParty/TIFF/src/itktiff/itkmkg3states  .
 +
* ./itkmkg3states -c const ITK_CROSS_COMPILED_BINARY_DIR/Modules/ThirdParty/TIFF/src/itktiff/tif_fax3sm.c
 +
 +
Then it is possible to continue with the "make" process.
 +
 +
== Packaging ==
 +
 +
Once the build finishes, we can package ITK with the command:
 +
 +
*  make package
 +
 +
this will produce three files (that are independent of each other)
 +
 +
* ITK-4.4.0-Linux.sh
 +
* ITK-4.4.0-Linux.tar.gz
 +
* ITK-4.4.0-Linux.tar.Z

Revision as of 17:51, 27 December 2012

This page describes the procedure to follow when cross compiling ITK for another system.

In this page, we will refer to the system as:

  • Target System: The system where the executables are intended to run.
  • Build System: The system where the executables are built.

In Linux Host for Mac Target

In this particular case we illustrate

  • Target System = Mac
  • Build System = Linux

Major steps

  1. Build your tool chain in the build system
    • This is the set of compiler and linker that must be build in the build system, but will know how to generate code for the Target system.
  2. Create a TryRun ... file in the native system
    • This could be generated (as a skeleton) with the following commands

Building the ToolChain for Darwin

The following is a script developed by Johannes Schindelin (originally intended for FIJI)

Script for Building the Darwing Toolchain in Linux

Gathering Configuration settings in the target system

Following the advice of the CMake Wiki [1]

Put the following in a file called ToolChain.cmake

 # this one is important
 SET(CMAKE_SYSTEM_NAME Linux)
 #this one not so much
 SET(CMAKE_SYSTEM_VERSION 1)
 # specify the cross compiler
 SET(CMAKE_C_COMPILER   /usr/bin/gcc)
 SET(CMAKE_CXX_COMPILER /usr/bin/g++)
 # where is the target environment
 SET(CMAKE_FIND_ROOT_PATH  /usr)
 # search for programs in the build host directories
 SET(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER)
 # for libraries and headers in the target directories
 SET(CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY)
 SET(CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY)

and run it with CMake using the command (in an empty directory)

 cmake -DCMAKE_TOOLCHAIN_FILE=./ToolChain.cmake   ~/src/ITK

This will generate (among many other things) a File called

              TryRunResults.cmake

Then, manually populate, the values of each one of the fields.

The values to be put in this file can be taken from the CMakeCache.txt file of a native build in Darwin.


Finally, copy this file to the build system.

Using the Configuration in the Host

Now that you have copied the TryRunResuls.cmake file to the host system, you can use it as an initial cache for configuring the build.

Do the command in the build system.

   cmake -C ~/TryRunResults.cmake   ~/src/ITK

once the configuration is completed you can proceed to build ITK by simply typing

   make

The full process scripted

The process as a whole has been scripted in the file below

Script for configuring a cross-compilation build

Thanks to Johannes Schindelin for contributing the script.

In Linux Host for Windows Target

In this particular case we illustrate

  • Target System = Windows
  • Build System = Linux

Major steps

  1. Build your tool chain in the build system
    • This is the set of compiler and linker that must be build in the build system, but will know how to generate code for the Target system.
    • In this case we use MinGW as the tool chain
  2. Create a TryRun ... file in the native system
    • This could be generated (as a skeleton) with the following commands

Building the ToolChain for Windows

The following is a script developed by Johannes Schindelin (originally intended for FIJI)

Script for Building the Windows (MinGW) Toolchain in Linux

Gathering Configuration settings in the target system

Following the advice of the CMake Wiki [2]

Put the following in a file called ToolChain.cmake

 # this one is important
 SET(CMAKE_SYSTEM_NAME Linux)
 #this one not so much
 SET(CMAKE_SYSTEM_VERSION 1)
 # specify the cross compiler
 SET(CMAKE_C_COMPILER   /usr/bin/gcc)
 SET(CMAKE_CXX_COMPILER /usr/bin/g++)
 # where is the target environment
 SET(CMAKE_FIND_ROOT_PATH  /usr)
 # search for programs in the build host directories
 SET(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER)
 # for libraries and headers in the target directories
 SET(CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY)
 SET(CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY)

and run it with CMake using the command (in an empty directory)

 cmake -DCMAKE_TOOLCHAIN_FILE=./ToolChain.cmake   ~/src/ITK

This will generate (among many other things) a File called

              TryRunResults.cmake

Then, manually populate, the values of each one of the fields.

The values to be put in this file can be taken from the CMakeCache.txt file of a native build in Windows.


Finally, copy this file to the build system.

Using the Configuration in the Host

Now that you have copied the TryRunResuls.cmake file to the host system, you can use it as an initial cache for configuring the build.

Do the command in the build system.

   cmake -C ~/TryRunResults.cmake   ~/src/ITK

once the configuration is completed you can proceed to build ITK by simply typing

   make

In Linux Host for ARM Target

In this particular case we illustrate

  • Target System = Raspberry Pi (ARMv6)
  • Build System = Linux (Ubuntu 12.10)

Major steps

  1. Build your tool chain in the build system
    • This is the set of compiler and linker that must be build in the build system, but will know how to generate code for the Target system.
    • In this case we use crosstool-ng to build the tool chain
  2. Create a TryRun ... file in the native system
    • This could be generated (as a skeleton) with the following commands

Building the ToolChain for ARM

Gathering Configuration settings in the target system

Following the advice of the CMake Wiki [3]

Put the following in a file called ToolChain.cmake

 # this one is important
 SET(CMAKE_SYSTEM_NAME Linux)
 #this one not so much
 SET(CMAKE_SYSTEM_VERSION 1)
 # specify the cross compiler
 SET(CMAKE_C_COMPILER
 /home/ibanez/local/x-tools/arm-unknown-linux-gnueabi/bin/arm-unknown-linux-gnueabi-gcc)
 SET(CMAKE_CXX_COMPILER
 /home/ibanez/local/x-tools/arm-unknown-linux-gnueabi/bin/arm-unknown-linux-gnueabi-g++)
 # where is the target environment
 SET(CMAKE_FIND_ROOT_PATH
 /home/ibanez/local/x-tools/arm-unknown-linux-gnueabi)
 # search for programs in the build host directories
 SET(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER)
 # for libraries and headers in the target directories
 SET(CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY)
 SET(CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY)


and run it with CMake using the command (in an empty directory)

 cmake -DCMAKE_TOOLCHAIN_FILE=./ToolChain.cmake   ~/src/ITK

This will generate (among many other things) a File called

              TryRunResults.cmake

Then, manually populate, the values of each one of the fields.

The values to be put in this file can be taken from the CMakeCache.txt file of a native build in the Raspberry Pi.

For reference,

Using the Configuration in the Host

Now that you have copied the TryRunResuls.cmake file to the host system, you can use it as an initial cache for configuring the build.

Do the command in the build system.

   cmake -C ~/TryRunResults.cmake -DCMAKE_TOOLCHAIN_FILE=./ToolChain.cmake  ~/src/ITK

once the configuration is completed you can proceed to build ITK by simply typing

   make

Dealing with TIFF bootstrapping

The build process of the TIFF library requires to first build an executable file called:

  • mkg3states (renamed as itkmkg3states in ITK)

in order to generate a file called:

  • tif_fax2sm.c

Since, during the cross-compilation process we generate executables that are for a different target architecture, the itkmkg3states file that we built, can't be run in the host to generate the tif_fax2sm.c file.

One way around this is to build the executable for the architecture of the host (e.g. taking it from any other local build of ITK in the host), and use it to replace the itkmkg3states file. Then using it to generate the .c file.

This can be done with the following commands:

  • cd ITK_CROSS_COMPILED_BINARY_DIR/Modules/ThirdParty/TIFF/src/itktiff
  • cp ITK_NATIVE_BINARY_DIR/Modules/ThirdParty/TIFF/src/itktiff/itkmkg3states .
  • ./itkmkg3states -c const ITK_CROSS_COMPILED_BINARY_DIR/Modules/ThirdParty/TIFF/src/itktiff/tif_fax3sm.c

Then it is possible to continue with the "make" process.

Packaging

Once the build finishes, we can package ITK with the command:

  • make package

this will produce three files (that are independent of each other)

  • ITK-4.4.0-Linux.sh
  • ITK-4.4.0-Linux.tar.gz
  • ITK-4.4.0-Linux.tar.Z