ITK/How to make a Release: Difference between revisions

From KitwarePublic
< ITK
Jump to navigationJump to search
(→‎InsightApplications tarball: ITKApps zip instructions)
Line 115: Line 115:


   CableSwig-ITK-2.2.0.tar.gz
   CableSwig-ITK-2.2.0.tar.gz
=== Creating Zip files on Windows ===
Follow the above instructions for exporting the source files in a Windows machine. This can be done with a Cygwin that has been configured at installation-time for using a DOS file system, not a UNIX filesystem.
Once you have both directories: Insight and InsightApplications, right click on each of them and select the option "send to compressed file".


=== Generating Doxygen Documentation ===
=== Generating Doxygen Documentation ===

Revision as of 14:14, 5 March 2012

How To Make an ITK Release

This page describes the sequence of steps required for making an ITK release

Update CMake version required in CMakeList.txt

edit CMakeLists.txt and find the variables

   CMAKE_MINIMUM_REQUIRED

and set it to the latest stable release of CMake.

Update Version number in CMakeList.txt

Edit CMakeLists.txt and find the variables

  • SET(ITK_VERSION_MAJOR "2")
  • SET(ITK_VERSION_MINOR "2")
  • SET(ITK_VERSION_PATCH "0")

and update them according to the current release number.

Commit this change to the Git repository.

Tag the Insight repository

Tagging the repository should only be done with the agreement of the developers after a tcon.

Update your repository with

use the commmand

  git checkout master
  git pull

to make sure that your source tree is updated. This must correspond to a source tree that has been fully tested in the Dashboard.

Tag with a branch point reference

Note: At this time, Brad King and Luis Ibanez are the person to do this because of their trusted GPG key.

In the source tree that you just updated, use the command

  git tag v4.0.0

where, of course you change v4.0.0 for the correct release number.

Push it to the repository

 git push --tags origin master

Before tagging the ITKApps repository, make a commit that bumps the superbuild ITK version.

Update the release branch

Make note of the commit hash with the bump in CMakeList.txt version number. Then

 git checkout release
 git reset --hard origin/release
 git merge <version bump hash>
 git push origin release
 git checkout master

Tag the InsightApplications repository

The same sequence of steps used for Insight must be used for tagging and branching the module of InsightApplications

Tag CableSwig

  • CableSwig must be tagged with the same tag used for the ITK release.
  • This is currently done by Gaetan Lehmann.

Prepare tarballs

InsightToolkit tarball

Once the repository has been tagged, we use the following script in the repository to create the tarballs:

   Utilities/Maintenance/SourceTarball.bash

InsightApplications tarball

Set the prefix

  prefix=InsightApplications-4.1.1/

create the tar file with the command

  git archive --format=tar --prefix=${prefix}/ --output=${prefix}.tar v4.1.1-apps

use the maximum compression with gzip

  gzip -9  ${prefix}.tar

That should produce a file named

  ${prefix}.tar.gz

Create a zip file with

 git archive --format=zip -9 --prefix=${prefix}/ --output=${prefix}.zip v4.1.1-apps

CableSwig tarball

create the tar file with the command

  tar -c -f CableSwig-ITK-2.2.0.tar   CableSwig-ITK-2.2.0

use the maximum compression with gzip

  gzip -9  CableSwig-ITK-2.2.0.tar

That should produce a file named

  CableSwig-ITK-2.2.0.tar.gz

Generating Doxygen Documentation

  • Run CMake in the binary build and enable BUILD_DOXYGEN
  • Do Configure and Generate in CMake
  • Go to the binary directory
  • Type "make Documentation"
  • Move into the directory Utilities/ ( cd Utilities/ )
  • Rename the Doxygen directory as DoxygenInsightToolkit-3.4.0 (of course with the appropriate release number)
  • Tar it with the command: tar -cf DoxygenInsightToolkit-3.4.0.tar DoxygenInsightToolkit-3.4.0
  • Compress it with the command: gzip -9 DoxygenInsightToolkit-3.4.0.tar

Historical note: Before ITK 3.8, The documentation used to be generated in a directory called Documentation/Doxygen.

  • In Public do:
    • Copy documentation to: /projects/Insight/Doxygen
      • Create a subdirectory Insight34-doxygen/Documentation/Doxygen
      • The final directory will look like: /projects/Insight/Doxygen/Insight34-doxygen/Documentation/Doxygen
      • and at that level copy the "html" directory and the InsightToolkit.tag file.
    • Create symbolic link at: /projects/Insight/WWW/InsightWeb
    • Create symbolic link at: /projects/Insight/WWW/InsightDocuments/Web

Copy the files to the FTP directory in public.kitware.com

 scp   InsightToolkit-2.4.0.tar.gz         kitware@public:/projects/Insight/WWW/InsightDocuments/Web/files/v2.4
 scp   InsightApplications-2.4.0.tar.gz    kitware@public:/projects/Insight/WWW/InsightDocuments/Web/files/v2.4
 scp   InsightToolkit-2.4.0.zip            kitware@public:/projects/Insight/WWW/InsightDocuments/Web/files/v2.4
 scp   InsightApplications-2.4.0.zip       kitware@public:/projects/Insight/WWW/InsightDocuments/Web/files/v2.4
 scp   DoxygenInsightToolkit-2.4.0.tar.gz  kitware@public:/projects/Insight/WWW/InsightDocuments/Web/files/v2.4
 scp   DoxygenInsightToolkit-2.4.0.zip     kitware@public:/projects/Insight/WWW/InsightDocuments/Web/files/v2.4
 scp   CableSwig-2.4.0.tar.gz              kitware@public:/projects/Insight/WWW/InsightDocuments/Web/files/v2.4
 scp   CableSwig-2.4.0.zip                 kitware@public:/projects/Insight/WWW/InsightDocuments/Web/files/v2.4

Copy the files to SourceForge

This is to be done only by

  • Ken Martin at Kitware
  • Luis Ibanez at Kitware

Using The New (2010) Interface

Go to this page

  https://sourceforge.net/downloads/itk/itk/

and provide user name and password

Then

  • Use the "Add Folder" button to create a folder for the release.
  • Click on the folder to open it
  • Use the "Add File" button to upload files. The interface allows you to select multiple files for simultaneous upload.

Update the HTML Download page

Contact Niki Russell at Kitware in order to

Update the HTML Documentation page

Documentation.htm

Contact Niki Russell at Kitware in order to update the page:

  http://www.itk.org/ITK/help/documentation.html

The content should be updated to point to the Doxygen documentation of the current release

Installing Doxygen documentation in public.kitware.com

The DoxygenInsightToolkit-X.X.X.tar.zip should be expanded in public.kitware.com in such a way that the Doxygen documentation becomes available at

 http://www.itk.org/Doxygen34/html/index.html

see directory: /projects/Insight/Doxygen

Once installed the documentation should be in

 /projects/Insight/Doxygen/Insight32-doxygen/Documentation/Doxygen

(with the appropriate release number...)

Create symbolic link in the directory:

 /projects/Insight/WWW/InsightDocuments/Web

The link will look like:

 Doxygen34 -> ../../../Doxygen/Insight34-doxygen/Documentation/Doxygen//

Update the Release Notes in the Wiki

Update "What's New in Release x.x" Wiki Page

From a Linux system, cd into an Insight binary directory and run

./NewSince.csh StartDateOfRelease EndDateofRelease
For example, Release 2.0
./NewSince.csh "August 10, 2004" "February 4, 2005"

This will produce a file in @ITK_BIN_DIR@/Testing/Temporary/NewSince.txt that can be pasted into the Wiki page ITK_RELEASE_X_X. Update the main ITK Wiki page to include a link to this new page.


Update "What has Changed since previous release"

From a Linux system, cd into an Insight binary directory and run

./ChangedSince.csh StartDateOfRelease EndDateofRelease
For example, Release 2.0
./ChangedSince.csh "August 10, 2004" "February 4, 2005"

This will produce a file in @ITK_BIN_DIR@/Testing/Temporary/ChangedSince.txt that can be pasted into the Wiki page ITK_RELEASE_X_X. Update the main ITK Wiki page to include a link to this new page.

Update Insight Journal

Contact Zack and request to do the following:

  • Install new ITK version in the Insight Journal testing environment
  • Update IJMacros.txt: Add the just released version of ITK


Update MANTIS bug tracker

  • Create a new version to make possible for users to report bug pertaining to that specific ITK release
    • This is particularly important for being able to commit changes to the branch, since all change must have a bug number associated with it.


Further Testing

The purpose of this testing is to replicate the experience that a user may have when trying the new release.

This means that a number of ITK developers should download the tarballs or do CVS checkouts with the release tag, and build the toolki t in as many configuration as possible.



ITK: [Welcome | Site Map]