KWWidgets/GUI Testing/Squish/SquishForSlicer3

From KitwarePublic
< KWWidgets/GUI Testing/Squish
Revision as of 16:39, 29 December 2008 by Yumin (talk | contribs) (New page: =Goals= == VERY IMPORTANT: Squish must be built with the same tcl/tk libraries that Slicer3 is using, otherwise, Squish won't launch Slicer3. Also, if you have not read [[KWWidgets/GUI_Te...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Goals

VERY IMPORTANT: Squish must be built with the same tcl/tk libraries that Slicer3 is using, otherwise, Squish won't launch Slicer3. Also, if you have not read Squish with CMake and KWWidgets, please do so before you try Slicer3 with Squish

  • Invoke the Squish module when configuring/building Slicer3.
 NOTE: This is not commited to Slicer3 yet, but can be used as a starting point if you want to experiment Squish with Slicer3.

Files

Modify this file under Slicer3/CMake directory:

  • SlicerMacros.cmake: define Slicer3_ADD_Squish_TEST macro
# Slicer3_ADD_Squish_TEST

macro(slicer3_add_squish_test
    test_name
    squish_AUT_name
    squish_test_case_path
    slicerScriptFile
    )

  # Try to find the full path to the test executable

  include("${KWWidgets_CMAKE_DIR}/KWWidgetsTestingMacros.cmake")
  kwwidgets_get_full_path_to_executable(${squish_AUT_name} exe_path)
 
  KWWidgets_ADD_Squish_TEST(
    "${test_name}"
    "${exe_path}"
    "${squish_test_case_path}"
    "${slicerENV}"
    "${slicerPathsScript}"
    "--test-mode --script ${slicerScriptFile}"
    )

  SET_TESTS_PROPERTIES(${test_name}
    PROPERTIES FAIL_REGULAR_EXPRESSION "FAILED;ERROR;FATAL")

endmacro(slicer3_add_squish_test)

Use

Create Squish test suites

Create a new Squish test suite under Slicer3/Applications/GUI/Testing/Squish with the Squish IDE. Because Squish is currently not recording the file name of an open file dialog, so it normally can not play back the "open-file" properly (We are currently discussing with Squish support on how to address this issue), but as a workaround, we can write a tcl script to load a scene with volume(s) when invoking Slicer3 from Squish. Here is a simple example of the tcl script, LoadSimpleScene.tcl:


update
$::slicer3::MRMLScene SetURL $::Slicer3_HOME/share/MRML/Testing/volScene.mrml
$::slicer3::MRMLScene Connect
update

Now add this LoadSimpleScene.tcl file to Slicer3/Applications/GUI/Testing, and change the Setting of the test suite to use this script (--test-mode --script ../../Slicer3/Applications/GUI/Testing/LoadSimpleScene.tcl), so that Slicer3 will automatically run the script and open the scene when launched from Squish. The "--test-mode" is to set "NoSplash=true" and "RegistryLevel=0".

Squish settings for launch Slicer3

==Add Squish tests to CTest lists==

Add the following to the CMakeLists.txt file under Slicer3/Applications/GUI/Testing, and here the LoadSimpleScene.tcl will then be passed to Squish tests as a AUT-start-script,

if(SQUISH_FOUND)

  include("${Slicer3_CMAKE_DIR}/Slicer3Macros.cmake")

  file(GLOB SquishTestSuites ${Slicer3_SOURCE_DIR}/Applications/GUI/Testing/Squish/* suite_*)

  foreach(SquishTestSuite ${SquishTestSuites})
    if(IS_DIRECTORY ${SquishTestSuite})

      string(REGEX MATCH ".+suite_(.*)" tmp_suite_name ${SquishTestSuite})
      set(squish_suite_name ${CMAKE_MATCH_1})  

      file(GLOB SquishTests ${SquishTestSuite}/* tst_*)
      foreach(SquishTest ${SquishTests})
        if(IS_DIRECTORY ${SquishTest})
        
          string(REGEX MATCH ".+(tst_(.*))" tmp_test_name ${SquishTest})
          set(squish_test_name "${CMAKE_MATCH_1}")  
          set(slicer_squish_test_name "Squish_${squish_suite_name}_${CMAKE_MATCH_2}")   

message(STATUS "squish_test_name='${squish_test_name}'")
message(STATUS "slicer_squish_test_name='${slicer_squish_test_name}'")
          
          slicer3_add_squish_test(
           ${slicer_squish_test_name} "${EXECUTABLE_OUTPUT_PATH}/Slicer3-real" 
           "${SquishTestSuite}/${squish_test_name}"
           "${Slicer3_SOURCE_DIR}/Applications/GUI/Testing/LoadSimpleScene.tcl")    

        endif(IS_DIRECTORY ${SquishTest})
      endforeach(SquishTest)
    endif(IS_DIRECTORY ${SquishTestSuite})
  endforeach(SquishTestSuite)

endif(SQUISH_FOUND)

Known Issues

Squish

Slicer3

  • Screenshot to validate the image-processing tests.