[ITK] [ITK-users] Install problem on Windows 7

Jon Haitz Legarreta jhlegarreta at vicomtech.org
Mon Dec 18 04:30:29 EST 2017


Hi Gib,
as it's been suggested, this is a known issue with Win 7's "C:\Program
Files" directory; the OS will not allow you to install anything there
without admin privileges. So not an ITK issue. May be the issue is
present in newer Microsoft OS's as well (have not checked).

Also, did you try to first post the question on
https://discourse.itk.org/? It's weird that "it gets marked as spam"
for a question like yours (talking about the installation question),
if that mechanism of marking inappropriate/spam messages exists at all
in the platform itself (have not seen a message with that "label"
yet), instead of being your mail server the one doing "that job" [1]
and you be missing the answers.

Anyway, try again posting your next question on
dhttps://discourse.itk.org/ directly ;-)


[1] https://meta.discourse.org/t/discourse-emails-are-marked-as-spam-on-gmail/6685/12


--



On 16 December 2017 at 05:50, Andras Lasso <lasso at queensu.ca> wrote:
> Normally on Windows you don’t install into your Program Files folder using
> Visual Studio. Instead, you create an NSIS installation package, which you
> can install/uninstall as usual.
>
>
>
> CMake’s default C:\Program Files\ folder for install prefix is probably just
> blind copying from unix-type operating system. It is not necessary (and not
> a good idea in general) to run Visual Studio as administrator, just set
> CMAKE_INSTALL_PREFIX to a folder where your user has write access without
> elevation.
>
>
>
> Andras
>
>
>
> From: Community [mailto:community-bounces at itk.org] On Behalf Of Gib Bogle
> Sent: Friday, December 15, 2017 9:39 PM
> To: Dženan Zukić <dzenanz at gmail.com>; Insight-users <insight-users at itk.org>
> Subject: Re: [ITK] [ITK-users] Install problem on Windows 7
>
>
>
> I agree, good to put this on the mailing list.
>
>
>
> I don't know how to stop Win7 from asking me to confirm that I want to use
> my administrator access rights.  Normally it's just mildly irritating, but
> in this case it created a more serious problem.
>
> ________________________________
>
> From: Dženan Zukić <dzenanz at gmail.com>
> Sent: Saturday, 16 December 2017 3:33 p.m.
> To: Gib Bogle; Insight-users
> Subject: Re: [ITK-users] Install problem on Windows 7
>
>
>
> I usually disable the security prompts, they are too annoying. That might
> not matter on Win10 (I am running Win7).
>
>
>
> I am CC'ing the mailing list, so if someone comes across this again they can
> see what the solutions was.
>
>
>
> I have seen you shared xaas.tif. I will look into that next time I go to the
> office.
>
>
>
> Regards,
>
> Dženan
>
>
>
> On Fri, Dec 15, 2017 at 9:25 PM, Gib Bogle <g.bogle at auckland.ac.nz> wrote:
>
> I just realised that I was mistaken in thinking that VS was truncating the
> install directory name.  It's just that the long filename was split over two
> lines.  Duh! Now it seems that in fact it is a permissions issue, as you
> suggested.  Although I have administrator rights, when I do things in some
> C: directories I am asked if I want to continue - to verify that I am using
> my administrator permission.  It seems that at some stage the VS install
> wants to set permissions on
>
> ITKConfig.cmake, for some reason.
>
>
>
> I have now opened VS2010 by "Run as administrator", and successfully
> completed the install.
>
>
>
> Thanks for your help.  By the way, did you see that I've put xaas.rar
> (compressed form of xaas.tif) on the Kitware data site?  For some peculiar
> reason some of my posts on the Discourse site are being hidden, apparently
> being flagged by several members as spam.  I have no idea what is causiing
> that.
>
>
>
> Cheers
>
> Gib
>
> ________________________________
>
> From: Dženan Zukić <dzenanz at gmail.com>
> Sent: Saturday, 16 December 2017 2:18 p.m.
> To: Gib Bogle; Insight-users
>
> Subject: Re: [ITK-users] Install problem on Windows 7
>
>
>
> Hi Gib,
>
>
>
> are you running Visual Studio (or whatever is your make tool, e.g. ninja) as
> administrator? I suppose writing in Program Files requires administrative
> privileges. The Linux equivalent is make install does not work, so you need
> to do sudo make install.
>
>
>
> Regards,
>
> Dženan
>
>
>
> On Fri, Dec 15, 2017 at 8:08 PM, Gib Bogle <g.bogle at auckland.ac.nz> wrote:
>
> Hi Dzenan,
>
>
>
> I just updated cmake to 3.10, and went though the build procedure again.
> This is CMAKE_INSTALL_PREFIX:
>
> C:/Program Files/ITK4.12.2
>
> and this is the install error message:
>
> 143>  -- Install configuration: "Release"
> 143>  -- Up-to-date: C:/Program
> Files/ITK4.12.2/lib/cmake/ITK-4.12/ITKConfig.cmake
> 143>  CMake Error at cmake_install.cmake:36 (file):
> 143>    file INSTALL cannot set permissions on "C:/Program
> 143>    Files/ITK4.12.2/lib/cmake/ITK-4.12/ITKConfig.cmake"
>
>
>
> (C:/Program Files/itk4.12.2 already exists)  I've never had problems with
> cmake before.  This is bizarre.
>
>
>
> What version of VS are you using?
>
>
>
> Cheers
>
> Gib
>
> ________________________________
>
> From: Dženan Zukić <dzenanz at gmail.com>
> Sent: Saturday, 16 December 2017 12:52 p.m.
> To: Gib Bogle
> Cc: insight-users
> Subject: Re: [ITK-users] Install problem on Windows 7
>
>
>
> Hi Gib,
>
>
>
> as installing into C:/Program Files/ITK prefix works for me, it must be the
> CMake version. Fortunately, updating CMake is easy.
>
>
>
> Regards,
>
> Dženan
>
>
>
> On Fri, Dec 15, 2017 at 5:15 PM, Gib Bogle <g.bogle at auckland.ac.nz> wrote:
>
> I spoke too soon.  I saw the install proceeding successfully, and leapt to
> the conclusion that it was putting the files in the right place (I'd got the
> mistaken idea that C:/Program Files/ITK4.12.2 was the default install
> directory, by misinterpreting cmake_install.cmake).  So the directories -
> bin, include, lib, share - were all created under D:/.  No big deal to copy
> them to C:/Program Files/ITK4.12.2, but this is clearly an issue.  Has
> anybody else encountered this?
>
> ________________________________
>
> From: Insight-users <insight-users-bounces at itk.org> on behalf of Gib Bogle
> <g.bogle at auckland.ac.nz>
> Sent: Saturday, 16 December 2017 10:49 a.m.
> To: insight-users
> Subject: [FORGED] Re: [ITK-users] Install problem on Windows 7
>
>
>
> If I leave the CMAKE_INSTALL_PREFIX blank, it installs correctly (in the
> same place I specified).  It must be a cmake bug - no problem once you know
> how to avoid it.
>
> ________________________________
>
> From: Insight-users <insight-users-bounces at itk.org> on behalf of Gib Bogle
> <g.bogle at auckland.ac.nz>
> Sent: Saturday, 16 December 2017 10:14 a.m.
> To: insight-users
> Subject: [FORGED] [ITK-users] Install problem on Windows 7
>
>
>
> I've been using ITK4.8.0, which I built two years ago, so I decided to build
> 4.12.2, in case something has been fixed since then.
>
>
>
> Following exactly the same procedure with cmake-gui as before, and setting
> CMAKE_INSTALL_PREFIX as
>
> C:/Program Files/ITK4.12.2
>
> everything goes fine (building with VS2010 Win64) until the actual install
> step of copying the files to the install directory.  The error message is:
>
>
>
> 135>  -- Install configuration: "Release"
> 135>  CMake Error at cmake_install.cmake:31 (file):
> 135>    file cannot create directory: C:/Program
> 135>    Files/ITK4.12.2/lib/cmake/ITK-4.12.  Maybe need administrative
> privileges.
>
>
>
> Clearly the CMAKE_INSTALL_PREFIX is not being treated correctly, and the
> space is terminating the directory name.  I tried putting quotes around it,
> but that produced a similar but even more strange result - cmake had
> inserted a ';', making the directory C:/Program;Files/ITK4.12.2
>
> Is this an issue with the cmake version?  I am using cmake 3.0.2.
>
>
>
> I considered copying all the files by hand, but I'm not sure if that's
> really feasible.
>
>
> The ITK community is transitioning from this mailing list to
> discourse.itk.org. Please join us there!
> ________________________________
> Powered by www.kitware.com
>
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
>
> Kitware offers ITK Training Courses, for more information visit:
> http://www.kitware.com/products/protraining.php
>
> Please keep messages on-topic and check the ITK FAQ at:
> http://www.itk.org/Wiki/ITK_FAQ
>
> Follow this link to subscribe/unsubscribe:
> https://itk.org/mailman/listinfo/insight-users
>
>
>
>
>
>
>
>
> The ITK community is transitioning from this mailing list to
> discourse.itk.org. Please join us there!
> ________________________________
> Powered by www.kitware.com
>
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
>
> Kitware offers ITK Training Courses, for more information visit:
> http://www.kitware.com/products/protraining.php
>
> Please keep messages on-topic and check the ITK FAQ at:
> http://www.itk.org/Wiki/ITK_FAQ
>
> Follow this link to subscribe/unsubscribe:
> https://itk.org/mailman/listinfo/insight-users
>
The ITK community is transitioning from this mailing list to discourse.itk.org. Please join us there!
________________________________
Powered by www.kitware.com

Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html

Kitware offers ITK Training Courses, for more information visit:
http://www.kitware.com/products/protraining.php

Please keep messages on-topic and check the ITK FAQ at:
http://www.itk.org/Wiki/ITK_FAQ

Follow this link to subscribe/unsubscribe:
https://itk.org/mailman/listinfo/insight-users


More information about the Community mailing list