AW: AW: AW: [Insight-users] Compiling ITK with MIPSPro (CC) compiler under IRIX 6.5
Nils Hanßen
hanssen at caesar.de
Tue Nov 6 10:13:15 EST 2001
Hello Bill,
unfortunately, it doesn't work either !
I just tried it and i get the same error as before:
---
/home/hanssen/InsightCC/Code/Numerics/vxl/vnl/vnl_numeric_trai
ts.h, Line = 30
The expression must have integral or enum type.
static const T zero VCL_STATIC_CONST_INIT_FLOAT(0.0);
---
Any more ideas ?
Thanks very much !
Nils
> OK, I know what is wrong.
>
> You need to do this :
>
> (export CXXFLAGS=-LANG:std; cmake ../Insight)
>
> You have to set CXXFLAGS before you run cmake. The numerics
> code configures itself
> based on the capabilities of the compiler, so you have to
> specify the -LANG:std
> before configure is run.
>
> You should not edit the Makefiles directly.
>
> -Bill
>
>
> At 03:18 PM 11/6/2001 +0100, Nils Hanßen wrote:
> >Yes, i use CMake right from the beginning and it works fine
> (after some
> >problems with the environment variables $CC, $CXX and so on...).
> >Actually, i added "-LANG:std" to the command line, but
> another error occured
> >(i wrote this in the previos mail). There was an error in
> >/home/hanssen/InsightCC/Code/Numerics/vxl/vnl/vnl_numeric_tra
> its.h, Line =
> >30
> >
> >-snippet(begin)-----------------
> >
> > The expression must have integral or enum type.
> >
> > static const T zero VCL_STATIC_CONST_INIT_FLOAT(0.0);
> >-snippet(end)-------------------
> >
> >First, i used the version from the tarballs. Now i am using
> the 2001-10-18
> >version, because i checked the dashboard and this version
> reported no errors
> >for CC. Should i switch to a newer version ? Which one is
> supposed to be the
> >best for CC right now ?
> >
> >Thanks
> >Nils
> >
> >
> >
> >> Nils,
> >>
> >> You may need to add the "-LANG:std" option
> >> to your compiler's command line.
> >>
> >> However you shouldn't have to do this by
> >> hand...
> >>
> >> Are you using CMake to configure and
> >> build ITK ?
> >>
> >> That's the easiest way to get things in order.
> >> Buiding CMake itself takes an additional step
> >> but that will save you a lot of time of struggling
> >> with makefiles.
> >>
> >> If you are already using CMake, you may want
> >> to verify that "-LANG:std" is among the options
> >> in CXX_FLAGS on the main CMakeList.txt
> >> file located in the "Insight" root directory.
> >>
> >> Please let us know if that helps.
> >>
> >>
> >> BTW: What version of ITK are you using ?
> >> is that one of the tarballs or are you
> >> downloading it from the CVS repository ?
> >>
> >>
> >>
> >> Thanks
> >>
> >>
> >>
> >> Luis
> >>
> >>
> >>
> >>
> >> ------------
> >>
> >> On Tue, 6 Nov 2001, Nils Hanßen wrote:
> >>
> >> > Hi Luis,
> >> >
> >> > thank you very much for your help !
> >> >
> >> > The problematic file (where <cstring> is included) is
> >> > ./Code/Numerics/vxl/vcl/iso/vcl_cstring.h.
> >> > When i replace <cstring> with <string.h>, i get the
> >> following error message:
> >> >
> >> >
> >> --------------------------------------------------------------
> >> --------------
> >> > ------
> >> > [...]
> >> > CC -g -O2 -I/home/hanssen/InsightCC/Code/Numerics/vxl
> >> -I/home/hanssen/Insig
> >> > htCC -I/home/hanssen/InsightCC/Code/Numerics
> >> -I/home/hanssen/InsightCC/Code/
> >> > Common -I/home/hanssen/InsightCC/Code/Numerics/vxl
> >> -I/home/hanssen/InsightCC
> >> > /Code/Numerics/vxl
> >> -I/home/hanssen/InsightCC/Code/Numerics/vxl/vcl -I/home/h
> >> > anssen/InsightCC/Code/Numerics/vxl/vcl
> >> -I/home/hanssen/InsightCC/Utilities/p
> >> > ng -I/home/hanssen/InsightCC/Utilities/zlib -c
> >> > vnl/Templates/vcl_vector+vnl_double_2-.cxx -o
> >> > vnl/Templates/vcl_vector+vnl_double_2-.o
> >> > cc-1035 CC: WARNING File = /usr/include/CC/iosfwd, Line = 18
> >> > #error directive: This header file requires the
> -LANG:std option
> >> >
> >> > #error This header file requires the -LANG:std option
> >> > ^
> >> >
> >> > cc-1070 CC: ERROR File = /usr/include/CC/string, Line = 2172
> >> > The indicated type is incomplete.
> >> >
> >> > char __f = __os.fill();
> >> > ^
> >> >
> >> > cc-1367 CC: ERROR File = /usr/include/CC/string, Line = 2175
> >> > A pointer to an incomplete class type is not allowed.
> >> >
> >> > for (__i = 0; __i < __n; __i++) __buf->sputc(__f);
> >> > [...] ^
> >> >
> >> --------------------------------------------------------------
> >> --------------
> >> > ------
> >> >
> >> >
> >> > If i add "-LANG:std" to the command line of CC, i get this
> >> error message:
> >> >
> >> >
> >> --------------------------------------------------------------
> >> --------------
> >> > ------
> >> > [...]
> >> > CC -g -O2 -LANG:std
> >> -I/home/hanssen/InsightCC/Code/Numerics/vxl -I/home/han
> >> > ssen/InsightCC -I/home/hanssen/InsightCC/Code/Numerics
> >> -I/home/hanssen/Insig
> >> > htCC/Code/Common
> >> -I/home/hanssen/InsightCC/Code/Numerics/vxl -I/home/hanssen
> >> > /InsightCC/Code/Numerics/vxl
> >> -I/home/hanssen/InsightCC/Code/Numerics/vxl/vcl
> >> > -I/home/hanssen/InsightCC/Code/Numerics/vxl/vcl
> >> -I/home/hanssen/InsightCC/U
> >> > tilities/png -I/home/hanssen/InsightCC/Utilities/zlib -c
> >> > vnl/Templates/vcl_vector+vnl_double_2-.cxx -o
> >> > vnl/Templates/vcl_vector+vnl_double_2-.o
> >> > cc-3315 CC: ERROR File =
> >> >
> >> /home/hanssen/InsightCC/Code/Numerics/vxl/vnl/vnl_numeric_trai
> >> ts.h, Line =
> >> > 30
> >> > The expression must have integral or enum type.
> >> >
> >> > static const T zero VCL_STATIC_CONST_INIT_FLOAT(0.0);
> >> > ^
> >> >
> >> > cc-3315 CC: ERROR File =
> >> >
> >> /home/hanssen/InsightCC/Code/Numerics/vxl/vnl/vnl_numeric_trai
> >> ts.h, Line =
> >> > 31
> >> > The expression must have integral or enum type.
> >> >
> >> > static const T one VCL_STATIC_CONST_INIT_FLOAT(1.0);
> >> > ^
> >> >
> >> > cc-1295 CC: ERROR File =
> >> >
> >> /home/hanssen/InsightCC/Code/Numerics/vxl/vnl/vnl_numeric_trai
> >> ts.h, Line =
> >> > 167
> >> > The indicated data member initializer is not allowed.
> >> >
> >> > static const float zero VCL_STATIC_CONST_INIT_FLOAT(0.0F);
> >> > ^
> >> >
> >> > cc-1295 CC: ERROR File =
> >> >
> >> /home/hanssen/InsightCC/Code/Numerics/vxl/vnl/vnl_numeric_trai
> >> ts.h, Line =
> >> > 168
> >> > The indicated data member initializer is not allowed.
> >> >
> >> > static const float one VCL_STATIC_CONST_INIT_FLOAT(1.0F);
> >> > ^
> >> >
> >> > cc-1295 CC: ERROR File =
> >> >
> >> /home/hanssen/InsightCC/Code/Numerics/vxl/vnl/vnl_numeric_trai
> >> ts.h, Line =
> >> > 177
> >> > The indicated data member initializer is not allowed.
> >> >
> >> > static const double zero VCL_STATIC_CONST_INIT_FLOAT(0.0);
> >> > ^
> >> >
> >> > cc-1295 CC: ERROR File =
> >> >
> >> /home/hanssen/InsightCC/Code/Numerics/vxl/vnl/vnl_numeric_trai
> >> ts.h, Line =
> >> > 178
> >> > The indicated data member initializer is not allowed.
> >> >
> >> > static const double one VCL_STATIC_CONST_INIT_FLOAT(1.0);
> >> > ^
> >> >
> >> > cc-1295 CC: ERROR File =
> >> >
> >> /home/hanssen/InsightCC/Code/Numerics/vxl/vnl/vnl_numeric_trai
> >> ts.h, Line =
> >> > 187
> >> > The indicated data member initializer is not allowed.
> >> >
> >> > static const long double zero
> VCL_STATIC_CONST_INIT_FLOAT(0.0);
> >> > ^
> >> >
> >> > cc-1295 CC: ERROR File =
> >> >
> >> /home/hanssen/InsightCC/Code/Numerics/vxl/vnl/vnl_numeric_trai
> >> ts.h, Line =
> >> > 188
> >> > The indicated data member initializer is not allowed.
> >> >
> >> > static const long double one
> VCL_STATIC_CONST_INIT_FLOAT(1.0);
> >> > ^
> >> >
> >> > 8 errors detected in the compilation of
> >> > "vnl/Templates/vcl_vector+vnl_double_2-.cxx".
> >> > *** Error code 2 (bu21)
> >> > *** Error code 1 (bu21)
> >> > *** Error code 1 (bu21)
> >> > *** Error code 1 (bu21)
> >> >
> >> > [...]
> >> >
> >> --------------------------------------------------------------
> >> --------------
> >> > ------
> >> >
> >> > Do you think there is a problem in my configuration ?
> >> >
> >> > Regards
> >> > Nils
> >> >
> >> > > -----Ursprüngliche Nachricht-----
> >> > > Von: insight-users-admin at public.kitware.com
> >> > > [mailto:insight-users-admin at public.kitware.com]Im
> Auftrag von Luis
> >> > > Ibanez
> >> > > Gesendet: Dienstag, 6. November 2001 00:49
> >> > > An: Nils Hanßen
> >> > > Cc: insight-users at public.kitware.com
> >> > > Betreff: Re: [Insight-users] Compiling ITK with MIPSPro
> >> (CC) compiler
> >> > > under IRIX 6.5
> >> > >
> >> > >
> >> > > Hi Nils,
> >> > >
> >> > > You can replace <cstring> by <string.h> which
> >> > > is the C-Like equivalent.
> >> > >
> >> > > Could you please signal which file was including
> >> > > <cstring> so we can fix that in the repository.
> >> > > We are building ITK on SGI's so that should work
> >> > > pretty well.
> >> > >
> >> > > Please let us know if this include change works
> >> > > for you or not.
> >> > >
> >> > >
> >> > > Thanks
> >> > >
> >> > >
> >> > >
> >> > > Luis
> >> > >
> >> > > ----------------------------------
> >> > >
> >> > >
> >> > > > Nils Hanßen wrote:
> >> > > >
> >> > > > Hi all,
> >> > > >
> >> > > > i want to compile ITK with the MIPSPro compiler (version
> >> > > 7.3.1.2m) but
> >> > > > have some problems with a missing include file (i dont
> >> know if there
> >> > > > will be more problems with other files...).
> >> > > >
> >> > > > However, CC tries to include the <cstring> header file
> >> > > which seems to
> >> > > > be gcc-specific, since it cannot be found in the
> >> include-directories
> >> > > > of CC.
> >> > > >
> >> > > > Does anyone has successfully compiled ITK with CC or
> >> has an idea how
> >> > > > in can get or create a working <cstring> file for CC ?
> >> > > >
> >> > > > Thank you very much in advance !
> >> > > >
> >> > > > Regards,
> >> > > > Nils
> >> > > >
> >> > > > ----------------------------------
> >> > > > Nils Hanßen
> >> > > > Surgical Simulation and Navigation
> >> > > > research center c a e s a r
> >> > > > Friedensplatz 16
> >> > > > 53111 Bonn
> >> > > > fon: +49-228-9656-247
> >> > > > fax: +49-228-9656-111
> >> > > > http://www.caesar.de/ssn
> >> > > >
> >> > > >
> >> > >
> >> > > --
> >> > > Luis Ibanez CB#: 7060
> >> > > Research Assistan Professor phone:
> >> (919) 843 5436
> >> > > Division of Neurosurgery fax:
> >> (919) 966 6627
> >> > > University of North Carolina at Chapel Hill email:
> >> > > ibanez at cs.unc.edu
> >> > > Chapel Hill, NC 27599-7060
> >> > > http://www.cs.unc.edu/~ibanez
> >> > > _______________________________________________
> >> > > Insight-users mailing list
> >> > > Insight-users at public.kitware.com
> >> > > http://public.kitware.com/mailman/listinfo/insight-users
> >> > >
> >> >
> >> > _______________________________________________
> >> > Insight-users mailing list
> >> > Insight-users at public.kitware.com
> >> > http://public.kitware.com/mailman/listinfo/insight-users
> >> >
> >>
> >> --
> >> Luis Ibanez CB#: 7060
> >> Research Assistan Professor phone:
> (919) 843 5436
> >> Division of Neurosurgery fax:
> (919) 966 6627
> >> University of North Carolina at Chapel Hill email:
> >> ibanez at cs.unc.edu
> >> Chapel Hill, NC 27599-7060
> >> http://www.cs.unc.edu/~ibanez
> >>
> >>
> >> _______________________________________________
> >> Insight-users mailing list
> >> Insight-users at public.kitware.com
> >> http://public.kitware.com/mailman/listinfo/insight-users
> >>
> >
> >_______________________________________________
> >Insight-users mailing list
> >Insight-users at public.kitware.com
> >http://public.kitware.com/mailman/listinfo/insight-users
>
> _______________________________________________
> Insight-users mailing list
> Insight-users at public.kitware.com
> http://public.kitware.com/mailman/listinfo/insight-users
>
More information about the Insight-users
mailing list