AW: AW: AW: [Insight-users] Compiling ITK with MIPSPro (CC) compiler under IRIX 6.5
Nils Hanßen
hanssen at caesar.de
Wed Nov 7 09:55:29 EST 2001
Success !
I started from a clean directory and used the version from the tarballs. I
got a lot of warnings, but who cares but it works.
There was no problem with <cstring>, too !
Thanks all for your help !
Regards,
Nils
> I am fairly certain that this will work. We build that each
> night with no problems.
> It must be that some file is not being re-built.
> Can you try from a clean directory?
>
>
> mkdir InsightBuild
> setenv CXXFLAGS -LANG:std
> cmake ../Insight
>
>
>
> At 04:13 PM 11/6/2001 +0100, Nils Hanßen wrote:
> >Hello Bill,
> >
> >unfortunately, it doesn't work either !
> >
> >I just tried it and i get the same error as before:
> >
> >---
> >/home/hanssen/InsightCC/Code/Numerics/vxl/vnl/vnl_numeric_trai
> >ts.h, Line = 30
> > The expression must have integral or enum type.
> >
> > static const T zero VCL_STATIC_CONST_INIT_FLOAT(0.0);
> >---
> >
> >Any more ideas ?
> >
> >Thanks very much !
> >
> >Nils
> >
> >
> >
> >> OK, I know what is wrong.
> >>
> >> You need to do this :
> >>
> >> (export CXXFLAGS=-LANG:std; cmake ../Insight)
> >>
> >> You have to set CXXFLAGS before you run cmake. The numerics
> >> code configures itself
> >> based on the capabilities of the compiler, so you have to
> >> specify the -LANG:std
> >> before configure is run.
> >>
> >> You should not edit the Makefiles directly.
> >>
> >> -Bill
> >>
> >>
> >> At 03:18 PM 11/6/2001 +0100, Nils Hanßen wrote:
> >> >Yes, i use CMake right from the beginning and it works fine
> >> (after some
> >> >problems with the environment variables $CC, $CXX and so on...).
> >> >Actually, i added "-LANG:std" to the command line, but
> >> another error occured
> >> >(i wrote this in the previos mail). There was an error in
> >> >/home/hanssen/InsightCC/Code/Numerics/vxl/vnl/vnl_numeric_tra
> >> its.h, Line =
> >> >30
> >> >
> >> >-snippet(begin)-----------------
> >> >
> >> > The expression must have integral or enum type.
> >> >
> >> > static const T zero VCL_STATIC_CONST_INIT_FLOAT(0.0);
> >> >-snippet(end)-------------------
> >> >
> >> >First, i used the version from the tarballs. Now i am using
> >> the 2001-10-18
> >> >version, because i checked the dashboard and this version
> >> reported no errors
> >> >for CC. Should i switch to a newer version ? Which one is
> >> supposed to be the
> >> >best for CC right now ?
> >> >
> >> >Thanks
> >> >Nils
> >> >
> >> >
> >> >
> >> >> Nils,
> >> >>
> >> >> You may need to add the "-LANG:std" option
> >> >> to your compiler's command line.
> >> >>
> >> >> However you shouldn't have to do this by
> >> >> hand...
> >> >>
> >> >> Are you using CMake to configure and
> >> >> build ITK ?
> >> >>
> >> >> That's the easiest way to get things in order.
> >> >> Buiding CMake itself takes an additional step
> >> >> but that will save you a lot of time of struggling
> >> >> with makefiles.
> >> >>
> >> >> If you are already using CMake, you may want
> >> >> to verify that "-LANG:std" is among the options
> >> >> in CXX_FLAGS on the main CMakeList.txt
> >> >> file located in the "Insight" root directory.
> >> >>
> >> >> Please let us know if that helps.
> >> >>
> >> >>
> >> >> BTW: What version of ITK are you using ?
> >> >> is that one of the tarballs or are you
> >> >> downloading it from the CVS repository ?
> >> >>
> >> >>
> >> >>
> >> >> Thanks
> >> >>
> >> >>
> >> >>
> >> >> Luis
> >> >>
> >> >>
> >> >>
> >> >>
> >> >> ------------
> >> >>
> >> >> On Tue, 6 Nov 2001, Nils Hanßen wrote:
> >> >>
> >> >> > Hi Luis,
> >> >> >
> >> >> > thank you very much for your help !
> >> >> >
> >> >> > The problematic file (where <cstring> is included) is
> >> >> > ./Code/Numerics/vxl/vcl/iso/vcl_cstring.h.
> >> >> > When i replace <cstring> with <string.h>, i get the
> >> >> following error message:
> >> >> >
> >> >> >
> >> >> --------------------------------------------------------------
> >> >> --------------
> >> >> > ------
> >> >> > [...]
> >> >> > CC -g -O2 -I/home/hanssen/InsightCC/Code/Numerics/vxl
> >> >> -I/home/hanssen/Insig
> >> >> > htCC -I/home/hanssen/InsightCC/Code/Numerics
> >> >> -I/home/hanssen/InsightCC/Code/
> >> >> > Common -I/home/hanssen/InsightCC/Code/Numerics/vxl
> >> >> -I/home/hanssen/InsightCC
> >> >> > /Code/Numerics/vxl
> >> >> -I/home/hanssen/InsightCC/Code/Numerics/vxl/vcl -I/home/h
> >> >> > anssen/InsightCC/Code/Numerics/vxl/vcl
> >> >> -I/home/hanssen/InsightCC/Utilities/p
> >> >> > ng -I/home/hanssen/InsightCC/Utilities/zlib -c
> >> >> > vnl/Templates/vcl_vector+vnl_double_2-.cxx -o
> >> >> > vnl/Templates/vcl_vector+vnl_double_2-.o
> >> >> > cc-1035 CC: WARNING File = /usr/include/CC/iosfwd, Line = 18
> >> >> > #error directive: This header file requires the
> >> -LANG:std option
> >> >> >
> >> >> > #error This header file requires the -LANG:std option
> >> >> > ^
> >> >> >
> >> >> > cc-1070 CC: ERROR File = /usr/include/CC/string, Line = 2172
> >> >> > The indicated type is incomplete.
> >> >> >
> >> >> > char __f = __os.fill();
> >> >> > ^
> >> >> >
> >> >> > cc-1367 CC: ERROR File = /usr/include/CC/string, Line = 2175
> >> >> > A pointer to an incomplete class type is not allowed.
> >> >> >
> >> >> > for (__i = 0; __i < __n; __i++) __buf->sputc(__f);
> >> >> > [...] ^
> >> >> >
> >> >> --------------------------------------------------------------
> >> >> --------------
> >> >> > ------
> >> >> >
> >> >> >
> >> >> > If i add "-LANG:std" to the command line of CC, i get this
> >> >> error message:
> >> >> >
> >> >> >
> >> >> --------------------------------------------------------------
> >> >> --------------
> >> >> > ------
> >> >> > [...]
> >> >> > CC -g -O2 -LANG:std
> >> >> -I/home/hanssen/InsightCC/Code/Numerics/vxl -I/home/han
> >> >> > ssen/InsightCC -I/home/hanssen/InsightCC/Code/Numerics
> >> >> -I/home/hanssen/Insig
> >> >> > htCC/Code/Common
> >> >> -I/home/hanssen/InsightCC/Code/Numerics/vxl -I/home/hanssen
> >> >> > /InsightCC/Code/Numerics/vxl
> >> >> -I/home/hanssen/InsightCC/Code/Numerics/vxl/vcl
> >> >> > -I/home/hanssen/InsightCC/Code/Numerics/vxl/vcl
> >> >> -I/home/hanssen/InsightCC/U
> >> >> > tilities/png -I/home/hanssen/InsightCC/Utilities/zlib -c
> >> >> > vnl/Templates/vcl_vector+vnl_double_2-.cxx -o
> >> >> > vnl/Templates/vcl_vector+vnl_double_2-.o
> >> >> > cc-3315 CC: ERROR File =
> >> >> >
> >> >> /home/hanssen/InsightCC/Code/Numerics/vxl/vnl/vnl_numeric_trai
> >> >> ts.h, Line =
> >> >> > 30
> >> >> > The expression must have integral or enum type.
> >> >> >
> >> >> > static const T zero VCL_STATIC_CONST_INIT_FLOAT(0.0);
> >> >> > ^
> >> >> >
> >> >> > cc-3315 CC: ERROR File =
> >> >> >
> >> >> /home/hanssen/InsightCC/Code/Numerics/vxl/vnl/vnl_numeric_trai
> >> >> ts.h, Line =
> >> >> > 31
> >> >> > The expression must have integral or enum type.
> >> >> >
> >> >> > static const T one VCL_STATIC_CONST_INIT_FLOAT(1.0);
> >> >> > ^
> >> >> >
> >> >> > cc-1295 CC: ERROR File =
> >> >> >
> >> >> /home/hanssen/InsightCC/Code/Numerics/vxl/vnl/vnl_numeric_trai
> >> >> ts.h, Line =
> >> >> > 167
> >> >> > The indicated data member initializer is not allowed.
> >> >> >
> >> >> > static const float zero VCL_STATIC_CONST_INIT_FLOAT(0.0F);
> >> >> > ^
> >> >> >
> >> >> > cc-1295 CC: ERROR File =
> >> >> >
> >> >> /home/hanssen/InsightCC/Code/Numerics/vxl/vnl/vnl_numeric_trai
> >> >> ts.h, Line =
> >> >> > 168
> >> >> > The indicated data member initializer is not allowed.
> >> >> >
> >> >> > static const float one VCL_STATIC_CONST_INIT_FLOAT(1.0F);
> >> >> > ^
> >> >> >
> >> >> > cc-1295 CC: ERROR File =
> >> >> >
> >> >> /home/hanssen/InsightCC/Code/Numerics/vxl/vnl/vnl_numeric_trai
> >> >> ts.h, Line =
> >> >> > 177
> >> >> > The indicated data member initializer is not allowed.
> >> >> >
> >> >> > static const double zero VCL_STATIC_CONST_INIT_FLOAT(0.0);
> >> >> > ^
> >> >> >
> >> >> > cc-1295 CC: ERROR File =
> >> >> >
> >> >> /home/hanssen/InsightCC/Code/Numerics/vxl/vnl/vnl_numeric_trai
> >> >> ts.h, Line =
> >> >> > 178
> >> >> > The indicated data member initializer is not allowed.
> >> >> >
> >> >> > static const double one VCL_STATIC_CONST_INIT_FLOAT(1.0);
> >> >> > ^
> >> >> >
> >> >> > cc-1295 CC: ERROR File =
> >> >> >
> >> >> /home/hanssen/InsightCC/Code/Numerics/vxl/vnl/vnl_numeric_trai
> >> >> ts.h, Line =
> >> >> > 187
> >> >> > The indicated data member initializer is not allowed.
> >> >> >
> >> >> > static const long double zero
> >> VCL_STATIC_CONST_INIT_FLOAT(0.0);
> >> >> > ^
> >> >> >
> >> >> > cc-1295 CC: ERROR File =
> >> >> >
> >> >> /home/hanssen/InsightCC/Code/Numerics/vxl/vnl/vnl_numeric_trai
> >> >> ts.h, Line =
> >> >> > 188
> >> >> > The indicated data member initializer is not allowed.
> >> >> >
> >> >> > static const long double one
> >> VCL_STATIC_CONST_INIT_FLOAT(1.0);
> >> >> > ^
> >> >> >
> >> >> > 8 errors detected in the compilation of
> >> >> > "vnl/Templates/vcl_vector+vnl_double_2-.cxx".
> >> >> > *** Error code 2 (bu21)
> >> >> > *** Error code 1 (bu21)
> >> >> > *** Error code 1 (bu21)
> >> >> > *** Error code 1 (bu21)
> >> >> >
> >> >> > [...]
> >> >> >
> >> >> --------------------------------------------------------------
> >> >> --------------
> >> >> > ------
> >> >> >
> >> >> > Do you think there is a problem in my configuration ?
> >> >> >
> >> >> > Regards
> >> >> > Nils
> >> >> >
> >> >> > > -----Ursprüngliche Nachricht-----
> >> >> > > Von: insight-users-admin at public.kitware.com
> >> >> > > [mailto:insight-users-admin at public.kitware.com]Im
> >> Auftrag von Luis
> >> >> > > Ibanez
> >> >> > > Gesendet: Dienstag, 6. November 2001 00:49
> >> >> > > An: Nils Hanßen
> >> >> > > Cc: insight-users at public.kitware.com
> >> >> > > Betreff: Re: [Insight-users] Compiling ITK with MIPSPro
> >> >> (CC) compiler
> >> >> > > under IRIX 6.5
> >> >> > >
> >> >> > >
> >> >> > > Hi Nils,
> >> >> > >
> >> >> > > You can replace <cstring> by <string.h> which
> >> >> > > is the C-Like equivalent.
> >> >> > >
> >> >> > > Could you please signal which file was including
> >> >> > > <cstring> so we can fix that in the repository.
> >> >> > > We are building ITK on SGI's so that should work
> >> >> > > pretty well.
> >> >> > >
> >> >> > > Please let us know if this include change works
> >> >> > > for you or not.
> >> >> > >
> >> >> > >
> >> >> > > Thanks
> >> >> > >
> >> >> > >
> >> >> > >
> >> >> > > Luis
> >> >> > >
> >> >> > > ----------------------------------
> >> >> > >
> >> >> > >
> >> >> > > > Nils Hanßen wrote:
> >> >> > > >
> >> >> > > > Hi all,
> >> >> > > >
> >> >> > > > i want to compile ITK with the MIPSPro compiler (version
> >> >> > > 7.3.1.2m) but
> >> >> > > > have some problems with a missing include file (i dont
> >> >> know if there
> >> >> > > > will be more problems with other files...).
> >> >> > > >
> >> >> > > > However, CC tries to include the <cstring> header file
> >> >> > > which seems to
> >> >> > > > be gcc-specific, since it cannot be found in the
> >> >> include-directories
> >> >> > > > of CC.
> >> >> > > >
> >> >> > > > Does anyone has successfully compiled ITK with CC or
> >> >> has an idea how
> >> >> > > > in can get or create a working <cstring> file for CC ?
> >> >> > > >
> >> >> > > > Thank you very much in advance !
> >> >> > > >
> >> >> > > > Regards,
> >> >> > > > Nils
> >> >> > > >
> >> >> > > > ----------------------------------
> >> >> > > > Nils Hanßen
> >> >> > > > Surgical Simulation and Navigation
> >> >> > > > research center c a e s a r
> >> >> > > > Friedensplatz 16
> >> >> > > > 53111 Bonn
> >> >> > > > fon: +49-228-9656-247
> >> >> > > > fax: +49-228-9656-111
> >> >> > > > http://www.caesar.de/ssn
> >> >> > > >
> >> >> > > >
> >> >> > >
> >> >> > > --
> >> >> > > Luis Ibanez CB#: 7060
> >> >> > > Research Assistan Professor phone:
> >> >> (919) 843 5436
> >> >> > > Division of Neurosurgery fax:
> >> >> (919) 966 6627
> >> >> > > University of North Carolina at Chapel Hill email:
> >> >> > > ibanez at cs.unc.edu
> >> >> > > Chapel Hill, NC 27599-7060
> >> >> > > http://www.cs.unc.edu/~ibanez
> >> >> > > _______________________________________________
> >> >> > > Insight-users mailing list
> >> >> > > Insight-users at public.kitware.com
> >> >> > > http://public.kitware.com/mailman/listinfo/insight-users
> >> >> > >
> >> >> >
> >> >> > _______________________________________________
> >> >> > Insight-users mailing list
> >> >> > Insight-users at public.kitware.com
> >> >> > http://public.kitware.com/mailman/listinfo/insight-users
> >> >> >
> >> >>
> >> >> --
> >> >> Luis Ibanez CB#: 7060
> >> >> Research Assistan Professor phone:
> >> (919) 843 5436
> >> >> Division of Neurosurgery fax:
> >> (919) 966 6627
> >> >> University of North Carolina at Chapel Hill email:
> >> >> ibanez at cs.unc.edu
> >> >> Chapel Hill, NC 27599-7060
> >> >> http://www.cs.unc.edu/~ibanez
> >> >>
> >> >>
> >> >> _______________________________________________
> >> >> Insight-users mailing list
> >> >> Insight-users at public.kitware.com
> >> >> http://public.kitware.com/mailman/listinfo/insight-users
> >> >>
> >> >
> >> >_______________________________________________
> >> >Insight-users mailing list
> >> >Insight-users at public.kitware.com
> >> >http://public.kitware.com/mailman/listinfo/insight-users
> >>
> >> _______________________________________________
> >> Insight-users mailing list
> >> Insight-users at public.kitware.com
> >> http://public.kitware.com/mailman/listinfo/insight-users
> >>
>
> _______________________________________________
> Insight-users mailing list
> Insight-users at public.kitware.com
> http://public.kitware.com/mailman/listinfo/insight-users
>
More information about the Insight-users
mailing list