[Insight-users] itkScalarChanAndVeseSparseLevelSetImageFilter
Sgouritsa, Eleni
esgourit at Central.UH.EDU
Sun Jun 7 23:28:02 EDT 2009
Thank you very much.
Yes, I think too that my problem was coming from the foreground term.
Is it possible to notify me when you finish with the other changes of the class so I can work directly with the corrected version?
Regards,
Eleni
-----Original Message-----
From: Arnaud Gelas [mailto:arnaud_gelas at hms.harvard.edu]
Sent: Sun 6/7/2009 6:48 PM
To: Sgouritsa, Eleni
Cc: Kishore Mosaliganti; insight-users at itk.org; Luis Ibanez
Subject: Re: [Insight-users] itkScalarChanAndVeseSparseLevelSetImageFilter
Dear Eleni,
I have corrected a bug in the formula of the foreground constant
calculation. This error could really affect the results of your
segmentation process.
You can get the new version from the cvs repository.
Note that this code may change a lot in the next couple of days
(Kishore and I will be fixing various parts of the code).
Arnaud
On Jun 7, 2009, at 6:12 PM, Sgouritsa, Eleni wrote:
> What I understand is that the result should be independent of how we
> define the distance function (negative inside or outside). And if we
> initialize the level set totally inside the data , the level set
> should expand according to equation (7) of the paper where you
> describe the method, whereas if we initialize outside it should
> shrink. In insight journal it happens like that but not in the itk
> release.
> Thank you very much,
> Eleni
>
>
> -----Original Message-----
> From: Sgouritsa, Eleni
> Sent: Sun 6/7/2009 3:30 PM
> To: Kishore Mosaliganti
> Cc: Luis Ibanez; insight-users at itk.org
> Subject: RE: [Insight-users]
> itkScalarChanAndVeseSparseLevelSetImageFilter
>
> Hello,
> thank you very much for the help. Unfortunately I work with medical
> data that I am not supposed to give.
> Can you explain a little more point 2. You mean that I have to
> define my level set as inside positive and outside negative to have
> the opposite propagation direction?
> I tried it but it did not work. I both cases, if I initialize the LS
> inside the boundary of my data, it shrinks. I use mu=0, nu=0, l1=1
> and l2=1. Do I need negative l1?When I initialize almost the whole
> LS outside my data it seems to work in some cases.Generally, I get
> different results from the insight journal that I was getting correct.
>
> Thank you,
> Eleni
>
>
> -----Original Message-----
> From: Kishore Mosaliganti [mailto:kishoreraom at gmail.com]
> Sent: Fri 6/5/2009 1:02 PM
> To: Sgouritsa, Eleni
> Cc: Luis Ibanez; insight-users at itk.org
> Subject: Re: [Insight-users]
> itkScalarChanAndVeseSparseLevelSetImageFilter
>
> Hi Eleni,
>
> Thank you for pointing out these problems. You are right that the
> Review
> code is not very stable as yet. We are working on fixing them.
> During the
> transfer from the IJ paper to the Review directory, a lot of
> modifications
> were made. We might have inadvertently introduced new errors.
>
> Regarding your problems:
>
> 2. The level-set function is defined by convention as inside is
> negative and
> outside is positive. So the negative values become your foreground and
> positive values become the background. This controls the propagation
> direction.
>
> 3. I am looking at the Halt function. Looks like the boundary case
> of 0
> iterations is not coded right.
>
> 4. Regarding the high RMS values, the level-set function is re-
> initialized
> to a signed distance function after every few iterations. It so
> happens that
> the default setting is 1 iteration. Hence, the RMS change is being
> calculated after the reinitialization while it needs to be done
> before. We
> are also working on correcting this. Thank you for pointing this out.
>
>
> Is it possible for you to post a small sample of your data for us to
> work on
> the errors.
>
>
> Kishore
>
> On Tue, Jun 2, 2009 at 11:24 AM, Sgouritsa, Eleni
> <esgourit at central.uh.edu>wrote:
>
> > Hello,
> > I m sorry if my point was not clear. The problems that I am facing
> using
> > this class to segment 3D data are the following:
> >
> > 1. My data has negative origin (for example (-100, -100, -60).
> Unless I do
> > SetOrigin(0,0,0) (or I guess any origin >=0) my program crashes. I
> have to
> > set my negative origin as zero for my program to run. Does the
> class assumes
> > positive origin of the input image?
> >
> > 2. I initialize my level set inside (so the evolution should be
> outwards).
> > In this case I can not make my level set expand (it can just
> shrink, or not
> > move). I think I should use something like
> SetReverseExpansionDirection to
> > control the propagation direction, but I can not find this option
> in the
> > class public members. (This is currently my main problem where I
> am stuck,
> > any help would be very useful!)
> >
> > 3. The maximum RMS Error serves (along with the number of
> iterations) as a
> > stopping criteria inside the Halt function (of
> > itkMultiphaseFiniteDifferenceImageFilter.txx file).
> > Lets say I set maximum RMS Error = 0.01.
> > The Halt function returns the following:
> > return ( (this->GetElapsedIterations() >= this-
> >m_NumberOfIterations) ||
> > ( this->GetMaximumRMSError() >= m_RMSChange ) );
> > While the Halt function returns false the evolution continues.
> > However, in iteration 0, I get m_RMSChange = 0, so the evolution
> always
> > stops doing 0 iterations (since the condition this-
> >GetMaximumRMSError() >=
> > m_RMSChange becomes true)
> > If I modify the Halt function to returm the following:
> > if(this->GetElapsedIterations()==0)
> > return false;
> > else
> > return ( (this->GetElapsedIterations() >=
> > this->m_NumberOfIterations) || ( this->GetMaximumRMSError() >=
> m_RMSChange )
> > );
> > then it works.
> > The other problem is that RMSChange in the next iterations
> (1,2,3...) has
> > very big values (like 5000) even near convergence. So the only way
> to stop
> > the evolution is through the iterations number.
> >
> > I am still investigating the class and I am not absolutely sure
> about the
> > points mentioned but I would like to share with you for more advice.
> >
> >
> > Thank you very much,
> > Lena
> >
> >
> >
> >
> > -----Original Message-----
> > From: Luis Ibanez [mailto:luis.ibanez at kitware.com<luis.ibanez at kitware.com
> >
> > ]
> > Sent: Mon 6/1/2009 8:39 PM
> > To: Sgouritsa, Eleni
> > Cc: alex gouaillard; insight-users at itk.org
> > Subject: Re: [Insight-users]
> itkScalarChanAndVeseSparseLevelSetImageFilter
> >
> >
> > Hi Lena,
> >
> > Could you please be more specific about your problem report on
> > item (2) ?
> >
> > Is there a chance that you can report this in a form that
> > we could reproduce ?
> >
> >
> > Thanks
> >
> >
> > Luis
> >
> >
> > -----------------------------
> > Sgouritsa, Eleni wrote:
> > > Hi,
> > >
> > > I have two more questions.
> > > 1. In the insight journal code there was an option
> > > SetReverseExpansionDirection to control if the expansion of the
> level
> > > set will be inwards or outwards. How can I do it using the
> > > itkScalarChanAndVeseSparseLevelSetImageFilter of 3.14 release?
> > >
> > > 2. I still have a problem when my 3D data have negative origin.
> > >
> > > Thanks and regards,
> > > Lena
> > >
> > > -----Original Message-----
> > > From: Sgouritsa, Eleni
> > > Sent: Mon 6/1/2009 4:00 AM
> > > To: alex gouaillard
> > > Cc: insight-users at itk.org
> > > Subject: RE: [Insight-users]
> > itkScalarChanAndVeseSparseLevelSetImageFilter
> > >
> > > Hello,
> > > finally the second issue was my fault (I just had a problem while
> > > including the header files of the review folder).
> > > For the first, the inconsistency is just a matter of name. The
> code runs
> > > correctly, just the name assignement in the txx is a little
> misleading.
> > >
> > > Thank you very much,
> > > Lena
> > >
> > >
> > > -----Original Message-----
> > > From: alex gouaillard
> [mailto:alexandre_gouaillard at hms.harvard.edu<alexandre_gouaillard at hms.harvard.edu
> >
> > ]
> > > Sent: Sun 5/31/2009 11:34 PM
> > > To: Sgouritsa, Eleni
> > > Cc: insight-users at itk.org
> > > Subject: Re: [Insight-users]
> > itkScalarChanAndVeseSparseLevelSetImageFilter
> > >
> > > hi eleni,
> > >
> > > we'll take a look tomorrow.
> > >
> > > thanks for the feedback.
> > >
> > > alex.
> > >
> > > On May 31, 2009, at 11:52 PM, Sgouritsa, Eleni wrote:
> > >
> > > > Hello,
> > > > I know that the review folder of the new release (3.14) is not
> > > > stable yet but I would just like to give two comments:
> > > >
> > > > 1. I found an inconsistency between the template arguments of
> the
> > > > itkScalarChanAndVeseSparseLevelSetImageFilter.h and the
> > > > itkScalarChanAndVeseSparseLevelSetImageFilter.txx.
> > > > Specifically, in the header file, the template is :
> > > > template < class TInputImage, class TFeatureImage, class
> > > > TOutputImage, class TFunction,
> > > > class TSharedData, typename TIdCell = unsigned int >
> > > > whereas in the txx it is:
> > > > template < class TInput, class TFeature, class TFunction,
> > > > class TOutputPixel, class TSharedData, typename TIdCell >
> > > > There is a change in the order of the 3rd and 4th argument.
> > > >
> > > > 2. I can not find this class
> > > > (itkScalarChanAndVeseSparseLevelSetImageFilter) incuded in the
> > > > CMakeLists of the review folder
> > > >
> > > > Regards,
> > > > Lena
> > > >
> > > > <ATT00001.txt>
> > >
> > >
> > >
> > >
> > >
> ------------------------------------------------------------------------
> > >
> > > _____________________________________
> > > Powered by www.kitware.com
> > >
> > > Visit other Kitware open-source projects at
> > > http://www.kitware.com/opensource/opensource.html
> > >
> > > Please keep messages on-topic and check the ITK FAQ at:
> > http://www.itk.org/Wiki/ITK_FAQ
> > >
> > > Follow this link to subscribe/unsubscribe:
> > > http://www.itk.org/mailman/listinfo/insight-users
> >
> >
> > _____________________________________
> > Powered by www.kitware.com
> >
> > Visit other Kitware open-source projects at
> > http://www.kitware.com/opensource/opensource.html
> >
> > Please keep messages on-topic and check the ITK FAQ at:
> > http://www.itk.org/Wiki/ITK_FAQ
> >
> > Follow this link to subscribe/unsubscribe:
> > http://www.itk.org/mailman/listinfo/insight-users
> >
> >
>
>
>
> <ATT00001.txt>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.itk.org/pipermail/insight-users/attachments/20090607/56420601/attachment.htm>
More information about the Insight-users
mailing list