[ITK-users] Install problem on Windows 7

Fri Dec 15 21:33:24 EST 2017

I usually disable the security prompts, they are too annoying. That might
not matter on Win10 (I am running Win7).

I am CC'ing the mailing list, so if someone comes across this again they
can see what the solutions was.

I have seen you shared xaas.tif. I will look into that next time I go to
the office.

Regards,
Dženan

On Fri, Dec 15, 2017 at 9:25 PM, Gib Bogle <g.bogle at auckland.ac.nz> wrote:

> I just realised that I was mistaken in thinking that VS was truncating the
> install directory name.  It's just that the long filename was split over
> two lines.  Duh! Now it seems that in fact it is a permissions issue, as
> you suggested.  Although I have administrator rights, when I do things in
> some C: directories I am asked if I want to continue - to verify that I am
> using my administrator permission.  It seems that at some stage the VS
> install wants to set permissions on
>
> ITKConfig.cmake, for some reason.
>
>
> I have now opened VS2010 by "Run as administrator", and successfully
> completed the install.
>
>
> Thanks for your help.  By the way, did you see that I've put xaas.rar
> (compressed form of xaas.tif) on the Kitware data site?  For some peculiar
> reason some of my posts on the Discourse site are being hidden, apparently
> being flagged by several members as spam.  I have no idea what is causiing
> that.
>
>
> Cheers
> Gib
> ------------------------------
> *From:* Dženan Zukić <dzenanz at gmail.com>
> *Sent:* Saturday, 16 December 2017 2:18 p.m.
> *To:* Gib Bogle; Insight-users
> *Subject:* Re: [ITK-users] Install problem on Windows 7
>
> Hi Gib,
>
> are you running Visual Studio (or whatever is your make tool, e.g. ninja)
> as administrator? I suppose writing in Program Files requires
> administrative privileges. The Linux equivalent is make install does not
> work, so you need to do sudo make install.
>
> Regards,
> Dženan
>
> On Fri, Dec 15, 2017 at 8:08 PM, Gib Bogle <g.bogle at auckland.ac.nz> wrote:
>
>> Hi Dzenan,
>>
>>
>> I just updated cmake to 3.10, and went though the build procedure again.
>> This is CMAKE_INSTALL_PREFIX:
>>
>> C:/Program Files/ITK4.12.2
>>
>> and this is the install error message:
>>
>> 143>  -- Install configuration: "Release"
>> 143>  -- Up-to-date: C:/Program Files/ITK4.12.2/lib/cmake/ITK-
>> 4.12/ITKConfig.cmake
>> 143>  CMake Error at cmake_install.cmake:36 (file):
>> 143>    file INSTALL cannot set permissions on "C:/Program
>> 143>    Files/ITK4.12.2/lib/cmake/ITK-4.12/ITKConfig.cmake"
>>
>>
>> (C:/Program Files/itk4.12.2 already exists)  I've never had problems with
>> cmake before.  This is bizarre.
>>
>>
>> What version of VS are you using?
>>
>>
>> Cheers
>>
>> Gib
>> ------------------------------
>> *From:* Dženan Zukić <dzenanz at gmail.com>
>> *Sent:* Saturday, 16 December 2017 12:52 p.m.
>> *To:* Gib Bogle
>> *Cc:* insight-users
>> *Subject:* Re: [ITK-users] Install problem on Windows 7
>>
>> Hi Gib,
>>
>> as installing into C:/Program Files/ITK prefix works for me, it must be
>> the CMake version. Fortunately, updating CMake is easy.
>>
>> Regards,
>> Dženan
>>
>> On Fri, Dec 15, 2017 at 5:15 PM, Gib Bogle <g.bogle at auckland.ac.nz>
>> wrote:
>>
>>> I spoke too soon.  I saw the install proceeding successfully, and leapt
>>> to the conclusion that it was putting the files in the right place (I'd got
>>> the mistaken idea that C:/Program Files/ITK4.12.2 was the default install
>>> directory, by misinterpreting cmake_install.cmake).  So the directories -
>>> bin, include, lib, share - were all created under D:/.  No big deal to copy
>>> them to C:/Program Files/ITK4.12.2, but this is clearly an issue.  Has
>>> anybody else encountered this?
>>> ------------------------------
>>> *From:* Insight-users <insight-users-bounces at itk.org> on behalf of Gib
>>> Bogle <g.bogle at auckland.ac.nz>
>>> *Sent:* Saturday, 16 December 2017 10:49 a.m.
>>> *To:* insight-users
>>> *Subject:* [FORGED] Re: [ITK-users] Install problem on Windows 7
>>>
>>>
>>> If I leave the CMAKE_INSTALL_PREFIX blank, it installs correctly (in the
>>> same place I specified).  It must be a cmake bug - no problem once you know
>>> how to avoid it.
>>> ------------------------------
>>> *From:* Insight-users <insight-users-bounces at itk.org> on behalf of Gib
>>> Bogle <g.bogle at auckland.ac.nz>
>>> *Sent:* Saturday, 16 December 2017 10:14 a.m.
>>> *To:* insight-users
>>> *Subject:* [FORGED] [ITK-users] Install problem on Windows 7
>>>
>>>
>>> I've been using ITK4.8.0, which I built two years ago, so I decided to
>>> build 4.12.2, in case something has been fixed since then.
>>>
>>>
>>> Following exactly the same procedure with cmake-gui as before, and
>>> setting CMAKE_INSTALL_PREFIX as
>>>
>>> C:/Program Files/ITK4.12.2
>>>
>>> everything goes fine (building with VS2010 Win64) until the actual
>>> install step of copying the files to the install directory.  The error
>>> message is:
>>>
>>>
>>> 135>  -- Install configuration: "Release"
>>> 135>  CMake Error at cmake_install.cmake:31 (file):
>>> 135>    file cannot create directory: C:/Program
>>> 135>    Files/ITK4.12.2/lib/cmake/ITK-4.12.  Maybe need administrative
>>> privileges.
>>>
>>>
>>> Clearly the CMAKE_INSTALL_PREFIX is not being treated correctly, and the
>>> space is terminating the directory name.  I tried putting quotes around it,
>>> but that produced a similar but even more strange result - cmake had
>>> inserted a ';', making the directory C:/Program;Files/ITK4.12.2
>>>
>>> Is this an issue with the cmake version?  I am using cmake 3.0.2.
>>>
>>>
>>> I considered copying all the files by hand, but I'm not sure if that's
>>> really feasible.
>>>
>>> The ITK community is transitioning from this mailing list to
>>> discourse.itk.org. Please join us there!
>>> ________________________________
>>> Powered by www.kitware.com
>>>
>>> Visit other Kitware open-source projects at
>>> http://www.kitware.com/opensource/opensource.html
>>>
>>> Kitware offers ITK Training Courses, for more information visit:
>>> http://www.kitware.com/products/protraining.php
>>>
>>> Please keep messages on-topic and check the ITK FAQ at:
>>> http://www.itk.org/Wiki/ITK_FAQ
>>>
>>> Follow this link to subscribe/unsubscribe:
>>> https://itk.org/mailman/listinfo/insight-users
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://itk.org/pipermail/insight-users/attachments/20171215/bf43469e/attachment.html>