ITK  5.2.0
Insight Toolkit
Examples/DataRepresentation/Mesh/MeshCellVisitor.cxx
/*=========================================================================
*
* Copyright NumFOCUS
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0.txt
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
*=========================================================================*/
// Software Guide : BeginLatex
//
// In order to facilitate access to particular cell types, a convenience
// mechanism has been built-in on the \doxygen{Mesh}. This mechanism is
// based on the \emph{Visitor Pattern} presented in \cite{Gamma1995}. The
// visitor pattern is designed to facilitate the process of walking through
// an heterogeneous list of objects sharing a common base class.
//
// The first requirement for using the \code{CellVisitor} mechanism it to
// include the \code{CellInterfaceVisitor} header file.
//
// \index{itk::Mesh!CellVisitor}
// \index{itk::Mesh!CellInterfaceVisitor}
// \index{CellVisitor}
// \index{CellInterfaceVisitor}
//
// Software Guide : EndLatex
#include "itkMesh.h"
#include "itkLineCell.h"
// Software Guide : BeginCodeSnippet
// Software Guide : EndCodeSnippet
// Software Guide : BeginLatex
//
// The typical mesh types are now declared.
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
using PixelType = float;
using MeshType = itk::Mesh<PixelType, 3>;
using CellType = MeshType::CellType;
using VertexType = itk::VertexCell<CellType>;
using LineType = itk::LineCell<CellType>;
using TriangleType = itk::TriangleCell<CellType>;
using TetrahedronType = itk::TetrahedronCell<CellType>;
// Software Guide : EndCodeSnippet
// Software Guide : BeginLatex
//
// Then, a custom CellVisitor class should be declared. In this particular
// example, the visitor class is intended to act only on \code{TriangleType}
// cells. The only requirement on the declaration of the visitor class is
// that it must provide a method named \code{Visit()}. This method expects as
// arguments a cell identifier and a pointer to the \emph{specific} cell type
// for which this visitor is intended. Nothing prevents a visitor class from
// providing \code{Visit()} methods for several different cell types. The
// multiple methods will be differentiated by the natural C++ mechanism of
// function overload. The following code illustrates a minimal cell visitor
// class.
//
// \index{itk::Mesh!CellInterfaceVisitor}
// \index{CellInterfaceVisitor!requirements}
// \index{CellInterfaceVisitor!Visit()}
//
// Software Guide : EndLatex
#ifndef __CustomTriangleVisitor
# define __CustomTriangleVisitor
// Software Guide : BeginCodeSnippet
class CustomTriangleVisitor
{
public:
using TriangleType = itk::TriangleCell<CellType>;
void
Visit(unsigned long cellId, TriangleType * t)
{
std::cout << "Cell # " << cellId << " is a TriangleType ";
std::cout << t->GetNumberOfPoints() << std::endl;
}
CustomTriangleVisitor() = default;
virtual ~CustomTriangleVisitor() = default;
};
// Software Guide : EndCodeSnippet
#endif
int
main(int, char *[])
{
MeshType::Pointer mesh = MeshType::New();
// Creating the points and inserting them in the mesh
//
point0[0] = -1;
point0[1] = -1;
point0[2] = -1;
point1[0] = 1;
point1[1] = 1;
point1[2] = -1;
point2[0] = 1;
point2[1] = -1;
point2[2] = 1;
point3[0] = -1;
point3[1] = 1;
point3[2] = 1;
mesh->SetPoint(0, point0);
mesh->SetPoint(1, point1);
mesh->SetPoint(2, point2);
mesh->SetPoint(3, point3);
// Creating and associating the Tetrahedron
//
CellType::CellAutoPointer cellpointer;
cellpointer.TakeOwnership(new TetrahedronType);
cellpointer->SetPointId(0, 0);
cellpointer->SetPointId(1, 1);
cellpointer->SetPointId(2, 2);
cellpointer->SetPointId(3, 3);
mesh->SetCell(0, cellpointer);
// Creating and associating the Triangles
//
cellpointer.TakeOwnership(new TriangleType);
cellpointer->SetPointId(0, 0);
cellpointer->SetPointId(1, 1);
cellpointer->SetPointId(2, 2);
mesh->SetCell(1, cellpointer);
cellpointer.TakeOwnership(new TriangleType);
cellpointer->SetPointId(0, 0);
cellpointer->SetPointId(1, 2);
cellpointer->SetPointId(2, 3);
mesh->SetCell(2, cellpointer);
cellpointer.TakeOwnership(new TriangleType);
cellpointer->SetPointId(0, 0);
cellpointer->SetPointId(1, 3);
cellpointer->SetPointId(2, 1);
mesh->SetCell(3, cellpointer);
cellpointer.TakeOwnership(new TriangleType);
cellpointer->SetPointId(0, 3);
cellpointer->SetPointId(1, 2);
cellpointer->SetPointId(2, 1);
mesh->SetCell(4, cellpointer);
// Creating and associating the Edges
//
cellpointer.TakeOwnership(new LineType);
cellpointer->SetPointId(0, 0);
cellpointer->SetPointId(1, 1);
mesh->SetCell(5, cellpointer);
cellpointer.TakeOwnership(new LineType);
cellpointer->SetPointId(0, 1);
cellpointer->SetPointId(1, 2);
mesh->SetCell(6, cellpointer);
cellpointer.TakeOwnership(new LineType);
cellpointer->SetPointId(0, 2);
cellpointer->SetPointId(1, 0);
mesh->SetCell(7, cellpointer);
cellpointer.TakeOwnership(new LineType);
cellpointer->SetPointId(0, 1);
cellpointer->SetPointId(1, 3);
mesh->SetCell(8, cellpointer);
cellpointer.TakeOwnership(new LineType);
cellpointer->SetPointId(0, 3);
cellpointer->SetPointId(1, 2);
mesh->SetCell(9, cellpointer);
cellpointer.TakeOwnership(new LineType);
cellpointer->SetPointId(0, 3);
cellpointer->SetPointId(1, 0);
mesh->SetCell(10, cellpointer);
// Creating and associating the Vertices
//
cellpointer.TakeOwnership(new VertexType);
cellpointer->SetPointId(0, 0);
mesh->SetCell(11, cellpointer);
cellpointer.TakeOwnership(new VertexType);
cellpointer->SetPointId(0, 1);
mesh->SetCell(12, cellpointer);
cellpointer.TakeOwnership(new VertexType);
cellpointer->SetPointId(0, 2);
mesh->SetCell(13, cellpointer);
cellpointer.TakeOwnership(new VertexType);
cellpointer->SetPointId(0, 3);
mesh->SetCell(14, cellpointer);
// Simple verification of the number of points and cells inserted
//
std::cout << "# Points= " << mesh->GetNumberOfPoints() << std::endl;
std::cout << "# Cell = " << mesh->GetNumberOfCells() << std::endl;
// Software Guide : BeginLatex
//
// \index{itk::Mesh!Cell\-Interface\-Visitor\-Implementation}
// \index{itk::Mesh!CellInterfaceVisitor}
// \index{itk::Mesh!CellVisitor}
// \index{CellVisitor}
//
// This newly defined class will now be used to instantiate a cell visitor.
// In this particular example we create a class
// \code{CustomTriangleVisitor} which will be invoked each time a triangle
// cell is found while the mesh iterates over the cells.
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
using TriangleVisitorInterfaceType =
MeshType::CellTraits,
TriangleType,
CustomTriangleVisitor>;
// Software Guide : EndCodeSnippet
// Software Guide : BeginLatex
//
// Note that the actual \code{CellInterfaceVisitorImplementation} is
// templated over the PixelType, the CellTraits, the CellType to be visited
// and the Visitor class that defines with will be done with the cell.
//
// A visitor implementation class can now be created using the normal
// invocation to its \code{New()} method and assigning the result to a
// \doxygen{SmartPointer}.
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
TriangleVisitorInterfaceType::Pointer triangleVisitor =
TriangleVisitorInterfaceType::New();
// Software Guide : EndCodeSnippet
// Software Guide : BeginLatex
//
// Many different visitors can be configured in this way. The set of all
// visitors can be registered with the MultiVisitor class provided for the
// mesh. An instance of the MultiVisitor class will walk through the cells
// and delegate action to every registered visitor when the appropriate
// cell type is encountered.
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
using CellMultiVisitorType = CellType::MultiVisitor;
CellMultiVisitorType::Pointer multiVisitor = CellMultiVisitorType::New();
// Software Guide : EndCodeSnippet
// Software Guide : BeginLatex
//
// The visitor is registered with the Mesh using the \code{AddVisitor()}
// method.
//
// \index{itk::Mesh!AddVisitor()}
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
multiVisitor->AddVisitor(triangleVisitor);
// Software Guide : EndCodeSnippet
// Software Guide : BeginLatex
//
// Finally, the iteration over the cells is triggered by calling the method
// \code{Accept()} on the \code{itk::Mesh}.
//
// \index{itk::Mesh!Accept()}
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
mesh->Accept(multiVisitor);
// Software Guide : EndCodeSnippet
// Software Guide : BeginLatex
//
// The \code{Accept()} method will iterate over all the cells and for each
// one will invite the MultiVisitor to attempt an action on the cell. If no
// visitor is interested on the current cell type the cell is just ignored
// and skipped.
//
// MultiVisitors make it possible to add behavior to the cells without
// having to create new methods on the cell types or creating a complex
// visitor class that knows about every CellType.
//
// Software Guide : EndLatex
return EXIT_SUCCESS;
}
itk::VertexCell
Represents a single vertex for a Mesh.
Definition: itkVertexCell.h:39
itk::GTest::TypedefsAndConstructors::Dimension2::PointType
ImageBaseType::PointType PointType
Definition: itkGTestTypedefsAndConstructors.h:51
itkLineCell.h
itk::TriangleCell::GetNumberOfPoints
unsigned int GetNumberOfPoints() const override
itk::TetrahedronCell
TetrahedronCell represents a tetrahedron for a Mesh.
Definition: itkTetrahedronCell.h:37
itk::CellInterfaceVisitorImplementation
A template class used to implement a visitor object.
Definition: itkCellInterfaceVisitor.h:100
itkMesh.h
itk::TriangleCell
Definition: itkTriangleCell.h:45
itk::LineCell
Represents a line segment for a Mesh.
Definition: itkLineCell.h:42
itk::Mesh
Implements the N-dimensional mesh structure.
Definition: itkMesh.h:114
itkCellInterfaceVisitor.h
itkTetrahedronCell.h