SphinxExamples/src/Core/Transform/GlobalRegistrationTwoImagesAffine/Code.cxx

/*=========================================================================
 *
 *  Copyright NumFOCUS
 *
 *  Licensed under the Apache License, Version 2.0 (the "License");
 *  you may not use this file except in compliance with the License.
 *  You may obtain a copy of the License at
 *
 *         http://www.apache.org/licenses/LICENSE-2.0.txt
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS,
 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 *=========================================================================*/
#include "itkCastImageFilter.h"
#include "itkEllipseSpatialObject.h"
#include "itkImage.h"
#include "itkImageRegistrationMethod.h"
#include "itkLinearInterpolateImageFunction.h"
#include "itkImageFileReader.h"
#include "itkImageFileWriter.h"
#include "itkMeanSquaresImageToImageMetric.h"
#include "itkRegularStepGradientDescentOptimizer.h"
#include "itkResampleImageFilter.h"
#include "itkRescaleIntensityImageFilter.h"
#include "itkSpatialObjectToImageFilter.h"
#include "itkAffineTransform.h"
 
constexpr unsigned int Dimension = 2;
using PixelType = unsigned char;
 
using ImageType = itk::Image<PixelType, Dimension>;
 
static void
CreateEllipseImage(ImageType::Pointer image);
static void
CreateSphereImage(ImageType::Pointer image);
 
int
main(int, char *[])
{
  //  The transform that will map the fixed image into the moving image.
  using TransformType = itk::AffineTransform<double, Dimension>;
 
  //  An optimizer is required to explore the parameter space of the transform
  //  in search of optimal values of the metric.
  using OptimizerType = itk::RegularStepGradientDescentOptimizer;
 
  //  The metric will compare how well the two images match each other. Metric
  //  types are usually parameterized by the image types as it can be seen in
  //  the following type declaration.
  using MetricType = itk::MeanSquaresImageToImageMetric<ImageType, ImageType>;
 
  //  Finally, the type of the interpolator is declared. The interpolator will
  //  evaluate the intensities of the moving image at non-grid positions.
  using InterpolatorType = itk::LinearInterpolateImageFunction<ImageType, double>;
 
  //  The registration method type is instantiated using the types of the
  //  fixed and moving images. This class is responsible for interconnecting
  //  all the components that we have described so far.
  using RegistrationType = itk::ImageRegistrationMethod<ImageType, ImageType>;
 
  // Create components
  MetricType::Pointer       metric = MetricType::New();
  TransformType::Pointer    transform = TransformType::New();
  OptimizerType::Pointer    optimizer = OptimizerType::New();
  InterpolatorType::Pointer interpolator = InterpolatorType::New();
  RegistrationType::Pointer registration = RegistrationType::New();
 
  // Each component is now connected to the instance of the registration method.
  registration->SetMetric(metric);
  registration->SetOptimizer(optimizer);
  registration->SetTransform(transform);
  registration->SetInterpolator(interpolator);
 
  // Get the two images
  ImageType::Pointer fixedImage = ImageType::New();
  ImageType::Pointer movingImage = ImageType::New();
 
  CreateSphereImage(fixedImage);
  CreateEllipseImage(movingImage);
 
  // Write the two synthetic inputs
  using WriterType = itk::ImageFileWriter<ImageType>;
 
  WriterType::Pointer fixedWriter = WriterType::New();
  fixedWriter->SetFileName("fixed.png");
  fixedWriter->SetInput(fixedImage);
  fixedWriter->Update();
 
  WriterType::Pointer movingWriter = WriterType::New();
  movingWriter->SetFileName("moving.png");
  movingWriter->SetInput(movingImage);
  movingWriter->Update();
 
  // Set the registration inputs
  registration->SetFixedImage(fixedImage);
  registration->SetMovingImage(movingImage);
 
  registration->SetFixedImageRegion(fixedImage->GetLargestPossibleRegion());
 
  //  Initialize the transform
  using ParametersType = RegistrationType::ParametersType;
  ParametersType initialParameters(transform->GetNumberOfParameters());
 
  // rotation matrix
  initialParameters[0] = 1.0; // R(0,0)
  initialParameters[1] = 0.0; // R(0,1)
  initialParameters[2] = 0.0; // R(1,0)
  initialParameters[3] = 1.0; // R(1,1)
 
  // translation vector
  initialParameters[4] = 0.0;
  initialParameters[5] = 0.0;
 
  registration->SetInitialTransformParameters(initialParameters);
 
  optimizer->SetMaximumStepLength(.1); // If this is set too high, you will get a
  //"itk::ERROR: MeanSquaresImageToImageMetric(0xa27ce70): Too many samples map outside moving image buffer: 1818 /
  // 10000" error
 
  optimizer->SetMinimumStepLength(0.01);
 
  // Set a stopping criterion
  optimizer->SetNumberOfIterations(200);
 
  // Connect an observer
  // CommandIterationUpdate::Pointer observer = CommandIterationUpdate::New();
  // optimizer->AddObserver( itk::IterationEvent(), observer );
 
  try
  {
    registration->Update();
  }
  catch (itk::ExceptionObject & err)
  {
    std::cerr << "ExceptionObject caught !" << std::endl;
    std::cerr << err << std::endl;
    return EXIT_FAILURE;
  }
 
  //  The result of the registration process is an array of parameters that
  //  defines the spatial transformation in an unique way. This final result is
  //  obtained using the \code{GetLastTransformParameters()} method.
 
  ParametersType finalParameters = registration->GetLastTransformParameters();
  std::cout << "Final parameters: " << finalParameters << std::endl;
 
  //  The value of the image metric corresponding to the last set of parameters
  //  can be obtained with the \code{GetValue()} method of the optimizer.
 
  const double bestValue = optimizer->GetValue();
 
  // Print out results
  //
  std::cout << "Result = " << std::endl;
  std::cout << " Metric value  = " << bestValue << std::endl;
 
  //  It is common, as the last step of a registration task, to use the
  //  resulting transform to map the moving image into the fixed image space.
  //  This is easily done with the \doxygen{ResampleImageFilter}.
 
  using ResampleFilterType = itk::ResampleImageFilter<ImageType, ImageType>;
 
  ResampleFilterType::Pointer resampler = ResampleFilterType::New();
  resampler->SetInput(movingImage);
 
  //  The Transform that is produced as output of the Registration method is
  //  also passed as input to the resampling filter. Note the use of the
  //  methods \code{GetOutput()} and \code{Get()}. This combination is needed
  //  here because the registration method acts as a filter whose output is a
  //  transform decorated in the form of a \doxygen{DataObject}. For details in
  //  this construction you may want to read the documentation of the
  //  \doxygen{DataObjectDecorator}.
 
  resampler->SetTransform(registration->GetOutput()->Get());
 
  //  As described in Section \ref{sec:ResampleImageFilter}, the
  //  ResampleImageFilter requires additional parameters to be specified, in
  //  particular, the spacing, origin and size of the output image. The default
  //  pixel value is also set to a distinct gray level in order to highlight
  //  the regions that are mapped outside of the moving image.
 
  resampler->SetSize(fixedImage->GetLargestPossibleRegion().GetSize());
  resampler->SetOutputOrigin(fixedImage->GetOrigin());
  resampler->SetOutputSpacing(fixedImage->GetSpacing());
  resampler->SetOutputDirection(fixedImage->GetDirection());
  resampler->SetDefaultPixelValue(100);
 
  //  The output of the filter is passed to a writer that will store the
  //  image in a file. An \doxygen{CastImageFilter} is used to convert the
  //  pixel type of the resampled image to the final type used by the
  //  writer. The cast and writer filters are instantiated below.
 
  using CastFilterType = itk::CastImageFilter<ImageType, ImageType>;
 
  WriterType::Pointer     writer = WriterType::New();
  CastFilterType::Pointer caster = CastFilterType::New();
  writer->SetFileName("output.png");
 
  caster->SetInput(resampler->GetOutput());
  writer->SetInput(caster->GetOutput());
  writer->Update();
 
  return EXIT_SUCCESS;
}
 
void
CreateEllipseImage(ImageType::Pointer image)
{
  using EllipseType = itk::EllipseSpatialObject<Dimension>;
 
  using SpatialObjectToImageFilterType = itk::SpatialObjectToImageFilter<EllipseType, ImageType>;
 
  SpatialObjectToImageFilterType::Pointer imageFilter = SpatialObjectToImageFilterType::New();
 
  ImageType::SizeType size;
  size[0] = 100;
  size[1] = 100;
 
  imageFilter->SetSize(size);
 
  ImageType::SpacingType spacing;
  spacing.Fill(1);
  imageFilter->SetSpacing(spacing);
 
  EllipseType::Pointer   ellipse = EllipseType::New();
  EllipseType::ArrayType radiusArray;
  radiusArray[0] = 10;
  radiusArray[1] = 20;
  ellipse->SetRadiusInObjectSpace(radiusArray);
 
  using TransformType = EllipseType::TransformType;
  TransformType::Pointer transform = TransformType::New();
  transform->SetIdentity();
 
  TransformType::OutputVectorType translation;
  translation[0] = 65;
  translation[1] = 45;
  transform->Translate(translation, false);
 
  ellipse->SetObjectToParentTransform(transform);
 
  imageFilter->SetInput(ellipse);
 
  ellipse->SetDefaultInsideValue(255);
  ellipse->SetDefaultOutsideValue(0);
  imageFilter->SetUseObjectValue(true);
  imageFilter->SetOutsideValue(0);
 
  imageFilter->Update();
 
  image->Graft(imageFilter->GetOutput());
}
 
void
CreateSphereImage(ImageType::Pointer image)
{
  using EllipseType = itk::EllipseSpatialObject<Dimension>;
 
  using SpatialObjectToImageFilterType = itk::SpatialObjectToImageFilter<EllipseType, ImageType>;
 
  SpatialObjectToImageFilterType::Pointer imageFilter = SpatialObjectToImageFilterType::New();
 
  ImageType::SizeType size;
  size[0] = 100;
  size[1] = 100;
 
  imageFilter->SetSize(size);
 
  ImageType::SpacingType spacing;
  spacing.Fill(1);
  imageFilter->SetSpacing(spacing);
 
  EllipseType::Pointer   ellipse = EllipseType::New();
  EllipseType::ArrayType radiusArray;
  radiusArray[0] = 10;
  radiusArray[1] = 10;
  ellipse->SetRadiusInObjectSpace(radiusArray);
 
  using TransformType = EllipseType::TransformType;
  TransformType::Pointer transform = TransformType::New();
  transform->SetIdentity();
 
  TransformType::OutputVectorType translation;
  translation[0] = 50;
  translation[1] = 50;
  transform->Translate(translation, false);
 
  ellipse->SetObjectToParentTransform(transform);
 
  imageFilter->SetInput(ellipse);
 
  ellipse->SetDefaultInsideValue(255);
  ellipse->SetDefaultOutsideValue(0);
  imageFilter->SetUseObjectValue(true);
  imageFilter->SetOutsideValue(0);
 
  imageFilter->Update();
 
  image->Graft(imageFilter->GetOutput());
}