ITK/Getting Started/Build/Linux: Difference between revisions

From KitwarePublic
Jump to navigationJump to search
No edit summary
No edit summary
 
(2 intermediate revisions by one other user not shown)
Line 1: Line 1:
Once you have download ITK source code with this terminal command for example :
{{ Historical }}
 
To get the latest ITK source code, you must use git. If you do not have git installed, please install it from your package manager:
 
sudo apt-get install git
 
Moreover, you will need to add the cmake user interface with :
 
sudo apt-get install cmake-curses-gui
 
Once done, you need to download ITK source code with this terminal command:


  git clone https://itk.org/ITK.git
  git clone https://itk.org/ITK.git
Line 5: Line 15:
you will need to create a bin directory in the ITK directory:
you will need to create a bin directory in the ITK directory:


  $ sudo mkdir bin
  $ mkdir bin


Change directory to the binary directory, and run the CMake configuration tool
Change directory to the binary directory, and run the CMake configuration tool


  $ cd bin
  $ cd bin
  $ sudo ccmake -DITK_USE_REVIEW=ON ..
  $ ccmake ..
 
Initially, you get the CMake interface with an "EMPTY CACHE" message. Press "c" to configure.


Configure now with these settings :
Initially, you get the CMake interface with an "EMPTY CACHE" message. Press "c" to configure with default settings and then "g" to generate the Makefiles. (If the "g" command is not available, you may need to press "c" to configure again). This will also exit CMake if successful.  
BUILD_DOXYGEN                  *OFF
BUILD_EXAMPLES                  *ON
BUILD_SHARED_LIBS              *ON
BUILD_TESTING                  *ON
CMAKE_BACKWARDS_COMPATIBILITY  *2.4
CMAKE_BUILD_TYPE                *Release
CMAKE_INSTALL_PREFIX            */usr/local
ITK_USE_KWSTYLE                *OFF


Press "c" to configure. Because of the command line option <tt>-DITK_USE_REVIEW=ON</tt> that we used above to build the "Review" files too, a warning message is displayed.
<hr>
If it's still not work, just quit with "q" and retry a  


 
''$ ccmake ..''
Press "e" to exit the help screen, and then "g" to generate the Makefiles. (If the "g" command is not available, you may need to press "c" to configure again). This will also exit CMake if successful. If it's still not work, just quit with "q" and retry to configure with :
 
''$ sudo ccmake -DITK_USE_REVIEW=OFF ..''


and press "g" if it appears, if not, "c" and then "g".
and press "g" if it appears, if not, "c" and then "g".
<hr>




Then, run <tt>make</tt> to compile ITK
Then, run <tt>make</tt> to compile ITK


  $ sudo make -j4
  $ make -j4


The <tt>-j4</tt> option will use parallel compilation if you have more than 1 processor. Compilation will take for a long time, even on a fast desktop (I have 4 processors, 16G of RAM and a 64 bit architecture). Once it finishes successfully you can install the files. Note that with the options above, the files will be installed to the same places where the Ubuntu package would put them.
The <tt>-j4</tt> option will use parallel compilation if you have more than 1 processor. Compilation will take for a long time, even on a fast desktop (I have 4 processors, 16G of RAM and a 64 bit architecture). Once it finishes successfully you can install the files. Note that with the options above, the files will be installed to the same places where the Ubuntu package would put them.


  $ sudo make install
  $ sudo make install
=Software Guide=
If you need more support, feel free to consult the ITK Software Guide here : https://itk.org/ITKSoftwareGuide/html/Book1/ITKSoftwareGuide-Book1ch2.html#x27-170002

Latest revision as of 15:01, 17 October 2018

To get the latest ITK source code, you must use git. If you do not have git installed, please install it from your package manager:

sudo apt-get install git 

Moreover, you will need to add the cmake user interface with :

sudo apt-get install cmake-curses-gui

Once done, you need to download ITK source code with this terminal command:

git clone https://itk.org/ITK.git

you will need to create a bin directory in the ITK directory:

$ mkdir bin

Change directory to the binary directory, and run the CMake configuration tool

$ cd bin
$ ccmake ..

Initially, you get the CMake interface with an "EMPTY CACHE" message. Press "c" to configure with default settings and then "g" to generate the Makefiles. (If the "g" command is not available, you may need to press "c" to configure again). This will also exit CMake if successful.


If it's still not work, just quit with "q" and retry a

$ ccmake ..

and press "g" if it appears, if not, "c" and then "g".



Then, run make to compile ITK

$ make -j4

The -j4 option will use parallel compilation if you have more than 1 processor. Compilation will take for a long time, even on a fast desktop (I have 4 processors, 16G of RAM and a 64 bit architecture). Once it finishes successfully you can install the files. Note that with the options above, the files will be installed to the same places where the Ubuntu package would put them.

$ sudo make install


Software Guide

If you need more support, feel free to consult the ITK Software Guide here : https://itk.org/ITKSoftwareGuide/html/Book1/ITKSoftwareGuide-Book1ch2.html#x27-170002