[Insight-users] installation problem

Julien Jomier jjomier@cs.unc.edu
Thu, 21 Nov 2002 13:51:22 -0500 

Imho,

The ITK_BINARY_PATH should point to the *ITK Binary* folder 
not the *source* one.
When you run CMake on the Insight Directory this will create a new
directory where binary data can be found. 
You should set the ITK_BINARY_PATH to this last directory in your
example.

Julien

> -----Original Message-----
> From: imho [mailto:imho@skynet.be] 
> Sent: Thursday, November 21, 2002 1:39 PM
> To: Julien Jomier
> Cc: 'itk'
> Subject: Re: [Insight-users] installation problem
> 
> 
> the itk_binary_path points to the itk main folder.
> Do I have to go further? (lib builded in itk\bin\debug )
> If I do that cmake don't find the useitk.cmake
> 
> Thanks
> 
> 
> Julien Jomier wrote:
> 
> > I would say first problem with Qt solved.
> >
> > Well it seems that now the example couldn't find the ITK 
> include path. 
> > Could you check if the ITK_BINARY_PATH is pointing to the right 
> > directory when you run CMake.
> > If that doesn't work could you send us the CMakeCache.txt
> >
> > Thanks
> >
> > Julien
> >
> >
> > >-----Original Message-----
> > >From: insight-users-admin@public.kitware.com
> > >[mailto:insight-users-admin@public.kitware.com] On Behalf Of imho
> > >Sent: Thursday, November 21, 2002 1:03 PM
> > >To: itk
> > >Subject: Re: [Insight-users] installation problem
> > >
> > >
> > >yes, and now I have this :
> > >
> > >C:\internet\VTK\ITK\InsightToolkit-1.0.0\Examples\QtITK\bin\..
> > >/itkQtAdaptor.h(21)
> > >: fatal error C1083: Cannot open include file: 
> 'itkObject.h': No such 
> > >file or directory moc_itkQtLightIndicator.cxx
> > >C:\internet\VTK\ITK\InsightToolkit-1.0.0\Examples\QtITK\bin\..
> > >/itkQtLightIndicator.h(3)
> > >: fatal error C1083: Cannot open include file:
> > >'itkCommand.h': No such
> > >file or directory
> > >itkQtProgressBar.cxx
> > >C:\internet\VTK\ITK\InsightToolkit-1.0.0\Examples\QtITK\itkQtP
> > >rogressBar.cxx(20)
> > >: fatal error C1083: Cannot open include file:
> > >'itkProcessObject.h': No
> > >such file or directory
> > >qtITK.cxx
> > >C:\internet\VTK\ITK\InsightToolkit-1.0.0\Examples\QtITK\qtITK.
> > >cxx(24) :
> > >fatal error C1083: Cannot open include file: 'itkImage.h': No
> > >such file
> > >or directory
> > >
> > >one first problem solved?
> > >Do I have to do something similar with itk?
> > >
> > >Thanks
> > >
> > >
> > >Julien Jomier wrote:
> > >
> > >
> > >>Did you try to replace the two lines in the CMakeLists.txt ?
> > >>
> > >>
> > >>
> > >>>-----Original Message-----
> > >>>From: imho [mailto:imho@skynet.be]
> > >>>Sent: Thursday, November 21, 2002 12:52 PM
> > >>>To: Julien Jomier
> > >>>Cc: 'Luis Ibanez'; insight-users@public.kitware.com
> > >>>Subject: Re: [Insight-users] installation problem
> > >>>
> > >>>
> > >>>Hi Julien,
> > >>>I have cmake version 1.4 patch 5 and qt 2.3
> > >>>What should I do so?
> > >>>
> > >>>Thanks for helping
> > >>>
> > >>>Julien Jomier wrote:
> > >>>
> > >>>
> > >>>
> > >>>>Hi imho,
> > >>>>
> > >>>>What version of CMake are you using ?
> > >>>>
> > >>>>The thing is that ${QT_INCLUDE_PATH}
> > >>>>has been replaced by ${QT_INCLUDE_DIR}
> > >>>>in the latest version of CMake (cvs one)
> > >>>>
> > >>>>Try to replace
> > >>>>
> > >>>>INCLUDE_DIRECTORIES(
> > >>>>${QT_INCLUDE_DIR}
> > >>>>)
> > >>>>
> > >>>>by
> > >>>>
> > >>>>INCLUDE_DIRECTORIES(
> > >>>>${QT_INCLUDE_PATH}
> > >>>>)
> > >>>>
> > >>>>in the CMakeLists.txt
> > >>>>
> > >>>>Could you also tell us what version of Qt you are using,
> > >
> > >because I
> > >
> > >>>>think this example was tested only with Qt3 and I'm having
> > >>>
> > >>>compilation
> > >>>
> > >>>
> > >>>>problems with Qt2.3 NC.
> > >>>>
> > >>>>Let us know if you are having the same problem.
> > >>>>
> > >>>>Thanks for reporting this
> > >>>>
> > >>>>Julien
> > >>>>
> > >>>>
> > >>>>
> > >>>>
> > >>>>>-----Original Message-----
> > >>>>>From: insight-users-admin@public.kitware.com
> > >>>>>[mailto:insight-users-admin@public.kitware.com] On 
> Behalf Of imho
> > >>>>>Sent: Thursday, November 21, 2002 11:40 AM
> > >>>>>To: Luis Ibanez
> > >>>>>Cc: insight-users@public.kitware.com
> > >>>>>Subject: Re: [Insight-users] installation problem
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>>Hi,
> > >>>>>I've tried to compile the examples with the workspace from
> > >>>
> > >>>cmake, but
> > >>>
> > >>>
> > >>>>>I always have errors, like for example with qtitk :
> > >>>>>
> > >>>>>C:\internet\VTK\ITK\InsightToolkit-1.0.0\Examples\QtITK\bin\..
> > >>>>>/itkQtAdaptor.h(20)
> > >>>>>: fatal error C1083: Cannot open include file:
> > >>>
> > >>>'qobject.h': No such
> > >>>
> > >>>
> > >>>>>file or directory
> > >>>>>moc_itkQtLightIndicator.cxx 
> > >>>>>C:\internet\VTK\ITK\InsightToolkit-1.0.0\Examples\QtITK\bin\..
> > >>>>>/itkQtLightIndicator.h(2)
> > >>>>>: fatal error C1083: Cannot open include file:
> > >
> > >'qbutton.h': No such
> > >
> > >>>>>file or directory
> > >>>>>itkQtProgressBar.cxx 
> > >>>>>C:\internet\VTK\ITK\InsightToolkit-1.0.0\Examples\QtITK\itkQtP
> > >>>>>rogressBar.cxx(20)
> > >>>>>: fatal error C1083: Cannot open include file:
> > >>>>>'itkProcessObject.h': No
> > >>>>>such file or directory
> > >>>>>qtITK.cxx 
> > >>>>>C:\internet\VTK\ITK\InsightToolkit-1.0.0\Examples\QtITK\qtITK.
> > >>>>>cxx(20) :
> > >>>>>fatal error C1083: Cannot open include file:
> > >>>>>'qapplication.h': No such
> > >>>>>file or directory
> > >>>>>
> > >>>>>but I have noticed the paths with cmake, so I don't
> > >
> > >understand...
> > >
> > >>>>>(the .h are in the include qt repertory, mentioned with cmake)
> > >>>>>
> > >>>>>Thank you for any helping
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>>imho wrote:
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>>>Hi,
> > >>>>>>thanks a lot for your answers, I'll follow your advices
> > >>>
> > >>>and let you
> > >>>
> > >>>
> > >>>>>>know  if I progress
> > >>>>>>
> > >>>>>>
> > >>>>>>Luis Ibanez wrote:
> > >>>>>>
> > >>>>>>
> > >>>>>>
> > >>>>>>
> > >>>>>>>Hi imho,
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>You certainly can configure manually your project
> > >>>>>>
> > >>>>>>>from the IDE of VisualC++ but...
> > >>>>>>
> > >>>>>>
> > >>>>>>>it will be pretty painful to get it right.
> > >>>>>>>
> > >>>>>>>Using CMake is the most efficient way to do it.
> > >>>>>>>
> > >>>>>>>One of the remarkable reasons for using CMake to
> > >
> > >configure your
> > >
> > >>>>>>>project is that otherwise it will result almost 
> impossible to 
> > >>>>>>>move your project to another computer in the future
> > >
> > >since all the
> > >
> > >>>>>>>paths are handwriten in the VC++ GUI.  You may
> > >>>>>>>have already verified how fun it is to browse on
> > >>>>>>>the tiny textbox in Project/Settings looking for
> > >>>>>>>a directory among a list of 20 or 30 others...  :-)
> > >>>>>>>
> > >>>>>>>CMake will use your CMakeLists.txt file and generate
> > >>>>>>>a consistent .dsw workspace for VisualC++. ( and remember to 
> > >>>>>>>refrain yourself for making any changes in this
> > >
> > >workspace. since
> > >
> > >>>>>>>it is generated, any changes
> > >>>>>
> > >>>>>should be made
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>>>>on the CMakeLists.txt file and then rerun CMake)
> > >>>>>>>
> > >>>>>>>----
> > >>>>>>>
> > >>>>>>>If you are combining VTK + Qt + ITK there is
> > >>>>>>>even more important to use CMake. There are
> > >>>>>>>example applications in the Insight/Applications
> > >
> > >directory that
> > >
> > >>>>>>>illustrate how to combine easily ITK with Qt and with VTK.
> > >>>>>>>
> > >>>>>>>You may want to look at
> > >>>>>>>
> > >>>>>>>Insight/Applications/QtITK  (for ITK+Qt)
> > >>>>>>>
> > >>>>>>>and any of the following for ITK + VTK
> > >>>>>>>
> > >>>>>>>Insight/Applications/ThinPlatesSplines
> > >>>>>>>Insight/Applications/ThresholdSegmentationLevelSet
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>Please let us know if you have further questions.
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>Thanks,
> > >>>>>>>
> > >>>>>>>
> > >>>>>>> Luis
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>=====================================================
> > >>>>>>>
> > >>>>>>>imho wrote:
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>>Hi,
> > >>>>>>>>I'm installing the 1.0 version, and I used the pdf step
> > >>>>>
> > >>>>>to step,
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>>>>>but I've try to compile my project under visual c++. Is it 
> > >>>>>>>>possible? Or
> > >>>>>>>
> > >>>>>>>do I
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>>have to use cmake?
> > >>>>>>>>
> > >>>>>>>>Thanks
> > >>>>>>>>
> > >>>>>>>>PS : to combine QT + VTK + ITK isn't a piece of cake ;)
> > >>>>>>>>
> > >>>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>_______________________________________________
> > >>>>>>Insight-users mailing list Insight-users@public.kitware.com 
> > >>>>>>http://public.kitware.com/mailman/listinfo/insight-users
> > >>>>>>
> > >>>>>>
> > >>>>>
> > >>>>>_______________________________________________
> > >>>>>Insight-users mailing list Insight-users@public.kitware.com 
> > >>>>>http://public.kitware.com/mailman/listinfo/ins> ight-users
> > >>>>>
> > >>>>
> > >>>>
> > >>>>_______________________________________________
> > >>>>Insight-users mailing list Insight-users@public.kitware.com
> > >>>>http://public.kitware.com/mailman/listinfo/insight-users
> > >>>>
> > >>>>
> > >>>
> > >>
> > >>
> > >_______________________________________________
> > >Insight-users mailing list
> > >Insight-users@public.kitware.com 
> > >http://public.kitware.com/mailman/listinfo/insight-users
> > >
> >
> >
> > _______________________________________________
> > Insight-users mailing list
> > Insight-users@public.kitware.com 
> > http://public.kitware.com/mailman/listinfo/insight-users
> >
> >
>