Computes a list of PolyLineParametricPath objects from the contours in a 2D image. More...
#include <itkContourExtractor2DImageFilter.h>
Computes a list of PolyLineParametricPath objects from the contours in a 2D image.
Uses the "marching squares" method to compute a the iso-valued contours of the input 2D image for a given intensity value. Multiple outputs may be produced because an image can have multiple contours at a given level, so it is advised to call GetNumberOfOutputs() and GetOutput(n) to retrieve all of the contours. The contour value to be extracted can be set with SetContourValue(). Image intensities will be linearly interpolated to provide sub-pixel resolution for the output contours.
The marching squares algorithm is a special case of the marching cubes algorithm (Lorensen, William and Harvey E. Cline. Marching Cubes: A High Resolution 3D Surface Construction Algorithm. Computer Graphics (SIGGRAPH 87 Proceedings) 21(4) July 1987, p. 163-170). A simple explanation is available here: http://www.essi.fr/~lingrand/MarchingCubes/algo.html
There is a single ambiguous case in the marching squares algorithm: if a given 2x2-pixel square has two high-valued and two low-valued pixels, each pair diagonally adjacent. (Where high- and low-valued is with respect to the contour value sought.) In this case, either the high-valued pixels can be connected into the same "object" (where groups of pixels encircled by a given contour are considered an object), or the low-valued pixels can be connected. This is the "face connected" versus "face + vertex connected" (or 4- versus 4-connected) distinction: high-valued pixels most be treated as one, and low-valued as the other. By default, high-valued pixels are treated as "face-connected" and low-valued pixels are treated as "face + vertex" connected. To reverse this, call VertexConnectHighPixelsOn();
Outputs are not guaranteed to be closed paths: contours which intersect the image edge will be left open. All other paths will be closed. (The closed-ness of a path can be tested by checking whether the beginning point is the same as the end point.)
Produced paths are oriented. Following the path from beginning to end, image intensity values lower than the contour value are to the left of the path and intensity values grater than the contour value are to the right. In other words, the image gradient at a path segment is (approximately) in the direct of that segment rotated right by 90 degrees, because the image intensity values increase from left-to-right across the segment. This means that the generated contours will circle clockwise around "hills" of above-contour-value intensity, and counter-clockwise around "depressions" of below-contour-value intensity. This convention can be reversed by calling ReverseContourOrientationOn().
By default the input image's largest possible region will be processed; call SetRequestedRegion() to process a different region, or ClearRequestedRegion() to revert to the default value. Note that the requested regions are usually set on the output; however since paths have no notion of a "region", this must be set at the filter level.
This class was contributed to the Insight Journal by Zachary Pincus. http://insight-journal.org/midas/handle.php?handle=1926/165
Definition at line 92 of file itkContourExtractor2DImageFilter.h.
typedef SmartPointer<const Self> itk::ContourExtractor2DImageFilter< TInputImage >::ConstPointer |
Reimplemented from itk::ImageToPathFilter< TInputImage, PolyLineParametricPath< 2 > >.
Definition at line 108 of file itkContourExtractor2DImageFilter.h.
typedef DataObject::Pointer itk::PathSource< PolyLineParametricPath< 2 > >::DataObjectPointer [inherited] |
Smart Pointer type to a DataObject.
Reimplemented from itk::ProcessObject.
Definition at line 50 of file itkPathSource.h.
typedef std::vector<DataObjectPointer> itk::ProcessObject::DataObjectPointerArray [inherited] |
STL Array of SmartPointers to DataObjects
Definition at line 103 of file itkProcessObject.h.
typedef DataObjectPointerArray::size_type itk::ProcessObject::DataObjectPointerArraySizeType [inherited] |
Size type of an std::vector
Definition at line 112 of file itkProcessObject.h.
typedef InputImageType::ConstPointer itk::ImageToPathFilter< TInputImage, PolyLineParametricPath< 2 > >::InputImageConstPointer [inherited] |
Definition at line 53 of file itkImageToPathFilter.h.
typedef InputImageType::PixelType itk::ImageToPathFilter< TInputImage, PolyLineParametricPath< 2 > >::InputImagePixelType [inherited] |
Definition at line 55 of file itkImageToPathFilter.h.
typedef InputImageType::Pointer itk::ContourExtractor2DImageFilter< TInputImage >::InputImagePointer |
Image and path typedef support.
Reimplemented from itk::ImageToPathFilter< TInputImage, PolyLineParametricPath< 2 > >.
Definition at line 114 of file itkContourExtractor2DImageFilter.h.
typedef InputImageType::RegionType itk::ImageToPathFilter< TInputImage, PolyLineParametricPath< 2 > >::InputImageRegionType [inherited] |
Definition at line 54 of file itkImageToPathFilter.h.
typedef TInputImage itk::ContourExtractor2DImageFilter< TInputImage >::InputImageType |
Convenient typedefs for simplifying declarations.
Reimplemented from itk::ImageToPathFilter< TInputImage, PolyLineParametricPath< 2 > >.
Definition at line 101 of file itkContourExtractor2DImageFilter.h.
typedef InputImageType::IndexType itk::ContourExtractor2DImageFilter< TInputImage >::InputIndexType |
Definition at line 119 of file itkContourExtractor2DImageFilter.h.
typedef InputImageType::OffsetType itk::ContourExtractor2DImageFilter< TInputImage >::InputOffsetType |
Definition at line 120 of file itkContourExtractor2DImageFilter.h.
typedef InputImageType::PixelType itk::ContourExtractor2DImageFilter< TInputImage >::InputPixelType |
Definition at line 118 of file itkContourExtractor2DImageFilter.h.
typedef NumericTraits<InputPixelType>::RealType itk::ContourExtractor2DImageFilter< TInputImage >::InputRealType |
Real type associated to the input pixel type.
Definition at line 127 of file itkContourExtractor2DImageFilter.h.
typedef InputImageType::RegionType itk::ContourExtractor2DImageFilter< TInputImage >::InputRegionType |
Definition at line 121 of file itkContourExtractor2DImageFilter.h.
typedef int itk::LightObject::InternalReferenceCountType [protected, inherited] |
Define the type of the reference count according to the target. This allows the use of atomic operations
Definition at line 139 of file itkLightObject.h.
typedef OutputPathType::IndexType itk::PathSource< PolyLineParametricPath< 2 > >::OutputPathIndexType [inherited] |
Definition at line 63 of file itkPathSource.h.
typedef OutputPathType::InputType itk::PathSource< PolyLineParametricPath< 2 > >::OutputPathInputType [inherited] |
Definition at line 61 of file itkPathSource.h.
typedef OutputPathType::OffsetType itk::PathSource< PolyLineParametricPath< 2 > >::OutputPathOffsetType [inherited] |
Definition at line 64 of file itkPathSource.h.
typedef OutputPathType::OutputType itk::PathSource< PolyLineParametricPath< 2 > >::OutputPathOutputType [inherited] |
Definition at line 62 of file itkPathSource.h.
typedef OutputPathType::Pointer itk::ContourExtractor2DImageFilter< TInputImage >::OutputPathPointer |
Reimplemented from itk::PathSource< PolyLineParametricPath< 2 > >.
Definition at line 122 of file itkContourExtractor2DImageFilter.h.
typedef PolyLineParametricPath<2> itk::ContourExtractor2DImageFilter< TInputImage >::OutputPathType |
Some convenient typedefs.
Reimplemented from itk::PathSource< PolyLineParametricPath< 2 > >.
Definition at line 102 of file itkContourExtractor2DImageFilter.h.
typedef SmartPointer<Self> itk::ContourExtractor2DImageFilter< TInputImage >::Pointer |
Reimplemented from itk::ImageToPathFilter< TInputImage, PolyLineParametricPath< 2 > >.
Definition at line 107 of file itkContourExtractor2DImageFilter.h.
typedef ContourExtractor2DImageFilter itk::ContourExtractor2DImageFilter< TInputImage >::Self |
Standard class typedefs.
Reimplemented from itk::ImageToPathFilter< TInputImage, PolyLineParametricPath< 2 > >.
Definition at line 105 of file itkContourExtractor2DImageFilter.h.
typedef ImageToPathFilter<InputImageType, OutputPathType> itk::ContourExtractor2DImageFilter< TInputImage >::Superclass |
Reimplemented from itk::ImageToPathFilter< TInputImage, PolyLineParametricPath< 2 > >.
Definition at line 106 of file itkContourExtractor2DImageFilter.h.
typedef VertexListType::ConstPointer itk::ContourExtractor2DImageFilter< TInputImage >::VertexListConstPointer |
Definition at line 130 of file itkContourExtractor2DImageFilter.h.
typedef OutputPathType::VertexListType itk::ContourExtractor2DImageFilter< TInputImage >::VertexListType |
Definition at line 124 of file itkContourExtractor2DImageFilter.h.
typedef OutputPathType::VertexType itk::ContourExtractor2DImageFilter< TInputImage >::VertexType |
Definition at line 123 of file itkContourExtractor2DImageFilter.h.
itk::ContourExtractor2DImageFilter< TInputImage >::ContourExtractor2DImageFilter | ( | ) | [protected] |
virtual itk::ContourExtractor2DImageFilter< TInputImage >::~ContourExtractor2DImageFilter | ( | ) | [protected, virtual] |
virtual void itk::ProcessObject::AbortGenerateDataOff | ( | ) | [virtual, inherited] |
virtual void itk::ProcessObject::AbortGenerateDataOn | ( | ) | [virtual, inherited] |
Turn on and off the AbortGenerateData flag.
virtual void itk::ProcessObject::AddInput | ( | DataObject * | input | ) | [protected, virtual, inherited] |
Protected methods for setting inputs. Subclasses make use of them for setting input.
unsigned long itk::Object::AddObserver | ( | const EventObject & | event, | |
Command * | ||||
) | [inherited] |
Allow people to add/remove/invoke observers (callbacks) to any ITK object. This is an implementation of the subject/observer design pattern. An observer is added by specifying an event to respond to and an itk::Command to execute. It returns an unsigned long tag which can be used later to remove the event or retrieve the command. The memory for the Command becomes the responsibility of this object, so don't pass the same instance of a command to two different objects
unsigned long itk::Object::AddObserver | ( | const EventObject & | event, | |
Command * | ||||
) | const [inherited] |
Allow people to add/remove/invoke observers (callbacks) to any ITK object. This is an implementation of the subject/observer design pattern. An observer is added by specifying an event to respond to and an itk::Command to execute. It returns an unsigned long tag which can be used later to remove the event or retrieve the command. The memory for the Command becomes the responsibility of this object, so don't pass the same instance of a command to two different objects
virtual void itk::ProcessObject::AddOutput | ( | DataObject * | output | ) | [protected, virtual, inherited] |
Protected methods for setting outputs. Subclasses make use of them for getting output.
static void itk::LightObject::BreakOnError | ( | ) | [static, inherited] |
This method is called when itkExceptionMacro executes. It allows the debugger to break on error.
virtual void itk::ProcessObject::CacheInputReleaseDataFlags | ( | ) | [protected, virtual, inherited] |
Cache the state of any ReleaseDataFlag's on the inputs. While the filter is executing, we need to set the ReleaseDataFlag's on the inputs to false in case the current filter is implemented using a mini-pipeline (which will try to release the inputs). After the filter finishes, we restore the state of the ReleaseDataFlag's before the call to ReleaseInputs().
void itk::ContourExtractor2DImageFilter< TInputImage >::ClearRequestedRegion | ( | ) |
Control whether the largest possible input region is used, or if a custom requested region is to be used.
virtual LightObject::Pointer itk::Object::CreateAnother | ( | ) | const [virtual, inherited] |
Create an object from an instance, potentially deferring to a factory. This method allows you to create an instance of an object that is exactly the same type as the referring object. This is useful in cases where an object has been cast back to a base class.
Reimplemented from itk::LightObject.
Reimplemented in itk::BSplineDeformableTransform< TScalarType, NDimensions, VSplineOrder >, itk::CreateObjectFunction< T >, itk::TransformFactoryBase, itk::AnalyzeImageIOFactory, itk::BioRadImageIOFactory, itk::BMPImageIOFactory, itk::Brains2MaskImageIOFactory, itk::DICOMImageIO2Factory, itk::DicomImageIOFactory, itk::GDCMImageIOFactory, itk::GE4ImageIOFactory, itk::GE5ImageIOFactory, itk::GEAdwImageIOFactory, itk::GiplImageIOFactory, itk::JPEGImageIOFactory, itk::LSMImageIOFactory, itk::MetaImageIOFactory, itk::NiftiImageIOFactory, itk::NrrdImageIOFactory, itk::PNGImageIOFactory, itk::RawImageIOFactory< TPixel, VImageDimension >, itk::SiemensVisionImageIOFactory, itk::StimulateImageIOFactory, itk::TIFFImageIOFactory, itk::VTKImageIOFactory, itk::Bruker2DSEQImageIOFactory, itk::MatlabTransformIOFactory, itk::MINC2ImageIOFactory, itk::MRCImageIOFactory, itk::PhilipsRECImageIOFactory, itk::TxtTransformIOFactory, itk::VoxBoCUBImageIOFactory, itk::VTKImageIO2Factory, and itk::SpatialObjectFactoryBase.
virtual void itk::Object::DebugOff | ( | ) | const [virtual, inherited] |
Turn debugging output off.
virtual void itk::Object::DebugOn | ( | ) | const [virtual, inherited] |
Turn debugging output on.
virtual void itk::LightObject::Delete | ( | ) | [virtual, inherited] |
Delete an itk object. This method should always be used to delete an object when the new operator was used to create it. Using the C delete method will not work with reference counting.
virtual void itk::ProcessObject::EnlargeOutputRequestedRegion | ( | DataObject * | ) | [inline, virtual, inherited] |
Give the process object a chance to indictate that it will produce more output than it was requested to produce. For example, many imaging filters must compute the entire output at once or can only produce output in complete slices. Such filters cannot handle smaller requested regions. These filters must provide an implementation of this method, setting the output requested region to the size they will produce. By default, a process object does not modify the size of the output requested region.
Reimplemented in itk::CurvatureFlowImageFilter< TInputImage, TOutputImage >, itk::ExtensionVelocitiesImageFilter< TLevelSet, TAuxValue, VAuxDimension >, itk::FastMarchingExtensionImageFilter< TLevelSet, TAuxValue, VAuxDimension, TSpeedImage >, itk::FastMarchingImageFilter< TLevelSet, TSpeedImage >, itk::FFTComplexConjugateToRealImageFilter< TPixel, VDimension >, itk::FFTRealToComplexConjugateImageFilter< TPixel, VDimension >, itk::ImagePCAShapeModelEstimator< TInputImage, TOutputImage >, itk::IsoContourDistanceImageFilter< TInputImage, TOutputImage >, itk::IsolatedWatershedImageFilter< TInputImage, TOutputImage >, itk::KLMRegionGrowImageFilter< TInputImage, TOutputImage >, itk::MRFImageFilter< TInputImage, TClassifiedImage >, itk::MultiResolutionPDEDeformableRegistration< TFixedImage, TMovingImage, TDeformationField, TRealType >, itk::ReinitializeLevelSetImageFilter< TLevelSet >, itk::VoronoiSegmentationImageFilterBase< TInputImage, TOutputImage, TBinaryPriorImage >, itk::WatershedImageFilter< TInputImage >, itk::BlackTopHatImageFilter< TInputImage, TOutputImage, TKernel >, itk::BSplineDecompositionImageFilter< TInputImage, TOutputImage >, itk::ClosingByReconstructionImageFilter< TInputImage, TOutputImage, TKernel >, itk::ConfidenceConnectedImageFilter< TInputImage, TOutputImage >, itk::ConnectedComponentImageFilter< TInputImage, TOutputImage, TMaskImage >, itk::ConnectedThresholdImageFilter< TInputImage, TOutputImage >, itk::ContourDirectedMeanDistanceImageFilter< TInputImage1, TInputImage2 >, itk::ContourMeanDistanceImageFilter< TInputImage1, TInputImage2 >, itk::DirectedHausdorffDistanceImageFilter< TInputImage1, TInputImage2 >, itk::DoubleThresholdImageFilter< TInputImage, TOutputImage >, itk::ExtractOrthogonalSwath2DImageFilter< TImage >, itk::GradientMagnitudeRecursiveGaussianImageFilter< TInputImage, TOutputImage >, itk::GradientRecursiveGaussianImageFilter< TInputImage, TOutputImage >, itk::GrayscaleConnectedClosingImageFilter< TInputImage, TOutputImage >, itk::GrayscaleConnectedOpeningImageFilter< TInputImage, TOutputImage >, itk::GrayscaleFillholeImageFilter< TInputImage, TOutputImage >, itk::GrayscaleGeodesicDilateImageFilter< TInputImage, TOutputImage >, itk::GrayscaleGeodesicErodeImageFilter< TInputImage, TOutputImage >, itk::GrayscaleGrindPeakImageFilter< TInputImage, TOutputImage >, itk::GrayscaleMorphologicalClosingImageFilter< TInputImage, TOutputImage, TKernel >, itk::GrayscaleMorphologicalOpeningImageFilter< TInputImage, TOutputImage, TKernel >, itk::HausdorffDistanceImageFilter< TInputImage1, TInputImage2 >, itk::HConcaveImageFilter< TInputImage, TOutputImage >, itk::HConvexImageFilter< TInputImage, TOutputImage >, itk::HessianRecursiveGaussianImageFilter< TInputImage, TOutputImage >, itk::HMaximaImageFilter< TInputImage, TOutputImage >, itk::HMinimaImageFilter< TInputImage, TOutputImage >, itk::HoughTransform2DCirclesImageFilter< TInputPixelType, TOutputPixelType >, itk::HoughTransform2DLinesImageFilter< TInputPixelType, TOutputPixelType >, itk::ImportImageFilter< TPixel, VImageDimension >, itk::IsolatedConnectedImageFilter< TInputImage, TOutputImage >, itk::LabelStatisticsImageFilter< TInputImage, TLabelImage >, itk::LaplacianRecursiveGaussianImageFilter< TInputImage, TOutputImage >, itk::MinimumMaximumImageFilter< TInputImage >, itk::NeighborhoodConnectedImageFilter< TInputImage, TOutputImage >, itk::OpeningByReconstructionImageFilter< TInputImage, TOutputImage, TKernel >, itk::OrientImageFilter< TInputImage, TOutputImage >, itk::ReconstructionImageFilter< TInputImage, TOutputImage, TCompare >, itk::RecursiveSeparableImageFilter< TInputImage, TOutputImage >, itk::RegionOfInterestImageFilter< TInputImage, TOutputImage >, itk::SimilarityIndexImageFilter< TInputImage1, TInputImage2 >, itk::SmoothingRecursiveGaussianImageFilter< TInputImage, TOutputImage >, itk::StatisticsImageFilter< TInputImage >, itk::TobogganImageFilter< TInputImage >, itk::VectorConfidenceConnectedImageFilter< TInputImage, TOutputImage >, itk::WhiteTopHatImageFilter< TInputImage, TOutputImage, TKernel >, itk::ImageFileReader< TOutputImage, ConvertPixelTraits >, itk::ImageSeriesReader< TOutputImage >, itk::AttributeMorphologyBaseImageFilter< TInputImage, TOutputImage, TAttribute, TFunction >, itk::BinaryContourImageFilter< TInputImage, TOutputImage >, itk::BinaryImageToLabelMapFilter< TInputImage, TOutputImage >, itk::BinaryImageToShapeLabelMapFilter< TInputImage, TOutputImage >, itk::BinaryImageToStatisticsLabelMapFilter< TInputImage, TFeatureImage, TOutputImage >, itk::BinaryShapeKeepNObjectsImageFilter< TInputImage >, itk::BinaryShapeOpeningImageFilter< TInputImage >, itk::BinaryStatisticsKeepNObjectsImageFilter< TInputImage, TFeatureImage >, itk::BinaryStatisticsOpeningImageFilter< TInputImage, TFeatureImage >, itk::ChangeRegionLabelMapFilter< TInputImage >, itk::LabelContourImageFilter< TInputImage, TOutputImage >, itk::LabelImageToLabelMapFilter< TInputImage, TOutputImage >, itk::LabelImageToShapeLabelMapFilter< TInputImage, TOutputImage >, itk::LabelImageToStatisticsLabelMapFilter< TInputImage, TFeatureImage, TOutputImage >, itk::LabelMapFilter< TInputImage, TOutputImage >, itk::LabelMapToBinaryImageFilter< TInputImage, TOutputImage >, itk::LabelShapeKeepNObjectsImageFilter< TInputImage >, itk::LabelShapeOpeningImageFilter< TInputImage >, itk::LabelStatisticsKeepNObjectsImageFilter< TInputImage, TFeatureImage >, itk::LabelStatisticsOpeningImageFilter< TInputImage, TFeatureImage >, itk::MorphologicalWatershedFromMarkersImageFilter< TInputImage, TLabelImage >, itk::MorphologicalWatershedImageFilter< TInputImage, TOutputImage >, itk::MultiScaleHessianBasedMeasureImageFilter< TInputImage, THessianImage, TOutputImage >, itk::RegionalMaximaImageFilter< TInputImage, TOutputImage >, itk::RegionalMinimaImageFilter< TInputImage, TOutputImage >, itk::ShapeRelabelImageFilter< TInputImage >, itk::SliceBySliceImageFilter< TInputImage, TOutputImage, TInputFilter, TOutputFilter, TInternalInputImage, TInternalOutputImage >, itk::StatisticsRelabelImageFilter< TInputImage, TFeatureImage >, itk::ValuedRegionalExtremaImageFilter< TInputImage, TOutputImage, TFunction1, TFunction2 >, itk::VoronoiSegmentationImageFilterBase< TInputImage, TOutputImage >, itk::ReconstructionImageFilter< TInputImage, TOutputImage, std::greater< TOutputImage::PixelType > >, itk::ReconstructionImageFilter< TInputImage, TOutputImage, std::less< TOutputImage::PixelType > >, itk::AttributeMorphologyBaseImageFilter< TInputImage, TOutputImage, TAttribute, std::less< TInputImage::PixelType > >, itk::AttributeMorphologyBaseImageFilter< TInputImage, TOutputImage, TAttribute, std::greater< TInputImage::PixelType > >, itk::LabelMapFilter< TInputImage, TInputImage >, itk::LabelMapFilter< TImage, TImage >, itk::ValuedRegionalExtremaImageFilter< TInputImage, TOutputImage, std::greater< TInputImage::PixelType >, std::greater< TOutputImage::PixelType > >, and itk::ValuedRegionalExtremaImageFilter< TInputImage, TOutputImage, std::less< TInputImage::PixelType >, std::less< TOutputImage::PixelType > >.
Definition at line 225 of file itkProcessObject.h.
void itk::ContourExtractor2DImageFilter< TInputImage >::GenerateData | ( | void | ) | [protected, virtual] |
This method causes the filter to generate its output.
Reimplemented from itk::ProcessObject.
virtual void itk::ContourExtractor2DImageFilter< TInputImage >::GenerateInputRequestedRegion | ( | ) | throw (InvalidRequestedRegionError) [protected, virtual] |
ContourExtractor2DImageFilter manually controls the input requested region via SetRequestedRegion and ClearRequestedRegion, so it must override the superclass method.
Reimplemented from itk::ProcessObject.
virtual void itk::ProcessObject::GenerateOutputInformation | ( | ) | [protected, virtual, inherited] |
Generate the information decribing the output data. The default implementation of this method will copy information from the input to the output. A filter may override this method if its output will have different information than its input. For instance, a filter that shrinks an image will need to provide an implementation for this method that changes the spacing of the pixels. Such filters should call their superclass' implementation of this method prior to changing the information values they need (i.e. GenerateOutputInformation() should call Superclass::GenerateOutputInformation() prior to changing the information.
Reimplemented in itk::BayesianClassifierImageFilter< TInputVectorImage, TLabelsType, TPosteriorsPrecisionType, TPriorsPrecisionType >, itk::BayesianClassifierInitializationImageFilter< TInputImage, TProbabilityPrecisionType >, itk::BinaryMask3DMeshSource< TInputImage, TOutputMesh >, itk::FastMarchingExtensionImageFilter< TLevelSet, TAuxValue, VAuxDimension, TSpeedImage >, itk::FastMarchingImageFilter< TLevelSet, TSpeedImage >, itk::FFTComplexConjugateToRealImageFilter< TPixel, VDimension >, itk::FFTRealToComplexConjugateImageFilter< TPixel, VDimension >, itk::MRFImageFilter< TInputImage, TClassifiedImage >, itk::MultiResolutionPDEDeformableRegistration< TFixedImage, TMovingImage, TDeformationField, TRealType >, itk::MultiResolutionPyramidImageFilter< TInputImage, TOutputImage >, itk::PDEDeformableRegistrationFilter< TFixedImage, TMovingImage, TDeformationField >, itk::VoronoiDiagram2DGenerator< TCoordType >, itk::AccumulateImageFilter< TInputImage, TOutputImage >, itk::BinaryMaskToNarrowBandPointSetFilter< TInputImage, TOutputMesh >, itk::ChangeInformationImageFilter< TInputImage >, itk::CropImageFilter< TInputImage, TOutputImage >, itk::DeformationFieldSource< TOutputImage >, itk::ExpandImageFilter< TInputImage, TOutputImage >, itk::ExtractImageFilter< TInputImage, TOutputImage >, itk::ExtractOrthogonalSwath2DImageFilter< TImage >, itk::FlipImageFilter< TImage >, itk::GaussianImageSource< TOutputImage >, itk::GradientImageToBloxBoundaryPointImageFilter< TInputImage >, itk::HoughTransform2DLinesImageFilter< TInputPixelType, TOutputPixelType >, itk::ImageToMeshFilter< TInputImage, TOutputMesh >, itk::ImageToParametricSpaceFilter< TInputImage, TOutputMesh >, itk::ImageToVectorImageFilter< TInputImage >, itk::ImportImageFilter< TPixel, VImageDimension >, itk::InterpolateImagePointsFilter< TInputImage, TOutputImage, TCoordType, InterpolatorType >, itk::InverseDeformationFieldImageFilter< TInputImage, TOutputImage >, itk::JoinSeriesImageFilter< TInputImage, TOutputImage >, itk::OrientImageFilter< TInputImage, TOutputImage >, itk::PadImageFilter< TInputImage, TOutputImage >, itk::ParametricSpaceToImageSpaceMeshFilter< TInputMesh, TOutputMesh >, itk::PathToImageFilter< TInputPath, TOutputImage >, itk::PermuteAxesImageFilter< TImage >, itk::PointSetToImageFilter< TInputPointSet, TOutputImage >, itk::ProjectionImageFilter< TInputImage, TOutputImage, TAccumulator >, itk::RandomImageSource< TOutputImage >, itk::RegionOfInterestImageFilter< TInputImage, TOutputImage >, itk::ResampleImageFilter< TInputImage, TOutputImage, TInterpolatorPrecisionType >, itk::ShrinkImageFilter< TInputImage, TOutputImage >, itk::SpatialObjectToImageFilter< TInputSpatialObject, TOutputImage >, itk::SpatialObjectToPointSetFilter< TInputSpatialObject, TOutputPointSet >, itk::TileImageFilter< TInputImage, TOutputImage >, itk::TriangleMeshToBinaryImageFilter< TInputMesh, TOutputImage >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, TFunction >, itk::VectorExpandImageFilter< TInputImage, TOutputImage >, itk::VectorResampleImageFilter< TInputImage, TOutputImage, TInterpolatorPrecisionType >, itk::VTKImageImport< TOutputImage >, itk::WarpImageFilter< TInputImage, TOutputImage, TDeformationField >, itk::WarpVectorImageFilter< TInputImage, TOutputImage, TDeformationField >, itk::ImageFileReader< TOutputImage, ConvertPixelTraits >, itk::ImageSeriesReader< TOutputImage >, itk::HistogramToImageFilter< THistogram, TFunction >, itk::Statistics::ImageToListGenerator< TImage, TMaskImage >, itk::AutoCropLabelMapFilter< TInputImage >, itk::ChangeRegionLabelMapFilter< TInputImage >, itk::CropLabelMapFilter< TInputImage >, itk::DirectFourierReconstructionImageToImageFilter< TInputPixelType, TOutputPixelType >, itk::FFTComplexToComplexImageFilter< TPixel, NDimension >, itk::GaborImageSource< TOutputImage >, itk::GridImageSource< TOutputImage >, itk::ResampleImageFilter< TInputImage, TOutputImage, TInterpolatorPrecisionType >, itk::PadLabelMapFilter< TInputImage >, itk::RegionFromReferenceLabelMapFilter< TInputImage >, itk::TransformToDeformationFieldSource< TOutputImage, TTransformPrecisionType >, itk::HistogramToImageFilter< THistogram, TFunction >, itk::Statistics::ImageToListSampleFilter< TImage, TMaskImage >, itk::ProjectionImageFilter< TInputImage, TOutputImage, Function::BinaryThresholdAccumulator< TInputImage::PixelType, TOutputImage::PixelType > >, itk::ProjectionImageFilter< TInputImage, TOutputImage, Function::MeanAccumulator< TInputImage::PixelType, TAccumulate > >, itk::ProjectionImageFilter< TInputImage, TOutputImage, Function::MinimumAccumulator< TInputImage::PixelType > >, itk::ProjectionImageFilter< TInputImage, TOutputImage, Function::MaximumAccumulator< TInputImage::PixelType > >, itk::ProjectionImageFilter< TInputImage, TOutputImage, Function::BinaryAccumulator< TInputImage::PixelType, TOutputImage::PixelType > >, itk::ProjectionImageFilter< TInputImage, TOutputImage, Function::SumAccumulator< TInputImage::PixelType, TOutputImage::PixelType > >, itk::ProjectionImageFilter< TInputImage, TOutputImage, Function::StandardDeviationAccumulator< TInputImage::PixelType, TAccumulate > >, itk::ProjectionImageFilter< TInputImage, TOutputImage, Function::MedianAccumulator< TInputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Functor::Atan< TInputImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Functor::Cos< TInputImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Functor::Acos< TInputImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Functor::InvertIntensityTransform< TInputImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Functor::ChangeLabel< TInputImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< FeatureImageType, ImageType, Functor::Cast< FeatureImageType::PixelType, ImageType::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Functor::SubtractConstantFrom< TInputImage::PixelType, TConstant, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Functor::MultiplyByConstant< TInputImage::PixelType, TConstant, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TLabelImage, TOutputImage, Functor::LabelToRGBFunctor< TLabelImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Function::Log< TInputImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Function::Abs< TInputImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Function::Exp< TInputImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Function::ComplexToReal< TInputImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Functor::Cast< TInputImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Functor::BoundedReciprocal< TInputImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Function::Sigmoid< TInputImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Functor::VectorCast< TInputImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Functor::VectorMagnitudeLinearTransform< TInputImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Functor::IntensityLinearTransform< TInputImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Function::ComplexToModulus< TInputImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Functor::IntensityWindowingTransform< TInputImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Functor::NOT< TInputImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Function::Tan< TInputImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Function::ExpNegative< TInputImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Functor::DivideByConstant< TInputImage::PixelType, TConstant, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Function::ComplexToPhase< TInputImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Functor::ThresholdLabeler< TInputImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Functor::SymmetricEigenAnalysisFunction< TInputImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Function::Sin< TInputImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Function::RGBToLuminance< TInputImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Functor::TensorRelativeAnisotropyFunction< TInputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Functor::MatrixIndexSelection< TInputImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Function::Sqrt< TInputImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Functor::BinaryThreshold< TInputImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Function::Log10< TInputImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Functor::AccessorFunctor< TInputImage::PixelType, TAccessor > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Functor::ModulusTransform< TInputImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Functor::TensorFractionalAnisotropyFunction< TInputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Functor::Asin< TInputImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Functor::EdgePotential< TInputImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Function::Square< TInputImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Functor::VectorIndexSelectionCast< TInputImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Functor::GradientMagnitude< TInputImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Function::ComplexToImaginary< TInputImage::PixelType, TOutputImage::PixelType > >, itk::UnaryFunctorImageFilter< TInputImage, TOutputImage, Functor::AddConstantTo< TInputImage::PixelType, TConstant, TOutputImage::PixelType > >, itk::HistogramToImageFilter< THistogram, NDimension, Function::HistogramLogProbabilityFunction< unsigned long, TOutputPixel > >, itk::HistogramToImageFilter< THistogram, NDimension, Function::HistogramLogProbabilityFunction< unsigned long, TOutputPixel > >, itk::HistogramToImageFilter< THistogram, NDimensions, Function::HistogramProbabilityFunction< unsigned long, TOutputPixel > >, itk::HistogramToImageFilter< THistogram, NDimensions, Function::HistogramProbabilityFunction< unsigned long, TOutputPixel > >, itk::HistogramToImageFilter< THistogram, Function::HistogramIntensityFunction< unsigned long, TOutputPixel > >, itk::HistogramToImageFilter< THistogram, Function::HistogramIntensityFunction< unsigned long, TOutputPixel > >, itk::HistogramToImageFilter< THistogram, Function::HistogramEntropyFunction< unsigned long, TOutputPixel > >, itk::HistogramToImageFilter< THistogram, Function::HistogramEntropyFunction< unsigned long, TOutputPixel > >, itk::HistogramToImageFilter< THistogram, NDimension, Function::HistogramEntropyFunction< unsigned long, TOutputPixel > >, itk::HistogramToImageFilter< THistogram, NDimension, Function::HistogramEntropyFunction< unsigned long, TOutputPixel > >, itk::HistogramToImageFilter< THistogram, NDimension, Function::HistogramIntensityFunction< unsigned long, TOutputPixel > >, itk::HistogramToImageFilter< THistogram, NDimension, Function::HistogramIntensityFunction< unsigned long, TOutputPixel > >, itk::HistogramToImageFilter< THistogram, Function::HistogramProbabilityFunction< unsigned long, TOutputPixel > >, itk::HistogramToImageFilter< THistogram, Function::HistogramProbabilityFunction< unsigned long, TOutputPixel > >, itk::HistogramToImageFilter< THistogram, Function::HistogramLogProbabilityFunction< unsigned long, TOutputPixel > >, and itk::HistogramToImageFilter< THistogram, Function::HistogramLogProbabilityFunction< unsigned long, TOutputPixel > >.
virtual void itk::ProcessObject::GenerateOutputRequestedRegion | ( | DataObject * | output | ) | [protected, virtual, inherited] |
Given one output whose requested region has been set, how should the requested regions for the remaining outputs of the process object be set? By default, all the outputs are set to the same requested region. If a filter needs to produce different requested regions for each output, for instance an image processing filter producing several outputs at different resolutions, then that filter may override this method and set the requested regions appropriatedly.
Note that a filter producing multiple outputs of different types is required to override this method. The default implementation can only correctly handle multiple outputs of the same type.
Reimplemented in itk::MultiResolutionPyramidImageFilter< TInputImage, TOutputImage >, itk::RecursiveMultiResolutionPyramidImageFilter< TInputImage, TOutputImage >, itk::watershed::BoundaryResolver< TPixelType, TDimension >, itk::watershed::EquivalenceRelabeler< TScalarType, TImageDimension >, itk::watershed::Relabeler< TScalarType, TImageDimension >, itk::watershed::Segmenter< TInputImage >, itk::watershed::SegmentTreeGenerator< TScalarType >, itk::watershed::Relabeler< ScalarType, itkGetStaticConstMacro(ImageDimension)>, itk::watershed::Segmenter< InputImageType >, and itk::watershed::SegmentTreeGenerator< ScalarType >.
virtual const bool& itk::ProcessObject::GetAbortGenerateData | ( | ) | [virtual, inherited] |
Get the AbortGenerateData flag for the process object. Process objects may handle premature termination of execution in different ways.
Command* itk::Object::GetCommand | ( | unsigned long | tag | ) | [inherited] |
Get the command associated with the given tag. NOTE: This returns a pointer to a Command, but it is safe to asign this to a Command::Pointer. Since Command inherits from LightObject, at this point in the code, only a pointer or a reference to the Command can be used.
virtual const InputRealType& itk::ContourExtractor2DImageFilter< TInputImage >::GetContourValue | ( | ) | [virtual] |
Set/Get the image intensity value that the contours should follow. This is the equivalent of an iso-value in Marching Squares.
bool itk::Object::GetDebug | ( | ) | const [inherited] |
Get the value of the debug flag.
static bool itk::Object::GetGlobalWarningDisplay | ( | ) | [static, inherited] |
This is a global flag that controls whether any debug, warning or error messages are displayed.
const InputImageType* itk::ImageToPathFilter< TInputImage, PolyLineParametricPath< 2 > >::GetInput | ( | void | ) | [inherited] |
Set/Get the image input of this process object.
const InputImageType* itk::ImageToPathFilter< TInputImage, PolyLineParametricPath< 2 > >::GetInput | ( | unsigned int | idx | ) | [inherited] |
Set/Get the image input of this process object.
Reimplemented from itk::ProcessObject.
const DataObject* itk::ProcessObject::GetInput | ( | unsigned int | idx | ) | const [protected, inherited] |
Method used internally for getting an input.
Reimplemented in itk::MeshToMeshFilter< TInputMesh, TOutputMesh >, and itk::MeshToMeshFilter< TInput, TOutput >.
DataObjectPointerArray& itk::ProcessObject::GetInputs | ( | ) | [inline, inherited] |
Return an array with all the inputs of this process object. This is useful for tracing back in the pipeline to construct graphs etc.
Definition at line 108 of file itkProcessObject.h.
const MetaDataDictionary& itk::Object::GetMetaDataDictionary | ( | void | ) | const [inherited] |
MetaDataDictionary& itk::Object::GetMetaDataDictionary | ( | void | ) | [inherited] |
virtual unsigned long itk::Object::GetMTime | ( | ) | const [virtual, inherited] |
Return this objects modified time.
Reimplemented in itk::ImageRegistrationMethod< TFixedImage, TMovingImage >, itk::ImageToSpatialObjectRegistrationMethod< TFixedImage, TMovingSpatialObject >, itk::MultiResolutionImageRegistrationMethod< TFixedImage, TMovingImage >, itk::PointSetToImageRegistrationMethod< TFixedPointSet, TMovingImage >, itk::PointSetToPointSetRegistrationMethod< TFixedPointSet, TMovingPointSet >, itk::DeformationFieldSource< TOutputImage >, itk::InverseDeformationFieldImageFilter< TInputImage, TOutputImage >, itk::ResampleImageFilter< TInputImage, TOutputImage, TInterpolatorPrecisionType >, itk::VectorResampleImageFilter< TInputImage, TOutputImage, TInterpolatorPrecisionType >, itk::BoundingBox< TPointIdentifier, VPointDimension, TCoordRep, TPointsContainer >, itk::ImageAdaptor< TImage, TAccessor >, itk::ResampleImageFilter< TInputImage, TOutputImage, TInterpolatorPrecisionType >, itk::TransformToDeformationFieldSource< TOutputImage, TTransformPrecisionType >, itk::ImageSpatialObject< TDimension, TPixelType >, itk::MeshSpatialObject< TMesh >, itk::SceneSpatialObject< TSpaceDimension >, itk::SpatialObject< TDimension >, itk::ImageAdaptor< TImage, Accessor::AsinPixelAccessor< TImage::PixelType, TOutputPixelType > >, itk::ImageAdaptor< TImage, Accessor::SqrtPixelAccessor< TImage::PixelType, TOutputPixelType > >, itk::ImageAdaptor< TImage, Accessor::TanPixelAccessor< TImage::PixelType, TOutputPixelType > >, itk::ImageAdaptor< TImage, Accessor::CosPixelAccessor< TImage::PixelType, TOutputPixelType > >, itk::ImageAdaptor< TImage, Accessor::VectorToRGBPixelAccessor< TImage::PixelType::ValueType > >, itk::ImageAdaptor< TImage, Accessor::RGBToVectorPixelAccessor< TImage::PixelType::ComponentType > >, itk::ImageAdaptor< TImage, Accessor::ComplexToModulusPixelAccessor< TImage::PixelType, TOutputPixelType > >, itk::ImageAdaptor< TImage, Accessor::AbsPixelAccessor< TImage::PixelType, TOutputPixelType > >, itk::ImageAdaptor< TImage, Accessor::SinPixelAccessor< TImage::PixelType, TOutputPixelType > >, itk::ImageAdaptor< TImage, Accessor::LogPixelAccessor< TImage::PixelType, TOutputPixelType > >, itk::ImageAdaptor< TImage, Accessor::ComplexToPhasePixelAccessor< TImage::PixelType, TOutputPixelType > >, itk::ImageAdaptor< VectorImage< TPixelType, Dimension >, Accessor::VectorImageToImagePixelAccessor< TPixelType > >, itk::ImageAdaptor< TImage, Accessor::Log10PixelAccessor< TImage::PixelType, TOutputPixelType > >, itk::ImageAdaptor< TImage, Accessor::AtanPixelAccessor< TImage::PixelType, TOutputPixelType > >, itk::ImageAdaptor< TImage, Accessor::ComplexToRealPixelAccessor< TImage::PixelType, TOutputPixelType > >, itk::ImageAdaptor< TImage, Accessor::ComplexToImaginaryPixelAccessor< TImage::PixelType, TOutputPixelType > >, itk::ImageAdaptor< TImage, Accessor::ExpNegativePixelAccessor< TImage::PixelType, TOutputPixelType > >, itk::ImageAdaptor< TImage, Accessor::ExpPixelAccessor< TImage::PixelType, TOutputPixelType > >, itk::ImageAdaptor< TImage, Accessor::AcosPixelAccessor< TImage::PixelType, TOutputPixelType > >, itk::ImageAdaptor< TImage, Accessor::RGBToLuminancePixelAccessor< TImage::PixelType, TOutputPixelType > >, itk::ImageAdaptor< TImage, Accessor::AddPixelAccessor< TImage::PixelType > >, itk::ImageSpatialObject< TDimension, unsigned char >, itk::SpatialObject< 3 >, and itk::SpatialObject< ::itk::GetMeshDimension< TMesh >::PointDimension >.
Referenced by itk::SpatialObject< ::itk::GetMeshDimension< TMesh >::PointDimension >::GetObjectMTime().
MultiThreader* itk::ProcessObject::GetMultiThreader | ( | ) | [inline, inherited] |
Return the multithreader used by this class.
Definition at line 284 of file itkProcessObject.h.
virtual const char* itk::ContourExtractor2DImageFilter< TInputImage >::GetNameOfClass | ( | ) | const [virtual] |
Run-time type information (and related methods).
Reimplemented from itk::ImageToPathFilter< TInputImage, PolyLineParametricPath< 2 > >.
DataObjectPointerArraySizeType itk::ProcessObject::GetNumberOfInputs | ( | ) | const [inline, inherited] |
Get the size of the input vector. This is merely the size of the input vector, not the number of inputs that have valid DataObject's assigned. Use GetNumberOfValidRequiredInputs() to determine how many inputs are non-null.
Definition at line 118 of file itkProcessObject.h.
DataObjectPointerArraySizeType itk::ProcessObject::GetNumberOfOutputs | ( | ) | const [inline, inherited] |
Return an array with all the outputs of this process object. This is useful for tracing forward in the pipeline to contruct graphs etc.
Definition at line 135 of file itkProcessObject.h.
virtual const unsigned int& itk::ProcessObject::GetNumberOfRequiredInputs | ( | ) | [protected, virtual, inherited] |
Protected methods for setting inputs. Subclasses make use of them for setting input.
virtual const unsigned int& itk::ProcessObject::GetNumberOfRequiredOutputs | ( | ) | [protected, virtual, inherited] |
Protected methods for setting outputs. Subclasses make use of them for getting output.
virtual const int& itk::ProcessObject::GetNumberOfThreads | ( | ) | [virtual, inherited] |
Get/Set the number of threads to create when executing.
Referenced by itk::BSplineScatteredDataPointSetToImageFilter< TInputPointSet, TOutputImage >::SplitRequestedRegion().
virtual DataObjectPointerArraySizeType itk::ProcessObject::GetNumberOfValidRequiredInputs | ( | ) | const [virtual, inherited] |
Get the number of valid inputs. This is the number of non-null entries in the input vector in the first NumberOfRequiredInputs slots. This method is used to determine whether the necessary required inputs have been set. Subclasses of ProcessObject may override this implementation if the required inputs are not the first slots in input vector.
Reimplemented in itk::MultiResolutionPDEDeformableRegistration< TFixedImage, TMovingImage, TDeformationField, TRealType >, and itk::PDEDeformableRegistrationFilter< TFixedImage, TMovingImage, TDeformationField >.
OutputPathType* itk::PathSource< PolyLineParametricPath< 2 > >::GetOutput | ( | void | ) | [inherited] |
Get the output data of this process object. The output of this function is not valid until an appropriate Update() method has been called, either explicitly or implicitly. Both the filter itself and the data object have Update() methods, and both methods update the data. Here are three ways to use GetOutput() and make sure the data is valid. In these examples, image is a pointer to some Image object, and the particular ProcessObjects involved are filters. The same examples apply to non-image (e.g. Mesh) data as well.
anotherFilter->SetInput( someFilter->GetOutput() ); anotherFilter->Update();
In this situation, someFilter and anotherFilter are said to constitute a pipeline.
image = someFilter->GetOutput(); image->Update();
someFilter->Update(); image = someFilter->GetOutput();
(In the above example, the two lines of code can be in either order.)
Note that Update() is not called automatically except within a pipeline as in the first example. When streaming (using a StreamingImageFilter) is activated, it may be more efficient to use a pipeline than to call Update() once for each filter in turn.
For an image, the data generated is for the requested Region, which can be set using ImageBase::SetRequestedRegion(). By default, the largest possible region is requested.
OutputPathType* itk::PathSource< PolyLineParametricPath< 2 > >::GetOutput | ( | unsigned int | idx | ) | [inherited] |
Get the output data of this process object. The output of this function is not valid until an appropriate Update() method has been called, either explicitly or implicitly. Both the filter itself and the data object have Update() methods, and both methods update the data. Here are three ways to use GetOutput() and make sure the data is valid. In these examples, image is a pointer to some Image object, and the particular ProcessObjects involved are filters. The same examples apply to non-image (e.g. Mesh) data as well.
anotherFilter->SetInput( someFilter->GetOutput() ); anotherFilter->Update();
In this situation, someFilter and anotherFilter are said to constitute a pipeline.
image = someFilter->GetOutput(); image->Update();
someFilter->Update(); image = someFilter->GetOutput();
(In the above example, the two lines of code can be in either order.)
Note that Update() is not called automatically except within a pipeline as in the first example. When streaming (using a StreamingImageFilter) is activated, it may be more efficient to use a pipeline than to call Update() once for each filter in turn.
For an image, the data generated is for the requested Region, which can be set using ImageBase::SetRequestedRegion(). By default, the largest possible region is requested.
Reimplemented from itk::ProcessObject.
const DataObject* itk::ProcessObject::GetOutput | ( | unsigned int | idx | ) | const [protected, inherited] |
Method used internally for getting an output.
DataObjectPointerArray& itk::ProcessObject::GetOutputs | ( | ) | [inline, inherited] |
Return an array with all the outputs of this process object. This is useful for tracing forward in the pipeline to contruct graphs etc.
Definition at line 133 of file itkProcessObject.h.
virtual const float& itk::ProcessObject::GetProgress | ( | ) | [virtual, inherited] |
Get the execution progress of a process object. The progress is a floating number in [0,1] with 0 meaning no progress and 1 meaning the filter has completed execution.
Referenced by itk::XMLFilterWatcher::ShowProgress().
virtual int itk::LightObject::GetReferenceCount | ( | ) | const [inline, virtual, inherited] |
Gets the reference count on this object.
Definition at line 106 of file itkLightObject.h.
virtual const bool& itk::ProcessObject::GetReleaseDataBeforeUpdateFlag | ( | ) | [virtual, inherited] |
Turn on/off the flags to control whether the bulk data belonging to the outputs of this ProcessObject are released/reallocated during an Update(). In limited memory scenarios, a user may want to force the elements of a pipeline to release any bulk data that is going to be regenerated anyway during an Update() in order to control peak memory allocation. Note that this flag is different from the ReleaseDataFlag. ReleaseDataFlag manages the deallocation of a ProcessObject's bulk output data once that data has been consumed by a downstream ProcessObject. The ReleaseDataBeforeUpdateFlag manages the deallocation/reallocation of bulk data during a pipeline update to control peak memory utilization. Default value is on.
virtual bool itk::ProcessObject::GetReleaseDataFlag | ( | ) | const [virtual, inherited] |
Turn on/off the flags to control whether the bulk data belonging to the outputs of this ProcessObject are released after being used by a downstream ProcessObject. Default value is off. Another options for controlling memory utilization is the ReleaseDataBeforeUpdateFlag.
virtual const InputRegionType& itk::ContourExtractor2DImageFilter< TInputImage >::GetRequestedRegion | ( | ) | [virtual] |
Control whether the largest possible input region is used, or if a custom requested region is to be used.
virtual const bool& itk::ContourExtractor2DImageFilter< TInputImage >::GetReverseContourOrientation | ( | ) | [virtual] |
Control the orientation of the contours with reference to the image gradient. (See class documentation.)
virtual const bool& itk::ContourExtractor2DImageFilter< TInputImage >::GetVertexConnectHighPixels | ( | ) | [virtual] |
Control whether high- or low-valued pixels are vertex-connected. Default is for low-valued pixels to be vertex-connected. (See class documentation.)
static void itk::Object::GlobalWarningDisplayOff | ( | ) | [inline, static, inherited] |
This is a global flag that controls whether any debug, warning or error messages are displayed.
Definition at line 100 of file itkObject.h.
References itk::Object::SetGlobalWarningDisplay().
static void itk::Object::GlobalWarningDisplayOn | ( | ) | [inline, static, inherited] |
This is a global flag that controls whether any debug, warning or error messages are displayed.
Definition at line 98 of file itkObject.h.
References itk::Object::SetGlobalWarningDisplay().
virtual void itk::PathSource< PolyLineParametricPath< 2 > >::GraftNthOutput | ( | unsigned int | idx, | |
OutputPathType * | output | |||
) | [virtual, inherited] |
Graft the specified data object onto this ProcessObject's idx'th output. This is the similar to GraftOutput method except is allows you specify which output is affected. The specified index must be a valid output number (less than ProcessObject::GetNumberOfOutputs()). See the GraftOutput for general usage information.
virtual void itk::PathSource< PolyLineParametricPath< 2 > >::GraftOutput | ( | OutputPathType * | output | ) | [virtual, inherited] |
Graft the specified DataObject onto this ProcessObject's output. This method grabs a handle to the specified DataObject's path data to use as its output's own path data. It also copies the region ivars (RequestedRegion, BufferedRegion, LargestPossibleRegion) and meta-data (Spacing, Origin) from the specified data object into this filter's output data object. Most importantly, however, it leaves the Source ivar untouched so the original pipeline routing is intact. This method is used when a process object is implemented using a mini-pipeline which is defined in its GenerateData() method. The usage is:
// setup the mini-pipeline to process the input to this filter firstFilterInMiniPipeline->SetInput( this->GetInput() ); // setup the mini-pipeline to calculate the correct regions // and write to the appropriate bulk data block lastFilterInMiniPipeline->GraftOutput( this->GetOutput() ); // execute the mini-pipeline lastFilterInMiniPipeline->Update(); // graft the mini-pipeline output back onto this filter's output. // this is needed to get the appropriate regions passed back. this->GraftOutput( lastFilterInMiniPipeline->GetOutput() );
For proper pipeline execution, a filter using a mini-pipeline must implement the GeneratseInputRequestedRegion(), GenerateOutputRequestedRegion(), GenerateOutputInformation() and EnlargeOutputRequestedRegion() methods as necessary to reflect how the mini-pipeline will execute (in other words, the outer filter's pipeline mechanism must be consistent with what the mini-pipeline will do).
bool itk::Object::HasObserver | ( | const EventObject & | event | ) | const [inherited] |
Return true if an observer is registered for this event.
void itk::Object::InvokeEvent | ( | const EventObject & | ) | [inherited] |
Call Execute on all the Commands observing this event id.
void itk::Object::InvokeEvent | ( | const EventObject & | ) | const [inherited] |
Call Execute on all the Commands observing this event id. The actions triggered by this call doesn't modify this object.
virtual DataObjectPointer itk::PathSource< PolyLineParametricPath< 2 > >::MakeOutput | ( | unsigned int | idx | ) | [virtual, inherited] |
Make a DataObject of the correct type to used as the specified output. Every ProcessObject subclass must be able to create a DataObject that can be used as a specified output. This method is automatically called when DataObject::DisconnectPipeline() is called. DataObject::DisconnectPipeline, disconnects a data object from being an output of its current source. When the data object is disconnected, the ProcessObject needs to construct a replacement output data object so that the ProcessObject is in a valid state. So DataObject::DisconnectPipeline eventually calls ProcessObject::MakeOutput. Note that MakeOutput always returns a SmartPointer to a DataObject. If a subclass of ImageSource has multiple outputs of different types, then that class must provide an implementation of MakeOutput().
Reimplemented from itk::ProcessObject.
virtual void itk::Object::Modified | ( | ) | const [virtual, inherited] |
Update the modification time for this object. Many filters rely on the modification time to determine if they need to recompute their data.
Reimplemented in itk::NormalizeImageFilter< TInputImage, TOutputImage >, itk::ImageAdaptor< TImage, TAccessor >, itk::MiniPipelineSeparableImageFilter< TInputImage, TOutputImage, TFilter >, itk::GrayscaleDilateImageFilter< TInputImage, TOutputImage, TKernel >, itk::GrayscaleErodeImageFilter< TInputImage, TOutputImage, TKernel >, itk::GrayscaleMorphologicalClosingImageFilter< TInputImage, TOutputImage, TKernel >, itk::GrayscaleMorphologicalOpeningImageFilter< TInputImage, TOutputImage, TKernel >, itk::MorphologicalGradientImageFilter< TInputImage, TOutputImage, TKernel >, itk::ImageAdaptor< TImage, Accessor::AsinPixelAccessor< TImage::PixelType, TOutputPixelType > >, itk::ImageAdaptor< TImage, Accessor::SqrtPixelAccessor< TImage::PixelType, TOutputPixelType > >, itk::ImageAdaptor< TImage, Accessor::TanPixelAccessor< TImage::PixelType, TOutputPixelType > >, itk::ImageAdaptor< TImage, Accessor::CosPixelAccessor< TImage::PixelType, TOutputPixelType > >, itk::ImageAdaptor< TImage, Accessor::VectorToRGBPixelAccessor< TImage::PixelType::ValueType > >, itk::ImageAdaptor< TImage, Accessor::RGBToVectorPixelAccessor< TImage::PixelType::ComponentType > >, itk::ImageAdaptor< TImage, Accessor::ComplexToModulusPixelAccessor< TImage::PixelType, TOutputPixelType > >, itk::ImageAdaptor< TImage, Accessor::AbsPixelAccessor< TImage::PixelType, TOutputPixelType > >, itk::ImageAdaptor< TImage, Accessor::SinPixelAccessor< TImage::PixelType, TOutputPixelType > >, itk::ImageAdaptor< TImage, Accessor::LogPixelAccessor< TImage::PixelType, TOutputPixelType > >, itk::ImageAdaptor< TImage, Accessor::ComplexToPhasePixelAccessor< TImage::PixelType, TOutputPixelType > >, itk::ImageAdaptor< VectorImage< TPixelType, Dimension >, Accessor::VectorImageToImagePixelAccessor< TPixelType > >, itk::ImageAdaptor< TImage, Accessor::Log10PixelAccessor< TImage::PixelType, TOutputPixelType > >, itk::ImageAdaptor< TImage, Accessor::AtanPixelAccessor< TImage::PixelType, TOutputPixelType > >, itk::ImageAdaptor< TImage, Accessor::ComplexToRealPixelAccessor< TImage::PixelType, TOutputPixelType > >, itk::ImageAdaptor< TImage, Accessor::ComplexToImaginaryPixelAccessor< TImage::PixelType, TOutputPixelType > >, itk::ImageAdaptor< TImage, Accessor::ExpNegativePixelAccessor< TImage::PixelType, TOutputPixelType > >, itk::ImageAdaptor< TImage, Accessor::ExpPixelAccessor< TImage::PixelType, TOutputPixelType > >, itk::ImageAdaptor< TImage, Accessor::AcosPixelAccessor< TImage::PixelType, TOutputPixelType > >, itk::ImageAdaptor< TImage, Accessor::RGBToLuminancePixelAccessor< TImage::PixelType, TOutputPixelType > >, itk::ImageAdaptor< TImage, Accessor::AddPixelAccessor< TImage::PixelType > >, and itk::MiniPipelineSeparableImageFilter< TInputImage, TOutputImage, RankImageFilter< TInputImage, TInputImage, FlatStructuringElement< ::itk::GetImageDimension< TInputImage >::ImageDimension > > >.
Referenced by itk::NarrowBandImageFilterBase< TInputImage, Image< TOutputPixelType,::itk::GetImageDimension< TInputImage >::ImageDimension > >::InsertNarrowBandNode(), itk::MatrixOffsetTransformBase< TScalarType, 3, 3 >::SetCenter(), itk::MatrixOffsetTransformBase< TScalarType, 3, 3 >::SetMatrix(), itk::NarrowBandImageFilterBase< TInputImage, Image< TOutputPixelType,::itk::GetImageDimension< TInputImage >::ImageDimension > >::SetNarrowBand(), itk::NarrowBandImageFilterBase< TInputImage, Image< TOutputPixelType,::itk::GetImageDimension< TInputImage >::ImageDimension > >::SetNarrowBandInnerRadius(), itk::NarrowBandImageFilterBase< TInputImage, Image< TOutputPixelType,::itk::GetImageDimension< TInputImage >::ImageDimension > >::SetNarrowBandTotalRadius(), itk::MatrixOffsetTransformBase< TScalarType, 3, 3 >::SetOffset(), itk::ThresholdLabelerImageFilter< TInputImage, TOutputImage >::SetRealThresholds(), itk::ThresholdLabelerImageFilter< TInputImage, TOutputImage >::SetThresholds(), itk::Statistics::GoodnessOfFitFunctionBase< TInputHistogram >::SetTotalObservedScale(), and itk::MatrixOffsetTransformBase< TScalarType, 3, 3 >::SetTranslation().
static Pointer itk::ContourExtractor2DImageFilter< TInputImage >::New | ( | ) | [static] |
Method for creation through the object factory.
Reimplemented from itk::PathSource< PolyLineParametricPath< 2 > >.
virtual void itk::ProcessObject::PopBackInput | ( | ) | [protected, virtual, inherited] |
Push/Pop an input of this process object. These methods allow a filter to model its input vector as a queue or stack. These routines may not be appropriate for all filters, especially filters with different types of inputs. These routines follow the semantics of STL.
Reimplemented in itk::ImageToImageFilter< TInputImage, TOutputImage >, itk::ImageToImageFilter< TSpeedImage, TLevelSet >, itk::ImageToImageFilter< TDeformationField, TDeformationField >, itk::ImageToImageFilter< TLabelImage, TOutputImage >, itk::ImageToImageFilter< TInputImage1, Functor::MakeJoin< TInputImage1, TInputImage2 >::ImageType >, itk::ImageToImageFilter< TInputImage, TInputImage >, itk::ImageToImageFilter< TInputImage, TSparseOutputImage >, itk::ImageToImageFilter< Image< TReferenceImagePixelType, 3 >, Image< DiffusionTensor3D< TTensorPixelType >, 3 > >, itk::ImageToImageFilter< TInputImage, Image< CovariantVector< TDataType,::itk::GetImageDimension< TInputImage >::ImageDimension >,::itk::GetImageDimension< TInputImage >::ImageDimension > >, itk::ImageToImageFilter< TInputImage, BloxBoundaryPointImage< ::itk::GetImageDimension< TInputImage >::ImageDimension > >, itk::ImageToImageFilter< Image< SymmetricSecondRankTensor< double, 3 >, 3 >, Image< TPixel, 3 > >, itk::ImageToImageFilter< TInputImage, TLabelImage >, itk::ImageToImageFilter< Image< TInputPixel1, NDimension >, Image< std::complex< TOutputPixel >, NDimension > >, itk::ImageToImageFilter< Image< TInputPixelType, 3 >, Image< TOutputPixelType, 3 > >, itk::ImageToImageFilter< TInputImage, Image< unsigned long,::itk::GetImageDimension< TInputImage >::ImageDimension > >, itk::ImageToImageFilter< TSourceImage, BloxBoundaryProfileImage< ::itk::GetImageDimension< TSourceImage >::ImageDimension > >, itk::ImageToImageFilter< TInputImage1, TOutputImage >, itk::ImageToImageFilter< FeatureImageType, ImageType >, itk::ImageToImageFilter< TImageType, TImageType >, itk::ImageToImageFilter< BloxBoundaryPointImage< dim >, BloxCoreAtomImage< dim > >, itk::ImageToImageFilter< Image< std::complex< TPixel >, VDimension >, Image< TPixel, VDimension > >, itk::ImageToImageFilter< TInputImage, VectorImage< TProbabilityPrecisionType,::itk::GetImageDimension< TInputImage >::ImageDimension > >, itk::ImageToImageFilter< TLabelImage, TIntensityImage >, itk::ImageToImageFilter< TInputImage, Image< CovariantVector< TOutputValueType,::itk::GetImageDimension< TInputImage >::ImageDimension >,::itk::GetImageDimension< TInputImage >::ImageDimension > >, itk::ImageToImageFilter< TInputImage, TClassifiedImage >, itk::ImageToImageFilter< TInputImage, TEigenValueImage >, itk::ImageToImageFilter< TInputVectorImage, Image< TLabelsType,::itk::GetImageDimension< TInputVectorImage >::ImageDimension > >, itk::ImageToImageFilter< TInputImage1, TInputImage1 >, itk::ImageToImageFilter< TFeatureImage, TOutputImage >, itk::ImageToImageFilter< ImageType, ImageType >, itk::ImageToImageFilter< Image< TPixel, VDimension >, Image< std::complex< TPixel >, VDimension > >, itk::ImageToImageFilter< TInputImage, Image< TOutputPixelType,::itk::GetImageDimension< TInputImage >::ImageDimension > >, itk::ImageToImageFilter< Image< std::complex< TPixel >, NDimension >, Image< std::complex< TPixel >, NDimension > >, itk::ImageToImageFilter< TLevelSet, TLevelSet >, itk::ImageToImageFilter< TMovingImage, TFixedImage >, itk::ImageToImageFilter< TImage, TImage >, itk::ImageToImageFilter< TInputImageType, TSparseOutputImageType >, itk::ImageToImageFilter< Image< TInputPixelType, 2 >, Image< TOutputPixelType, 2 > >, itk::ImageToImageFilter< TInputImage, VectorImage< TInputImage::InternalPixelType,::itk::GetImageDimension< TInputImage >::ImageDimension > >, itk::ImageToImageFilter< TDeformationField, TOutputImage >, itk::ImageToImageFilter< TImage, TImage >, and itk::ImageToImageFilter< ImageType, ImageType >.
virtual void itk::ProcessObject::PopFrontInput | ( | ) | [protected, virtual, inherited] |
Push/Pop an input of this process object. These methods allow a filter to model its input vector as a queue or stack. These routines may not be appropriate for all filters, especially filters with different types of inputs. These routines follow the semantics of STL.
Reimplemented in itk::ImageToImageFilter< TInputImage, TOutputImage >, itk::ImageToImageFilter< TSpeedImage, TLevelSet >, itk::ImageToImageFilter< TDeformationField, TDeformationField >, itk::ImageToImageFilter< TLabelImage, TOutputImage >, itk::ImageToImageFilter< TInputImage1, Functor::MakeJoin< TInputImage1, TInputImage2 >::ImageType >, itk::ImageToImageFilter< TInputImage, TInputImage >, itk::ImageToImageFilter< TInputImage, TSparseOutputImage >, itk::ImageToImageFilter< Image< TReferenceImagePixelType, 3 >, Image< DiffusionTensor3D< TTensorPixelType >, 3 > >, itk::ImageToImageFilter< TInputImage, Image< CovariantVector< TDataType,::itk::GetImageDimension< TInputImage >::ImageDimension >,::itk::GetImageDimension< TInputImage >::ImageDimension > >, itk::ImageToImageFilter< TInputImage, BloxBoundaryPointImage< ::itk::GetImageDimension< TInputImage >::ImageDimension > >, itk::ImageToImageFilter< Image< SymmetricSecondRankTensor< double, 3 >, 3 >, Image< TPixel, 3 > >, itk::ImageToImageFilter< TInputImage, TLabelImage >, itk::ImageToImageFilter< Image< TInputPixel1, NDimension >, Image< std::complex< TOutputPixel >, NDimension > >, itk::ImageToImageFilter< Image< TInputPixelType, 3 >, Image< TOutputPixelType, 3 > >, itk::ImageToImageFilter< TInputImage, Image< unsigned long,::itk::GetImageDimension< TInputImage >::ImageDimension > >, itk::ImageToImageFilter< TSourceImage, BloxBoundaryProfileImage< ::itk::GetImageDimension< TSourceImage >::ImageDimension > >, itk::ImageToImageFilter< TInputImage1, TOutputImage >, itk::ImageToImageFilter< FeatureImageType, ImageType >, itk::ImageToImageFilter< TImageType, TImageType >, itk::ImageToImageFilter< BloxBoundaryPointImage< dim >, BloxCoreAtomImage< dim > >, itk::ImageToImageFilter< Image< std::complex< TPixel >, VDimension >, Image< TPixel, VDimension > >, itk::ImageToImageFilter< TInputImage, VectorImage< TProbabilityPrecisionType,::itk::GetImageDimension< TInputImage >::ImageDimension > >, itk::ImageToImageFilter< TLabelImage, TIntensityImage >, itk::ImageToImageFilter< TInputImage, Image< CovariantVector< TOutputValueType,::itk::GetImageDimension< TInputImage >::ImageDimension >,::itk::GetImageDimension< TInputImage >::ImageDimension > >, itk::ImageToImageFilter< TInputImage, TClassifiedImage >, itk::ImageToImageFilter< TInputImage, TEigenValueImage >, itk::ImageToImageFilter< TInputVectorImage, Image< TLabelsType,::itk::GetImageDimension< TInputVectorImage >::ImageDimension > >, itk::ImageToImageFilter< TInputImage1, TInputImage1 >, itk::ImageToImageFilter< TFeatureImage, TOutputImage >, itk::ImageToImageFilter< ImageType, ImageType >, itk::ImageToImageFilter< Image< TPixel, VDimension >, Image< std::complex< TPixel >, VDimension > >, itk::ImageToImageFilter< TInputImage, Image< TOutputPixelType,::itk::GetImageDimension< TInputImage >::ImageDimension > >, itk::ImageToImageFilter< Image< std::complex< TPixel >, NDimension >, Image< std::complex< TPixel >, NDimension > >, itk::ImageToImageFilter< TLevelSet, TLevelSet >, itk::ImageToImageFilter< TMovingImage, TFixedImage >, itk::ImageToImageFilter< TImage, TImage >, itk::ImageToImageFilter< TInputImageType, TSparseOutputImageType >, itk::ImageToImageFilter< Image< TInputPixelType, 2 >, Image< TOutputPixelType, 2 > >, itk::ImageToImageFilter< TInputImage, VectorImage< TInputImage::InternalPixelType,::itk::GetImageDimension< TInputImage >::ImageDimension > >, itk::ImageToImageFilter< TDeformationField, TOutputImage >, itk::ImageToImageFilter< TImage, TImage >, and itk::ImageToImageFilter< ImageType, ImageType >.
virtual void itk::ProcessObject::PrepareOutputs | ( | ) | [virtual, inherited] |
An opportunity to deallocate a ProcessObject's bulk data storage. Some filters may wish to reuse existing bulk data storage to avoid unnecessary deallocation/allocation sequences. The default implementation calls Initialize() on each output. DataObject::Initialize() frees its bulk data by default.
Reimplemented in itk::WatershedImageFilter< TInputImage >.
void itk::LightObject::Print | ( | std::ostream & | os, | |
Indent | indent = 0 | |||
) | const [inherited] |
Cause the object to print itself out.
Referenced by itk::WeakPointer< ProcessObject >::Print().
virtual void itk::LightObject::PrintHeader | ( | std::ostream & | os, | |
Indent | indent | |||
) | const [protected, virtual, inherited] |
bool itk::Object::PrintObservers | ( | std::ostream & | os, | |
Indent | indent | |||
) | const [protected, inherited] |
void itk::ContourExtractor2DImageFilter< TInputImage >::PrintSelf | ( | std::ostream & | os, | |
Indent | indent | |||
) | const [protected, virtual] |
Methods invoked by Print() to print information about the object including superclasses. Typically not called by the user (use Print() instead) but used in the hierarchical print process to combine the output of several classes.
Reimplemented from itk::ImageToPathFilter< TInputImage, PolyLineParametricPath< 2 > >.
virtual void itk::LightObject::PrintTrailer | ( | std::ostream & | os, | |
Indent | indent | |||
) | const [protected, virtual, inherited] |
virtual void itk::ProcessObject::PropagateRequestedRegion | ( | DataObject * | output | ) | [virtual, inherited] |
Send the requested region information back up the pipeline (to the filters that preceed this one).
Reimplemented in itk::StreamingImageFilter< TInputImage, TOutputImage >, and itk::VTKImageImport< TOutputImage >.
virtual void itk::ProcessObject::PropagateResetPipeline | ( | ) | [protected, virtual, inherited] |
Called to allocate the input array. Copies old inputs. Propagate a call to ResetPipeline() up the pipeline. Called only from DataObject.
virtual void itk::ProcessObject::PushBackInput | ( | const DataObject * | input | ) | [protected, virtual, inherited] |
Push/Pop an input of this process object. These methods allow a filter to model its input vector as a queue or stack. These routines may not be appropriate for all filters, especially filters with different types of inputs. These routines follow the semantics of STL.
Reimplemented in itk::ImageToImageFilter< TInputImage, TOutputImage >, itk::ImageToImageFilter< TSpeedImage, TLevelSet >, itk::ImageToImageFilter< TDeformationField, TDeformationField >, itk::ImageToImageFilter< TLabelImage, TOutputImage >, itk::ImageToImageFilter< TInputImage1, Functor::MakeJoin< TInputImage1, TInputImage2 >::ImageType >, itk::ImageToImageFilter< TInputImage, TInputImage >, itk::ImageToImageFilter< TInputImage, TSparseOutputImage >, itk::ImageToImageFilter< Image< TReferenceImagePixelType, 3 >, Image< DiffusionTensor3D< TTensorPixelType >, 3 > >, itk::ImageToImageFilter< TInputImage, Image< CovariantVector< TDataType,::itk::GetImageDimension< TInputImage >::ImageDimension >,::itk::GetImageDimension< TInputImage >::ImageDimension > >, itk::ImageToImageFilter< TInputImage, BloxBoundaryPointImage< ::itk::GetImageDimension< TInputImage >::ImageDimension > >, itk::ImageToImageFilter< Image< SymmetricSecondRankTensor< double, 3 >, 3 >, Image< TPixel, 3 > >, itk::ImageToImageFilter< TInputImage, TLabelImage >, itk::ImageToImageFilter< Image< TInputPixel1, NDimension >, Image< std::complex< TOutputPixel >, NDimension > >, itk::ImageToImageFilter< Image< TInputPixelType, 3 >, Image< TOutputPixelType, 3 > >, itk::ImageToImageFilter< TInputImage, Image< unsigned long,::itk::GetImageDimension< TInputImage >::ImageDimension > >, itk::ImageToImageFilter< TSourceImage, BloxBoundaryProfileImage< ::itk::GetImageDimension< TSourceImage >::ImageDimension > >, itk::ImageToImageFilter< TInputImage1, TOutputImage >, itk::ImageToImageFilter< FeatureImageType, ImageType >, itk::ImageToImageFilter< TImageType, TImageType >, itk::ImageToImageFilter< BloxBoundaryPointImage< dim >, BloxCoreAtomImage< dim > >, itk::ImageToImageFilter< Image< std::complex< TPixel >, VDimension >, Image< TPixel, VDimension > >, itk::ImageToImageFilter< TInputImage, VectorImage< TProbabilityPrecisionType,::itk::GetImageDimension< TInputImage >::ImageDimension > >, itk::ImageToImageFilter< TLabelImage, TIntensityImage >, itk::ImageToImageFilter< TInputImage, Image< CovariantVector< TOutputValueType,::itk::GetImageDimension< TInputImage >::ImageDimension >,::itk::GetImageDimension< TInputImage >::ImageDimension > >, itk::ImageToImageFilter< TInputImage, TClassifiedImage >, itk::ImageToImageFilter< TInputImage, TEigenValueImage >, itk::ImageToImageFilter< TInputVectorImage, Image< TLabelsType,::itk::GetImageDimension< TInputVectorImage >::ImageDimension > >, itk::ImageToImageFilter< TInputImage1, TInputImage1 >, itk::ImageToImageFilter< TFeatureImage, TOutputImage >, itk::ImageToImageFilter< ImageType, ImageType >, itk::ImageToImageFilter< Image< TPixel, VDimension >, Image< std::complex< TPixel >, VDimension > >, itk::ImageToImageFilter< TInputImage, Image< TOutputPixelType,::itk::GetImageDimension< TInputImage >::ImageDimension > >, itk::ImageToImageFilter< Image< std::complex< TPixel >, NDimension >, Image< std::complex< TPixel >, NDimension > >, itk::ImageToImageFilter< TLevelSet, TLevelSet >, itk::ImageToImageFilter< TMovingImage, TFixedImage >, itk::ImageToImageFilter< TImage, TImage >, itk::ImageToImageFilter< TInputImageType, TSparseOutputImageType >, itk::ImageToImageFilter< Image< TInputPixelType, 2 >, Image< TOutputPixelType, 2 > >, itk::ImageToImageFilter< TInputImage, VectorImage< TInputImage::InternalPixelType,::itk::GetImageDimension< TInputImage >::ImageDimension > >, itk::ImageToImageFilter< TDeformationField, TOutputImage >, itk::ImageToImageFilter< TImage, TImage >, and itk::ImageToImageFilter< ImageType, ImageType >.
virtual void itk::ProcessObject::PushFrontInput | ( | const DataObject * | input | ) | [protected, virtual, inherited] |
Push/Pop an input of this process object. These methods allow a filter to model its input vector as a queue or stack. These routines may not be appropriate for all filters, especially filters with different types of inputs. These routines follow the semantics of STL.
Reimplemented in itk::ImageToImageFilter< TInputImage, TOutputImage >, itk::ImageToImageFilter< TSpeedImage, TLevelSet >, itk::ImageToImageFilter< TDeformationField, TDeformationField >, itk::ImageToImageFilter< TLabelImage, TOutputImage >, itk::ImageToImageFilter< TInputImage1, Functor::MakeJoin< TInputImage1, TInputImage2 >::ImageType >, itk::ImageToImageFilter< TInputImage, TInputImage >, itk::ImageToImageFilter< TInputImage, TSparseOutputImage >, itk::ImageToImageFilter< Image< TReferenceImagePixelType, 3 >, Image< DiffusionTensor3D< TTensorPixelType >, 3 > >, itk::ImageToImageFilter< TInputImage, Image< CovariantVector< TDataType,::itk::GetImageDimension< TInputImage >::ImageDimension >,::itk::GetImageDimension< TInputImage >::ImageDimension > >, itk::ImageToImageFilter< TInputImage, BloxBoundaryPointImage< ::itk::GetImageDimension< TInputImage >::ImageDimension > >, itk::ImageToImageFilter< Image< SymmetricSecondRankTensor< double, 3 >, 3 >, Image< TPixel, 3 > >, itk::ImageToImageFilter< TInputImage, TLabelImage >, itk::ImageToImageFilter< Image< TInputPixel1, NDimension >, Image< std::complex< TOutputPixel >, NDimension > >, itk::ImageToImageFilter< Image< TInputPixelType, 3 >, Image< TOutputPixelType, 3 > >, itk::ImageToImageFilter< TInputImage, Image< unsigned long,::itk::GetImageDimension< TInputImage >::ImageDimension > >, itk::ImageToImageFilter< TSourceImage, BloxBoundaryProfileImage< ::itk::GetImageDimension< TSourceImage >::ImageDimension > >, itk::ImageToImageFilter< TInputImage1, TOutputImage >, itk::ImageToImageFilter< FeatureImageType, ImageType >, itk::ImageToImageFilter< TImageType, TImageType >, itk::ImageToImageFilter< BloxBoundaryPointImage< dim >, BloxCoreAtomImage< dim > >, itk::ImageToImageFilter< Image< std::complex< TPixel >, VDimension >, Image< TPixel, VDimension > >, itk::ImageToImageFilter< TInputImage, VectorImage< TProbabilityPrecisionType,::itk::GetImageDimension< TInputImage >::ImageDimension > >, itk::ImageToImageFilter< TLabelImage, TIntensityImage >, itk::ImageToImageFilter< TInputImage, Image< CovariantVector< TOutputValueType,::itk::GetImageDimension< TInputImage >::ImageDimension >,::itk::GetImageDimension< TInputImage >::ImageDimension > >, itk::ImageToImageFilter< TInputImage, TClassifiedImage >, itk::ImageToImageFilter< TInputImage, TEigenValueImage >, itk::ImageToImageFilter< TInputVectorImage, Image< TLabelsType,::itk::GetImageDimension< TInputVectorImage >::ImageDimension > >, itk::ImageToImageFilter< TInputImage1, TInputImage1 >, itk::ImageToImageFilter< TFeatureImage, TOutputImage >, itk::ImageToImageFilter< ImageType, ImageType >, itk::ImageToImageFilter< Image< TPixel, VDimension >, Image< std::complex< TPixel >, VDimension > >, itk::ImageToImageFilter< TInputImage, Image< TOutputPixelType,::itk::GetImageDimension< TInputImage >::ImageDimension > >, itk::ImageToImageFilter< Image< std::complex< TPixel >, NDimension >, Image< std::complex< TPixel >, NDimension > >, itk::ImageToImageFilter< TLevelSet, TLevelSet >, itk::ImageToImageFilter< TMovingImage, TFixedImage >, itk::ImageToImageFilter< TImage, TImage >, itk::ImageToImageFilter< TInputImageType, TSparseOutputImageType >, itk::ImageToImageFilter< Image< TInputPixelType, 2 >, Image< TOutputPixelType, 2 > >, itk::ImageToImageFilter< TInputImage, VectorImage< TInputImage::InternalPixelType,::itk::GetImageDimension< TInputImage >::ImageDimension > >, itk::ImageToImageFilter< TDeformationField, TOutputImage >, itk::ImageToImageFilter< TImage, TImage >, and itk::ImageToImageFilter< ImageType, ImageType >.
virtual void itk::Object::Register | ( | ) | const [virtual, inherited] |
Increase the reference count (mark as used by another object).
Reimplemented from itk::LightObject.
virtual void itk::ProcessObject::ReleaseDataBeforeUpdateFlagOff | ( | ) | [virtual, inherited] |
Turn on/off the flags to control whether the bulk data belonging to the outputs of this ProcessObject are released/reallocated during an Update(). In limited memory scenarios, a user may want to force the elements of a pipeline to release any bulk data that is going to be regenerated anyway during an Update() in order to control peak memory allocation. Note that this flag is different from the ReleaseDataFlag. ReleaseDataFlag manages the deallocation of a ProcessObject's bulk output data once that data has been consumed by a downstream ProcessObject. The ReleaseDataBeforeUpdateFlag manages the deallocation/reallocation of bulk data during a pipeline update to control peak memory utilization. Default value is on.
virtual void itk::ProcessObject::ReleaseDataBeforeUpdateFlagOn | ( | ) | [virtual, inherited] |
Turn on/off the flags to control whether the bulk data belonging to the outputs of this ProcessObject are released/reallocated during an Update(). In limited memory scenarios, a user may want to force the elements of a pipeline to release any bulk data that is going to be regenerated anyway during an Update() in order to control peak memory allocation. Note that this flag is different from the ReleaseDataFlag. ReleaseDataFlag manages the deallocation of a ProcessObject's bulk output data once that data has been consumed by a downstream ProcessObject. The ReleaseDataBeforeUpdateFlag manages the deallocation/reallocation of bulk data during a pipeline update to control peak memory utilization. Default value is on.
void itk::ProcessObject::ReleaseDataFlagOff | ( | ) | [inline, inherited] |
Turn on/off the flags to control whether the bulk data belonging to the outputs of this ProcessObject are released after being used by a downstream ProcessObject. Default value is off. Another options for controlling memory utilization is the ReleaseDataBeforeUpdateFlag.
Definition at line 257 of file itkProcessObject.h.
void itk::ProcessObject::ReleaseDataFlagOn | ( | ) | [inline, inherited] |
Turn on/off the flags to control whether the bulk data belonging to the outputs of this ProcessObject are released after being used by a downstream ProcessObject. Default value is off. Another options for controlling memory utilization is the ReleaseDataBeforeUpdateFlag.
Definition at line 256 of file itkProcessObject.h.
virtual void itk::ProcessObject::ReleaseInputs | ( | ) | [protected, virtual, inherited] |
A filter may need to release its input's bulk data after it has finished calculating a new output. The filter may need to release the inputs because the user has turned on the ReleaseDataFlag or it may need to release the inputs because the filter is an "in place" filter and it has overwritten its input with its output data. The implementation here simply checks the ReleaseDataFlag of the inputs. InPlaceImageFilter overrides this method so release the input it has overwritten.
Reimplemented in itk::InPlaceImageFilter< TInputImage, TOutputImage >, itk::InPlaceLabelMapFilter< TInputImage >, itk::InPlaceImageFilter< TInputImage, TOutputImage >, itk::InPlaceImageFilter< TDeformationField, TDeformationField >, itk::InPlaceImageFilter< TInputImage1, Functor::MakeJoin< TInputImage1, TInputImage2 >::ImageType >, itk::InPlaceImageFilter< TInputImage >, itk::InPlaceImageFilter< TInputImage, TSparseOutputImage >, itk::InPlaceImageFilter< TInputImage1, TOutputImage >, itk::InPlaceImageFilter< Image< TInputPixel1, NDimension >, Image< std::complex< TOutputPixel >, NDimension > >, itk::InPlaceImageFilter< TFeatureImage, TOutputImage >, itk::InPlaceImageFilter< TInputImage, Image< TOutputPixelType,::itk::GetImageDimension< TInputImage >::ImageDimension > >, itk::InPlaceImageFilter< TLabelImage, TOutputImage >, itk::InPlaceImageFilter< FeatureImageType, ImageType >, itk::InPlaceImageFilter< TInputImageType, TSparseOutputImageType >, itk::InPlaceImageFilter< TImage, TImage >, and itk::InPlaceLabelMapFilter< TImage >.
void itk::Object::RemoveAllObservers | ( | ) | [inherited] |
Remove all observers .
virtual void itk::ProcessObject::RemoveInput | ( | DataObject * | input | ) | [protected, virtual, inherited] |
Protected methods for setting inputs. Subclasses make use of them for setting input.
void itk::Object::RemoveObserver | ( | unsigned long | tag | ) | [inherited] |
Remove the observer with this tag value.
virtual void itk::ProcessObject::RemoveOutput | ( | DataObject * | output | ) | [protected, virtual, inherited] |
Protected methods for setting outputs. Subclasses make use of them for getting output.
virtual void itk::ProcessObject::ResetPipeline | ( | ) | [virtual, inherited] |
virtual void itk::ProcessObject::RestoreInputReleaseDataFlags | ( | ) | [protected, virtual, inherited] |
Restore the cached input ReleaseDataFlags.
virtual void itk::ContourExtractor2DImageFilter< TInputImage >::ReverseContourOrientationOff | ( | ) | [virtual] |
Control the orientation of the contours with reference to the image gradient. (See class documentation.)
virtual void itk::ContourExtractor2DImageFilter< TInputImage >::ReverseContourOrientationOn | ( | ) | [virtual] |
Control the orientation of the contours with reference to the image gradient. (See class documentation.)
virtual void itk::ProcessObject::SetAbortGenerateData | ( | bool | _arg | ) | [virtual, inherited] |
Set the AbortGenerateData flag for the process object. Process objects may handle premature termination of execution in different ways.
virtual void itk::ContourExtractor2DImageFilter< TInputImage >::SetContourValue | ( | InputRealType | _arg | ) | [virtual] |
Set/Get the image intensity value that the contours should follow. This is the equivalent of an iso-value in Marching Squares.
void itk::Object::SetDebug | ( | bool | debugFlag | ) | const [inherited] |
Set the value of the debug flag. A non-zero value turns debugging on.
static void itk::Object::SetGlobalWarningDisplay | ( | bool | flag | ) | [static, inherited] |
This is a global flag that controls whether any debug, warning or error messages are displayed.
Referenced by itk::Object::GlobalWarningDisplayOff(), and itk::Object::GlobalWarningDisplayOn().
virtual void itk::ImageToPathFilter< TInputImage, PolyLineParametricPath< 2 > >::SetInput | ( | unsigned | int, | |
const TInputImage * | image | |||
) | [virtual, inherited] |
Set/Get the image input of this process object.
virtual void itk::ImageToPathFilter< TInputImage, PolyLineParametricPath< 2 > >::SetInput | ( | const InputImageType * | image | ) | [virtual, inherited] |
Set/Get the image input of this process object.
void itk::Object::SetMetaDataDictionary | ( | const MetaDataDictionary & | rhs | ) | [inherited] |
virtual void itk::ProcessObject::SetNthInput | ( | unsigned int | num, | |
DataObject * | input | |||
) | [protected, virtual, inherited] |
Protected methods for setting inputs. Subclasses make use of them for setting input.
Reimplemented in itk::ImageToVectorImageFilter< TInputImage >.
Referenced by itk::watershed::BoundaryResolver< TPixelType, TDimension >::SetBoundaryA(), itk::watershed::BoundaryResolver< TPixelType, TDimension >::SetBoundaryB(), itk::watershed::EquivalenceRelabeler< TScalarType, TImageDimension >::SetEquivalencyTable(), itk::SegmentationLevelSetImageFilter< TInputImage, TFeatureImage, TOutputPixelType >::SetFeatureImage(), itk::NarrowBandLevelSetImageFilter< TInputImage, TFeatureImage, TOutputPixelType, Image< TOutputPixelType,::itk::GetImageDimension< TInputImage >::ImageDimension > >::SetFeatureImage(), itk::WatershedImageFilter< TInputImage >::SetInput(), itk::watershed::SegmentTreeGenerator< ScalarType >::SetInputEquivalencyTable(), itk::watershed::Segmenter< InputImageType >::SetInputImage(), itk::watershed::Relabeler< ScalarType, itkGetStaticConstMacro(ImageDimension)>::SetInputImage(), itk::watershed::EquivalenceRelabeler< TScalarType, TImageDimension >::SetInputImage(), itk::watershed::SegmentTreeGenerator< ScalarType >::SetInputSegmentTable(), itk::watershed::Relabeler< ScalarType, itkGetStaticConstMacro(ImageDimension)>::SetInputSegmentTree(), itk::DiffusionTensor3DReconstructionImageFilter< TReferenceImagePixelType, TGradientImagePixelType, TTensorPixelType >::SetReferenceImage(), and itk::ChangeInformationImageFilter< TInputImage >::SetReferenceImage().
virtual void itk::ProcessObject::SetNthOutput | ( | unsigned int | num, | |
DataObject * | output | |||
) | [protected, virtual, inherited] |
Protected methods for setting outputs. Subclasses make use of them for getting output.
Referenced by itk::watershed::BoundaryResolver< TPixelType, TDimension >::BoundaryResolver(), itk::watershed::EquivalenceRelabeler< TScalarType, TImageDimension >::EquivalenceRelabeler(), itk::watershed::Segmenter< InputImageType >::SetBoundary(), itk::watershed::BoundaryResolver< TPixelType, TDimension >::SetEquivalencyTable(), itk::watershed::Segmenter< InputImageType >::SetOutputImage(), itk::watershed::Relabeler< ScalarType, itkGetStaticConstMacro(ImageDimension)>::SetOutputImage(), itk::watershed::EquivalenceRelabeler< TScalarType, TImageDimension >::SetOutputImage(), and itk::watershed::Segmenter< InputImageType >::SetSegmentTable().
void itk::ProcessObject::SetNumberOfInputs | ( | unsigned int | num | ) | [protected, inherited] |
Called to allocate the input array. Copies old inputs.
void itk::ProcessObject::SetNumberOfOutputs | ( | unsigned int | num | ) | [protected, inherited] |
Called to allocate the output array. Copies old outputs.
virtual void itk::ProcessObject::SetNumberOfRequiredInputs | ( | unsigned int | _arg | ) | [protected, virtual, inherited] |
Protected methods for setting inputs. Subclasses make use of them for setting input.
virtual void itk::ProcessObject::SetNumberOfRequiredOutputs | ( | unsigned int | _arg | ) | [protected, virtual, inherited] |
Protected methods for setting outputs. Subclasses make use of them for getting output.
virtual void itk::ProcessObject::SetNumberOfThreads | ( | int | _arg | ) | [virtual, inherited] |
Get/Set the number of threads to create when executing.
Reimplemented in itk::GradientMagnitudeRecursiveGaussianImageFilter< TInputImage, TOutputImage >, itk::NonThreadedShrinkImageFilter< TInputImage, TOutputImage >, itk::SmoothingRecursiveGaussianImageFilter< TInputImage, TOutputImage >, itk::MiniPipelineSeparableImageFilter< TInputImage, TOutputImage, TFilter >, itk::GrayscaleDilateImageFilter< TInputImage, TOutputImage, TKernel >, itk::GrayscaleErodeImageFilter< TInputImage, TOutputImage, TKernel >, and itk::MiniPipelineSeparableImageFilter< TInputImage, TOutputImage, RankImageFilter< TInputImage, TInputImage, FlatStructuringElement< ::itk::GetImageDimension< TInputImage >::ImageDimension > > >.
virtual void itk::ProcessObject::SetProgress | ( | float | _arg | ) | [virtual, inherited] |
Set the execution progress of a process object. The progress is a floating number in [0,1] with 0 meaning no progress and 1 meaning the filter has completed execution. The ProgressEvent is NOT invoked.
virtual void itk::Object::SetReferenceCount | ( | int | ) | [virtual, inherited] |
Sets the reference count (use with care)
Reimplemented from itk::LightObject.
virtual void itk::ProcessObject::SetReleaseDataBeforeUpdateFlag | ( | bool | _arg | ) | [virtual, inherited] |
Turn on/off the flags to control whether the bulk data belonging to the outputs of this ProcessObject are released/reallocated during an Update(). In limited memory scenarios, a user may want to force the elements of a pipeline to release any bulk data that is going to be regenerated anyway during an Update() in order to control peak memory allocation. Note that this flag is different from the ReleaseDataFlag. ReleaseDataFlag manages the deallocation of a ProcessObject's bulk output data once that data has been consumed by a downstream ProcessObject. The ReleaseDataBeforeUpdateFlag manages the deallocation/reallocation of bulk data during a pipeline update to control peak memory utilization. Default value is on.
virtual void itk::ProcessObject::SetReleaseDataFlag | ( | bool | flag | ) | [virtual, inherited] |
Turn on/off the flags to control whether the bulk data belonging to the outputs of this ProcessObject are released after being used by a downstream ProcessObject. Default value is off. Another options for controlling memory utilization is the ReleaseDataBeforeUpdateFlag.
void itk::ContourExtractor2DImageFilter< TInputImage >::SetRequestedRegion | ( | const InputRegionType | region | ) |
Control whether the largest possible input region is used, or if a custom requested region is to be used.
virtual void itk::ContourExtractor2DImageFilter< TInputImage >::SetReverseContourOrientation | ( | bool | _arg | ) | [virtual] |
Control the orientation of the contours with reference to the image gradient. (See class documentation.)
virtual void itk::ContourExtractor2DImageFilter< TInputImage >::SetVertexConnectHighPixels | ( | bool | _arg | ) | [virtual] |
Control whether high- or low-valued pixels are vertex-connected. Default is for low-valued pixels to be vertex-connected. (See class documentation.)
virtual void itk::Object::UnRegister | ( | ) | const [virtual, inherited] |
Decrease the reference count (release by another object).
Reimplemented from itk::LightObject.
virtual void itk::ProcessObject::Update | ( | ) | [virtual, inherited] |
Bring this filter up-to-date. Update() checks modified times against last execution times, and re-executes objects if necessary. A side effect of this method is that the whole pipeline may execute in order to bring this filter up-to-date. This method updates the currently prescribed requested region. If no requested region has been set on the output, then the requested region will be set to the largest possible region. Once the requested region is set, Update() will make sure the specified requested region is up-to-date. This is a confusing side effect to users who are just calling Update() on a filter. A first call to Update() will cause the largest possible region to be updated. A second call to Update() will update that same region. If a modification to the upstream pipeline cause a filter to have a different largest possible region, this second call to Update() will not cause the output requested region to be reset to the new largest possible region. Instead, the output requested region will be the same as the last time Update() was called. To have a filter always to produce its largest possible region, users should call UpdateLargestPossibleRegion() instead.
Reimplemented in itk::CoreAtomImageToUnaryCorrespondenceMatrixProcess< TSourceImage >, itk::MedialNodePairCorrespondenceProcess< TSourceImage >, itk::MedialNodeTripletCorrespondenceProcess< TSourceImage >, itk::CoreAtomImageToDistanceMatrixProcess< TSourceImage >, itk::ImageFileWriter< TInputImage >, and itk::ImageSeriesWriter< TInputImage, TOutputImage >.
virtual void itk::ProcessObject::UpdateLargestPossibleRegion | ( | ) | [virtual, inherited] |
Like Update(), but sets the output requested region to the largest possible region for the output. This is the method users should call if they want the entire dataset to be processed. If a user wants to update the same output region as a previous call to Update() or a previous call to UpdateLargestPossibleRegion(), then they should call the method Update().
virtual void itk::ProcessObject::UpdateOutputData | ( | DataObject * | output | ) | [virtual, inherited] |
Actually generate new output
Reimplemented in itk::StreamingImageFilter< TInputImage, TOutputImage >.
virtual void itk::ProcessObject::UpdateOutputInformation | ( | ) | [virtual, inherited] |
Update the information decribing the output data. This method transverses up the pipeline gathering modified time information. On the way back down the pipeline, this method calls GenerateOutputInformation() to set any necessary information about the output data objects. For instance, a filter that shrinks an image will need to provide an implementation for GenerateOutputInformation() that changes the spacing of the pixels. Such filters should call their superclass' implementation of GenerateOutputInformation prior to changing the information values they need (i.e. GenerateOutputInformation() should call Superclass::GenerateOutputInformation() prior to changing the information.
Reimplemented in itk::watershed::Segmenter< TInputImage >, itk::VTKImageImport< TOutputImage >, and itk::watershed::Segmenter< InputImageType >.
void itk::ProcessObject::UpdateProgress | ( | float | amount | ) | [inherited] |
Update the progress of the process object.
Sets the Progress ivar to amount and invokes any observers for the ProgressEvent. The parameter amount should be in [0,1] and is the cumulative (not incremental) progress.
virtual void itk::ContourExtractor2DImageFilter< TInputImage >::VertexConnectHighPixelsOff | ( | ) | [virtual] |
Control whether high- or low-valued pixels are vertex-connected. Default is for low-valued pixels to be vertex-connected. (See class documentation.)
virtual void itk::ContourExtractor2DImageFilter< TInputImage >::VertexConnectHighPixelsOn | ( | ) | [virtual] |
Control whether high- or low-valued pixels are vertex-connected. Default is for low-valued pixels to be vertex-connected. (See class documentation.)
const unsigned int itk::ContourExtractor2DImageFilter< TInputImage >::InputImageDimension = TInputImage::ImageDimension [static] |
Extract dimension from input and output image.
Reimplemented from itk::ImageToPathFilter< TInputImage, PolyLineParametricPath< 2 > >.
Definition at line 98 of file itkContourExtractor2DImageFilter.h.
TimeStamp itk::ProcessObject::m_OutputInformationMTime [protected, inherited] |
Time when GenerateOutputInformation was last called.
Definition at line 431 of file itkProcessObject.h.
InternalReferenceCountType itk::LightObject::m_ReferenceCount [mutable, protected, inherited] |
Number of uses of this object by other objects.
Definition at line 144 of file itkLightObject.h.
SimpleFastMutexLock itk::LightObject::m_ReferenceCountLock [mutable, protected, inherited] |
Mutex lock to protect modification to the reference count
Definition at line 147 of file itkLightObject.h.
bool itk::ProcessObject::m_Updating [protected, inherited] |
These ivars are made protected so filters like itkStreamingImageFilter can access them directly. This flag indicates when the pipeline is executing. It prevents infinite recursion when pipelines have loops.
Definition at line 428 of file itkProcessObject.h.