Filter that optimizes a 2D path relative to an image. More...

#include <itkOrthogonalSwath2DPathFilter.h>

Inheritance diagram for itk::OrthogonalSwath2DPathFilter< TFourierSeriesPath, TSwathMeritImage >:

Collaboration diagram for itk::OrthogonalSwath2DPathFilter< TFourierSeriesPath, TSwathMeritImage >:

Public Types
typedef SmartPointer< const Self >	ConstPointer
typedef DataObject::Pointer	DataObjectPointer
typedef std::vector < DataObjectPointer >	DataObjectPointerArray
typedef DataObjectPointerArray::size_type	DataObjectPointerArraySizeType
typedef ImageType::ConstPointer	ImageConstPointer
typedef TSwathMeritImage	ImageType
typedef InputPathType::IndexType	IndexType
typedef InputImageType::PixelType	InputImagePixelType
typedef InputImageType::ConstPointer	InputImagePointer
typedef InputImageType::RegionType	InputImageRegionType
typedef TSwathMeritImage	InputImageType
typedef InputPathType::ConstPointer	InputPathConstPointer
typedef InputPathType::IndexType	InputPathIndexType
typedef InputPathType::InputType	InputPathInputType
typedef InputPathType::OffsetType	InputPathOffsetType
typedef InputPathType::OutputType	InputPathOutputType
typedef InputPathType::Pointer	InputPathPointer
typedef TFourierSeriesPath	InputPathType
typedef InputPathType::OffsetType	OffsetType
typedef OutputPathType::OrthogonalCorrectionTablePointer	OrthogonalCorrectionTablePointer
typedef OutputPathType::OrthogonalCorrectionTableType	OrthogonalCorrectionTableType
typedef OutputPathType::IndexType	OutputPathIndexType
typedef OutputPathType::InputType	OutputPathInputType
typedef OutputPathType::OffsetType	OutputPathOffsetType
typedef OutputPathType::OutputType	OutputPathOutputType
typedef OutputPathType::Pointer	OutputPathPointer
typedef OrthogonallyCorrected2DParametricPath	OutputPathType
typedef SmartPointer< Self >	Pointer
typedef OrthogonalSwath2DPathFilter	Self
typedef ImageType::SizeType	SizeType
typedef PathAndImageToPathFilter < TFourierSeriesPath, TSwathMeritImage, OrthogonallyCorrected2DParametricPath >	Superclass
Public Member Functions
virtual void	AbortGenerateDataOff ()
virtual void	AbortGenerateDataOn ()
virtual LightObject::Pointer	CreateAnother () const
virtual void	DebugOff () const
virtual void	DebugOn () const
virtual void	Delete ()
virtual void	EnlargeOutputRequestedRegion (DataObject *)
virtual const bool &	GetAbortGenerateData ()
Command *	GetCommand (unsigned long tag)
bool	GetDebug () const
DataObjectPointerArray &	GetInputs ()
MetaDataDictionary &	GetMetaDataDictionary (void)
const MetaDataDictionary &	GetMetaDataDictionary (void) const
virtual unsigned long	GetMTime () const
MultiThreader *	GetMultiThreader ()
virtual const char *	GetNameOfClass () const
DataObjectPointerArraySizeType	GetNumberOfInputs () const
virtual DataObjectPointerArraySizeType	GetNumberOfValidRequiredInputs () const
virtual const float &	GetProgress ()
virtual int	GetReferenceCount () const
virtual void	GraftNthOutput (unsigned int idx, OutputPathType *output)
bool	HasObserver (const EventObject &event) const
void	InvokeEvent (const EventObject &) const
void	InvokeEvent (const EventObject &)
virtual DataObjectPointer	MakeOutput (unsigned int idx)
virtual void	Modified () const
virtual void	PrepareOutputs ()
void	Print (std::ostream &os, Indent indent=0) const
virtual void	PropagateRequestedRegion (DataObject *output)
virtual void	Register () const
void	RemoveAllObservers ()
void	RemoveObserver (unsigned long tag)
virtual void	ResetPipeline ()
virtual void	SetAbortGenerateData (bool _arg)
void	SetDebug (bool debugFlag) const
void	SetMetaDataDictionary (const MetaDataDictionary &rhs)
virtual void	SetProgress (float _arg)
virtual void	SetReferenceCount (int)
virtual void	UnRegister () const
virtual void	Update ()
virtual void	UpdateLargestPossibleRegion ()
virtual void	UpdateOutputData (DataObject *output)
virtual void	UpdateOutputInformation ()
void	UpdateProgress (float amount)


virtual void	SetPathInput (const TFourierSeriesPath *path)
const InputPathType *	GetPathInput (void)


virtual void	SetImageInput (const TSwathMeritImage *image)
const InputImageType *	GetImageInput (void)


virtual void	SetInput (const InputPathType *path)
virtual void	SetInput (unsigned int, const TInputPath *path)
const InputPathType *	GetInput (void)
const InputPathType *	GetInput (unsigned int idx)


OutputPathType *	GetOutput (void)
OutputPathType *	GetOutput (unsigned int idx)


virtual void	GraftOutput (OutputPathType *output)


DataObjectPointerArray &	GetOutputs ()
DataObjectPointerArraySizeType	GetNumberOfOutputs () const


virtual void	SetReleaseDataFlag (bool flag)
virtual bool	GetReleaseDataFlag () const
void	ReleaseDataFlagOn ()
void	ReleaseDataFlagOff ()


virtual void	SetReleaseDataBeforeUpdateFlag (bool _arg)
virtual const bool &	GetReleaseDataBeforeUpdateFlag ()
virtual void	ReleaseDataBeforeUpdateFlagOn ()
virtual void	ReleaseDataBeforeUpdateFlagOff ()


virtual void	SetNumberOfThreads (int _arg)
virtual const int &	GetNumberOfThreads ()


unsigned long	AddObserver (const EventObject &event, Command *)
unsigned long	AddObserver (const EventObject &event, Command *) const
Static Public Member Functions
static void	BreakOnError ()
static Pointer	New ()


static void	SetGlobalWarningDisplay (bool flag)
static bool	GetGlobalWarningDisplay ()
static void	GlobalWarningDisplayOn ()
static void	GlobalWarningDisplayOff ()
Static Public Attributes
static const unsigned int	InputImageDimension
Protected Types


typedef int	InternalReferenceCountType
Protected Member Functions
virtual void	CacheInputReleaseDataFlags ()
void	GenerateData (void)
virtual void	GenerateInputRequestedRegion ()
virtual void	GenerateOutputInformation ()
virtual void	GenerateOutputRequestedRegion (DataObject *output)
	OrthogonalSwath2DPathFilter ()
bool	PrintObservers (std::ostream &os, Indent indent) const
void	PrintSelf (std::ostream &os, Indent indent) const
virtual void	PropagateResetPipeline ()
virtual void	ReleaseInputs ()
virtual void	RestoreInputReleaseDataFlags ()
void	SetNumberOfInputs (unsigned int num)
void	SetNumberOfOutputs (unsigned int num)
virtual	~OrthogonalSwath2DPathFilter ()


const DataObject *	GetInput (unsigned int idx) const


const DataObject *	GetOutput (unsigned int idx) const


virtual void	SetNthInput (unsigned int num, DataObject *input)
virtual void	AddInput (DataObject *input)
virtual void	RemoveInput (DataObject *input)
virtual void	SetNumberOfRequiredInputs (unsigned int _arg)
virtual const unsigned int &	GetNumberOfRequiredInputs ()


virtual void	PushBackInput (const DataObject *input)
virtual void	PopBackInput ()
virtual void	PushFrontInput (const DataObject *input)
virtual void	PopFrontInput ()


virtual void	SetNthOutput (unsigned int num, DataObject *output)
virtual void	AddOutput (DataObject *output)
virtual void	RemoveOutput (DataObject *output)
virtual void	SetNumberOfRequiredOutputs (unsigned int _arg)
virtual const unsigned int &	GetNumberOfRequiredOutputs ()


virtual void	PrintHeader (std::ostream &os, Indent indent) const
virtual void	PrintTrailer (std::ostream &os, Indent indent) const
Protected Attributes
TimeStamp	m_OutputInformationMTime
InternalReferenceCountType	m_ReferenceCount
SimpleFastMutexLock	m_ReferenceCountLock
bool	m_Updating

Detailed Description

template<class TFourierSeriesPath, class TSwathMeritImage>
class itk::OrthogonalSwath2DPathFilter< TFourierSeriesPath, TSwathMeritImage >

Filter that optimizes a 2D path relative to an image.

OrthogonalSwath2DPathFilter produces an OrthogonallyCorrected2DParametricPath representation of a path that is optimal with respect to an image and an original Fourier series path (sometimes referred to as an "initial contour"). Usage is a little complex. The input image must be preprocessed with ExtractOrthogonalSwath2DImageFilter (the user may want to smooth the image first). The user should then use the resulting swath image to produce a new "merit" swath image of the EXACT same size as the swath image produced in the preceeding step. Each pixel value in the merit swath image indicates the local merit of having the path pass through that swath index (taking the absolute value of the vertical partial-derivative of the swath image is often a good way to do this). Both the merit swath image and the path used to extract the swath image should then be passed as inputs to this filter which will search through the merit swath image using dynamic programming to find the absolutely optimum (in terms of the swath image) path. The test file itkOrthogonalSwath2DPathFilterTest.cxx provides a good usage example.

Definition at line 49 of file itkOrthogonalSwath2DPathFilter.h.

Member Typedef Documentation

template<class TFourierSeriesPath , class TSwathMeritImage >

typedef SmartPointer<const Self> itk::OrthogonalSwath2DPathFilter< TFourierSeriesPath, TSwathMeritImage >::ConstPointer

Reimplemented from itk::PathAndImageToPathFilter< TFourierSeriesPath, TSwathMeritImage, OrthogonallyCorrected2DParametricPath >.

Definition at line 59 of file itkOrthogonalSwath2DPathFilter.h.

template<class TOutputPath>

typedef DataObject::Pointer itk::PathSource< TOutputPath >::DataObjectPointer [inherited]

Smart Pointer type to a DataObject.

Reimplemented from itk::ProcessObject.

Definition at line 50 of file itkPathSource.h.

typedef std::vector<DataObjectPointer> itk::ProcessObject::DataObjectPointerArray [inherited]

STL Array of SmartPointers to DataObjects

Definition at line 103 of file itkProcessObject.h.

typedef DataObjectPointerArray::size_type itk::ProcessObject::DataObjectPointerArraySizeType [inherited]

Size type of an std::vector

Definition at line 112 of file itkProcessObject.h.

template<class TFourierSeriesPath , class TSwathMeritImage >

typedef ImageType::ConstPointer itk::OrthogonalSwath2DPathFilter< TFourierSeriesPath, TSwathMeritImage >::ImageConstPointer

Definition at line 73 of file itkOrthogonalSwath2DPathFilter.h.

template<class TFourierSeriesPath , class TSwathMeritImage >

typedef TSwathMeritImage itk::OrthogonalSwath2DPathFilter< TFourierSeriesPath, TSwathMeritImage >::ImageType

Definition at line 72 of file itkOrthogonalSwath2DPathFilter.h.

template<class TFourierSeriesPath , class TSwathMeritImage >

typedef InputPathType::IndexType itk::OrthogonalSwath2DPathFilter< TFourierSeriesPath, TSwathMeritImage >::IndexType

Definition at line 83 of file itkOrthogonalSwath2DPathFilter.h.

typedef InputImageType::PixelType itk::PathAndImageToPathFilter< TFourierSeriesPath , TSwathMeritImage , OrthogonallyCorrected2DParametricPath >::InputImagePixelType [inherited]

Definition at line 64 of file itkPathAndImageToPathFilter.h.

typedef InputImageType::ConstPointer itk::PathAndImageToPathFilter< TFourierSeriesPath , TSwathMeritImage , OrthogonallyCorrected2DParametricPath >::InputImagePointer [inherited]

Definition at line 62 of file itkPathAndImageToPathFilter.h.

typedef InputImageType::RegionType itk::PathAndImageToPathFilter< TFourierSeriesPath , TSwathMeritImage , OrthogonallyCorrected2DParametricPath >::InputImageRegionType [inherited]

Definition at line 63 of file itkPathAndImageToPathFilter.h.

typedef TSwathMeritImage itk::PathAndImageToPathFilter< TFourierSeriesPath , TSwathMeritImage , OrthogonallyCorrected2DParametricPath >::InputImageType [inherited]

Definition at line 61 of file itkPathAndImageToPathFilter.h.

typedef InputPathType::ConstPointer itk::PathAndImageToPathFilter< TFourierSeriesPath , TSwathMeritImage , OrthogonallyCorrected2DParametricPath >::InputPathConstPointer [inherited]

Reimplemented from itk::PathToPathFilter< TInputPath, TOutputPath >.

Definition at line 56 of file itkPathAndImageToPathFilter.h.

typedef InputPathType::IndexType itk::PathAndImageToPathFilter< TFourierSeriesPath , TSwathMeritImage , OrthogonallyCorrected2DParametricPath >::InputPathIndexType [inherited]

Definition at line 59 of file itkPathAndImageToPathFilter.h.

template<class TFourierSeriesPath , class TSwathMeritImage >

typedef InputPathType::InputType itk::OrthogonalSwath2DPathFilter< TFourierSeriesPath, TSwathMeritImage >::InputPathInputType

Reimplemented from itk::PathAndImageToPathFilter< TFourierSeriesPath, TSwathMeritImage, OrthogonallyCorrected2DParametricPath >.

Definition at line 70 of file itkOrthogonalSwath2DPathFilter.h.

typedef InputPathType::OffsetType itk::PathAndImageToPathFilter< TFourierSeriesPath , TSwathMeritImage , OrthogonallyCorrected2DParametricPath >::InputPathOffsetType [inherited]

Definition at line 60 of file itkPathAndImageToPathFilter.h.

typedef InputPathType::OutputType itk::PathAndImageToPathFilter< TFourierSeriesPath , TSwathMeritImage , OrthogonallyCorrected2DParametricPath >::InputPathOutputType [inherited]

Definition at line 58 of file itkPathAndImageToPathFilter.h.

template<class TFourierSeriesPath , class TSwathMeritImage >

typedef InputPathType::Pointer itk::OrthogonalSwath2DPathFilter< TFourierSeriesPath, TSwathMeritImage >::InputPathPointer

Reimplemented from itk::PathAndImageToPathFilter< TFourierSeriesPath, TSwathMeritImage, OrthogonallyCorrected2DParametricPath >.

Definition at line 69 of file itkOrthogonalSwath2DPathFilter.h.

template<class TFourierSeriesPath , class TSwathMeritImage >

typedef TFourierSeriesPath itk::OrthogonalSwath2DPathFilter< TFourierSeriesPath, TSwathMeritImage >::InputPathType

Some convenient typedefs.

Reimplemented from itk::PathAndImageToPathFilter< TFourierSeriesPath, TSwathMeritImage, OrthogonallyCorrected2DParametricPath >.

Definition at line 65 of file itkOrthogonalSwath2DPathFilter.h.

typedef int itk::LightObject::InternalReferenceCountType [protected, inherited]

Define the type of the reference count according to the target. This allows the use of atomic operations

Definition at line 139 of file itkLightObject.h.

template<class TFourierSeriesPath , class TSwathMeritImage >

typedef InputPathType::OffsetType itk::OrthogonalSwath2DPathFilter< TFourierSeriesPath, TSwathMeritImage >::OffsetType

Definition at line 84 of file itkOrthogonalSwath2DPathFilter.h.

template<class TFourierSeriesPath , class TSwathMeritImage >

typedef OutputPathType::OrthogonalCorrectionTablePointer itk::OrthogonalSwath2DPathFilter< TFourierSeriesPath, TSwathMeritImage >::OrthogonalCorrectionTablePointer

Definition at line 81 of file itkOrthogonalSwath2DPathFilter.h.

template<class TFourierSeriesPath , class TSwathMeritImage >

typedef OutputPathType::OrthogonalCorrectionTableType itk::OrthogonalSwath2DPathFilter< TFourierSeriesPath, TSwathMeritImage >::OrthogonalCorrectionTableType

Definition at line 79 of file itkOrthogonalSwath2DPathFilter.h.

typedef OutputPathType::IndexType itk::PathAndImageToPathFilter< TFourierSeriesPath , TSwathMeritImage , OrthogonallyCorrected2DParametricPath >::OutputPathIndexType [inherited]

Reimplemented from itk::PathSource< TOutputPath >.

Definition at line 69 of file itkPathAndImageToPathFilter.h.

template<class TFourierSeriesPath , class TSwathMeritImage >

typedef OutputPathType::InputType itk::OrthogonalSwath2DPathFilter< TFourierSeriesPath, TSwathMeritImage >::OutputPathInputType

Reimplemented from itk::PathAndImageToPathFilter< TFourierSeriesPath, TSwathMeritImage, OrthogonallyCorrected2DParametricPath >.

Definition at line 77 of file itkOrthogonalSwath2DPathFilter.h.

typedef OutputPathType::OffsetType itk::PathAndImageToPathFilter< TFourierSeriesPath , TSwathMeritImage , OrthogonallyCorrected2DParametricPath >::OutputPathOffsetType [inherited]

Reimplemented from itk::PathSource< TOutputPath >.

Definition at line 70 of file itkPathAndImageToPathFilter.h.

typedef OutputPathType::OutputType itk::PathAndImageToPathFilter< TFourierSeriesPath , TSwathMeritImage , OrthogonallyCorrected2DParametricPath >::OutputPathOutputType [inherited]

Reimplemented from itk::PathSource< TOutputPath >.

Definition at line 68 of file itkPathAndImageToPathFilter.h.

template<class TFourierSeriesPath , class TSwathMeritImage >

typedef OutputPathType::Pointer itk::OrthogonalSwath2DPathFilter< TFourierSeriesPath, TSwathMeritImage >::OutputPathPointer

Reimplemented from itk::PathAndImageToPathFilter< TFourierSeriesPath, TSwathMeritImage, OrthogonallyCorrected2DParametricPath >.

Definition at line 76 of file itkOrthogonalSwath2DPathFilter.h.

template<class TFourierSeriesPath , class TSwathMeritImage >

typedef OrthogonallyCorrected2DParametricPath itk::OrthogonalSwath2DPathFilter< TFourierSeriesPath, TSwathMeritImage >::OutputPathType

Some convenient typedefs.

Reimplemented from itk::PathAndImageToPathFilter< TFourierSeriesPath, TSwathMeritImage, OrthogonallyCorrected2DParametricPath >.

Definition at line 75 of file itkOrthogonalSwath2DPathFilter.h.

template<class TFourierSeriesPath , class TSwathMeritImage >

typedef SmartPointer<Self> itk::OrthogonalSwath2DPathFilter< TFourierSeriesPath, TSwathMeritImage >::Pointer

Reimplemented from itk::PathAndImageToPathFilter< TFourierSeriesPath, TSwathMeritImage, OrthogonallyCorrected2DParametricPath >.

Definition at line 58 of file itkOrthogonalSwath2DPathFilter.h.

template<class TFourierSeriesPath , class TSwathMeritImage >

typedef OrthogonalSwath2DPathFilter itk::OrthogonalSwath2DPathFilter< TFourierSeriesPath, TSwathMeritImage >::Self

Standard class typedefs.

Reimplemented from itk::PathAndImageToPathFilter< TFourierSeriesPath, TSwathMeritImage, OrthogonallyCorrected2DParametricPath >.

Definition at line 55 of file itkOrthogonalSwath2DPathFilter.h.

template<class TFourierSeriesPath , class TSwathMeritImage >

typedef ImageType::SizeType itk::OrthogonalSwath2DPathFilter< TFourierSeriesPath, TSwathMeritImage >::SizeType

Definition at line 85 of file itkOrthogonalSwath2DPathFilter.h.

template<class TFourierSeriesPath , class TSwathMeritImage >

typedef PathAndImageToPathFilter< TFourierSeriesPath, TSwathMeritImage, OrthogonallyCorrected2DParametricPath > itk::OrthogonalSwath2DPathFilter< TFourierSeriesPath, TSwathMeritImage >::Superclass

Reimplemented from itk::PathAndImageToPathFilter< TFourierSeriesPath, TSwathMeritImage, OrthogonallyCorrected2DParametricPath >.

Definition at line 57 of file itkOrthogonalSwath2DPathFilter.h.

Constructor & Destructor Documentation

template<class TFourierSeriesPath , class TSwathMeritImage >

itk::OrthogonalSwath2DPathFilter< TFourierSeriesPath, TSwathMeritImage >::OrthogonalSwath2DPathFilter ( ) [protected]

template<class TFourierSeriesPath , class TSwathMeritImage >

virtual itk::OrthogonalSwath2DPathFilter< TFourierSeriesPath, TSwathMeritImage >::~OrthogonalSwath2DPathFilter ( ) [protected, virtual]

Member Function Documentation

virtual void itk::ProcessObject::AbortGenerateDataOff ( ) [virtual, inherited]

virtual void itk::ProcessObject::AbortGenerateDataOn ( ) [virtual, inherited]

Turn on and off the AbortGenerateData flag.

virtual void itk::ProcessObject::AddInput ( DataObject * input ) [protected, virtual, inherited]

Protected methods for setting inputs. Subclasses make use of them for setting input.

unsigned long itk::Object::AddObserver	(	const EventObject &	event,
		Command *
	)			`[inherited]`

Allow people to add/remove/invoke observers (callbacks) to any ITK object. This is an implementation of the subject/observer design pattern. An observer is added by specifying an event to respond to and an itk::Command to execute. It returns an unsigned long tag which can be used later to remove the event or retrieve the command. The memory for the Command becomes the responsibility of this object, so don't pass the same instance of a command to two different objects

unsigned long itk::Object::AddObserver	(	const EventObject &	event,
		Command *
	)			const `[inherited]`

Allow people to add/remove/invoke observers (callbacks) to any ITK object. This is an implementation of the subject/observer design pattern. An observer is added by specifying an event to respond to and an itk::Command to execute. It returns an unsigned long tag which can be used later to remove the event or retrieve the command. The memory for the Command becomes the responsibility of this object, so don't pass the same instance of a command to two different objects

virtual void itk::ProcessObject::AddOutput ( DataObject * output ) [protected, virtual, inherited]

Protected methods for setting outputs. Subclasses make use of them for getting output.

static void itk::LightObject::BreakOnError ( ) [static, inherited]

This method is called when itkExceptionMacro executes. It allows the debugger to break on error.

virtual void itk::ProcessObject::CacheInputReleaseDataFlags ( ) [protected, virtual, inherited]

Cache the state of any ReleaseDataFlag's on the inputs. While the filter is executing, we need to set the ReleaseDataFlag's on the inputs to false in case the current filter is implemented using a mini-pipeline (which will try to release the inputs). After the filter finishes, we restore the state of the ReleaseDataFlag's before the call to ReleaseInputs().

virtual LightObject::Pointer itk::Object::CreateAnother ( ) const [virtual, inherited]

Create an object from an instance, potentially deferring to a factory. This method allows you to create an instance of an object that is exactly the same type as the referring object. This is useful in cases where an object has been cast back to a base class.

Reimplemented from itk::LightObject.

virtual void itk::Object::DebugOff ( ) const [virtual, inherited]

Turn debugging output off.

virtual void itk::Object::DebugOn ( ) const [virtual, inherited]

Turn debugging output on.

virtual void itk::LightObject::Delete ( ) [virtual, inherited]

Delete an itk object. This method should always be used to delete an object when the new operator was used to create it. Using the C delete method will not work with reference counting.

virtual void itk::ProcessObject::EnlargeOutputRequestedRegion ( DataObject * ) [inline, virtual, inherited]

Give the process object a chance to indictate that it will produce more output than it was requested to produce. For example, many imaging filters must compute the entire output at once or can only produce output in complete slices. Such filters cannot handle smaller requested regions. These filters must provide an implementation of this method, setting the output requested region to the size they will produce. By default, a process object does not modify the size of the output requested region.

Definition at line 225 of file itkProcessObject.h.

template<class TFourierSeriesPath , class TSwathMeritImage >

void itk::OrthogonalSwath2DPathFilter< TFourierSeriesPath, TSwathMeritImage >::GenerateData ( void ) [protected, virtual]

This method causes the filter to generate its output.

Reimplemented from itk::ProcessObject.

virtual void itk::PathAndImageToPathFilter< TFourierSeriesPath , TSwathMeritImage , OrthogonallyCorrected2DParametricPath >::GenerateInputRequestedRegion ( void ) [protected, virtual, inherited]

What is the input requested region that is required to produce the output requested region? Up till and including now, the base assumption is that the largest possible region will be requested of the input. If this method is overridden, the new method should call its superclass' implementation as its first step.

See also:: ProcessObject::GenerateInputRequestedRegion()

Reimplemented from itk::PathToPathFilter< TInputPath, TOutputPath >.

virtual void itk::ProcessObject::GenerateOutputInformation ( ) [protected, virtual, inherited]

Generate the information decribing the output data. The default implementation of this method will copy information from the input to the output. A filter may override this method if its output will have different information than its input. For instance, a filter that shrinks an image will need to provide an implementation for this method that changes the spacing of the pixels. Such filters should call their superclass' implementation of this method prior to changing the information values they need (i.e. GenerateOutputInformation() should call Superclass::GenerateOutputInformation() prior to changing the information.

virtual void itk::ProcessObject::GenerateOutputRequestedRegion ( DataObject * output ) [protected, virtual, inherited]

Given one output whose requested region has been set, how should the requested regions for the remaining outputs of the process object be set? By default, all the outputs are set to the same requested region. If a filter needs to produce different requested regions for each output, for instance an image processing filter producing several outputs at different resolutions, then that filter may override this method and set the requested regions appropriatedly.

Note that a filter producing multiple outputs of different types is required to override this method. The default implementation can only correctly handle multiple outputs of the same type.

Reimplemented in itk::MultiResolutionPyramidImageFilter< TInputImage, TOutputImage >, itk::RecursiveMultiResolutionPyramidImageFilter< TInputImage, TOutputImage >, itk::watershed::BoundaryResolver< TPixelType, TDimension >, itk::watershed::EquivalenceRelabeler< TScalarType, TImageDimension >, itk::watershed::Relabeler< TScalarType, TImageDimension >, itk::watershed::Segmenter< TInputImage >, itk::watershed::SegmentTreeGenerator< TScalarType >, itk::watershed::Relabeler< ScalarType, itkGetStaticConstMacro(ImageDimension)>, itk::watershed::Segmenter< InputImageType >, and itk::watershed::SegmentTreeGenerator< ScalarType >.

virtual const bool& itk::ProcessObject::GetAbortGenerateData ( ) [virtual, inherited]

Get the AbortGenerateData flag for the process object. Process objects may handle premature termination of execution in different ways.

Command* itk::Object::GetCommand ( unsigned long tag ) [inherited]

Get the command associated with the given tag. NOTE: This returns a pointer to a Command, but it is safe to asign this to a Command::Pointer. Since Command inherits from LightObject, at this point in the code, only a pointer or a reference to the Command can be used.

bool itk::Object::GetDebug ( ) const [inherited]

Get the value of the debug flag.

static bool itk::Object::GetGlobalWarningDisplay ( ) [static, inherited]

This is a global flag that controls whether any debug, warning or error messages are displayed.

const InputImageType* itk::PathAndImageToPathFilter< TFourierSeriesPath , TSwathMeritImage , OrthogonallyCorrected2DParametricPath >::GetImageInput ( void ) [inherited]

Set/Get the image input of this process object.

template<class TInputPath, class TOutputPath>

const InputPathType* itk::PathToPathFilter< TInputPath, TOutputPath >::GetInput ( void ) [inherited]

Set/Get the path input of this process object.

template<class TInputPath, class TOutputPath>

const InputPathType* itk::PathToPathFilter< TInputPath, TOutputPath >::GetInput ( unsigned int idx ) [inherited]

Set/Get the path input of this process object.

Reimplemented from itk::ProcessObject.

const DataObject* itk::ProcessObject::GetInput ( unsigned int idx ) const [protected, inherited]

Method used internally for getting an input.

Reimplemented in itk::MeshToMeshFilter< TInputMesh, TOutputMesh >, and itk::MeshToMeshFilter< TInput, TOutput >.

DataObjectPointerArray& itk::ProcessObject::GetInputs ( ) [inline, inherited]

Return an array with all the inputs of this process object. This is useful for tracing back in the pipeline to construct graphs etc.

Definition at line 108 of file itkProcessObject.h.

const MetaDataDictionary& itk::Object::GetMetaDataDictionary ( void ) const [inherited]

Returns:: A constant reference to this objects MetaDataDictionary.

MetaDataDictionary& itk::Object::GetMetaDataDictionary ( void ) [inherited]

Returns:: A reference to this objects MetaDataDictionary.

Warning:: This reference may be changed.

virtual unsigned long itk::Object::GetMTime ( ) const [virtual, inherited]

Return this objects modified time.

Referenced by itk::SpatialObject< ::itk::GetMeshDimension< TMesh >::PointDimension >::GetObjectMTime().

MultiThreader* itk::ProcessObject::GetMultiThreader ( ) [inline, inherited]

Return the multithreader used by this class.

Definition at line 284 of file itkProcessObject.h.

template<class TFourierSeriesPath , class TSwathMeritImage >

virtual const char* itk::OrthogonalSwath2DPathFilter< TFourierSeriesPath, TSwathMeritImage >::GetNameOfClass ( ) const [virtual]

Run-time type information (and related methods).

Reimplemented from itk::PathAndImageToPathFilter< TFourierSeriesPath, TSwathMeritImage, OrthogonallyCorrected2DParametricPath >.

DataObjectPointerArraySizeType itk::ProcessObject::GetNumberOfInputs ( ) const [inline, inherited]

Get the size of the input vector. This is merely the size of the input vector, not the number of inputs that have valid DataObject's assigned. Use GetNumberOfValidRequiredInputs() to determine how many inputs are non-null.

Definition at line 118 of file itkProcessObject.h.

DataObjectPointerArraySizeType itk::ProcessObject::GetNumberOfOutputs ( ) const [inline, inherited]

Return an array with all the outputs of this process object. This is useful for tracing forward in the pipeline to contruct graphs etc.

Definition at line 135 of file itkProcessObject.h.

virtual const unsigned int& itk::ProcessObject::GetNumberOfRequiredInputs ( ) [protected, virtual, inherited]

Protected methods for setting inputs. Subclasses make use of them for setting input.

virtual const unsigned int& itk::ProcessObject::GetNumberOfRequiredOutputs ( ) [protected, virtual, inherited]

Protected methods for setting outputs. Subclasses make use of them for getting output.

virtual const int& itk::ProcessObject::GetNumberOfThreads ( ) [virtual, inherited]

Get/Set the number of threads to create when executing.

Referenced by itk::BSplineScatteredDataPointSetToImageFilter< TInputPointSet, TOutputImage >::SplitRequestedRegion().

virtual DataObjectPointerArraySizeType itk::ProcessObject::GetNumberOfValidRequiredInputs ( ) const [virtual, inherited]

Get the number of valid inputs. This is the number of non-null entries in the input vector in the first NumberOfRequiredInputs slots. This method is used to determine whether the necessary required inputs have been set. Subclasses of ProcessObject may override this implementation if the required inputs are not the first slots in input vector.

Reimplemented in itk::MultiResolutionPDEDeformableRegistration< TFixedImage, TMovingImage, TDeformationField, TRealType >, and itk::PDEDeformableRegistrationFilter< TFixedImage, TMovingImage, TDeformationField >.

template<class TOutputPath>

OutputPathType* itk::PathSource< TOutputPath >::GetOutput ( unsigned int idx ) [inherited]

Get the output data of this process object. The output of this function is not valid until an appropriate Update() method has been called, either explicitly or implicitly. Both the filter itself and the data object have Update() methods, and both methods update the data. Here are three ways to use GetOutput() and make sure the data is valid. In these examples, image is a pointer to some Image object, and the particular ProcessObjects involved are filters. The same examples apply to non-image (e.g. Mesh) data as well.

   anotherFilter->SetInput( someFilter->GetOutput() );
   anotherFilter->Update();

In this situation, someFilter and anotherFilter are said to constitute a pipeline.

   image = someFilter->GetOutput();
   image->Update();

   someFilter->Update();
   image = someFilter->GetOutput();

(In the above example, the two lines of code can be in either order.)

Note that Update() is not called automatically except within a pipeline as in the first example. When streaming (using a StreamingImageFilter) is activated, it may be more efficient to use a pipeline than to call Update() once for each filter in turn.

For an image, the data generated is for the requested Region, which can be set using ImageBase::SetRequestedRegion(). By default, the largest possible region is requested.

Reimplemented from itk::ProcessObject.

const DataObject* itk::ProcessObject::GetOutput ( unsigned int idx ) const [protected, inherited]

Method used internally for getting an output.

template<class TOutputPath>

OutputPathType* itk::PathSource< TOutputPath >::GetOutput ( void ) [inherited]

Get the output data of this process object. The output of this function is not valid until an appropriate Update() method has been called, either explicitly or implicitly. Both the filter itself and the data object have Update() methods, and both methods update the data. Here are three ways to use GetOutput() and make sure the data is valid. In these examples, image is a pointer to some Image object, and the particular ProcessObjects involved are filters. The same examples apply to non-image (e.g. Mesh) data as well.

   anotherFilter->SetInput( someFilter->GetOutput() );
   anotherFilter->Update();

In this situation, someFilter and anotherFilter are said to constitute a pipeline.

   image = someFilter->GetOutput();
   image->Update();

   someFilter->Update();
   image = someFilter->GetOutput();

(In the above example, the two lines of code can be in either order.)

Note that Update() is not called automatically except within a pipeline as in the first example. When streaming (using a StreamingImageFilter) is activated, it may be more efficient to use a pipeline than to call Update() once for each filter in turn.

For an image, the data generated is for the requested Region, which can be set using ImageBase::SetRequestedRegion(). By default, the largest possible region is requested.

DataObjectPointerArray& itk::ProcessObject::GetOutputs ( ) [inline, inherited]

Return an array with all the outputs of this process object. This is useful for tracing forward in the pipeline to contruct graphs etc.

Definition at line 133 of file itkProcessObject.h.

const InputPathType* itk::PathAndImageToPathFilter< TFourierSeriesPath , TSwathMeritImage , OrthogonallyCorrected2DParametricPath >::GetPathInput ( void ) [inherited]

Set/Get the path input of this process object.

virtual const float& itk::ProcessObject::GetProgress ( ) [virtual, inherited]

Get the execution progress of a process object. The progress is a floating number in [0,1] with 0 meaning no progress and 1 meaning the filter has completed execution.

Referenced by itk::XMLFilterWatcher::ShowProgress().

virtual int itk::LightObject::GetReferenceCount ( ) const [inline, virtual, inherited]

Gets the reference count on this object.

Definition at line 106 of file itkLightObject.h.

virtual const bool& itk::ProcessObject::GetReleaseDataBeforeUpdateFlag ( ) [virtual, inherited]

Turn on/off the flags to control whether the bulk data belonging to the outputs of this ProcessObject are released/reallocated during an Update(). In limited memory scenarios, a user may want to force the elements of a pipeline to release any bulk data that is going to be regenerated anyway during an Update() in order to control peak memory allocation. Note that this flag is different from the ReleaseDataFlag. ReleaseDataFlag manages the deallocation of a ProcessObject's bulk output data once that data has been consumed by a downstream ProcessObject. The ReleaseDataBeforeUpdateFlag manages the deallocation/reallocation of bulk data during a pipeline update to control peak memory utilization. Default value is on.

virtual bool itk::ProcessObject::GetReleaseDataFlag ( ) const [virtual, inherited]

Turn on/off the flags to control whether the bulk data belonging to the outputs of this ProcessObject are released after being used by a downstream ProcessObject. Default value is off. Another options for controlling memory utilization is the ReleaseDataBeforeUpdateFlag.

static void itk::Object::GlobalWarningDisplayOff ( ) [inline, static, inherited]

This is a global flag that controls whether any debug, warning or error messages are displayed.

Definition at line 100 of file itkObject.h.

References itk::Object::SetGlobalWarningDisplay().

static void itk::Object::GlobalWarningDisplayOn ( ) [inline, static, inherited]

This is a global flag that controls whether any debug, warning or error messages are displayed.

Definition at line 98 of file itkObject.h.

References itk::Object::SetGlobalWarningDisplay().

template<class TOutputPath>

virtual void itk::PathSource< TOutputPath >::GraftNthOutput	(	unsigned int	idx,
		OutputPathType *	output
	)			`[virtual, inherited]`

Graft the specified data object onto this ProcessObject's idx'th output. This is the similar to GraftOutput method except is allows you specify which output is affected. The specified index must be a valid output number (less than ProcessObject::GetNumberOfOutputs()). See the GraftOutput for general usage information.

template<class TOutputPath>

virtual void itk::PathSource< TOutputPath >::GraftOutput ( OutputPathType * output ) [virtual, inherited]

Graft the specified DataObject onto this ProcessObject's output. This method grabs a handle to the specified DataObject's path data to use as its output's own path data. It also copies the region ivars (RequestedRegion, BufferedRegion, LargestPossibleRegion) and meta-data (Spacing, Origin) from the specified data object into this filter's output data object. Most importantly, however, it leaves the Source ivar untouched so the original pipeline routing is intact. This method is used when a process object is implemented using a mini-pipeline which is defined in its GenerateData() method. The usage is:

    // setup the mini-pipeline to process the input to this filter
    firstFilterInMiniPipeline->SetInput( this->GetInput() );

    // setup the mini-pipeline to calculate the correct regions
    // and write to the appropriate bulk data block
    lastFilterInMiniPipeline->GraftOutput( this->GetOutput() );

    // execute the mini-pipeline
    lastFilterInMiniPipeline->Update();

    // graft the mini-pipeline output back onto this filter's output.
    // this is needed to get the appropriate regions passed back.
    this->GraftOutput( lastFilterInMiniPipeline->GetOutput() );

For proper pipeline execution, a filter using a mini-pipeline must implement the GeneratseInputRequestedRegion(), GenerateOutputRequestedRegion(), GenerateOutputInformation() and EnlargeOutputRequestedRegion() methods as necessary to reflect how the mini-pipeline will execute (in other words, the outer filter's pipeline mechanism must be consistent with what the mini-pipeline will do).

bool itk::Object::HasObserver ( const EventObject & event ) const [inherited]

Return true if an observer is registered for this event.

void itk::Object::InvokeEvent ( const EventObject & ) [inherited]

Call Execute on all the Commands observing this event id.

void itk::Object::InvokeEvent ( const EventObject & ) const [inherited]

Call Execute on all the Commands observing this event id. The actions triggered by this call doesn't modify this object.

template<class TOutputPath>

virtual DataObjectPointer itk::PathSource< TOutputPath >::MakeOutput ( unsigned int idx ) [virtual, inherited]

Make a DataObject of the correct type to used as the specified output. Every ProcessObject subclass must be able to create a DataObject that can be used as a specified output. This method is automatically called when DataObject::DisconnectPipeline() is called. DataObject::DisconnectPipeline, disconnects a data object from being an output of its current source. When the data object is disconnected, the ProcessObject needs to construct a replacement output data object so that the ProcessObject is in a valid state. So DataObject::DisconnectPipeline eventually calls ProcessObject::MakeOutput. Note that MakeOutput always returns a SmartPointer to a DataObject. If a subclass of ImageSource has multiple outputs of different types, then that class must provide an implementation of MakeOutput().

Reimplemented from itk::ProcessObject.

virtual void itk::Object::Modified ( ) const [virtual, inherited]

Update the modification time for this object. Many filters rely on the modification time to determine if they need to recompute their data.

Referenced by itk::NarrowBandImageFilterBase< TInputImage, Image< TOutputPixelType,::itk::GetImageDimension< TInputImage >::ImageDimension > >::InsertNarrowBandNode(), itk::MatrixOffsetTransformBase< TScalarType, 3, 3 >::SetCenter(), itk::MatrixOffsetTransformBase< TScalarType, 3, 3 >::SetMatrix(), itk::NarrowBandImageFilterBase< TInputImage, Image< TOutputPixelType,::itk::GetImageDimension< TInputImage >::ImageDimension > >::SetNarrowBand(), itk::NarrowBandImageFilterBase< TInputImage, Image< TOutputPixelType,::itk::GetImageDimension< TInputImage >::ImageDimension > >::SetNarrowBandInnerRadius(), itk::NarrowBandImageFilterBase< TInputImage, Image< TOutputPixelType,::itk::GetImageDimension< TInputImage >::ImageDimension > >::SetNarrowBandTotalRadius(), itk::MatrixOffsetTransformBase< TScalarType, 3, 3 >::SetOffset(), itk::ThresholdLabelerImageFilter< TInputImage, TOutputImage >::SetRealThresholds(), itk::ThresholdLabelerImageFilter< TInputImage, TOutputImage >::SetThresholds(), itk::Statistics::GoodnessOfFitFunctionBase< TInputHistogram >::SetTotalObservedScale(), and itk::MatrixOffsetTransformBase< TScalarType, 3, 3 >::SetTranslation().

template<class TFourierSeriesPath , class TSwathMeritImage >

static Pointer itk::OrthogonalSwath2DPathFilter< TFourierSeriesPath, TSwathMeritImage >::New ( ) [static]

Method for creation through the object factory.

Reimplemented from itk::PathAndImageToPathFilter< TFourierSeriesPath, TSwathMeritImage, OrthogonallyCorrected2DParametricPath >.

virtual void itk::ProcessObject::PopBackInput ( ) [protected, virtual, inherited]

Push/Pop an input of this process object. These methods allow a filter to model its input vector as a queue or stack. These routines may not be appropriate for all filters, especially filters with different types of inputs. These routines follow the semantics of STL.

virtual void itk::ProcessObject::PopFrontInput ( ) [protected, virtual, inherited]

Push/Pop an input of this process object. These methods allow a filter to model its input vector as a queue or stack. These routines may not be appropriate for all filters, especially filters with different types of inputs. These routines follow the semantics of STL.

virtual void itk::ProcessObject::PrepareOutputs ( ) [virtual, inherited]

An opportunity to deallocate a ProcessObject's bulk data storage. Some filters may wish to reuse existing bulk data storage to avoid unnecessary deallocation/allocation sequences. The default implementation calls Initialize() on each output. DataObject::Initialize() frees its bulk data by default.

Reimplemented in itk::WatershedImageFilter< TInputImage >.

void itk::LightObject::Print	(	std::ostream &	os,
		Indent	indent = `0`
	)			const `[inherited]`

Cause the object to print itself out.

Referenced by itk::WeakPointer< ProcessObject >::Print().

virtual void itk::LightObject::PrintHeader	(	std::ostream &	os,
		Indent	indent
	)			const `[protected, virtual, inherited]`

Methods invoked by Print() to print information about the object including superclasses. Typically not called by the user (use Print() instead) but used in the hierarchical print process to combine the output of several classes.

bool itk::Object::PrintObservers	(	std::ostream &	os,
		Indent	indent
	)			const `[protected, inherited]`

template<class TFourierSeriesPath , class TSwathMeritImage >

void itk::OrthogonalSwath2DPathFilter< TFourierSeriesPath, TSwathMeritImage >::PrintSelf	(	std::ostream &	os,
		Indent	indent
	)			const `[protected, virtual]`

Methods invoked by Print() to print information about the object including superclasses. Typically not called by the user (use Print() instead) but used in the hierarchical print process to combine the output of several classes.

Reimplemented from itk::PathAndImageToPathFilter< TFourierSeriesPath, TSwathMeritImage, OrthogonallyCorrected2DParametricPath >.

virtual void itk::LightObject::PrintTrailer	(	std::ostream &	os,
		Indent	indent
	)			const `[protected, virtual, inherited]`

Methods invoked by Print() to print information about the object including superclasses. Typically not called by the user (use Print() instead) but used in the hierarchical print process to combine the output of several classes.

virtual void itk::ProcessObject::PropagateRequestedRegion ( DataObject * output ) [virtual, inherited]

Send the requested region information back up the pipeline (to the filters that preceed this one).

Reimplemented in itk::StreamingImageFilter< TInputImage, TOutputImage >, and itk::VTKImageImport< TOutputImage >.

virtual void itk::ProcessObject::PropagateResetPipeline ( ) [protected, virtual, inherited]

Called to allocate the input array. Copies old inputs. Propagate a call to ResetPipeline() up the pipeline. Called only from DataObject.

virtual void itk::ProcessObject::PushBackInput ( const DataObject * input ) [protected, virtual, inherited]

Push/Pop an input of this process object. These methods allow a filter to model its input vector as a queue or stack. These routines may not be appropriate for all filters, especially filters with different types of inputs. These routines follow the semantics of STL.

virtual void itk::ProcessObject::PushFrontInput ( const DataObject * input ) [protected, virtual, inherited]

Push/Pop an input of this process object. These methods allow a filter to model its input vector as a queue or stack. These routines may not be appropriate for all filters, especially filters with different types of inputs. These routines follow the semantics of STL.

virtual void itk::Object::Register ( ) const [virtual, inherited]

Increase the reference count (mark as used by another object).

Reimplemented from itk::LightObject.

virtual void itk::ProcessObject::ReleaseDataBeforeUpdateFlagOff ( ) [virtual, inherited]

Turn on/off the flags to control whether the bulk data belonging to the outputs of this ProcessObject are released/reallocated during an Update(). In limited memory scenarios, a user may want to force the elements of a pipeline to release any bulk data that is going to be regenerated anyway during an Update() in order to control peak memory allocation. Note that this flag is different from the ReleaseDataFlag. ReleaseDataFlag manages the deallocation of a ProcessObject's bulk output data once that data has been consumed by a downstream ProcessObject. The ReleaseDataBeforeUpdateFlag manages the deallocation/reallocation of bulk data during a pipeline update to control peak memory utilization. Default value is on.

virtual void itk::ProcessObject::ReleaseDataBeforeUpdateFlagOn ( ) [virtual, inherited]

Turn on/off the flags to control whether the bulk data belonging to the outputs of this ProcessObject are released/reallocated during an Update(). In limited memory scenarios, a user may want to force the elements of a pipeline to release any bulk data that is going to be regenerated anyway during an Update() in order to control peak memory allocation. Note that this flag is different from the ReleaseDataFlag. ReleaseDataFlag manages the deallocation of a ProcessObject's bulk output data once that data has been consumed by a downstream ProcessObject. The ReleaseDataBeforeUpdateFlag manages the deallocation/reallocation of bulk data during a pipeline update to control peak memory utilization. Default value is on.

void itk::ProcessObject::ReleaseDataFlagOff ( ) [inline, inherited]

Turn on/off the flags to control whether the bulk data belonging to the outputs of this ProcessObject are released after being used by a downstream ProcessObject. Default value is off. Another options for controlling memory utilization is the ReleaseDataBeforeUpdateFlag.

Definition at line 257 of file itkProcessObject.h.

void itk::ProcessObject::ReleaseDataFlagOn ( ) [inline, inherited]

Turn on/off the flags to control whether the bulk data belonging to the outputs of this ProcessObject are released after being used by a downstream ProcessObject. Default value is off. Another options for controlling memory utilization is the ReleaseDataBeforeUpdateFlag.

Definition at line 256 of file itkProcessObject.h.

virtual void itk::ProcessObject::ReleaseInputs ( ) [protected, virtual, inherited]

A filter may need to release its input's bulk data after it has finished calculating a new output. The filter may need to release the inputs because the user has turned on the ReleaseDataFlag or it may need to release the inputs because the filter is an "in place" filter and it has overwritten its input with its output data. The implementation here simply checks the ReleaseDataFlag of the inputs. InPlaceImageFilter overrides this method so release the input it has overwritten.

See also:: InPlaceImageFilter::ReleaseInputs()

void itk::Object::RemoveAllObservers ( ) [inherited]

Remove all observers .

virtual void itk::ProcessObject::RemoveInput ( DataObject * input ) [protected, virtual, inherited]

Protected methods for setting inputs. Subclasses make use of them for setting input.

void itk::Object::RemoveObserver ( unsigned long tag ) [inherited]

Remove the observer with this tag value.

virtual void itk::ProcessObject::RemoveOutput ( DataObject * output ) [protected, virtual, inherited]

Protected methods for setting outputs. Subclasses make use of them for getting output.

virtual void itk::ProcessObject::ResetPipeline ( ) [virtual, inherited]

Reset the pipeline. If an exception is thrown during an Update(), the pipeline may be in an inconsistent state. This method clears the internal state of the pipeline so Update() can be called.

virtual void itk::ProcessObject::RestoreInputReleaseDataFlags ( ) [protected, virtual, inherited]

Restore the cached input ReleaseDataFlags.

virtual void itk::ProcessObject::SetAbortGenerateData ( bool _arg ) [virtual, inherited]

Set the AbortGenerateData flag for the process object. Process objects may handle premature termination of execution in different ways.

void itk::Object::SetDebug ( bool debugFlag ) const [inherited]

Set the value of the debug flag. A non-zero value turns debugging on.

static void itk::Object::SetGlobalWarningDisplay ( bool flag ) [static, inherited]

This is a global flag that controls whether any debug, warning or error messages are displayed.

Referenced by itk::Object::GlobalWarningDisplayOff(), and itk::Object::GlobalWarningDisplayOn().

virtual void itk::PathAndImageToPathFilter< TFourierSeriesPath , TSwathMeritImage , OrthogonallyCorrected2DParametricPath >::SetImageInput ( const TSwathMeritImage * image ) [virtual, inherited]

Set/Get the image input of this process object.

template<class TInputPath, class TOutputPath>

virtual void itk::PathToPathFilter< TInputPath, TOutputPath >::SetInput	(	unsigned	int,
		const TInputPath *	path
	)			`[virtual, inherited]`

Set/Get the path input of this process object.

template<class TInputPath, class TOutputPath>

virtual void itk::PathToPathFilter< TInputPath, TOutputPath >::SetInput ( const InputPathType * path ) [virtual, inherited]

Set/Get the path input of this process object.

void itk::Object::SetMetaDataDictionary ( const MetaDataDictionary & rhs ) [inherited]

Returns:: Set the MetaDataDictionary

virtual void itk::ProcessObject::SetNthInput	(	unsigned int	num,
		DataObject *	input
	)			`[protected, virtual, inherited]`

Protected methods for setting inputs. Subclasses make use of them for setting input.

Reimplemented in itk::ImageToVectorImageFilter< TInputImage >.

Referenced by itk::watershed::BoundaryResolver< TPixelType, TDimension >::SetBoundaryA(), itk::watershed::BoundaryResolver< TPixelType, TDimension >::SetBoundaryB(), itk::watershed::EquivalenceRelabeler< TScalarType, TImageDimension >::SetEquivalencyTable(), itk::SegmentationLevelSetImageFilter< TInputImage, TFeatureImage, TOutputPixelType >::SetFeatureImage(), itk::NarrowBandLevelSetImageFilter< TInputImage, TFeatureImage, TOutputPixelType, Image< TOutputPixelType,::itk::GetImageDimension< TInputImage >::ImageDimension > >::SetFeatureImage(), itk::WatershedImageFilter< TInputImage >::SetInput(), itk::watershed::SegmentTreeGenerator< ScalarType >::SetInputEquivalencyTable(), itk::watershed::Segmenter< InputImageType >::SetInputImage(), itk::watershed::Relabeler< ScalarType, itkGetStaticConstMacro(ImageDimension)>::SetInputImage(), itk::watershed::EquivalenceRelabeler< TScalarType, TImageDimension >::SetInputImage(), itk::watershed::SegmentTreeGenerator< ScalarType >::SetInputSegmentTable(), itk::watershed::Relabeler< ScalarType, itkGetStaticConstMacro(ImageDimension)>::SetInputSegmentTree(), itk::DiffusionTensor3DReconstructionImageFilter< TReferenceImagePixelType, TGradientImagePixelType, TTensorPixelType >::SetReferenceImage(), and itk::ChangeInformationImageFilter< TInputImage >::SetReferenceImage().

virtual void itk::ProcessObject::SetNthOutput	(	unsigned int	num,
		DataObject *	output
	)			`[protected, virtual, inherited]`

Protected methods for setting outputs. Subclasses make use of them for getting output.

Referenced by itk::watershed::BoundaryResolver< TPixelType, TDimension >::BoundaryResolver(), itk::watershed::EquivalenceRelabeler< TScalarType, TImageDimension >::EquivalenceRelabeler(), itk::watershed::Segmenter< InputImageType >::SetBoundary(), itk::watershed::BoundaryResolver< TPixelType, TDimension >::SetEquivalencyTable(), itk::watershed::Segmenter< InputImageType >::SetOutputImage(), itk::watershed::Relabeler< ScalarType, itkGetStaticConstMacro(ImageDimension)>::SetOutputImage(), itk::watershed::EquivalenceRelabeler< TScalarType, TImageDimension >::SetOutputImage(), and itk::watershed::Segmenter< InputImageType >::SetSegmentTable().

void itk::ProcessObject::SetNumberOfInputs ( unsigned int num ) [protected, inherited]

Called to allocate the input array. Copies old inputs.

void itk::ProcessObject::SetNumberOfOutputs ( unsigned int num ) [protected, inherited]

Called to allocate the output array. Copies old outputs.

virtual void itk::ProcessObject::SetNumberOfRequiredInputs ( unsigned int _arg ) [protected, virtual, inherited]

Protected methods for setting inputs. Subclasses make use of them for setting input.

virtual void itk::ProcessObject::SetNumberOfRequiredOutputs ( unsigned int _arg ) [protected, virtual, inherited]

Protected methods for setting outputs. Subclasses make use of them for getting output.

virtual void itk::ProcessObject::SetNumberOfThreads ( int _arg ) [virtual, inherited]

Get/Set the number of threads to create when executing.

virtual void itk::PathAndImageToPathFilter< TFourierSeriesPath , TSwathMeritImage , OrthogonallyCorrected2DParametricPath >::SetPathInput ( const TFourierSeriesPath * path ) [virtual, inherited]

Set/Get the path input of this process object.

virtual void itk::ProcessObject::SetProgress ( float _arg ) [virtual, inherited]

Set the execution progress of a process object. The progress is a floating number in [0,1] with 0 meaning no progress and 1 meaning the filter has completed execution. The ProgressEvent is NOT invoked.

virtual void itk::Object::SetReferenceCount ( int ) [virtual, inherited]

Sets the reference count (use with care)

Reimplemented from itk::LightObject.

virtual void itk::ProcessObject::SetReleaseDataBeforeUpdateFlag ( bool _arg ) [virtual, inherited]

Turn on/off the flags to control whether the bulk data belonging to the outputs of this ProcessObject are released/reallocated during an Update(). In limited memory scenarios, a user may want to force the elements of a pipeline to release any bulk data that is going to be regenerated anyway during an Update() in order to control peak memory allocation. Note that this flag is different from the ReleaseDataFlag. ReleaseDataFlag manages the deallocation of a ProcessObject's bulk output data once that data has been consumed by a downstream ProcessObject. The ReleaseDataBeforeUpdateFlag manages the deallocation/reallocation of bulk data during a pipeline update to control peak memory utilization. Default value is on.

virtual void itk::ProcessObject::SetReleaseDataFlag ( bool flag ) [virtual, inherited]

Turn on/off the flags to control whether the bulk data belonging to the outputs of this ProcessObject are released after being used by a downstream ProcessObject. Default value is off. Another options for controlling memory utilization is the ReleaseDataBeforeUpdateFlag.

virtual void itk::Object::UnRegister ( ) const [virtual, inherited]

Decrease the reference count (release by another object).

Reimplemented from itk::LightObject.

virtual void itk::ProcessObject::Update ( ) [virtual, inherited]

Bring this filter up-to-date. Update() checks modified times against last execution times, and re-executes objects if necessary. A side effect of this method is that the whole pipeline may execute in order to bring this filter up-to-date. This method updates the currently prescribed requested region. If no requested region has been set on the output, then the requested region will be set to the largest possible region. Once the requested region is set, Update() will make sure the specified requested region is up-to-date. This is a confusing side effect to users who are just calling Update() on a filter. A first call to Update() will cause the largest possible region to be updated. A second call to Update() will update that same region. If a modification to the upstream pipeline cause a filter to have a different largest possible region, this second call to Update() will not cause the output requested region to be reset to the new largest possible region. Instead, the output requested region will be the same as the last time Update() was called. To have a filter always to produce its largest possible region, users should call UpdateLargestPossibleRegion() instead.

Reimplemented in itk::CoreAtomImageToUnaryCorrespondenceMatrixProcess< TSourceImage >, itk::MedialNodePairCorrespondenceProcess< TSourceImage >, itk::MedialNodeTripletCorrespondenceProcess< TSourceImage >, itk::CoreAtomImageToDistanceMatrixProcess< TSourceImage >, itk::ImageFileWriter< TInputImage >, and itk::ImageSeriesWriter< TInputImage, TOutputImage >.

virtual void itk::ProcessObject::UpdateLargestPossibleRegion ( ) [virtual, inherited]

Like Update(), but sets the output requested region to the largest possible region for the output. This is the method users should call if they want the entire dataset to be processed. If a user wants to update the same output region as a previous call to Update() or a previous call to UpdateLargestPossibleRegion(), then they should call the method Update().

virtual void itk::ProcessObject::UpdateOutputData ( DataObject * output ) [virtual, inherited]

Actually generate new output

Reimplemented in itk::StreamingImageFilter< TInputImage, TOutputImage >.

virtual void itk::ProcessObject::UpdateOutputInformation ( ) [virtual, inherited]

Update the information decribing the output data. This method transverses up the pipeline gathering modified time information. On the way back down the pipeline, this method calls GenerateOutputInformation() to set any necessary information about the output data objects. For instance, a filter that shrinks an image will need to provide an implementation for GenerateOutputInformation() that changes the spacing of the pixels. Such filters should call their superclass' implementation of GenerateOutputInformation prior to changing the information values they need (i.e. GenerateOutputInformation() should call Superclass::GenerateOutputInformation() prior to changing the information.

Reimplemented in itk::watershed::Segmenter< TInputImage >, itk::VTKImageImport< TOutputImage >, and itk::watershed::Segmenter< InputImageType >.

void itk::ProcessObject::UpdateProgress ( float amount ) [inherited]

Update the progress of the process object.

Sets the Progress ivar to amount and invokes any observers for the ProgressEvent. The parameter amount should be in [0,1] and is the cumulative (not incremental) progress.

Member Data Documentation

const unsigned int itk::PathAndImageToPathFilter< TFourierSeriesPath , TSwathMeritImage , OrthogonallyCorrected2DParametricPath >::InputImageDimension [static, inherited]

ImageDimension constants

Definition at line 74 of file itkPathAndImageToPathFilter.h.

TimeStamp itk::ProcessObject::m_OutputInformationMTime [protected, inherited]

Time when GenerateOutputInformation was last called.

Definition at line 431 of file itkProcessObject.h.

InternalReferenceCountType itk::LightObject::m_ReferenceCount [mutable, protected, inherited]

Number of uses of this object by other objects.

Definition at line 144 of file itkLightObject.h.

SimpleFastMutexLock itk::LightObject::m_ReferenceCountLock [mutable, protected, inherited]

Mutex lock to protect modification to the reference count

Definition at line 147 of file itkLightObject.h.

bool itk::ProcessObject::m_Updating [protected, inherited]

These ivars are made protected so filters like itkStreamingImageFilter can access them directly. This flag indicates when the pipeline is executing. It prevents infinite recursion when pipelines have loops.

Definition at line 428 of file itkProcessObject.h.

The documentation for this class was generated from the following file:

itkOrthogonalSwath2DPathFilter.h

itk::OrthogonalSwath2DPathFilter< TFourierSeriesPath, TSwathMeritImage > Class Template Reference

Public Types

Public Member Functions

Static Public Member Functions

Static Public Attributes

Protected Types

Protected Member Functions

Protected Attributes

Detailed Description

template<class TFourierSeriesPath, class TSwathMeritImage> class itk::OrthogonalSwath2DPathFilter< TFourierSeriesPath, TSwathMeritImage >

Member Typedef Documentation

Constructor & Destructor Documentation

Member Function Documentation

Member Data Documentation

template<class TFourierSeriesPath, class TSwathMeritImage>
class itk::OrthogonalSwath2DPathFilter< TFourierSeriesPath, TSwathMeritImage >