SphinxExamples/src/Registration/Common/PerformMultiModalityRegistrationWithMutualInformation/Code.cxx

/*=========================================================================
 *
 *  Copyright NumFOCUS
 *
 *  Licensed under the Apache License, Version 2.0 (the "License");
 *  you may not use this file except in compliance with the License.
 *  You may obtain a copy of the License at
 *
 *         http://www.apache.org/licenses/LICENSE-2.0.txt
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS,
 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 *=========================================================================*/
 
// The following simple example illustrates how multiple imaging modalities can
// be registered using the ITK registration framework. The first difference
// between this and previous examples is the use of the
// MutualInformationImageToImageMetric as the cost-function to be
// optimized. The second difference is the use of the
// GradientDescentOptimizer. Due to the stochastic nature of the
// metric computation, the values are too noisy to work successfully with the
// RegularStepGradientDescentOptimizer.  Therefore, we will use the
// simpler GradientDescentOptimizer with a user defined learning rate.  The
// following headers declare the basic components of this registration method.
#include "itkImageRegistrationMethod.h"
#include "itkTranslationTransform.h"
#include "itkMutualInformationImageToImageMetric.h"
#include "itkGradientDescentOptimizer.h"
 
 
//  One way to simplify the computation of the mutual information is
//  to normalize the statistical distribution of the two input images. The
//  NormalizeImageFilter is the perfect tool for this task.
//  It rescales the intensities of the input images in order to produce an
//  output image with zero mean and unit variance.
#include "itkNormalizeImageFilter.h"
 
//  Additionally, low-pass filtering of the images to be registered will also
//  increase robustness against noise. In this example, we will use the
//  DiscreteGaussianImageFilter for that purpose.
#include "itkDiscreteGaussianImageFilter.h"
 
 
#include "itkImageFileReader.h"
#include "itkImageFileWriter.h"
 
#include "itkResampleImageFilter.h"
#include "itkCastImageFilter.h"
#include "itkCheckerBoardImageFilter.h"
 
 
//  The following section of code implements a Command observer
//  that will monitor the evolution of the registration process.
//
#include "itkCommand.h"
class CommandIterationUpdate : public itk::Command
{
public:
  using Self = CommandIterationUpdate;
  using Superclass = itk::Command;
  using Pointer = itk::SmartPointer<Self>;
  itkNewMacro(Self);
 
protected:
  CommandIterationUpdate() = default;
 
public:
  using OptimizerType = itk::GradientDescentOptimizer;
  using OptimizerPointer = const OptimizerType *;
 
  void
  Execute(itk::Object * caller, const itk::EventObject & event) override
  {
    Execute((const itk::Object *)caller, event);
  }
 
  void
  Execute(const itk::Object * object, const itk::EventObject & event) override
  {
    auto optimizer = dynamic_cast<OptimizerPointer>(object);
    if (!itk::IterationEvent().CheckEvent(&event))
    {
      return;
    }
    std::cout << optimizer->GetCurrentIteration() << "   ";
    std::cout << optimizer->GetValue() << "   ";
    std::cout << optimizer->GetCurrentPosition() << std::endl;
  }
};
 
 
int
main(int argc, char * argv[])
{
  if (argc < 4)
  {
    std::cerr << "Missing Parameters " << std::endl;
    std::cerr << "Usage: " << argv[0];
    std::cerr << " fixedImageFile";
    std::cerr << " movingImageFile";
    std::cerr << " outputImageFile ";
    std::cerr << " [checkerBoardBefore]";
    std::cerr << " [checkerBoardAfter]" << std::endl;
    return EXIT_FAILURE;
  }
  const char * fixedImageFile = argv[1];
  const char * movingImageFile = argv[2];
  const char * outputImageFile = argv[3];
  const char * checkerBoardBefore = argv[4];
  const char * checkerBoardAfter = argv[5];
 
  constexpr unsigned int Dimension = 2;
  using PixelType = unsigned short;
 
  using FixedImageType = itk::Image<PixelType, Dimension>;
  using MovingImageType = itk::Image<PixelType, Dimension>;
 
  //  It is convenient to work with an internal image type because mutual
  //  information will perform better on images with a normalized statistical
  //  distribution. The fixed and moving images will be normalized and
  //  converted to this internal type.
  using InternalPixelType = float;
  using InternalImageType = itk::Image<InternalPixelType, Dimension>;
 
  using TransformType = itk::TranslationTransform<double, Dimension>;
  using OptimizerType = itk::GradientDescentOptimizer;
  using InterpolatorType = itk::LinearInterpolateImageFunction<InternalImageType, double>;
  using RegistrationType = itk::ImageRegistrationMethod<InternalImageType, InternalImageType>;
 
  using MetricType = itk::MutualInformationImageToImageMetric<InternalImageType, InternalImageType>;
 
 
  TransformType::Pointer    transform = TransformType::New();
  OptimizerType::Pointer    optimizer = OptimizerType::New();
  InterpolatorType::Pointer interpolator = InterpolatorType::New();
  RegistrationType::Pointer registration = RegistrationType::New();
  MetricType::Pointer       metric = MetricType::New();
 
  registration->SetOptimizer(optimizer);
  registration->SetTransform(transform);
  registration->SetInterpolator(interpolator);
  registration->SetMetric(metric);
 
  //  The metric requires a number of parameters to be selected, including
  //  the standard deviation of the Gaussian kernel for the fixed image
  //  density estimate, the standard deviation of the kernel for the moving
  //  image density and the number of samples use to compute the densities
  //  and entropy values. Experience has
  //  shown that a kernel standard deviation of 0.4 works well for images
  //  which have been normalized to a mean of zero and unit variance.  We
  //  will follow this empirical rule in this example.
  metric->SetFixedImageStandardDeviation(0.4);
  metric->SetMovingImageStandardDeviation(0.4);
 
  using FixedImageReaderType = itk::ImageFileReader<FixedImageType>;
  using MovingImageReaderType = itk::ImageFileReader<MovingImageType>;
 
  FixedImageReaderType::Pointer  fixedImageReader = FixedImageReaderType::New();
  MovingImageReaderType::Pointer movingImageReader = MovingImageReaderType::New();
 
  fixedImageReader->SetFileName(fixedImageFile);
  movingImageReader->SetFileName(movingImageFile);
 
  using FixedNormalizeFilterType = itk::NormalizeImageFilter<FixedImageType, InternalImageType>;
 
  using MovingNormalizeFilterType = itk::NormalizeImageFilter<MovingImageType, InternalImageType>;
 
  FixedNormalizeFilterType::Pointer fixedNormalizer = FixedNormalizeFilterType::New();
 
  MovingNormalizeFilterType::Pointer movingNormalizer = MovingNormalizeFilterType::New();
 
  using GaussianFilterType = itk::DiscreteGaussianImageFilter<InternalImageType, InternalImageType>;
 
  GaussianFilterType::Pointer fixedSmoother = GaussianFilterType::New();
  GaussianFilterType::Pointer movingSmoother = GaussianFilterType::New();
 
  fixedSmoother->SetVariance(2.0);
  movingSmoother->SetVariance(2.0);
 
  fixedNormalizer->SetInput(fixedImageReader->GetOutput());
  movingNormalizer->SetInput(movingImageReader->GetOutput());
 
  fixedSmoother->SetInput(fixedNormalizer->GetOutput());
  movingSmoother->SetInput(movingNormalizer->GetOutput());
 
  registration->SetFixedImage(fixedSmoother->GetOutput());
  registration->SetMovingImage(movingSmoother->GetOutput());
 
 
  fixedNormalizer->Update();
  FixedImageType::RegionType fixedImageRegion = fixedNormalizer->GetOutput()->GetBufferedRegion();
  registration->SetFixedImageRegion(fixedImageRegion);
 
  using ParametersType = RegistrationType::ParametersType;
  ParametersType initialParameters(transform->GetNumberOfParameters());
 
  initialParameters[0] = 0.0; // Initial offset in mm along X
  initialParameters[1] = 0.0; // Initial offset in mm along Y
 
  registration->SetInitialTransformParameters(initialParameters);
 
  //  We should now define the number of spatial samples to be considered in
  //  the metric computation. Note that we were forced to postpone this setting
  //  until we had done the preprocessing of the images because the number of
  //  samples is usually defined as a fraction of the total number of pixels in
  //  the fixed image.
  //
  //  The number of spatial samples can usually be as low as $1\%$ of the total
  //  number of pixels in the fixed image. Increasing the number of samples
  //  improves the smoothness of the metric from one iteration to another and
  //  therefore helps when this metric is used in conjunction with optimizers
  //  that rely of the continuity of the metric values. The trade-off, of
  //  course, is that a larger number of samples result in longer computation
  //  times per every evaluation of the metric.
  //
  //  It has been demonstrated empirically that the number of samples is not a
  //  critical parameter for the registration process. When you start fine
  //  tuning your own registration process, you should start using high values
  //  of number of samples, for example in the range of 20% to 50% of the
  //  number of pixels in the fixed image. Once you have succeeded to register
  //  your images you can then reduce the number of samples progressively until
  //  you find a good compromise on the time it takes to compute one evaluation
  //  of the Metric. Note that it is not useful to have very fast evaluations
  //  of the Metric if the noise in their values results in more iterations
  //  being required by the optimizer to converge.
  //  behavior of the metric values as the iterations progress.
  const unsigned int numberOfPixels = fixedImageRegion.GetNumberOfPixels();
 
  const auto numberOfSamples = static_cast<unsigned int>(numberOfPixels * 0.01);
 
  metric->SetNumberOfSpatialSamples(numberOfSamples);
 
  // For consistent results when regression testing.
  metric->ReinitializeSeed(121212);
 
 
  //  Since larger values of mutual information indicate better matches than
  //  smaller values, we need to maximize the cost function in this example.
  //  By default the GradientDescentOptimizer class is set to minimize the
  //  value of the cost-function. It is therefore necessary to modify its
  //  default behavior by invoking the MaximizeOn() method.
  //  Additionally, we need to define the optimizer's step size using the
  //  SetLearningRate() method.
  optimizer->SetNumberOfIterations(200);
  optimizer->MaximizeOn();
 
  // Note that large values of the learning rate will make the optimizer
  // unstable. Small values, on the other hand, may result in the optimizer
  // needing too many iterations in order to walk to the extrema of the cost
  // function. The easy way of fine tuning this parameter is to start with
  // small values, probably in the range of {5.0, 10.0}. Once the other
  // registration parameters have been tuned for producing convergence, you
  // may want to revisit the learning rate and start increasing its value until
  // you observe that the optimization becomes unstable.  The ideal value for
  // this parameter is the one that results in a minimum number of iterations
  // while still keeping a stable path on the parametric space of the
  // optimization. Keep in mind that this parameter is a multiplicative factor
  // applied on the gradient of the Metric. Therefore, its effect on the
  // optimizer step length is proportional to the Metric values themselves.
  // Metrics with large values will require you to use smaller values for the
  // learning rate in order to maintain a similar optimizer behavior.
  optimizer->SetLearningRate(15.0);
 
  CommandIterationUpdate::Pointer observer = CommandIterationUpdate::New();
  optimizer->AddObserver(itk::IterationEvent(), observer);
 
  try
  {
    registration->Update();
    std::cout << "Optimizer stop condition: " << registration->GetOptimizer()->GetStopConditionDescription()
              << std::endl;
  }
  catch (itk::ExceptionObject & err)
  {
    std::cout << "ExceptionObject caught !" << std::endl;
    std::cout << err << std::endl;
    return EXIT_FAILURE;
  }
 
  ParametersType finalParameters = registration->GetLastTransformParameters();
 
  double TranslationAlongX = finalParameters[0];
  double TranslationAlongY = finalParameters[1];
 
  unsigned int numberOfIterations = optimizer->GetCurrentIteration();
 
  double bestValue = optimizer->GetValue();
 
  // Print out results
  std::cout << std::endl;
  std::cout << "Result = " << std::endl;
  std::cout << " Translation X = " << TranslationAlongX << std::endl;
  std::cout << " Translation Y = " << TranslationAlongY << std::endl;
  std::cout << " Iterations    = " << numberOfIterations << std::endl;
  std::cout << " Metric value  = " << bestValue << std::endl;
  std::cout << " Numb. Samples = " << numberOfSamples << std::endl;
 
 
  using ResampleFilterType = itk::ResampleImageFilter<MovingImageType, FixedImageType>;
 
  TransformType::Pointer finalTransform = TransformType::New();
 
  finalTransform->SetParameters(finalParameters);
  finalTransform->SetFixedParameters(transform->GetFixedParameters());
 
  ResampleFilterType::Pointer resample = ResampleFilterType::New();
 
  resample->SetTransform(finalTransform);
  resample->SetInput(movingImageReader->GetOutput());
 
  FixedImageType::Pointer fixedImage = fixedImageReader->GetOutput();
 
  resample->SetSize(fixedImage->GetLargestPossibleRegion().GetSize());
  resample->SetOutputOrigin(fixedImage->GetOrigin());
  resample->SetOutputSpacing(fixedImage->GetSpacing());
  resample->SetOutputDirection(fixedImage->GetDirection());
  resample->SetDefaultPixelValue(100);
 
 
  using OutputPixelType = unsigned char;
 
  using OutputImageType = itk::Image<OutputPixelType, Dimension>;
 
  using CastFilterType = itk::CastImageFilter<FixedImageType, OutputImageType>;
 
  using WriterType = itk::ImageFileWriter<OutputImageType>;
 
  WriterType::Pointer     writer = WriterType::New();
  CastFilterType::Pointer caster = CastFilterType::New();
 
  writer->SetFileName(outputImageFile);
  caster->SetInput(resample->GetOutput());
  writer->SetInput(caster->GetOutput());
  writer->Update();
 
 
  // Generate checkerboards before and after registration
  using CheckerBoardFilterType = itk::CheckerBoardImageFilter<FixedImageType>;
 
  CheckerBoardFilterType::Pointer checker = CheckerBoardFilterType::New();
 
  checker->SetInput1(fixedImage);
  checker->SetInput2(resample->GetOutput());
 
  caster->SetInput(checker->GetOutput());
  writer->SetInput(caster->GetOutput());
 
  // Before registration
  TransformType::Pointer identityTransform = TransformType::New();
  identityTransform->SetIdentity();
  resample->SetTransform(identityTransform);
 
  if (argc > 4)
  {
    writer->SetFileName(checkerBoardBefore);
  }
 
  // After registration
  resample->SetTransform(finalTransform);
  if (argc > 5)
  {
    writer->SetFileName(checkerBoardAfter);
  }
 
  try
  {
    writer->Update();
  }
  catch (itk::ExceptionObject & error)
  {
    std::cerr << "Error: " << error << std::endl;
    return EXIT_FAILURE;
  }
 
  return EXIT_SUCCESS;
}