#include <itkProcessObject.h>

Inherits itk::Object.

Collaboration diagram for itk::ProcessObject:

Detailed Description

The base class for all process objects (source, filters, mappers) in the Insight data processing pipeline.

ProcessObject is an abstract object that specifies behavior and interface of network process objects (sources, filters, mappers). Source objects are creators of visualization data; filters input, process, and output image data; and mappers transform data into another form (like transforming coordinates or writing data to a file).

A major role of ProcessObject is to define the inputs and outputs of a filter. More than one input and/or output may exist for a given filter. Some classes (e.g., source objects or mapper objects) will not use inputs (the source) or outputs (mappers). In this case, the inputs or outputs is just ignored.

The inputs and outputs are referenced by name. The Primary input and the Primary output play a special role: they drive the pipeline.

In addition to the reference by name, it is possible to access the inputs and outputs with an index. The index is mapped internally to a name built as "IndexedDataObject" followed by the index. The indexed input or output 0 is mapped to the Primary input or output. The name of the Primary input or output is "Primary", but this can be changed with SetPrimaryInputName and SetPrimaryOutputName.

The inputs and outputs shouldn't be accessed by index in most cases. Using the name is most of the time a better solution. The access by index should be used only when the number of input or output of a filter is decided at run time.

ProcessObject invokes the following events: Command::StartEvent, Command::EndEvent These are convenience events you can use for any purpose (e.g., debugging info, highlighting/notifying user interface, etc.) See Command and LightObject for information on using AddObserver.

Another event Command::ProgressEvent can be observed. Some filters invoke this event periodically during their execution (with the progress, parameter, the fraction of work done). The use is similar to that of StartEvent and EndEvent. Filters may also check their AbortGenerateData flag to determine whether to prematurally end their execution.

An important feature of subclasses of ProcessObject is that it is possible to control the memory-management model (i.e., retain output versus delete output data). The ReleaseDataFlag enables the deletion of the output data once the downstream process object finishes processing the data (please see text). The ReleaseDataBeforeUpdateFlag enables the deletion of the ProcessObject's output data from a previous update if that output data is slated to be regenerated by the pipeline process. Setting this flag can control peak memory usage during a subsequent pipeline update. For a ProcessObject, the ReleaseDataFlag defaults to false and the ReleaseDataBeforeUpdateFlag defaults to true. Some subclasses of ProcessObject, for example ImageSource, use a default setting of false for the ReleaseDataBeforeUpdateFlag.

Subclasses of ProcessObject may override 4 of the methods of this class to control how a given filter may interact with the pipeline (dataflow). These methods are: GenerateOutputInformation(), EnlargeOutputRequestedRegion(), GenerateInputRequestedRegion(), and GenerateOutputRequestedRegion(). By overriding these methods, a filter can deviate from the base assumptions of the pipeline execution model.

Definition at line 112 of file itkProcessObject.h.

Classes
struct	NameComparator

class	ProcessObjectDomainThreader
	Multi-threaded processing on a domain by processing sub-domains per thread. More...

Public Types
typedef SmartPointer< const Self >	ConstPointer

typedef DataObject::DataObjectIdentifierType	DataObjectIdentifierType

typedef DataObject::Pointer	DataObjectPointer

typedef std::vector < DataObjectPointer >	DataObjectPointerArray

typedef DataObjectPointerArray::size_type	DataObjectPointerArraySizeType

typedef std::vector < DataObjectIdentifierType >	NameArray

typedef SmartPointer< Self >	Pointer

typedef ProcessObject	Self

typedef Object	Superclass

Public Types inherited from itk::Object
typedef SmartPointer< const Self >	ConstPointer

typedef SmartPointer< Self >	Pointer

typedef Object	Self

typedef LightObject	Superclass

Public Types inherited from itk::LightObject
typedef SmartPointer< const Self >	ConstPointer

typedef SmartPointer< Self >	Pointer

typedef LightObject	Self

Public Member Functions
virtual void	AbortGenerateDataOff ()

virtual void	AbortGenerateDataOn ()

virtual void	EnlargeOutputRequestedRegion (DataObject *)

virtual const bool &	GetAbortGenerateData ()

NameArray	GetInputNames () const

MultiThreader *	GetMultiThreader () const

virtual const char *	GetNameOfClass () const

DataObjectPointerArraySizeType	GetNumberOfIndexedInputs () const

DataObjectPointerArraySizeType	GetNumberOfInputs () const

DataObjectPointerArraySizeType	GetNumberOfOutputs () const

virtual DataObjectPointerArraySizeType	GetNumberOfValidRequiredInputs () const

NameArray	GetOutputNames () const

virtual const float &	GetProgress ()

NameArray	GetRequiredInputNames () const

bool	HasInput (const DataObjectIdentifierType &key) const

bool	HasOutput (const DataObjectIdentifierType &key) const

virtual DataObjectPointer	MakeOutput (DataObjectPointerArraySizeType idx)

virtual DataObjectPointer	MakeOutput (const DataObjectIdentifierType &)

virtual void	PrepareOutputs ()

virtual void	PropagateRequestedRegion (DataObject *output)

virtual void	ResetPipeline ()

virtual void	SetAbortGenerateData (bool _arg)

virtual void	SetProgress (float _arg)

virtual void	Update ()

virtual void	UpdateLargestPossibleRegion ()

virtual void	UpdateOutputData (DataObject *output)

virtual void	UpdateOutputInformation ()

void	UpdateProgress (float amount)


DataObjectPointerArray	GetInputs ()


DataObjectPointerArray	GetOutputs ()


DataObjectPointerArray	GetIndexedInputs ()


DataObjectPointerArray	GetIndexedOutputs ()

DataObjectPointerArraySizeType	GetNumberOfIndexedOutputs () const


virtual void	SetReleaseDataFlag (bool flag)

virtual bool	GetReleaseDataFlag () const

void	ReleaseDataFlagOn ()

void	ReleaseDataFlagOff ()


virtual void	SetReleaseDataBeforeUpdateFlag (bool _arg)

virtual const bool &	GetReleaseDataBeforeUpdateFlag ()

virtual void	ReleaseDataBeforeUpdateFlagOn ()

virtual void	ReleaseDataBeforeUpdateFlagOff ()


virtual void	SetNumberOfThreads (ThreadIdType _arg)

virtual const ThreadIdType &	GetNumberOfThreads ()

Public Member Functions inherited from itk::Object
unsigned long	AddObserver (const EventObject &event, Command *)

unsigned long	AddObserver (const EventObject &event, Command *) const

virtual LightObject::Pointer	CreateAnother () const

virtual void	DebugOff () const

virtual void	DebugOn () const

Command *	GetCommand (unsigned long tag)

bool	GetDebug () const

MetaDataDictionary &	GetMetaDataDictionary (void)

const MetaDataDictionary &	GetMetaDataDictionary (void) const

virtual ModifiedTimeType	GetMTime () const

virtual const TimeStamp &	GetTimeStamp () const

bool	HasObserver (const EventObject &event) const

void	InvokeEvent (const EventObject &)

void	InvokeEvent (const EventObject &) const

virtual void	Modified () const

virtual void	Register () const

void	RemoveAllObservers ()

void	RemoveObserver (unsigned long tag)

void	SetDebug (bool debugFlag) const

void	SetMetaDataDictionary (const MetaDataDictionary &rhs)

virtual void	SetReferenceCount (int)

virtual void	UnRegister () const

Public Member Functions inherited from itk::LightObject
virtual void	Delete ()

virtual int	GetReferenceCount () const

	itkCloneMacro (Self)

void	Print (std::ostream &os, Indent indent=0) const

Protected Member Functions
virtual void	AddInput (DataObject *input)

virtual void	AddOutput (DataObject *output)

bool	AddRequiredInputName (const DataObjectIdentifierType &)

virtual void	CacheInputReleaseDataFlags ()

virtual void	GenerateData ()

virtual void	GenerateInputRequestedRegion ()

virtual void	GenerateOutputInformation ()

virtual void	GenerateOutputRequestedRegion (DataObject *output)

virtual const DataObjectPointerArraySizeType &	GetNumberOfRequiredOutputs ()

bool	IsIndexedInputName (const DataObjectIdentifierType &) const

bool	IsIndexedOutputName (const DataObjectIdentifierType &) const

bool	IsRequiredInputName (const DataObjectIdentifierType &) const

	itkLegacyMacro (virtual void RemoveInput(DataObject *input))

	itkLegacyMacro (virtual void RemoveOutput(DataObject *output))

	itkLegacyMacro (void SetNumberOfInputs(DataObjectPointerArraySizeType num))

	itkLegacyMacro (void SetNumberOfOutputs(DataObjectPointerArraySizeType num))

DataObjectPointerArraySizeType	MakeIndexFromInputName (const DataObjectIdentifierType &name) const

DataObjectPointerArraySizeType	MakeIndexFromOutputName (const DataObjectIdentifierType &name) const

DataObjectIdentifierType	MakeNameFromInputIndex (DataObjectPointerArraySizeType idx) const

DataObjectIdentifierType	MakeNameFromOutputIndex (DataObjectPointerArraySizeType idx) const

void	PrintSelf (std::ostream &os, Indent indent) const

	ProcessObject ()

virtual void	PropagateResetPipeline ()

virtual void	ReleaseInputs ()

virtual void	RemoveInput (const DataObjectIdentifierType &key)

virtual void	RemoveInput (DataObjectPointerArraySizeType)

virtual void	RemoveOutput (const DataObjectIdentifierType &key)

virtual void	RemoveOutput (DataObjectPointerArraySizeType idx)

bool	RemoveRequiredInputName (const DataObjectIdentifierType &)

virtual void	RestoreInputReleaseDataFlags ()

virtual void	SetInput (const DataObjectIdentifierType &key, DataObject *input)

virtual void	SetNthInput (DataObjectPointerArraySizeType num, DataObject *input)

virtual void	SetNthOutput (DataObjectPointerArraySizeType num, DataObject *output)

void	SetNumberOfIndexedInputs (DataObjectPointerArraySizeType num)

void	SetNumberOfIndexedOutputs (DataObjectPointerArraySizeType num)

virtual void	SetNumberOfRequiredOutputs (DataObjectPointerArraySizeType _arg)

virtual void	SetOutput (const DataObjectIdentifierType &key, DataObject *output)

virtual void	SetPrimaryInput (DataObject *input)

virtual void	SetPrimaryOutput (DataObject *output)

void	SetRequiredInputNames (const NameArray &)

virtual void	VerifyInputInformation ()

virtual void	VerifyPreconditions ()

	~ProcessObject ()


DataObject *	GetInput (const DataObjectIdentifierType &key)

const DataObject *	GetInput (const DataObjectIdentifierType &key) const


DataObject *	GetInput (DataObjectPointerArraySizeType)

const DataObject *	GetInput (DataObjectPointerArraySizeType idx) const


DataObject *	GetPrimaryInput ()

const DataObject *	GetPrimaryInput () const


virtual void	SetPrimaryInputName (const DataObjectIdentifierType &key)

virtual const char *	GetPrimaryInputName () const


DataObject *	GetOutput (const DataObjectIdentifierType &key)

const DataObject *	GetOutput (const DataObjectIdentifierType &key) const


virtual void	SetPrimaryOutputName (const DataObjectIdentifierType &key)

virtual const char *	GetPrimaryOutputName () const


DataObject *	GetOutput (DataObjectPointerArraySizeType idx)

const DataObject *	GetOutput (DataObjectPointerArraySizeType idx) const


DataObject *	GetPrimaryOutput ()

const DataObject *	GetPrimaryOutput () const


virtual void	SetNumberOfRequiredInputs (DataObjectPointerArraySizeType)

virtual const DataObjectPointerArraySizeType &	GetNumberOfRequiredInputs ()


virtual void	PushBackInput (const DataObject *input)

virtual void	PopBackInput ()

virtual void	PushFrontInput (const DataObject *input)

virtual void	PopFrontInput ()

Protected Member Functions inherited from itk::Object
	Object ()

bool	PrintObservers (std::ostream &os, Indent indent) const

virtual void	SetTimeStamp (const TimeStamp &time)

virtual	~Object ()

Protected Member Functions inherited from itk::LightObject
virtual LightObject::Pointer	InternalClone () const

	LightObject ()

virtual void	PrintHeader (std::ostream &os, Indent indent) const

virtual void	PrintTrailer (std::ostream &os, Indent indent) const

virtual	~LightObject ()

Protected Attributes
TimeStamp	m_OutputInformationMTime

bool	m_Updating

Private Types
typedef std::map < DataObjectIdentifierType, DataObjectPointer, NameComparator >	DataObjectPointerMap

typedef std::set < DataObjectIdentifierType, NameComparator >	NameSet

Private Member Functions
bool	IsIndexedName (const DataObjectIdentifierType &) const

DataObjectPointerArraySizeType	MakeIndexFromName (const DataObjectIdentifierType &) const

DataObjectIdentifierType	MakeNameFromIndex (DataObjectPointerArraySizeType) const

void	operator= (const Self &)

	ProcessObject (const Self &)

Friends
class	DataObject

class	DataObjectConstIterator

class	DataObjectIterator

class	InputDataObjectConstIterator

class	InputDataObjectIterator

class	OutputDataObjectConstIterator

class	OutputDataObjectIterator

class	TestProcessObject

Additional Inherited Members
Static Public Member Functions inherited from itk::Object
static bool	GetGlobalWarningDisplay ()

static void	GlobalWarningDisplayOff ()

static void	GlobalWarningDisplayOn ()

static Pointer	New ()

static void	SetGlobalWarningDisplay (bool flag)

Protected Types inherited from itk::LightObject
typedef int	InternalReferenceCountType

Member Typedef Documentation

typedef SmartPointer< const Self > itk::ProcessObject::ConstPointer

Definition at line 119 of file itkProcessObject.h.

typedef DataObject::DataObjectIdentifierType itk::ProcessObject::DataObjectIdentifierType

Definition at line 133 of file itkProcessObject.h.

typedef DataObject::Pointer itk::ProcessObject::DataObjectPointer

Smart Pointer type to a DataObject.

Definition at line 122 of file itkProcessObject.h.

typedef std::vector< DataObjectPointer > itk::ProcessObject::DataObjectPointerArray

STL array of const pointer to the data objects STL array of pointer to the data objects

Definition at line 131 of file itkProcessObject.h.

typedef DataObjectPointerArray::size_type itk::ProcessObject::DataObjectPointerArraySizeType

Definition at line 158 of file itkProcessObject.h.

typedef std::map< DataObjectIdentifierType, DataObjectPointer, NameComparator > itk::ProcessObject::DataObjectPointerMap

private

STL map to store the named inputs and outputs

Definition at line 695 of file itkProcessObject.h.

typedef std::vector< DataObjectIdentifierType > itk::ProcessObject::NameArray

STL array of data object names

Definition at line 136 of file itkProcessObject.h.

typedef std::set< DataObjectIdentifierType, NameComparator > itk::ProcessObject::NameSet

private

STL map to store the named inputs and outputs

Definition at line 711 of file itkProcessObject.h.

typedef SmartPointer< Self > itk::ProcessObject::Pointer

Definition at line 118 of file itkProcessObject.h.

typedef ProcessObject itk::ProcessObject::Self

Standard class typedefs.

Definition at line 116 of file itkProcessObject.h.

typedef Object itk::ProcessObject::Superclass

Definition at line 117 of file itkProcessObject.h.

Constructor & Destructor Documentation

itk::ProcessObject::ProcessObject ( )

protected

itk::ProcessObject::~ProcessObject ( )

protected

itk::ProcessObject::ProcessObject ( const Self & )

private

Member Function Documentation

virtual void itk::ProcessObject::AbortGenerateDataOff ( )

virtual

virtual void itk::ProcessObject::AbortGenerateDataOn ( )

virtual

Turn on and off the AbortGenerateData flag.

virtual void itk::ProcessObject::AddInput ( DataObject * input )

protectedvirtual

virtual void itk::ProcessObject::AddOutput ( DataObject * output )

protectedvirtual

bool itk::ProcessObject::AddRequiredInputName ( const DataObjectIdentifierType & )

protected

virtual void itk::ProcessObject::CacheInputReleaseDataFlags ( )

protectedvirtual

Cache the state of any ReleaseDataFlag's on the inputs. While the filter is executing, we need to set the ReleaseDataFlag's on the inputs to false in case the current filter is implemented using a mini-pipeline (which will try to release the inputs). After the filter finishes, we restore the state of the ReleaseDataFlag's before the call to ReleaseInputs().

virtual void itk::ProcessObject::EnlargeOutputRequestedRegion ( DataObject * )

inlinevirtual

Give the process object a chance to indictate that it will produce more output than it was requested to produce. For example, many imaging filters must compute the entire output at once or can only produce output in complete slices. Such filters cannot handle smaller requested regions. These filters must provide an implementation of this method, setting the output requested region to the size they will produce. By default, a process object does not modify the size of the output requested region.

Definition at line 314 of file itkProcessObject.h.

virtual void itk::ProcessObject::GenerateData ( void )

inlineprotectedvirtual

This method causes the filter to generate its output.

Definition at line 624 of file itkProcessObject.h.

virtual void itk::ProcessObject::GenerateInputRequestedRegion ( )

protectedvirtual

What is the input requested region that is required to produce the output requested region? By default, the largest possible region is always required but this is overridden in many subclasses. For instance, for an image processing filter where an output pixel is a simple function of an input pixel, the input requested region will be set to the output requested region. For an image processing filter where an output pixel is a function of the pixels in a neighborhood of an input pixel, then the input requested region will need to be larger than the output requested region (to avoid introducing artificial boundary conditions). This function should never request an input region that is outside the the input largest possible region (i.e. implementations of this method should crop the input requested region at the boundaries of the input largest possible region).

virtual void itk::ProcessObject::GenerateOutputInformation ( )

protectedvirtual

Generate the information describing the output data. The default implementation of this method will copy information from the input to the output. A filter may override this method if its output will have different information than its input. For instance, a filter that shrinks an image will need to provide an implementation for this method that changes the spacing of the pixels. Such filters should call their superclass' implementation of this method prior to changing the information values they need (i.e. GenerateOutputInformation() should call Superclass::GenerateOutputInformation() prior to changing the information.

virtual void itk::ProcessObject::GenerateOutputRequestedRegion ( DataObject * output )

protectedvirtual

Given one output whose requested region has been set, how should the requested regions for the remaining outputs of the process object be set? By default, all the outputs are set to the same requested region. If a filter needs to produce different requested regions for each output, for instance an image processing filter producing several outputs at different resolutions, then that filter may override this method and set the requested regions appropriatedly.

Note that a filter producing multiple outputs of different types is required to override this method. The default implementation can only correctly handle multiple outputs of the same type.

Reimplemented in itk::watershed::Segmenter< TInputImage >, itk::watershed::Segmenter< InputImageType >, itk::watershed::SegmentTreeGenerator< TScalarType >, itk::watershed::SegmentTreeGenerator< ScalarType >, itk::MultiResolutionPyramidImageFilter< TInputImage, TOutputImage >, itk::watershed::Relabeler< TScalarType, TImageDimension >, itk::watershed::Relabeler< ScalarType, itkGetStaticConstMacro(ImageDimension) >, itk::watershed::BoundaryResolver< TPixelType, TDimension >, itk::watershed::EquivalenceRelabeler< TScalarType, TImageDimension >, itk::VideoToVideoFilter< TInputVideoStream, TOutputVideoStream >, itk::VideoToVideoFilter< itk::VideoStream< TImageToImageFilter::InputImageType >, itk::VideoStream< TImageToImageFilter::OutputImageType > >, itk::VideoToVideoFilter< TVideoStream, TVideoStream >, itk::RecursiveMultiResolutionPyramidImageFilter< TInputImage, TOutputImage >, and itk::TemporalProcessObject.

virtual const bool& itk::ProcessObject::GetAbortGenerateData ( )

virtual

Get the AbortGenerateData flag for the process object. Process objects may handle premature termination of execution in different ways.

DataObjectPointerArray itk::ProcessObject::GetIndexedInputs ( )

Return an array with all the inputs of this process object. This is useful for tracing back in the pipeline to construct graphs etc.

DataObjectPointerArray itk::ProcessObject::GetIndexedOutputs ( )

Return an array with all the outputs of this process object. This is useful for tracing forward in the pipeline to contruct graphs etc.

DataObject* itk::ProcessObject::GetInput ( const DataObjectIdentifierType & key )

protected

Return an input

const DataObject* itk::ProcessObject::GetInput ( const DataObjectIdentifierType & key ) const

protected

Return an input

DataObject* itk::ProcessObject::GetInput ( DataObjectPointerArraySizeType )

protected

Method used internally for getting an indexed input.

const DataObject* itk::ProcessObject::GetInput ( DataObjectPointerArraySizeType idx ) const

protected

Method used internally for getting an indexed input.

NameArray itk::ProcessObject::GetInputNames ( ) const

Return a array with the names of the inputs of this process object. The names are ordered lexicographically, and match the order of the data object produced by GetInputs()

DataObjectPointerArray itk::ProcessObject::GetInputs ( )

Return a array with the named inputs of this process object. The order of the inputs match the order of the input names produced by GetInputNames()

MultiThreader* itk::ProcessObject::GetMultiThreader ( ) const

inline

Return the multithreader used by this class.

Definition at line 371 of file itkProcessObject.h.

virtual const char* itk::ProcessObject::GetNameOfClass ( ) const

virtual

Run-time type information (and related methods).

Reimplemented from itk::Object.

Referenced by itk::XMLFilterWatcher::StartFilter().

DataObjectPointerArraySizeType itk::ProcessObject::GetNumberOfIndexedInputs ( ) const

Get the size of the input vector. This is merely the size of the input vector, not the number of inputs that have valid DataObject's assigned. Use GetNumberOfValidRequiredInputs() to determine how many indexed inputs are non-null.

DataObjectPointerArraySizeType itk::ProcessObject::GetNumberOfIndexedOutputs ( ) const

Return an array with all the outputs of this process object. This is useful for tracing forward in the pipeline to contruct graphs etc.

DataObjectPointerArraySizeType itk::ProcessObject::GetNumberOfInputs ( ) const

inline

Get the size of the input container. This is merely the size of the input vector, not the number of inputs that have valid DataObject's assigned. Use GetNumberOfValidRequiredInputs() to determine how many inputs are non-null.

Definition at line 164 of file itkProcessObject.h.

DataObjectPointerArraySizeType itk::ProcessObject::GetNumberOfOutputs ( ) const

inline

Definition at line 167 of file itkProcessObject.h.

virtual const DataObjectPointerArraySizeType& itk::ProcessObject::GetNumberOfRequiredInputs ( )

protectedvirtual

Set the number of required indexed inputs. If an input is added with AddRequiredInputName it should not be considered in this count.

virtual const DataObjectPointerArraySizeType& itk::ProcessObject::GetNumberOfRequiredOutputs ( )

protectedvirtual

virtual const ThreadIdType& itk::ProcessObject::GetNumberOfThreads ( )

virtual

Get/Set the number of threads to create when executing.

virtual DataObjectPointerArraySizeType itk::ProcessObject::GetNumberOfValidRequiredInputs ( ) const

virtual

Get the number of valid indexed inputs. This method is used to determine whether the necessary required inputs have been set.

Reimplemented in itk::MultiResolutionPDEDeformableRegistration< TFixedImage, TMovingImage, TDisplacementField, TRealType >, and itk::PDEDeformableRegistrationFilter< TFixedImage, TMovingImage, TDisplacementField >.

DataObject* itk::ProcessObject::GetOutput ( const DataObjectIdentifierType & key )

protected

Return an output

Referenced by itk::watershed::Segmenter< InputImageType >::GetBoundary(), itk::BlockMatchingImageFilter< TFixedImage, TMovingImage, TFeatures, TDisplacements, TSimilarities >::GetDisplacements(), itk::watershed::BoundaryResolver< TPixelType, TDimension >::GetEquivalencyTable(), itk::Testing::HashImageFilter< TImageType >::GetHashOutput(), itk::HistogramThresholdCalculator< THistogram, TOutput >::GetOutput(), itk::watershed::EquivalenceRelabeler< TScalarType, TImageDimension >::GetOutputImage(), itk::watershed::Relabeler< ScalarType, itkGetStaticConstMacro(ImageDimension) >::GetOutputImage(), itk::watershed::Segmenter< InputImageType >::GetOutputImage(), itk::watershed::SegmentTreeGenerator< ScalarType >::GetOutputSegmentTree(), itk::watershed::Segmenter< InputImageType >::GetSegmentTable(), itk::BlockMatchingImageFilter< TFixedImage, TMovingImage, TFeatures, TDisplacements, TSimilarities >::GetSimilarities(), and itk::HistogramThresholdCalculator< THistogram, TOutput >::GetThreshold().

const DataObject* itk::ProcessObject::GetOutput ( const DataObjectIdentifierType & key ) const

protected

Return an output

DataObject* itk::ProcessObject::GetOutput ( DataObjectPointerArraySizeType idx )

protected

Method used internally for getting an indexed output.

const DataObject* itk::ProcessObject::GetOutput ( DataObjectPointerArraySizeType idx ) const

protected

Method used internally for getting an indexed output.

NameArray itk::ProcessObject::GetOutputNames ( ) const

Return a array with the names of the outputs of this process object. The names are ordered lexicographically, and match the order of the data object produced by GetOutputs()

DataObjectPointerArray itk::ProcessObject::GetOutputs ( )

Return a array with the named outputs of this process object. The order of the outputs match the order of the input names produced by GetOutputNames()

DataObject* itk::ProcessObject::GetPrimaryInput ( )

protected

Return the main input

const DataObject* itk::ProcessObject::GetPrimaryInput ( ) const

protected

Return the main input

virtual const char* itk::ProcessObject::GetPrimaryInputName ( ) const

protectedvirtual

Set/Get the name associated with the Primary output. Defaults to "Primary".

DataObject* itk::ProcessObject::GetPrimaryOutput ( )

protected

Return the main output

const DataObject* itk::ProcessObject::GetPrimaryOutput ( ) const

protected

Return the main output

virtual const char* itk::ProcessObject::GetPrimaryOutputName ( ) const

protectedvirtual

Set/Get the name associated with the Primary output. Defaults to "Primary".

virtual const float& itk::ProcessObject::GetProgress ( )

virtual

Get the execution progress of a process object. The progress is a floating number in [0,1] with 0 meaning no progress and 1 meaning the filter has completed execution.

Referenced by itk::XMLFilterWatcher::ShowProgress().

virtual const bool& itk::ProcessObject::GetReleaseDataBeforeUpdateFlag ( )

virtual

Turn on/off the flags to control whether the bulk data belonging to the outputs of this ProcessObject are released/reallocated during an Update(). In limited memory scenarios, a user may want to force the elements of a pipeline to release any bulk data that is going to be regenerated anyway during an Update() in order to control peak memory allocation. Note that this flag is different from the ReleaseDataFlag. ReleaseDataFlag manages the deallocation of a ProcessObject's bulk output data once that data has been consumed by a downstream ProcessObject. The ReleaseDataBeforeUpdateFlag manages the deallocation/reallocation of bulk data during a pipeline update to control peak memory utilization. Default value is on.

virtual bool itk::ProcessObject::GetReleaseDataFlag ( ) const

virtual

Turn on/off the flags to control whether the bulk data belonging to the outputs of this ProcessObject are released after being used by a downstream ProcessObject. Default value is off. Another options for controlling memory utilization is the ReleaseDataBeforeUpdateFlag.

NameArray itk::ProcessObject::GetRequiredInputNames ( ) const

Return an array with the names of the required inputs

bool itk::ProcessObject::HasInput ( const DataObjectIdentifierType & key ) const

Return true if the input with this name exists

bool itk::ProcessObject::HasOutput ( const DataObjectIdentifierType & key ) const

Return true if the output with this name exists

bool itk::ProcessObject::IsIndexedInputName ( const DataObjectIdentifierType & ) const

protected

bool itk::ProcessObject::IsIndexedName ( const DataObjectIdentifierType & ) const

private

bool itk::ProcessObject::IsIndexedOutputName ( const DataObjectIdentifierType & ) const

protected

bool itk::ProcessObject::IsRequiredInputName ( const DataObjectIdentifierType & ) const

protected

itk::ProcessObject::itkLegacyMacro ( virtual void RemoveInputDataObject *input )

protected

Remove an indexed input.

Deprecated:: use RemoveInput(unsigned int) instead

itk::ProcessObject::itkLegacyMacro ( virtual void RemoveOutputDataObject *output )

protected

Deprecated:: use RemoveOutput(unsigned int) instead

itk::ProcessObject::itkLegacyMacro ( void SetNumberOfInputsDataObjectPointerArraySizeType num )

protected

Deprecated:: use SetNumberOfIndexedInputs() instead

itk::ProcessObject::itkLegacyMacro ( void SetNumberOfOutputsDataObjectPointerArraySizeType num )

protected

Deprecated:: use SetNumberOfIndexedInputs() instead

DataObjectPointerArraySizeType itk::ProcessObject::MakeIndexFromInputName ( const DataObjectIdentifierType & name ) const

protected

DataObjectPointerArraySizeType itk::ProcessObject::MakeIndexFromName ( const DataObjectIdentifierType & ) const

private

DataObjectPointerArraySizeType itk::ProcessObject::MakeIndexFromOutputName ( const DataObjectIdentifierType & name ) const

protected

DataObjectIdentifierType itk::ProcessObject::MakeNameFromIndex ( DataObjectPointerArraySizeType ) const

private

DataObjectIdentifierType itk::ProcessObject::MakeNameFromInputIndex ( DataObjectPointerArraySizeType idx ) const

protected

DataObjectIdentifierType itk::ProcessObject::MakeNameFromOutputIndex ( DataObjectPointerArraySizeType idx ) const

protected

virtual DataObjectPointer itk::ProcessObject::MakeOutput ( DataObjectPointerArraySizeType idx )

virtual

Make a DataObject of the correct type to used as the specified output. Every ProcessObject subclass must be able to create a DataObject that can be used as a specified output. This method is automatically called when DataObject::DisconnectPipeline() is called. DataObject::DisconnectPipeline, disconnects a data object from being an output of its current source. When the data object is disconnected, the ProcessObject needs to construct a replacement output data object so that the ProcessObject is in a valid state. So DataObject::DisconnectPipeline eventually calls ProcessObject::MakeOutput. Note that MakeOutput always returns a itkSmartPointer to a DataObject. ImageSource and MeshSource override this method to create the correct type of image and mesh respectively. If a filter has multiple outputs of different types, then that filter must provide an implementation of MakeOutput().

virtual DataObjectPointer itk::ProcessObject::MakeOutput ( const DataObjectIdentifierType & )

virtual

Make a DataObject of the correct type to used as the specified output. Every ProcessObject subclass must be able to create a DataObject that can be used as a specified output. This method is automatically called when DataObject::DisconnectPipeline() is called. DataObject::DisconnectPipeline, disconnects a data object from being an output of its current source. When the data object is disconnected, the ProcessObject needs to construct a replacement output data object so that the ProcessObject is in a valid state. So DataObject::DisconnectPipeline eventually calls ProcessObject::MakeOutput. Note that MakeOutput always returns a itkSmartPointer to a DataObject. ImageSource and MeshSource override this method to create the correct type of image and mesh respectively. If a filter has multiple outputs of different types, then that filter must provide an implementation of MakeOutput().

void itk::ProcessObject::operator= ( const Self & )

private

virtual void itk::ProcessObject::PopBackInput ( )

protectedvirtual

Push/Pop an indexed input of this process object. These methods allow a filter to model its input vector as a queue or stack. These routines may not be appropriate for all filters, especially filters with different types of inputs. These routines follow the semantics of STL.

virtual void itk::ProcessObject::PopFrontInput ( )

protectedvirtual

Push/Pop an indexed input of this process object. These methods allow a filter to model its input vector as a queue or stack. These routines may not be appropriate for all filters, especially filters with different types of inputs. These routines follow the semantics of STL.

virtual void itk::ProcessObject::PrepareOutputs ( )

virtual

An opportunity to deallocate a ProcessObject's bulk data storage. Some filters may wish to reuse existing bulk data storage to avoid unnecessary deallocation/allocation sequences. The default implementation calls Initialize() on each output. DataObject::Initialize() frees its bulk data by default.

Reimplemented in itk::WatershedImageFilter< TInputImage >.

void itk::ProcessObject::PrintSelf	(	std::ostream &	os,
		Indent	indent
	)		const

protectedvirtual

Methods invoked by Print() to print information about the object including superclasses. Typically not called by the user (use Print() instead) but used in the hierarchical print process to combine the output of several classes.

Reimplemented from itk::Object.

virtual void itk::ProcessObject::PropagateRequestedRegion ( DataObject * output )

virtual

Send the requested region information back up the pipeline (to the filters that precede this one).

Reimplemented in itk::VTKImageImport< TOutputImage >, itk::PipelineMonitorImageFilter< TImageType >, and itk::StreamingImageFilter< TInputImage, TOutputImage >.

virtual void itk::ProcessObject::PropagateResetPipeline ( )

protectedvirtual

Called to allocate the input array. Copies old inputs. Propagate a call to ResetPipeline() up the pipeline. Called only from DataObject.

virtual void itk::ProcessObject::PushBackInput ( const DataObject * input )

protectedvirtual

Push/Pop an indexed input of this process object. These methods allow a filter to model its input vector as a queue or stack. These routines may not be appropriate for all filters, especially filters with different types of inputs. These routines follow the semantics of STL.

virtual void itk::ProcessObject::PushFrontInput ( const DataObject * input )

protectedvirtual

Push/Pop an indexed input of this process object. These methods allow a filter to model its input vector as a queue or stack. These routines may not be appropriate for all filters, especially filters with different types of inputs. These routines follow the semantics of STL.

virtual void itk::ProcessObject::ReleaseDataBeforeUpdateFlagOff ( )

virtual

Turn on/off the flags to control whether the bulk data belonging to the outputs of this ProcessObject are released/reallocated during an Update(). In limited memory scenarios, a user may want to force the elements of a pipeline to release any bulk data that is going to be regenerated anyway during an Update() in order to control peak memory allocation. Note that this flag is different from the ReleaseDataFlag. ReleaseDataFlag manages the deallocation of a ProcessObject's bulk output data once that data has been consumed by a downstream ProcessObject. The ReleaseDataBeforeUpdateFlag manages the deallocation/reallocation of bulk data during a pipeline update to control peak memory utilization. Default value is on.

virtual void itk::ProcessObject::ReleaseDataBeforeUpdateFlagOn ( )

virtual

Turn on/off the flags to control whether the bulk data belonging to the outputs of this ProcessObject are released/reallocated during an Update(). In limited memory scenarios, a user may want to force the elements of a pipeline to release any bulk data that is going to be regenerated anyway during an Update() in order to control peak memory allocation. Note that this flag is different from the ReleaseDataFlag. ReleaseDataFlag manages the deallocation of a ProcessObject's bulk output data once that data has been consumed by a downstream ProcessObject. The ReleaseDataBeforeUpdateFlag manages the deallocation/reallocation of bulk data during a pipeline update to control peak memory utilization. Default value is on.

void itk::ProcessObject::ReleaseDataFlagOff ( )

inline

Turn on/off the flags to control whether the bulk data belonging to the outputs of this ProcessObject are released after being used by a downstream ProcessObject. Default value is off. Another options for controlling memory utilization is the ReleaseDataBeforeUpdateFlag.

Definition at line 345 of file itkProcessObject.h.

void itk::ProcessObject::ReleaseDataFlagOn ( )

inline

Turn on/off the flags to control whether the bulk data belonging to the outputs of this ProcessObject are released after being used by a downstream ProcessObject. Default value is off. Another options for controlling memory utilization is the ReleaseDataBeforeUpdateFlag.

Definition at line 344 of file itkProcessObject.h.

virtual void itk::ProcessObject::ReleaseInputs ( )

protectedvirtual

A filter may need to release its input's bulk data after it has finished calculating a new output. The filter may need to release the inputs because the user has turned on the ReleaseDataFlag or it may need to release the inputs because the filter is an "in place" filter and it has overwritten its input with its output data. The implementation here simply checks the ReleaseDataFlag of the inputs. InPlaceImageFilter overrides this method so release the input it has overwritten.

See Also: InPlaceImageFilter::ReleaseInputs()

virtual void itk::ProcessObject::RemoveInput ( const DataObjectIdentifierType & key )

protectedvirtual

Remove an input

virtual void itk::ProcessObject::RemoveInput ( DataObjectPointerArraySizeType )

protectedvirtual

Remove an indexed input

virtual void itk::ProcessObject::RemoveOutput ( const DataObjectIdentifierType & key )

protectedvirtual

Remove an output

virtual void itk::ProcessObject::RemoveOutput ( DataObjectPointerArraySizeType idx )

protectedvirtual

bool itk::ProcessObject::RemoveRequiredInputName ( const DataObjectIdentifierType & )

protected

virtual void itk::ProcessObject::ResetPipeline ( )

virtual

Reset the pipeline. If an exception is thrown during an Update(), the pipeline may be in an inconsistent state. This method clears the internal state of the pipeline so Update() can be called.

virtual void itk::ProcessObject::RestoreInputReleaseDataFlags ( )

protectedvirtual

Restore the cached input ReleaseDataFlags.

virtual void itk::ProcessObject::SetAbortGenerateData ( bool _arg )

virtual

Set the AbortGenerateData flag for the process object. Process objects may handle premature termination of execution in different ways.

virtual void itk::ProcessObject::SetInput	(	const DataObjectIdentifierType &	key,
		DataObject *	input
	)

protectedvirtual

Set an input

virtual void itk::ProcessObject::SetNthInput	(	DataObjectPointerArraySizeType	num,
		DataObject *	input
	)

protectedvirtual

Protected methods for setting indexed inputs. Subclasses make use of them for setting input.

Referenced by itk::watershed::BoundaryResolver< TPixelType, TDimension >::SetBoundaryA(), itk::watershed::BoundaryResolver< TPixelType, TDimension >::SetBoundaryB(), itk::watershed::EquivalenceRelabeler< TScalarType, TImageDimension >::SetEquivalencyTable(), itk::NarrowBandLevelSetImageFilter< TInputImage, TFeatureImage, TOutputPixelType, Image< TOutputPixelType, TInputImage::ImageDimension > >::SetFeatureImage(), itk::SegmentationLevelSetImageFilter< TInputImage, TFeatureImage, TOutputPixelType >::SetFeatureImage(), itk::HistogramThresholdCalculator< THistogram, TOutput >::SetInput(), itk::WatershedImageFilter< TInputImage >::SetInput(), itk::watershed::SegmentTreeGenerator< ScalarType >::SetInputEquivalencyTable(), itk::watershed::EquivalenceRelabeler< TScalarType, TImageDimension >::SetInputImage(), itk::watershed::Relabeler< ScalarType, itkGetStaticConstMacro(ImageDimension) >::SetInputImage(), itk::watershed::Segmenter< InputImageType >::SetInputImage(), itk::watershed::SegmentTreeGenerator< ScalarType >::SetInputSegmentTable(), itk::watershed::Relabeler< ScalarType, itkGetStaticConstMacro(ImageDimension) >::SetInputSegmentTree(), itk::ChangeInformationImageFilter< TInputImage >::SetReferenceImage(), and itk::DiffusionTensor3DReconstructionImageFilter< TReferenceImagePixelType, TGradientImagePixelType, TTensorPixelType, TMaskImageType >::SetReferenceImage().

virtual void itk::ProcessObject::SetNthOutput	(	DataObjectPointerArraySizeType	num,
		DataObject *	output
	)

protectedvirtual

Protected methods for setting outputs. Subclasses make use of them for getting output.

Referenced by itk::watershed::BoundaryResolver< TPixelType, TDimension >::BoundaryResolver(), itk::watershed::EquivalenceRelabeler< TScalarType, TImageDimension >::EquivalenceRelabeler(), itk::HistogramThresholdCalculator< THistogram, TOutput >::HistogramThresholdCalculator(), itk::watershed::Segmenter< InputImageType >::SetBoundary(), itk::watershed::BoundaryResolver< TPixelType, TDimension >::SetEquivalencyTable(), itk::watershed::EquivalenceRelabeler< TScalarType, TImageDimension >::SetOutputImage(), itk::watershed::Relabeler< ScalarType, itkGetStaticConstMacro(ImageDimension) >::SetOutputImage(), itk::watershed::Segmenter< InputImageType >::SetOutputImage(), and itk::watershed::Segmenter< InputImageType >::SetSegmentTable().

void itk::ProcessObject::SetNumberOfIndexedInputs ( DataObjectPointerArraySizeType num )

protected

Define the number of indexed inputs defined for this process. The new indexed inputs are considered to be NULL.

void itk::ProcessObject::SetNumberOfIndexedOutputs ( DataObjectPointerArraySizeType num )

protected

Called to allocate the output array. Copies old outputs.

virtual void itk::ProcessObject::SetNumberOfRequiredInputs ( DataObjectPointerArraySizeType )

protectedvirtual

Set the number of required indexed inputs. If an input is added with AddRequiredInputName it should not be considered in this count.

virtual void itk::ProcessObject::SetNumberOfRequiredOutputs ( DataObjectPointerArraySizeType _arg )

protectedvirtual

Referenced by itk::HistogramThresholdCalculator< THistogram, TOutput >::HistogramThresholdCalculator().

virtual void itk::ProcessObject::SetNumberOfThreads ( ThreadIdType _arg )

virtual

Get/Set the number of threads to create when executing.

Reimplemented in itk::SmoothingRecursiveGaussianImageFilter< TInputImage, TOutputImage >, itk::GradientMagnitudeRecursiveGaussianImageFilter< TInputImage, TOutputImage >, itk::GrayscaleDilateImageFilter< TInputImage, TOutputImage, TKernel >, itk::GrayscaleErodeImageFilter< TInputImage, TOutputImage, TKernel >, itk::MiniPipelineSeparableImageFilter< TInputImage, TOutputImage, TFilter >, and itk::MiniPipelineSeparableImageFilter< TInputImage, TOutputImage, RankImageFilter< TInputImage, TInputImage, FlatStructuringElement< TInputImage::ImageDimension > > >.

virtual void itk::ProcessObject::SetOutput	(	const DataObjectIdentifierType &	key,
		DataObject *	output
	)

protectedvirtual

Set an output

virtual void itk::ProcessObject::SetPrimaryInput ( DataObject * input )

protectedvirtual

Set the main input

virtual void itk::ProcessObject::SetPrimaryInputName ( const DataObjectIdentifierType & key )

protectedvirtual

Set/Get the name associated with the Primary output. Defaults to "Primary".

virtual void itk::ProcessObject::SetPrimaryOutput ( DataObject * output )

protectedvirtual

Set the main output

virtual void itk::ProcessObject::SetPrimaryOutputName ( const DataObjectIdentifierType & key )

protectedvirtual

Set/Get the name associated with the Primary output. Defaults to "Primary".

virtual void itk::ProcessObject::SetProgress ( float _arg )

virtual

Set the execution progress of a process object. The progress is a floating number in [0,1] with 0 meaning no progress and 1 meaning the filter has completed execution. The ProgressEvent is NOT invoked.

virtual void itk::ProcessObject::SetReleaseDataBeforeUpdateFlag ( bool _arg )

virtual

Turn on/off the flags to control whether the bulk data belonging to the outputs of this ProcessObject are released/reallocated during an Update(). In limited memory scenarios, a user may want to force the elements of a pipeline to release any bulk data that is going to be regenerated anyway during an Update() in order to control peak memory allocation. Note that this flag is different from the ReleaseDataFlag. ReleaseDataFlag manages the deallocation of a ProcessObject's bulk output data once that data has been consumed by a downstream ProcessObject. The ReleaseDataBeforeUpdateFlag manages the deallocation/reallocation of bulk data during a pipeline update to control peak memory utilization. Default value is on.

virtual void itk::ProcessObject::SetReleaseDataFlag ( bool flag )

virtual

Turn on/off the flags to control whether the bulk data belonging to the outputs of this ProcessObject are released after being used by a downstream ProcessObject. Default value is off. Another options for controlling memory utilization is the ReleaseDataBeforeUpdateFlag.

void itk::ProcessObject::SetRequiredInputNames ( const NameArray & )

protected

virtual void itk::ProcessObject::Update ( )

virtual

Bring this filter up-to-date. Update() checks modified times against last execution times, and re-executes objects if necessary. A side effect of this method is that the whole pipeline may execute in order to bring this filter up-to-date. This method updates the currently prescribed requested region. If no requested region has been set on the output, then the requested region will be set to the largest possible region. Once the requested region is set, Update() will make sure the specified requested region is up-to-date. This is a confusing side effect to users who are just calling Update() on a filter. A first call to Update() will cause the largest possible region to be updated. A second call to Update() will update that same region. If a modification to the upstream pipeline cause a filter to have a different largest possible region, this second call to Update() will not cause the output requested region to be reset to the new largest possible region. Instead, the output requested region will be the same as the last time Update() was called. To have a filter always to produce its largest possible region, users should call UpdateLargestPossibleRegion() instead.

Reimplemented in itk::ImageFileWriter< TInputImage >, itk::MeshFileWriter< TInputMesh >, itk::ImageSeriesWriter< TInputImage, TOutputImage >, and itk::VideoFileWriter< TInputVideoStream >.

virtual void itk::ProcessObject::UpdateLargestPossibleRegion ( )

virtual

Like Update(), but sets the output requested region to the largest possible region for the output. This is the method users should call if they want the entire dataset to be processed. If a user wants to update the same output region as a previous call to Update() or a previous call to UpdateLargestPossibleRegion(), then they should call the method Update().

Reimplemented in itk::ImageFileWriter< TInputImage >, and itk::VideoFileWriter< TInputVideoStream >.

virtual void itk::ProcessObject::UpdateOutputData ( DataObject * output )

virtual

Actually generate new output

Reimplemented in itk::FFTWComplexToComplexImageFilter< TImage >, itk::TemporalProcessObject, itk::FFTWForwardFFTImageFilter< TInputImage, TOutputImage >, itk::FFTWRealToHalfHermitianForwardFFTImageFilter< TInputImage, TOutputImage >, itk::FFTWHalfHermitianToRealInverseFFTImageFilter< TInputImage, TOutputImage >, and itk::StreamingImageFilter< TInputImage, TOutputImage >.

virtual void itk::ProcessObject::UpdateOutputInformation ( )

virtual

Update the information describing the output data. This method transverses up the pipeline gathering modified time information. On the way back down the pipeline, this method calls GenerateOutputInformation() to set any necessary information about the output data objects. For instance, a filter that shrinks an image will need to provide an implementation for GenerateOutputInformation() that changes the spacing of the pixels. Such filters should call their superclass' implementation of GenerateOutputInformation prior to changing the information values they need (i.e. GenerateOutputInformation() should call Superclass::GenerateOutputInformation() prior to changing the information.

Reimplemented in itk::watershed::Segmenter< TInputImage >, itk::watershed::Segmenter< InputImageType >, itk::VTKImageImport< TOutputImage >, itk::TemporalProcessObject, itk::VideoToVideoFilter< TInputVideoStream, TOutputVideoStream >, itk::VideoToVideoFilter< itk::VideoStream< TImageToImageFilter::InputImageType >, itk::VideoStream< TImageToImageFilter::OutputImageType > >, itk::VideoToVideoFilter< TVideoStream, TVideoStream >, and itk::VideoFileReader< TOutputVideoStream >.

void itk::ProcessObject::UpdateProgress ( float amount )

Update the progress of the process object.

Sets the Progress ivar to amount and invokes any observers for the ProgressEvent. The parameter amount should be in [0,1] and is the cumulative (not incremental) progress.

virtual void itk::ProcessObject::VerifyInputInformation ( )

protectedvirtual

Verifies that the inputs meta-data is consistent and valid for continued execution of the pipeline, throws an exception if not valid.

This method is called immediately before GenerateOutputInformation().

The ProcessObject implementation does nothing. Subclasses might check if all the inputs are in the same coordinate frame.

virtual void itk::ProcessObject::VerifyPreconditions ( )

protectedvirtual

Verifies that the process object has been configured correctly, that all required inputs are set, and needed parameters are set appropriately. If not valid an exceptions will be thrown.

This method is called before UpdateOutputInformation is propagated to the inputs.

The ProcessObject's implementation verifies that the NumberOfRequiredInputs are set and not null.

Reimplemented in itk::RecursiveGaussianImageFilter< TInputImage, TOutputImage >, and itk::ScalarImageKmeansImageFilter< TInputImage, TOutputImage >.

Friends And Related Function Documentation

friend class DataObject

friend

Friends of ProcessObject

Definition at line 733 of file itkProcessObject.h.

friend class DataObjectConstIterator

friend

Definition at line 735 of file itkProcessObject.h.

friend class DataObjectIterator

friend

Definition at line 739 of file itkProcessObject.h.

friend class InputDataObjectConstIterator

friend

Definition at line 736 of file itkProcessObject.h.

friend class InputDataObjectIterator

friend

Definition at line 740 of file itkProcessObject.h.

friend class OutputDataObjectConstIterator

friend

Definition at line 737 of file itkProcessObject.h.

friend class OutputDataObjectIterator

friend

Definition at line 741 of file itkProcessObject.h.

friend class TestProcessObject

friend

Definition at line 743 of file itkProcessObject.h.

Member Data Documentation

bool itk::ProcessObject::m_AbortGenerateData

private

These support the progress method and aborting filter execution.

Definition at line 721 of file itkProcessObject.h.

std::map< DataObjectIdentifierType, bool > itk::ProcessObject::m_CachedInputReleaseDataFlags

private

An array that caches the ReleaseDataFlags of the inputs

Definition at line 702 of file itkProcessObject.h.

DataObjectPointerMap itk::ProcessObject::m_Inputs

private

Named input and outputs containers

Definition at line 698 of file itkProcessObject.h.

Referenced by itk::InputDataObjectConstIterator::InputDataObjectConstIterator(), and itk::InputDataObjectIterator::InputDataObjectIterator().

DataObjectPointerArraySizeType itk::ProcessObject::m_NumberOfIndexedInputs

private

Definition at line 704 of file itkProcessObject.h.

DataObjectPointerArraySizeType itk::ProcessObject::m_NumberOfIndexedOutputs

private

Definition at line 705 of file itkProcessObject.h.

DataObjectPointerArraySizeType itk::ProcessObject::m_NumberOfRequiredInputs

private

Definition at line 707 of file itkProcessObject.h.

DataObjectPointerArraySizeType itk::ProcessObject::m_NumberOfRequiredOutputs

private

Definition at line 708 of file itkProcessObject.h.

ThreadIdType itk::ProcessObject::m_NumberOfThreads

private

Definition at line 727 of file itkProcessObject.h.

TimeStamp itk::ProcessObject::m_OutputInformationMTime

protected

Time when GenerateOutputInformation was last called.

Definition at line 668 of file itkProcessObject.h.

DataObjectPointerMap itk::ProcessObject::m_Outputs

private

Definition at line 699 of file itkProcessObject.h.

Referenced by itk::OutputDataObjectConstIterator::OutputDataObjectConstIterator(), and itk::OutputDataObjectIterator::OutputDataObjectIterator().

DataObjectIdentifierType itk::ProcessObject::m_PrimaryInputName

private

The name associated with the Primary input or output. Defaults to "Primary".

Definition at line 717 of file itkProcessObject.h.

DataObjectIdentifierType itk::ProcessObject::m_PrimaryOutputName

private

Definition at line 718 of file itkProcessObject.h.

float itk::ProcessObject::m_Progress

private

Definition at line 722 of file itkProcessObject.h.

bool itk::ProcessObject::m_ReleaseDataBeforeUpdateFlag

private

Memory management ivars

Definition at line 730 of file itkProcessObject.h.

NameSet itk::ProcessObject::m_RequiredInputNames

private

The required inputs

Definition at line 714 of file itkProcessObject.h.

MultiThreader::Pointer itk::ProcessObject::m_Threader

private

Support processing data in multiple threads. Used by subclasses (e.g., ImageSource).

Definition at line 726 of file itkProcessObject.h.

bool itk::ProcessObject::m_Updating

protected

These ivars are made protected so filters like itkStreamingImageFilter can access them directly. This flag indicates when the pipeline is executing. It prevents infinite recursion when pipelines have loops.

Definition at line 665 of file itkProcessObject.h.

The documentation for this class was generated from the following file:

itkProcessObject.h

Private Attributes
bool	m_AbortGenerateData

std::map < DataObjectIdentifierType, bool >	m_CachedInputReleaseDataFlags

DataObjectPointerMap	m_Inputs

DataObjectPointerArraySizeType	m_NumberOfIndexedInputs

DataObjectPointerArraySizeType	m_NumberOfIndexedOutputs

DataObjectPointerArraySizeType	m_NumberOfRequiredInputs

DataObjectPointerArraySizeType	m_NumberOfRequiredOutputs

ThreadIdType	m_NumberOfThreads

DataObjectPointerMap	m_Outputs

DataObjectIdentifierType	m_PrimaryInputName

DataObjectIdentifierType	m_PrimaryOutputName

float	m_Progress

bool	m_ReleaseDataBeforeUpdateFlag

NameSet	m_RequiredInputNames

MultiThreader::Pointer	m_Threader

Detailed Description

Classes

Public Types

Public Member Functions

Protected Member Functions

Protected Attributes

Private Types

Private Member Functions

Private Attributes

Friends

Additional Inherited Members

Member Typedef Documentation

Constructor & Destructor Documentation

Member Function Documentation

Friends And Related Function Documentation

Member Data Documentation